ORA-00210: could not open the specified control file

Similar Questions

• ORA-28575: could not open the RPC connection to external procedure

  Hello

  I get the following error:

  ORA-28575: could not open the RPC connection to external procedure

  ORA-06512: at "SDE". ST_GEOMETRY_SHAPELIB_PKG', line 1325

  ORA-06512: at "SDE". ST_GEOM_UTIL', line823

  my environment:

  ORACLE 11 g 2 (11.2.0.3)

  IBM AIX 6.1

  ESRI software: ArcSDE 10.1 SP1

  Since I'm on oracle 11g release 2, I used the method of the external procedure:

  under $ORACLE_HOME/hs/admin

  in the "extproc.ora" file, I added the line

  SET EXTPROC_DLL = ANY

  and still the same problem.

  so I made the (listener and tnsnames configuration method) where that might solve the problem. However, it does not help...

  I also applied the oracle metalink 1256784.1 ID DOC

  but without success and I'm still getting this error (ORA-28575).

  After extensive troubleshooting, I discovered that this will happen in one of two situations:

  1. the external procedure library .so is corrupted.

  OR

  2. the external procedure library .so is a 32-bit... .to check that the Unix ( file lib.so), the exit command should give you 64-bit

• ORA-28575: could not open the RPC connection to the external procedure agent

  Hello world
  
  Could you please help me with this problem? I am trying to configure Oracle XE 11 g for external procedures, this because I need to access certain procedures in a DLL in Delphi 6.0, but even with the simplest of the dll that I do, as a sum in C, I can't pass this ORA-28575 error: could not open the RPC connection to the external procedure agent.
  
  It's my listener.ora:
  
  SID_LIST_LISTENER =
  (SID_LIST =
  (SID_DESC =
  (SID_NAME = PLSExtProc)
  (ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
  (= Extproc PROGRAM)
  )
  (SID_DESC =
  (SID_NAME = CLRExtProc)
  (ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
  (= Extproc PROGRAM)
  )
  )
  
  LISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC0))
  (ADDRESS = (PROTOCOL = TCP)(HOST = myPC) (PORT = 1521))
  )
  )
  
  
  DEFAULT_SERVICE_LISTENER = (XE)
  
  and that's my tnsnames.ora:
  XE =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = myPC) (PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = XE)
  )
  )
  
  EXTPROC_CONNECTION_DATA =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC0))
  (CONNECT_DATA =
  (SID = PLSExtProc)
  (PRESENTATION = RO)
  )
  )
  
  ORACLR_CONNECTION_DATA =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1))
  )
  (CONNECT_DATA =
  (SID = CLRExtProc)
  (PRESENTATION = RO)
  )
  )
  
  Do you know what could be the problem? I'm out of ideas and google search...
  
  Also, is there a difference in a call to a DLL in VB and one made in Delphi?
  
  Thank you and best regards,

  See the MOS NOTES:
  ORA-28575: cannot open connection to RPC if "ORA_EXTPROC_THREADED" is set in the registry [945396.1 ID]
  External procedures - troubleshooting errors ORA-28575 [70638.1 ID]

• Error "could not open the access control editor, access is denied" while accessing the C: drive

  Hello

  I use Home Basic to Windows 7, I saw two drive C: / and R. /. by mistake I changed security optional properties of the discs now I can

  to access only a: .my c: drive / drive does not open when I open drive c properties, then on security and it continue display "cannot open the access control editor, access is denied.any another application do not open I can not even able to restore it, please help step by step"

  thanx

  Original title: in the c drive security permissions

  Hi Ravindra,

  Thanks for posting your question on the Forum of the Microsoft community.

  Permissions are rules associated with objects on a computer or network, such as files and folders. Permissions determine whether you can access an object and what you can do with him. For example, you might have access to a document in a shared folder on a network. Also, refer to:

  What to know before applying permissions to a file or folder

  According to your error message. I would like you try these steps and check if the problem persists.

  Steps for the reader:
   
  a. click on the drive, click Propertiesand then click the Security tab.
  b. click Advancedand then click the owner tab.
  c. click change, and then do one of the following:
  (d) to change the owner to a user or group that is not listed, click other users and groups and enter the object name to select (examples), type the name of the user or group and then click OK.
  e. to change the owner to a user or a group is listed in the change of ownership of the area, click the new owner.
  f. If you want to take ownership of the contents of the disc, select the Replace owner of subcontainers and objects of the box.
  g. click OKand then click Yes when you receive the following message appears: you are not allowed to read the contents of directory folder name. Do you want to replace the the directory permissions with permissions granting you full control?
  h. all permissions will be replaced if you click Yes.
  i. click OK.

  Check if the problem persists.

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• TrueSuite Fingerprint error "error: could not open the specified database.

  Hello

  I bought new Toshiba Satellite P300-PSPCCA two weeks back and fingerprints worked very well. Suddnlly stoped working. I was getting connection to fingerprint for the unavailable error message when I start my laptop. I try uninstalling and reintalling software Truesuite and dirvers but no luck. I downloaded the latest version of the software from toshiba Web site but still no luck.
  I was looking for a solution and I have read on several forums that must back the driver, if who does not then the only solution would be the factory default setting.

  I try to roll back the drivers, but still, it does not solve the problem. Finally, I put my laptop to factory default and still having the same error message...
  I also tried to delete all fingerprints via the Truesuite software but I get "error: failed to remove fingerprints...

  It has no option in the bios to wipe the fingerprints of memory... because I saw in IBM there is option in the bios to remove the fingerprint via bios... but not at toshiba...

  I really need help with my problem... Please... someone help me...

  Kind regards
  Jay

  Hello

  These questions are not easy to solve. Many people have noticed problems with this software and everything what you have done is OK, but one thing is strange to me.
  After the new installation of the operating system using the Toshiba recovery image everything should work perfectly. After doing this you have the same situation as after the purchase and start. Then I don't understand how you can have this problem again. The fact is that the stored data will be removed by cleaning the drive HARD or OS recovery to factory default state.

  On this forum, you will find many similar topics. Please put impossible to open the database specified as search terms in the advanced search option and check the listed topics. You may find the final answer.

  Good luck!

• ORA-31640: could not open the dump file ' / restoration/psdwh/exp_dataONLY_iccs_25062.

  Hello
  Version 11203
  
  I try to import the schema in exadata machine using impdp.
  The impdp can't open the dump file.
  
  Departure "ICCS. "" SYS_IMPORT_FULL_01 ": userid = ICCS / * full = TABLE_EXISTS_ACTION = APPEND
  DIRECTORY = PARALLEL EXP_FOR_EXADATA = 4 DUMPFILE=exp_dataONLY_iccs_25062012_%U.dmp LOGFILE = exp_dataONLY_iccs_25062012.log
  

  Processing object type SCHEMA_EXPORT/TABLE/TABLE_DATA
  ORA-31693: Table data object "ICCS"."INF_CALL_ERR" failed to load/unload and is being skipped due to error:
  ORA-31640: unable to open dump file "/restore/psdwh/exp_dataONLY_iccs_25062012_04.dmp" for read
  ORA-19505: failed to identify file "/restore/psdwh/exp_dataONLY_iccs_25062012_04.dmp"
  ORA-27037: unable to obtain file status
  Linux-x86_64 Error: 2: No such file or directory
  Additional information: 3
  .....
  ORA-31693: Table data object "ICCS"."CC_AGG3" failed to load/unload and is being skipped due to error:
  ORA-31640: unable to open dump file "/restore/psdwh/exp_dataONLY_iccs_25062012_02.dmp" for read
  ORA-19505: failed to identify file "/restore/psdwh/exp_dataONLY_iccs_25062012_02.dmp"
  ORA-27037: unable to obtain file status
  Linux-x86_64 Error: 2: No such file or directory
  Additional information: 3
  . . imported "ICCS"."CUST_S"                         19.78 MB  580379 rows
  . . imported "ICCS"."CUST_SUM_CD"                    16.79 MB  843460 rows
  ORA-31693: Table data object "ICCS"."BILL_CUST_SALE_TMP_C" failed to load/unload and is being skipped due to error:
  ORA-31640: unable to open dump file "/restore/psdwh/exp_dataONLY_iccs_25062012_02.dmp" for read
  ORA-19505: failed to identify file "/restore/psdwh/exp_dataONLY_iccs_25062012_02.dmp"
  .....

  I checked the file is exist in the file system:
  

  [oracle@dm01db01 psdwh]$ ls -l /restore/psdwh/exp_dataONLY_iccs_25062012_04.dmp
  -rwxrwxrwx 1 oracle oinstall 701464576 Jun 25 10:36 /restore/psdwh/exp_dataONLY_iccs_25062012_04.dmp

  I checked that the file has the same authority as user oracle:

  dm01db01{oracle} /home/oracle >id
  uid=1000(oracle) gid=1001(oinstall) groups=101(fuse),1001(oinstall),1002(dba)

  I also checked that I have a right permission on the directory above:

  cd /restore
  ls -l
  drwxrwxrwx  3 oracle oinstall         9216 Jun 27 19:15 psdwh

  I have veified directory exists:
  

  SQL> select * from dba_directories;
  
  OWNER      DIRECTORY_NAME   DIRECTORY_PATH
  ----------------------------------------------
  SYS       EXP_FOR_EXADATA   /restore/psdwh

  I read, write on directory permission to the PUBLIC, and as you can see there are a few tables that managed to import:
  

  . . imported "ICCS"."CUST_S"                         19.78 MB  580379 rows
  . . imported "ICCS"."CUST_SUM_CD"                    16.79 MB  843460 rows

  Please note I'm getting this error everytime I use expdp with PARALLEL and with %U in the name of dumpfile.
  for example:

  expdp userid=iccs/iccs@psdwh  content=data_only EXCLUDE=statistics DIRECTORY=EXP_FOR_EXADATA 
  PARALLEL=4 DUMPFILE=exp_dataONLY_iccs_25062012_%U.dmp LOGFILE=exp_dataONLY_iccs_25062012.log

  If I export without PARALLEL and %U, average with just a dump file, I have no problem at all to import the file.
  
  Any advice?
  
  Thank you

  The problem is probably due to the directory is not not accessible from all nodes in the cars. If it works with parallel = 1 but not at the same time > 1 then the other nodes which are used to import data and given that the file exist, then please check that the disk is accessible from all nodes in the basket.

  Dean

• Could not open the handle (80) file ExceptionInfo

  I try to load Captivate using the creative Package Installer of cloud (https://www.adobe.com/go/ccp_installer_win). I have the license information, but the product is not install as I get the following error conditions.

  / 5/2016 11:55:22 [INFO] AdobePackageBuilder - verbosity Logging Level Set of 4

  05/04/2016 11:55:30 [WARN] AdobePackageBuilder - cannot open the file handle ExceptionInfo (80)

  05/04/2016 11:55:30 [WARN] AdobePackageBuilder - impossible to correctly create the exception information file

  Any help would be appreciated.

  Did you follow the steps in this document:

  Products non - Adobe Creative Cloud package

• Could not open the template .indd file

  Hello

  I have a javascript code which I'm porting from CS3 to CS5.

  The code worked well on a Windows as CS3 Server.

  I've worn it will work perfectly on my local machine to Mac on CS5.

  As soon as I try to run it on a Mac CS5 server, I get questions.

  Here is the original code snippet.

  ("model = File("/myDirectory/sample_template.indd ");
  

  document = app.open (model, true);

  The file exists and template.exists is combing back as 'true '.

  Return errors logging is:

  Error: Invalid value for parameter "openOption' method 'open '. Enumerator for the OpenOptions awaited, but received TRUE, is not a valid value for the parameter "openOption' of the 'open' method. Enumerator OpenOptions expected, but TRUE receipt.

  I tried the following variations of code with the following results in red.

  document = app.open (template);
  Error: Invalid value for parameter "openOption' method 'open '. Enumerator for the OpenOptions awaited, but received TRUE, is not a valid value for the parameter "openOption' of the 'open' method. Enumerator OpenOptions expected, but TRUE receipt.

  document = app.open (model, OpenOptions.OPEN_ORIGINAL);
  Error: defaultValue is undefined, defaultValue is undefined
  
  document = app.open (model, OpenOptions.openOriginal);
  Error: defaultValue is undefined, defaultValue is undefined

  document = app.open (model, OpenOptions.openCopy);
  Error: defaultValue is undefined, defaultValue is undefined

  
  I use this as my CS5 (app.scriptPreferences.version = 7;)

  Any ideas why app.open () is a failure?

  Carlos

  App.open () arguments are different in InDesign server. See: http://jongware.mit.edu/idcs5serv_html_3.0.3d/idservcs5/pc_Application.html#open.

  Not surprisingly, the showingWindow option is omitted, because InDesign Server windows never shows.

• Could not open the zone alarm file:Validation failed for c\windows\system32\zpeng25.dll.

  All of a sudden I can't activate my zone alarm service, because I gives me a message that the Validation failed for c\windows\system32\zpeng25.dll.  After you receive this message, I ran software to fix registry errors, but that has not fixed the problem.  I am able to follow the explicit instructions so careful instructions are given.  Thank you for your help.

  Do Zone Alarm support say when contact you? What responses did you get when you posted in their forums?
  http://forums.ZoneAlarm.com/index.php

• Portege R600 of fingerprint problem: error: could not open the specified database

  Hello

  I am trying to give the registration of fingerprints for my Toshiba Portege R600-101 and I get the above error.
  I tried also on windows XP and Vista.

  Has anyone with the same problem or anyone suggesting a solution?

  I uninstalled the truesuite Access Manager but still the same problem.

  See you soon.

  Hello

  I noticed a new update for software fingerprinting for protected R600.
  Remove the old application of fingerprints, restart the laptop, clean the registry and the system using a 3rd party too (CCLeaner is free and not bad).
  Then reboot again.

  Download the fingerprint on the page of the European driver Toshiba Software and install again.

  Check it out!

• Could not open the page "Get Started"

  After I instaled the oracle 11g XE on windows XP I open "Get Started". I get this: "Firefox cannot connect to this server 127.0.0.1:8080."
  I write about several sql: "' conn / as sysdba" and I get 'connected to an idle instance'. "
  Then to 'cancel the stop' = > 'instance shut down. "
  Then for "startup" = >
  ORA-1078, ORA - 01565:eror in the identification of the file "C:\oraclexe\app\oracle\product\11.2.0\server\dbs/spfileXE.ora".
  ORA-27041: could not open the file
  04002 - OSD: could not open the file
  
  Published by: 937555 on 02.06.2013 20:47

  Hello

  seems that something went wrong during installation when your spfile does not exist or is not readable or corrupted somehow.
  You should check your Setup for error logs, starting with cloneDBCreation.log in C:\oraclexe\app\oracle\product\11.2.0\server\config\log on your machine. This is where the creation of the spfile might be connected.

  -Udo

• Could not open the virtual machine

  I used the customer convertor to create this virtual machine from one which works well on ESxi.  When I try to open on Win7-64 machines running vmplayer 3.1.4 I get the following error:

  Could not open the virtual machine: file "D:\Data\VM Machines\WW S2008_32\WW S2008_32.vmx 10_1 10_1" line 1: syntax error.

  Any ideas?

  "" "WW 10_1 S2008_32.vmx.zip" attached file contains the "WW 10_1 S2008_32.vmx" file created under VMware Player 3.1.4 and was then modified to reflect the values of parameter that you might want to stay the same as uuid etc.  Start VMware Player and then check the settings before running the virtual machine.

• ORA-12154 tns could not resolve the specified correct identifier

  I am facing the following problem:

  labVIEW 2012 32 bits 64 bits of Windows 7, 10.2.0.1.0 oracle client (32-bit).

  I created a DSN from Data Sources (ODBC) (32-bit version of what in % windir%\syswow64\odbcad32.exe) pointing to an instance of Oracle 10 g.

  I have test the DSN in this way (IE. Data sources (ODBC) and the connection is successful (which means that the tnsnames.ora is correct).

  I use the "DB tools Open Connection.vi" in order to get connected to this database, passing as parameters the DSN above, the user name and password.

  I get the error:

  ADO error: 0x80040E4D
  Exception occurred in the Microsoft OLE DB provider for ODBC drivers:

  [Oracle] [ODBC] [Ora] ORA-12154: TNS could not resolve the specified correct identifier

  all will help much appreciated

  Thanks in advance

  Hello everyone.

  I already solved the problem (work until late Saturday).

  the solution was to install the latest version of the Oracle customer, namely: Oracle 11 g Release 2 CLIENT for Windows 32 (11.2.0.1.0).

  Now everything works OK.

  I also tested in Windows 7 32 bit (the .vi even and the same Oracle client). This will also OK.

  Thans a lot.

• ORA-17503: ksfdopn:2 could not open the file +M0347_DG1/m0347/spfilem0347.ora ORA-15001

  ASM, database version: 11.2.0.3

  Get error in the two alert logfile of ASM in cluster with two nodes below.

  ============

  Errors in the /u02/diag/asm/+asm/+ASM1/trace/+ASM1_ora_86521.trc file:

  ORA-17503: ksfdopn:2 could not open the file +M0347_DG1/m0347/spfilem0347.ora

  ORA-15001: diskgroup 'M0347_DG1' does not exist or is not mounted

  Same thing is written to the trace file as well.

  There is that a single database that p0347 runs and diskgroup that m0347_dg1 has been for other databases M0347 which is interrupted both diskgroup m0347_dg1 was abandoned.

  But why is it looking for spfilem0347.ora, please let me know how to fix.

  ORA-17503: ksfdopn:2 could not open the file +M0347_DG1/m0347/spfilem0347.ora

  P0347 database has nothing to do with the question. right?

  Probally you have not deleted from database M0347 of OCR and CRS was trying to start the database.

  $ORACLE_HOME of database using

  $ srvctl config database-d M0347

  If it is saved in OCR you should remove it.

  This command will delete the database.

  $ srvctl remove the d M0347 database

  Make sure Diskgroup is registered.

  With the help of GI $ORACLE_HOME

  $ srvctl config diskgroup g M0347

  If registered in OCR you can remove it.

  $ srvctl remove diskgroup g M0347

• Could not open the photos sent to my Hot mail account?

  Could not open the photos sent to my Hot mail account?

  Hi Dean,

   

  Hi Dean,

  1. what happens when you try to open the attachments?

  2 are you facing this problem with any particular email?

  3 are you facing this problem all other sites?

  4. what anti-virus software is installed on your computer?

  I suggest you to follow the steps and check if it helps.

  Method 1: Check if the security level is set to medium in Internet Explorer 9.

  Change Internet Explorer security settings

  Method 2: Optimize your internet Explorer and check to see if it helps.

  How to optimize Internet Explorer

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  Note: This link applies to Internet Explorer 9.

  If you encounter this problem only with Windows Live Hotmail, please visit the link below to find a community that will provide the best support.

  http://windowslivehelp.com/product.aspx?ProductID=1