OptiPlex 745 Ram sticks
I got 4 sticks of memory, then my computer stopped to reach the office. I reinstalled and nothing. Then I started to remove the ram. It appears 3 sticks work very well but the 4th does not work. My question, if I want to replace this stick of memory, why online memory sellers indicate buy 2. for this computer. I only need 1 stick. This computer has a duty of memory that insists on 2 sticks? I will have to remove one ram stick works just to make room for a new stick?
SpeedStep is quite right, and that's why sellers of memory will tell you buy RAM in pairs for an Optiplex 745.
However, in your case, that you could buy just 1 "stick" If YOU BUY the EXACT SAME DIMM (stick), AS THE ONE THAT DIED.
It is also sometimes possible to mix 2 DIMM RAM ('stick') which are almost the same, but just a little different, in the same channel (white or black slots) and get away with it. I do not recommend for you and it's something I usually stay away.
So, here are your options:
1 - Stay with your work DIMMs = 3 you have less RAM
2. get the exact same DIMMS that one who died = RAM same as before
3. get a pair of DIMMs either new or second-hand = change maybe, maybe not
You have not told us if you have a minitour 745, office or SFF. You can't have a USFF because that has only 2 DIMM slots. You also do not have told us that the DIMM size, it's that you have in your machine. I guess it might be 2 GB, 1 GB or maybe 512 MB.
Your machine is a bit old, and you can upgrade to a newer model. It doesn't have to be a new machine. You could get a 790 Optiplex opportunity or whatever... just something more recent.
If you want to stay with the 745 and you had an of DIMMS of 1 GB on you then you could possibly spend this channel to 2 GB DIMMs. This means that you buy 2 DIMM and you would have an extra (needless) 1 GB DIMMS on you hands after the upgrade. I hope that you do not have 512 MB DIMM.
You have options...
Option 1 to stay with 3 DIMMs is not such a good. As a general rule, a dual channel as your motherboard will be happy with an odd number of DIMM if there is just 1 DIMMS plugged into the Board of Directors. 3 DIMMs in this kinda mobo can easily stop the mobo to boot. If yours starts with 3, then it of at least partially OK with this config and could be totally OK with it. I suppose it could be possible so that it starts and yet still ignore the 3rd DIMM. You will need to check with the OS.
Option 2 to replace the DIMM module dead with another of the [exact] same is good enough. You can most likely get another DIMM used on eBay or Amazon or. Both have good collateral. If you receive a non-working DIMMS (unlikely) you either get your money back or you get one other DIMM, but you have to complain to the seller/eBay/Amazon to get the replacement DIMM. It may or may not be difficult to find a new exact replacement for your dead DIMM. It depends on the DIMM.
Option 3 is a bit like option 2, except that you may be able to upgrade to 2 GB DIMM, if this isn't what you have now. New and second-hand DIMM is options in question.
Your 745 takes 1 GB and 2 GB DDR2 DIMMS. Those who are fairly cheap these days if you buy used them. According to my experience, RAM used on eBay/Amazon is just as good as new, but YMMV. Some people are just better feel on the purchase of new parts and get a 1 year/90 days / whatever is guaranteed. Choose wisely, grasshopper.
Tags: Dell Desktop
Similar Questions
-
Drivers for Dell OEM 7570 on Optiplex 745
So, I caught on the Bay, a video card OEM Dell 7570, which was a work of a XPS 8500 sweater, and I'll like to stick it in an optiplex 745 as an upgrade of a radeon 4650. Tried to install it and not go. I only get the basic windows vga (800 x 600 with 32-bit color) adapter function, when I want a 1080 p configuration (my optiplex 745 now works as a htpc), but at least I know that the card is not fried.
I also tried to install catalyst 13.1, but it does not work (I had uninstalled the prior installation of catalyst with the old drivers of HD 4000 series and also followed that upward with a wipe the previous drivers with driver sweeper befor trying variations of the catalyst)
Apparently this particular cards OEM cannot use the ordinary AMD drivers; and cannot use the drivers from Dell. I even tried to use the 8500 XPS drivers who were for this card (once again, with an uninstall of previous catalysts and a wipe of driver before you install the drivers for the 8500 XPS for dell OEM 7570), but that didn't work. I suspect that it is because my optiplex 745 OS is Windows Vista Business 32 bit and to Win 8 64 bit dell OEM drivers.
Any suggestions on how to proceed? Is there a Vista 32-bit driver for Dell OEM radeon graphic card 7570? Should I try to install 8 64-bit Windows and then try the OEM drivers? Or tried the drop in this map, a race of fools?
Reflections and suggestions would be appreciated.
Real speed bump just 7750.
www.newegg.com/.../Product.aspx
Base clock 800 MHz
Stream stream processors 512 processors
Memory memory clock 1125 MHz (4.5Gbps)
Size of the memory 1 GB
128-bit memory interface
Type GDDR5 memory
The 3D DirectX 11, OpenGL 4.2 API
Radeon HD 4650
Processors Stream 320 stream processors
Memory 1 GB
128-bit memory interface
Memory type DDR2
The API 3D DirectX 10.1, OpenGL 3.0
-
Upgrade CPU OptiPlex 745? Advise please
Hi, I have just an Optiplex 745 with the Mobo bent, 0 599 MM outside of maxing out the ram that I would be able to upgrade the processor, currently Intel Duo 2 6400, after having scanned google I am more confused that when I started, it currently has an equipped 280wpsu please bear this in mind when thingking on what processor to fit. Of course, eBay is the cheapest source for forests for these today and I have a limited budget of tooboot! Thanks for any advice you can give.
Andrew
AJBRISTOLHi, I have just an Optiplex 745 with the Mobo bent, 0 599 MM outside of maxing out the ram that I would be able to upgrade the processor, currently Intel Duo 2 6400, after having scanned google I am more confused that when I started, it currently has an equipped 280wpsu please bear this in mind when thingking on what processor to fit. Of course, eBay is the cheapest source for forests for these today and I have a limited budget of tooboot! Thanks for any advice you can give.
Andrew
AJBRISTOLThe OptiPlex 745 supports the following processors:Processor Intel Core 2 Duo E6700 (2.66 GHz, front side bus at 1066 MHz, 4 MB Cache)
Processor Intel Core 2 Duo E6600 (2.40 GHz, front side bus at 1066 MHz, 4 MB Cache)
Intel Core 2 Duo processor E6420 (2.13 GHz, front side bus at 1066 MHz, 4 MB Cache)
Intel Core 2 Duo E6400 processor (2 MB Cache, 2.13 GHz, bus front-end to 1066 MHz)
Intel Core 2 Duo processor E6320 (1.86 GHz, front side bus at 1066 MHz, 4 MB Cache)
Intel Core 2 Duo processor E6300 (1.86 GHz, front side bus at 1066 MHz, 2 MB Cache)Processors Quad Core 2 are not supported by the OptiPlex 745.Before installing the processor, remember to update the BIOS to the latest version.
Bev. -
All, I am new to the forum but have been reading up on top of a problem that had led me into a wall.
I'm trying to create a development environment that uses VMWare Workstation 7.0.1 (and I tried with 7.0.0 before, leading me to)
update in the hope of a quick solution) as a development of imaging and the test bench. The system is a Dell Optiplex 745, upgraded to 8 GB of
RAM. Unfortunately, it seems that the biggest problem is the network card.
I tried several different operating systems, and all DHCP requests are found in the AUTOMATIC private IP addressing. This is even after I implemented a custom adapter (VMNet2) that fills explicitly to this network card problem. I disabled VMNet0 and all because this dish was not working. I have read some relevant
messages, but nothing seems to help. This included the http://communities.vmware.com/message/675649 and more
positions listed on the registry settings. I don't know what to do at this point.
So, for those who do not know the Broadcom driver issues, they are apparently many. It is important to disable the unloading, but
I'm not able to find the settings in the post linked above. It's quite similar to the OP for this thread. I'm not
know if it's a difference of conductor between the 32-bit and 64-bit implementations. So, I updated from the version of the driver
12.2.2.1 (b57nd60a.sys) of 10.100.0.0 (I think, can not driver rollback now to check because I need to work on VMS for urgent
projects as soon as POSSIBLE). So, as I said, I was unable to find the parameters of this post
()http://communities.vmware.com/thread/191085) mentioned below:
Large Send Offload (IPv4)
Large Send Offload v2 (IPv4)
Large Send Offload v2 (IPv6)
What I found were these parameters:
Flow control (Auto, I tried to disable)
Priority and VLAN (priority & VLAN enabled; I tried priority and VLAN disabled)
Speed and Duplex (Knew better than to mess around here, has made the problems in the past, retired to Auto)
VLAN ID (always 0)
Wake Up Capabilities (Magic Packey; no one tried)
Unloading ARP (Enable; I tried to disable)
NS unloading (Enable; I tried to disable)
I tried enabling / disabling all, specially those mentioning the unloading, all day without success. This did not help.
Later, I tried to add DontAddDefaultGateway, EnabledRSS and DisableTaskOffload keys to my CurrentControlSet on the
host. For some reason any DisableTaskOffload shows in the regedit, GUI, not the export of text. Don't know what this means, and I'm too
tired of care at this point.
Host registry settings:
Windows Registry Editor Version 5.00
"ICSDomain"="mshome.net."
"SyncDomainWithMembership" = DWORD: 00000001
"NV Hostname"="HOME".
"DataBasePath" = hex (2): 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f, 00, 6f,
00,74,00,25,00, 5 C, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 D, 00, 33, 00, 32, 00, 5 C, 00,------.
64,00,72,00,69,00,76,00,65,00,72,00,73,00 5 C 00, 65, 00, 74, 00, 63, 00, 00, 00
"NameServer"=""
"ForwardBroadcasts" = DWORD: 00000000
"Domain"="domain.mei.contoso.com."
'Hostname '=' HOME '.
"SearchList"=""
"UseDomainNameDevolution" = DWORD: 00000001
"DeadGWDetectDefault" = DWORD: 00000001
"DontAddDefaultGatewayDefault" = DWORD: 00000000
"EnableWsd" = DWORD: 00000001
"QualifyingDestinationThreshold" = dword:00000003
"NV Domain"="domain.mei.contoso.com"
"EnableRSS" = DWORD: 00000000
"DhcpNameServer"="141.161.200.201 141.161.100.201".
"DhcpDomain"="contoso.com".
So, I'm not where that leaves me. I am attaching a file vmx for a Windows XP (currently only started in WinPE) invited configured with bridged and IP information for the host and the guest. If anyone can help me, I would be incredibly grateful.
Guest VMX file:
. Encoding = "windows-1252".
config.version = '8 '.
virtualHW.version = "7".
maxvcpus = "4".
scsi0. Present = 'TRUE '.
memsize = '512 '.
ide0:0. Present = 'TRUE '.
ide0:0. FileName = 'Pharos PS.vmdk Test '.
IDE1:0. Present = 'TRUE '.
IDE1:0. FileName = "C:\Users\%username%\Documents\ISOs\peboot.iso".
IDE1:0. DeviceType = "cdrom-image".
floppy0.filetype = 'file '.
floppy0. FileName = "autoinst.flp".
floppy0.clientDevice = "FALSE".
ethernet0. Present = 'TRUE '.
ethernet0.wakeOnPcktRcv = "FALSE".
ethernet0. AddressType = 'generated '.
USB. Present = 'TRUE '.
EHCI. Present = 'TRUE '.
Sound.Present = 'TRUE '.
sound.startConnected = "FALSE".
sound.fileName = "-1".
Sound.AutoDetect = "TRUE".
MKS. Enable3D = 'TRUE '.
pciBridge0.present = 'TRUE '.
pciBridge4.present = 'TRUE '.
pciBridge4.virtualDev = "pcieRootPort"
pciBridge4.functions = '8 '.
pciBridge5.present = 'TRUE '.
pciBridge5.virtualDev = "pcieRootPort"
pciBridge5.functions = '8 '.
pciBridge6.present = 'TRUE '.
pciBridge6.virtualDev = "pcieRootPort"
pciBridge6.functions = '8 '.
pciBridge7.present = 'TRUE '.
pciBridge7.virtualDev = "pcieRootPort"
pciBridge7.functions = '8 '.
vmci0. Present = 'TRUE '.
roamingVM.exitBehavior = 'go '.
displayName = "Test Pharos PS"
guestOS = "winxppro.
NVRAM = "Test Pharos PS.nvram."
virtualHW.productCompatibility = "hosted".
easyInstall.keepFloppy = 'TRUE '.
extendedConfigFile = 'Test Pharos PS.vmxf'
ethernet0.generatedAddress = "00: 0C: 29:64:09:63.
tools.syncTime = "FALSE".
UUID. Location = "56 4 d c0 0 b b2 3 b 33 07-24 4 c 65 64 09 63 a4 b1.
UUID. BIOS = "56 4 d c0 0 b b2 3 b 33 07-24 4 c 65 64 09 63 a4 b1.
cleanShutdown = 'TRUE '.
Replay.Supported = 'TRUE '.
Replay.FileName = «»
ide0:0. Redo = «»
pciBridge0.pciSlotNumber = "17".
pciBridge4.pciSlotNumber = "21".
pciBridge5.pciSlotNumber = "22".
pciBridge6.pciSlotNumber = "23".
pciBridge7.pciSlotNumber = "24".
scsi0.pciSlotNumber = "16".
usb.pciSlotNumber = "32".
ethernet0.pciSlotNumber = "33".
sound.pciSlotNumber = "34".
ehci.pciSlotNumber = "35".
vmci0.pciSlotNumber = '36 '.
vmotion.checkpointFBSize = "134217728.
USB:0. Present = 'TRUE '.
USB:1.present = 'TRUE '.
ethernet0.generatedAddressOffset = '0 '.
vmci0.ID = "1701054819".
tools.remindInstall = 'TRUE '.
USB:1.DeviceType = "hub".
USB:0. DeviceType = "mouse".
ethernet0.VNET = "VMnet2.
ethernet0. ConnectionType = "custom".
debugStub.winOffsets.version = "7".
debugStub.winOffsets.value = "0 x 0, 88 x 84, 0 18 0 x 190 x, 0 x 174, 16, 416, 0x22c, 0 x 228, 0x1f0, 0 x 224, 0x20, 0x18, 0x18, 0x20, 0 x 24, 0x11c, 0 x 8, 0 0, 0, 4 x 0, 14 x 100000, 0xc, 0xc, 0x1b0, 0x18, 0x13c, 0x1f4.
Host adapters:
Windows IP configuration
Name of the host...: TOWMI
Suffix main Dns...: domain.mei.contoso.com
Node... type: hybrid
Active... IP routing: No.
Active... proxy WINS: No.
... DNS suffix search list: domain.mei.contoso.com
Contoso.com
Mei.contoso.com
Ethernet connection to the Local network card:
The connection-specific DNS suffix. : contoso.com
... Description: Broadcom NetXtreme 57xx Gigabit Controller
Physical address.... : 00-19-B9-38-5A-03
DHCP active...: Yes
Autoconfiguration enabled...: Yes
Address IPv6 local link...: fe80::25cc:6bfc:91 has 9: d64d % 11 (Preferred)
IPv4 address...: 10.205.3.136 (Preferred)
... Subnet mask: 255.255.254.0.
Lease obtained...: Monday, 1 March 2010 16:00:06
End of the lease...: Tuesday, March 2, 2010 16:00:05
... Default gateway. : 10.205.2.1.
DHCP server...: 141.161.200.213
DHCPv6 IOOKING...: 234887609
DHCPv6 DUID customer...: 00-01-00-01-13-19-D6-D2-00-19-B9-38-5A-03
DNS servers...: 141.161.200.201
141.161.100.201
NetBIOS over TCP/IP...: enabled
Ethernet VMware Network adapter adapt VMnet1:
The connection-specific DNS suffix. :
... Description: VMware Virtual Ethernet adapt for VMnet1
Physical address.... : 00-50-56-C0-00-01
DHCP active...: No.
Autoconfiguration enabled...: Yes
Address IPv6 local link...: fe80::ace9:b312:d32d:fb39% 16 (Preferred)
IPv4 address...: 192.168.58.1 (Preferred)
... Subnet mask: 255.255.255.0.
... Default gateway. :
DHCPv6 IOOKING...: 352342102
DHCPv6 DUID customer...: 00-01-00-01-13-19-D6-D2-00-19-B9-38-5A-03
DNS servers: fec0:0:0:ffff:1 1%
FEC0:0:0:FFFF:2 1%
FEC0:0:0:FFFF:3 1%
NetBIOS over TCP/IP...: enabled
Ethernet VMware Network adapter adapt VMnet8:
The connection-specific DNS suffix. :
... Description: VMware Virtual Ethernet adapt for VMnet8
Physical address.... : 00-50-56-C0-00-08
DHCP active...: No.
Autoconfiguration enabled...: Yes
Address IPv6 local link...: fe80::1c44:4e88:3178:4ccf % 17 (Preferred)
IPv4 address: 192.168.168.1 (Preferred)
... Subnet mask: 255.255.255.0.
... Default gateway. :
DHCPv6 IOOKING...: 369119318
DHCPv6 DUID customer...: 00-01-00-01-13-19-D6-D2-00-19-B9-38-5A-03
DNS servers: fec0:0:0:ffff:1 1%
FEC0:0:0:FFFF:2 1%
FEC0:0:0:FFFF:3 1%
NetBIOS over TCP/IP...: enabled
Tunnel adapter isatap. {4EF89CD9-7A7D-4B80-83C5-A56D5FA6D748}:
State of the media...: Media disconnected
The connection-specific DNS suffix. :
... Description: Microsoft ISATAP adapter
Physical address.... : 00-00-00-00-00-00-00-E0
DHCP active...: No.
Autoconfiguration enabled...: Yes
Card tunnel Local Area Connection * 9:
State of the media...: Media disconnected
The connection-specific DNS suffix. :
... Description: Teredo Tunneling Pseudo-Interface
Physical address.... : 00-00-00-00-00-00-00-E0
DHCP active...: No.
Autoconfiguration enabled...: Yes
Tunnel adapter isatap. {E03C7ECA-35DF-43C6-BCC8-08D2BB8E4233}:
State of the media...: Media disconnected
The connection-specific DNS suffix. :
... Description: Adapter Microsoft ISATAP #2
Physical address.... : 00-00-00-00-00-00-00-E0
DHCP active...: No.
Autoconfiguration enabled...: Yes
Tunnel adapter ISATAP.contoso.com:
State of the media...: Media disconnected
The connection-specific DNS suffix. : contoso.com
... Description: Adapter Microsoft ISATAP #3
Physical address.... : 00-00-00-00-00-00-00-E0
DHCP active...: No.
Autoconfiguration enabled...: Yes
Adapters of comments:
Windows IP configuration
The host... name: minint-et0ko7r
Primary Dns suffix...:
Node... type: hybrid
Active... IP routing: No.
Active... proxy WINS: No.
Ethernet connection to the Local network card:
The connection-specific DNS suffix. :
... Description: VMware accelerated AMD PCNet Adapter
Physical address.... : 00-0C-29-64-09-63
DHCP active...: Yes
Autoconfiguration enabled...: Yes
Address IPv6 local link...: fe80::8842:488e:b75:ec51 %2 (Preferred)
Autoconfiguration IPv4 address. . : 169.254.236.81 (Preferred)
... Subnet mask: 255.255.0.0.
... Default gateway. :
DHCPv6 IOOKING...: 33557545
DNS servers: fec0:0:0:ffff:1 1%
FEC0:0:0:FFFF:2 1%
FEC0:0:0:FFFF:3 1%
NetBIOS over TCP/IP...: enabled
See also my VNE screen capture and sample log file attached. Thank you very much in advance for any help.
Sorry, had to rub a small part of the newspaper for my own protection.
Post edited by: alharaka
I'm sorry, I completely forgot to reply to this topic yesterday (get distracted by a matter of work). I'll be back today and noticed that you have marked this as answer. The root cause of the problem was therefore one MAC address per port restriction put in place by your network management team?
-
Dell Optiplex 745 question?
I was asked by a customer to upgrade there Dell Optiplex 745 towers 2
Dual Core E4400 2.0 GHz
4 GB of ram
BIOS is 2.6.6 last I can find
Xp pro operating system course
I put in a dell disk 7 pro windows 64-bit and 32-bit in the DVD Rom and it does not start.
The DVD works I tested it.
What am I missing here how to start on a different disk, and install the new OS?
Level of speed, I put the CPU in my main post here model is the model of the DVD RW
HL-DT-ST DVD +-RE GSA - H31N
So, what else do you think is possible?
-
(Redirected) Tower Dell Optiplex 745 win 7 pro question?
I was asked by a customer to upgrade there Dell Optiplex 745 towers 2
Dual Core E4400 2.0 GHz
4 GB of ram
BIOS is 2.6.6 last I can find
Xp pro operating system course
I put in a dell disk 7 pro windows 64-bit and 32-bit in the DVD Rom and it does not start.
The DVD works I tested it.
What am I missing here how to start on a different disk, and install the new OS?
Best of this post in the Forum OS from Microsoft here:
http://en.community.Dell.com/support-forums/software-OS/f/3524.aspx
Bev.
-
OptiPlex 745 sometimes freezes on the start of start page
I recently put the hand on one occasion Optiplex 745 (CPU Intel of E6400 @2. 13 GHz, 2 GB RAM), which seems, to an almost complete lack of internal dust, were very little used.
It works perfectly except the problem that is described in the title of the thread. When he turned, 'sometimes' (maybe 2 out of every 3 attempts), the screen freezes on the start page to start Dell with the stop bar (between Optiplex 745 and BIOS 2.6.6) progress before the end of his race.
It seems if stop is at half way through (under the '7' in Optiplex 745) or after only 25% of his race.
It is interesting that he stops, apparently, exactly one or the other of these two points each time.
Immediately after, if I turn on the machine, then next turn, it will start perfectly about 95% of the time. Otherwise, I might have to stop/resume a third time so he can begin.
While Google has found countless instances of computers to freeze while displaying the boot splash, everything I've come across seem to have problems 'permanent '. In other words, the start is just not possible. In my case, however, I can start and the machine seems to work perfectly as the occasional glitch.
Can anyone shed light on what could happen here? And should I be worried?
Hi Ron
Thanks for your suggestions. Yes, I would have given more information in my first post. In fact, the form factor is LTS, the power button remains lit in green before, during and after the freeze, the diagnostic lights 1, 2 and 3 turned ("another failure has occurred") and no beeps sound. I don't know when the cmos battery has been replaced last as I have only had this machine a little over a week ago.
However, it seems that the problem is now solved, but note that I did say that I understood why it is resolved.
I did a lot of fiddling around trying to get this little machine works well. When I finally got in some OS (dual boot Win7 and Ubuntu) installed on the HARD drive, I had two sets of wireless keyboard/mouse hooked through dongles usb - not intentionally, but it's what happened.
That is when I started noticing the problem described in my first post.
As I need a keyboard and mouse to another computer, I removed the dongles (it had a single dongle for kbd and one for the mouse) and, subsequently, I have not had one instance of the problem freeze despite having started the machine at least 30 times since then.
A test, I plugged two dongles of kbd/mouse as before all leaving the single dongle for the other connected keyboard and mouse set. In this case, the start is frozen in two of the three attempts.
In order to have both sets keyboard and mouse attached seems to be the problem.
But why? I'm puzzled.
-
I didn't like the new firefox 40 was the problem. To make it worse in chrome videos have been hanging out at all, but when I restarted my computer it could not restart correctly. I've seen this kind of problems with the RAM sticks before so I said to give it a try.
The sticks were very hot and one of them showed signs of oxidation.
I cleaned the with an eraser and now the computer works fine again.I have 4 GB ddr2 800 adata vitesta 4x1Go sticks.
Good job. Play well.
-
Is - this model 2013 13 "MacBook Pros support 16 GB RAM stick on one location?
Is - this model 2013 13 "MacBook Pros support 16 GB RAM stick on one location? Intend to keep the second empty slot.
Tell us the exact model of your laptop. Currently, it seems that the answer is 'no '.
-
Can Inplease cause a list of all the RAM sticks, that I can use it on the HP 14 - ro24TX Haswell Corei3
Hello
You have a lot of messages. Please use the following post:
Thank you.
-
I have 2 RAM sticks of 1 GB in my computer, only seems to indicate. __
- I just installed two, a GB of Ram sticks in my dell dimension 3000. However, I see only one... I tried to change the ram around and work each stand alone in both slots. How can I bypass the doctor
Try running Memtest86 +: it runs from a floppy disk or CD, you must remove or
confirm whether your one or more of your sticks of memory are bad or the values of the SPD in the BIOS are correct.
Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), if no errors at that time then your ram is OK.
http://www.memtest.org/
Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
http://www.overclockers.com/forums/showthread.php?t=409152Your BIOS shows 2 GB is the amount installed?
Never be afraid to ask. This forum has some of the best people in the world to help.
-
Where can I get a job for the audio adapter HDA device driver in my Dell Optiplex 745.
I had a virus and had to reinstall my Windows XP system. I installed all the security and updates customized to the last SP3 level, but I still can't get sound to work on my Dell Optiplex 745 computer. I downloaded the Windows Fix - It program and identified a problem with the audio device, it can't fix it. I need to know where I can get a working device driver for the HDA audio card in my system.
You go to Dells site and download the correct audio drivers. Young people and learning... Have mercy - Chaos if this post solves your problem, please click 'Mark as answer' or 'useful '. This helps other users having similar problems find the answer faster.
-
I have an optiplex 745 windows vista ultimate and it keeps freezing.
Original title: freezing problem
I have an optiplex 745 windows vista ultimate and it keeps freezing. Can someone please?
Hello
See if this helps you:
Search for malware, if necessary using the safe mode with networking.
http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
- Select the Safe Mode with networking with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
Once in Safe Mode with network, download and run RKill.
RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.
http://www.bleepingcomputer.com/download/rkill/
Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:
http://www.Malwarebytes.org/products/malwarebytes_free
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
You can clean your hard drive using these two methods.
"Delete files using Disk Cleanup"
http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup
Using the free CCleaner program:
http://www.Piriform.com/CCleaner
In NO case use the registry cleaning Option in CCleaner
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
Update drivers:
Access the site on your computer or equipment manufacturing > Driver and Software Support Section > search your computer or hardware model number > then your operating system > locate the correct drivers > download and install.
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
"Optimize Windows for better performance.
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
It would be a good idea to run the System File Checker tool if you have corrupted files
"How to use the System File Checker tool to fix the files on system missing or corrupted on Windows Vista or Windows 7"
http://support.Microsoft.com/kb/929833
Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:
- Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
- Type the following command and press ENTER:sfc/scannow
The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.
If SFC detects serious flaws, you may need to perform a repair upgrade Installation or relocation complete if you don't have a Vista DVD from Microsoft.
If you can borrow a DVD of Vista from Microsoft you save doing a reinstall full:
"How to perform a repair for Vista Installation"
http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html
See you soon.
-
Would I be able to use 2 4 GB ram sticks in my hp pavilion Center m8430f pc media?
Initially, I thought I was getting 4 2 GB ram sticks. Should I send back memory or the 4 GB sticks will be compatible with the motherboard because I'm not exceeding 8 GB total ram?
BTW... Windows 7 ultimate 64 bit
Thanks in advance
Beeker318 wrote:
According to the information available for your motherboard, no, that memory will not be compatible with your computer.
-
OptiPlex 745 Mini-Tower - GFX card options?
Hi all
I own an optiplex 745 Mini-Tower and I want to install a graphics card. I read the manual and it says that its PCI Express slot is 16 x but I could not find anywhere a response on whether it is compatible PCI-E 2.0 or 3.0. This makes the choice of a quite difficult graphics card. I read somewhere that if I install a 3.0 card gfx, it would be "backward compatible" feel, he would work on a 2.0 interface (isn't that backward compatibility option depends on the entirely gfx card?) Some cards him and others not so I'm not mistaken).
So, this is the case with this model, or it is indeed a 3.0 interface?
Could I install a 3.0 card gfx or 2.0?
Thank you.
jdj9
PCI-E 1.0 or 2.0 are very good. PCI-E 2.1 or 3.0 may or may not be backward compatible. Some R4 R5 R9 of R7 of Sapphire cards do seem to work in older systems like the precision, etc. 490. I used an ASUS GDDR5 PCI-E 3.0 GT740 and it worked fine in my 745.
The problem is that the profile for the 16 x power plug changes with version 2.1 and 3.0. In addition, Sapphire will show they don't support UEFI BIOS systems with their R series cards.
It is also why the older variety of version 1.0 or 2.0 cards often are not seen at all on the bus 3.0 on new computers.
The Asus EAH6450 works very well in all models of Dell, in that I have tried.
Not compatible with USFF or Micro because they have no slots.
The only new parameter is the secure boot must be extinguished and CSM on for some cards to post.
ASUS EAH 6450 SILENT card fits all models of Dell who have a Slot PCI - E, meaning that it does not work with USFF due to no expansion slot. The 6450 a 2 X the number of shaders as the 5450 doesn't.
cs_setInnerHtml ('video_3f98d004-6424-4472-b955-c5b98d6fe85f', ");
(Cooler) higher performance can be had from ASUS GT740
GT740-2GD3-CSM 2 GB
http://www.Newegg.com/product/product.aspx?item=N82E16814121877
http://www.Newegg.com/product/product.aspx?item=N82E16814121439
Maybe you are looking for
-
Satellite A200 - 25 c - looking for examinations and tests
Hi, I would buy the A200 - 25 c: T8100 - HD2600 - 2 GB - 320 GB (800-1000a ¢ A?) A¬) But it is very difficult to find any tests or comments on this particular model. I'm looking for mostly pictures on this topic, given the autonomy,energy consumption
-
WRE54G canmot associated not with this access point in Repeater mode.
Hello Because of the concrete walls, I have a weak signal to use the WRE54G to extend my existing wireless network. However, I installed an Ethernet cable and found possible to connect the WRE54G access point. This is my extension of network is via a
-
What ePrinter pays Disney printing applications?
I'm looking for the good ePrinter buy (currently I'm not using any printer HP), I like the Disney print apps, what printer supports printing applications Disney?
-
I just installed 12.1.0.1.0 Standard Edition One on Windows 8 PRO. Using the installer, I created a single instance in shared mode.Whenever I connect via sqlplus sys in the CBD the connection is instant: sqlplus sys / as sysdbaWhenever I connect vi
-
Hi gurus,Version of Oracle 10 g release 2.My requirement is to know how to display the sequential months if I pass an argument to the select statement?If I go 5 then it gives the output asJUL-2014AUG-2014SEP-2014OCT-2014NOV-2014Thank youSID.