ORA-01017 logging in OEM as sysdba but not as usual
I have a 10,2.0.4 database of area B which was created from a cold backup of a database on the box has (Solaris 10). The agent is 11.1.0.1 as the database on area C (Linux) with the OEM repository.
I created a (fs) user that has sysdba privileges in the 10.2.0.4 database on box A. Since the creation of a cold backup of database box A box B database, the user exists with the same privileges and password.
OEM, when I connect to the database on the box, I can connect with fs user, password and then in the drop-down menu, select sysdba and I connect. When I try to log in using the OEM for the database on the zone B, I enter the user as fs, give the password, click the menu drop down and assign sysdba and the connection fails and ORA-01017. I tried to retype the password and it has not yet. I've logged in area B, connected with fs as sysdba in sqlplus and had no problems. I went back to the OEM and tried again with the error 1017.
Here's the weird thing: if I try to connect as fs in OEM to database of area B, but leave it as 'normal', the connection works fine. It only fails when I try to open a session using fs as sysdba and who fails only OEM.
Someone at - he already seen this before?
Hello
have you copied the orapwd file?
Check on the box A and box B select * from V$ PWFILE_USERS;
Are the results the same?
Best regards
Kuba
Tags: Enterprise Manager
Similar Questions
-
Logs archiving shipped and registered, but not applied in physical standby
Our principal is node 3 RAC 11.2.0.1 on Redhat 5.2. Even for physical intelligence except that there is an instance. Applying recovery found the order Dec. 15. I checked and see that all archivedlogs are transported to the waiting and they are up-to-date in comapare the result of the query v$ archive_log primary and standby and comparing the physical files. I then tried to save the journal archived pending. I started the archivelog unapplied ealiese
Check the standby file alert_log and see that the primary connection was broken at the point where redo apply stop:SQL> ALTER DATABASE REGISTER OGFILE '/u01/flash/flashback_recovery_area/CCHDR/archivelog/2010_12_15/o1_mf_2_10620_6jlk3g25_.arc'; ALTER DATABASE REGISTER LOGFILE '/u01/flash/flashback_recovery_area/CCHDR/archivelog/2010_12_15/o1_mf_2_10620_6jlk3g25_.arc' * ERROR at line 1: ORA-16089: archive log has already been registered
While primary alert_log indicates that at the time where the database has been reset. Afyer the primaries started, Data Guard Broker has been initialized..... Recovery of Online Redo Log: Thread 2 Group 10 Seq 10615 Reading mem 0 Mem# 0: +REDO/cchdr/onlinelog/group_10.303.736441613 Wed Dec 15 16:33:14 2010 RFS[22]: Possible network disconnect with primary database ....
Now how can I leave again apply service continue?.... ALTER DATABASE OPEN Data Guard Broker initializing... Data Guard Broker initialization complete Data Guard: verifying database primary role... Starting Data Guard Broker (DMON) Wed Dec 15 16:46:15 2010 This instance was first to open Block change tracking file is current. Beginning crash recovery of 2 threads parallel recovery started with 3 processes ....
Audit of...
«We watch, entry here strictly only by sequnece #.»
Expected result. It's just to get a game from the primary.
The main is followed by two series."You find clues here?
Others that you have removed any doubt thereon being not applied no..
And I really sorry, I want to provide something more.
'' Waiting, sone entries are with dest_id = 2, they are really initially generated from standby ''?
Big question. I do not know. Checked: oracle note 241374.1 for details on dest_id without success.
I think it's that dest_id indicates whether the destination is local or remote. If, if it is true that the answer is no.
This makes sense since the database is read_only mode, why it would generate archive here?
If you still have all the archive back to 12-15 then there is still hope.
However, 12-15 is a long time ago. I consider at least rebuild the day before.
241374.1 is worth a visit because it can provide additional information for the future.
Published by: mseberg on January 5, 2011 15:01
-
How can I activate the Ctrl alt del button work to log in to the screen, but not to ask him
My old computer on the login screen it showed users or you could press CTRL alt delete and set username and password, how I set up like that and not have it is necessary to to do,.
Hello
Try the solution from the link below,
How to enable or disable the CTRL + ALT + DELETE sequence for logging on Windows XP and Windows Vista, Windows 7
http://support.Microsoft.com/kb/308226
If the fix the does not help, try the steps manually.
-
Now the pc will not boot (only a few beeps). It is not to sign up? If so, what can be done to correct?
Hi MikeinBoulder,
Do you get this noise when you turn on your pc? Seems to be a hardware problem... Check the ram on the pc module (if you have 2 ram module you can try to Exchange or start a ram module)...
I hope this helps.
-
OEM 12.1.0.3 Setup fails with ora-01017
Greetings,
I'm trying to upgrade my OEM 12.1.0.1 installation at 12.1.0.3. I'm following the instructions in the Oracle Enterprise Manager Cloud control Upgrade Guide and Support Oracle Note 1568143.1. I checked that all the prerequisites are met and have installed patch 11061801 in the repository. The repository and WHO are on different computers. The 12.1.0.1 installation is able to connect to the repository, it worked successfully for some time now. On the SGD server, quit the SGC and Agent and I invoke the 12.1.0.3 installation program. I followed the steps and when it gets to the login page, it fails with ORA-01017. Messages are displayed -
1. check if the SYS password you have entered is valid.
2. check if the REMOTE_LOGIN_PASSWORDFILE database initialization parameter is set to either shared or Exclusive.
3. check whether a file with the file name orapw < SID > password exists in the < ORACLE_HOME > / dbs directory.
All the conditions are met:
-bash-3, $ 2 echo $ORACLE_SID
oemrepos
SQL > connect sys as sysdba
Enter the password:
Connected.
SQL > connect sysman
Enter the password:
Connected.
SQL > show parameter remote_login_passwordfile
VALUE OF TYPE NAME
------------------------------------ ----------- ------------------------------
Remote_login_passwordfile string EXCLUSIVE
-bash-3, $ 2 ls-l $ORACLE_HOME/dbs/orapwoemrepos
-rw - r - 1 oracle dba 1536 January 30, 2013 /usr/local/oracle/app/oracle/product/11.2.0/dbhome_1/dbs/orapwoemrepos
I am able to connect remotely from another machine. sqlplus is not installed on the SGD server.
I am completely confused and need help. Web search indicates only that I need to make sure that the conditions listed above must be met, they are. If anyone has any suggestions I would appreciate the help.
Thank you.
Bill Wagman
The problem has been resolved by recreating the password file. I used the same password. I don't understand yet why however.
Thank you
Bill Wagman
-
Hello
I have been using OEM for the monitoring of the database. Recently, I've seen more error on screen
java.lang.Exception: ORA-01017: name of user and password invalid. connection refused - wait_bottlenecks
So I reset password with the same value to reopen. I still get this error.
When I try to sign in with the same password in sqlplus, I get same error also.
SQL > alter user DBSNMP identified by the values '-';
Modified user.
SQL > connect DBSNMP.
ERROR:
ORA-01017: name of user and password invalid. connection refused
I don't know why I'm not able to login with the same password I used to change the statement.
Thanks for the help in advance.
Let's not your syntax.
When you say 'identified by values' you tell Oracle 'this is not the password, but it is a salted and hashed password.
Do not use 'values '.
Technically,-is not a password valid, so I'll use it valid to demonstrate:
In 12.1.0.2, it will not allow you to use '-' because this isn't a valid hash value, so I can't prove that it works, but you get the idea
SQL> grant create session to foo; Grant succeeded. SQL> conn foo/aaa$ Connected. SQL> conn / as sysdba Connected. SQL> drop user foo cascade; User dropped. SQL> create user foo identified by values 'aaa$'; create user foo identified by values 'aaa$' * ERROR at line 1: ORA-02153: invalid VALUES password string SQL> create user foo identified by aaa$; User created. SQL> alter user foo identified by values 'aaa$'; alter user foo identified by values 'aaa$' * ERROR at line 1: ORA-02153: invalid VALUES password string SQL> alter user foo identified by values '---'; alter user foo identified by values '---' * ERROR at line 1: ORA-02153: invalid VALUES password string
-
IMP-00058: ORACLE error 1017 met ORA-01017: invalid username/passwo
I want to run the Import tool with the user's system, I do not see as you see below script:
I read the following thread:D:\TÖÖ\exp_ddl.dmp>sqlplus system/[email protected] as sysdba SQL*Plus: Release 10.2.0.1.0 - Production on Mon Oct 4 16:40:58 2010 Copyright (c) 1982, 2005, Oracle. All rights reserved. Connected to: Personal Oracle Database 10g Release 10.2.0.1.0 - Production With the Partitioning, OLAP and Data Mining options SQL> ALTER USER "SYSTEM" IDENTIFIED BY VALUES 'a'; User altered. SQL> quit; Disconnected from Personal Oracle Database 10g Release 10.2.0.1.0 - Production With the Partitioning, OLAP and Data Mining options D:\TÖÖ\exp_ddl.dmp>imp userid=system/[email protected] file=exp_cas_ddl.dmp log=exp_ca s_ddl.log full=y Import: Release 10.2.0.1.0 - Production on Mon Oct 4 16:41:31 2010 Copyright (c) 1982, 2005, Oracle. All rights reserved. IMP-00058: ORACLE error 1017 encountered ORA-01017: invalid username/password; logon deniedUsername: system Password: IMP-00058: ORACLE error 1017 encountered ORA-01017: invalid username/password; logon deniedUsername: SYSTEM Password: IMP-00058: ORACLE error 1017 encountered ORA-01017: invalid username/password; logon denied IMP-00005: all allowable logon attempts failed IMP-00000: Import terminated unsuccessfully D:\TÖÖ\exp_ddl.dmp>sqlplus system/[email protected] as sysdba SQL*Plus: Release 10.2.0.1.0 - Production on Mon Oct 4 16:41:53 2010 Copyright (c) 1982, 2005, Oracle. All rights reserved. Connected to: Personal Oracle Database 10g Release 10.2.0.1.0 - Production With the Partitioning, OLAP and Data Mining options SQL> select sysdate from dual; SYSDATE --------- 04-OCT-10 SQL> quit; Disconnected from Personal Oracle Database 10g Release 10.2.0.1.0 - Production With the Partitioning, OLAP and Data Mining options D:\TÖÖ\exp_ddl.dmp>sqlplus system/[email protected] SQL*Plus: Release 10.2.0.1.0 - Production on Mon Oct 4 16:46:13 2010 Copyright (c) 1982, 2005, Oracle. All rights reserved. ERROR: ORA-01017: invalid username/password; logon denied Enter user-name:
That did not help much either i think.
I want is to have a single command that works "Imp" and gives the name tns-database as an input parameter and the user_id parameter must be in pramaters. I can run this way Import?What about:
alter user system identified by A;
I guess that the command "change user
identified by values '" is the command to settig the encrypted password.
Only, it will be useful carry passwords of a database to another, but do not for the definition of passwords initially.Edited by: hartmutm the 04.10.2010 07:22
-
Hi all
I have a small problem, but I can't find the solution yet.
I created a DB1 databaselink: "create public database GO_TO_DB link
connect to TEMP identified by PW_TEMP
using DB2; »
On DB2 I have the TEMP user with password PW_TEMP thanks to subsidies for the TEST table.
In DB2, there is a table "TEST";
I'm logged into DB1 and do: SELECT * FROM TEST; I get: "ora-01017 name username/password invalid; connection refused
ORA-02063 previous line of GO_TO_DB'
messages.
I can connect to DB2 with the TEMP of the user and can select: no problem.
Also, I tried to connect with sqlplus and user TEMP on DB2: no problem.
Connect to DB1 in sqlplus and don't select it * test, I get ora messages too.
Do I did wrong or what I forgot?
Greetz, Cees
This error message means that you have provided the wrong username and password for the database that the DB connection is connected to.
If the password is case-sensitive, you must put quotation marks when you create the DB link.
The name of DB that you provided when you create the DB link could also be referring to a different database than the one you expect. You should check your tnsnames.ora file (or files) to verify this. You can also specify definitively the DB using the syntax ' host: port / SID "instead of a TNS name.
-
ORA-01017: name of user and password invalid. logon denied in the database of 12 c
Hello
I have created the new user in PDB 12 c and granted \n(Assurez-vous also,
but I coudnt able to connect to this user.
Please suggest me.
The steps that I did.
SQL > alter session set container = TESTPDB1;
Modified session.
SQL > create user test1 identified by welcome;
Created by the user.
SQL > grant connect, resources to test1;
Grant succeeded.
SQL > validation
2;
Validation complete.
SQL > conn test1/welcome.
ERROR:
ORA-01017: name of user and password invalid. connection refused
WARNING: You are more connected to ORACLE.
Concerning
Kumar V
Dear all,
The problem has been solved now.
12 c database, we could not able to connect the local user database of snap-in.
You need to connect users as below,
[oracle@dg admin] $ sqlplus sys/welcome@PDBDEV as sysdba
SQL * more: Production of the 12.1.0.2.0 version Thu Apr 16 12:56:38 2015
Copyright (c) 1982, 2014, Oracle. All rights reserved.
Connected to:
Database Oracle 12 c Enterprise Edition Release 12.1.0.2.0 - 64 bit Production
With the options of partitioning, OLAP, advanced analytics and Real Application Testing
SQL > show con_name;
CON_NAME
------------------------------
PDBDEV
SQL > create user kumar identified by kumar;
Created by the user.
SQL > grant connect, kumar resources;
Grant succeeded.
SQL > commit;
Validation complete.
SQL > conn kumar/kumar;
ERROR:
ORA-01017: name of user and password invalid. connection refused
WARNING: You are more connected to ORACLE.
SQL > conn sys as sysdba
Enter the password:
Connected.
SQL > show con_name;
CON_NAME
------------------------------
CBD$ ROOT
SQL > conn kumar/kumar@PDBDEV
Connected.
SQL > show con_name;
CON_NAME
------------------------------
PDBDEV
SQL > show user;
The USER is 'KUMAR '.
Thanks for the suggestions.
Concerning
Kumar
-
Cannot connect through the ORA-01017 Invalid Username/Password database link
Hello
I have two virtual machines with Oracle 11 g 2 and one with Oracle 12 c installed on RHEL 6
I wanted to install a dblink between the 2, but after you have created the dblink I get error: ORA - 01017 Invalid username/password
Now, I know, the error is clear enough but when I try to connect using netmgr it works
So just to summarize, Oracle 12 c, I'm trying to connect to Oracle 11 g using a DBLINK but I get ORA-01017
Since Oracle 12 c, I created a new service so that I have the remote db alias in tnsname.ora and at the end of the process, when they ask for test connection, I can connect successfully to remote db
Then I created a dblink according to the following:
SQL > CREATE PUBLIC DBLINK LINK DATABASE to CONNECT to
"hr""" IDENTIFIED BY ' password ' with the HELP of 'REMOTEDB ';
If I then select * from employees@dblink, I get the error
What I've noticed, it is that in the 11g (the target machine) I can not connect with OS authentication, don't know if its related
If i: sqlplus / as sysdba I get ORA-01031 insufficient become
I have to connect to the Linux box as user 'oracle', who is a member of the groups oinstall dba
Am I missing something?
Thank you!
CHRI$ says:
SQL > CREATE PUBLIC DATABASE LINK DBLINK TO CONNECT TO
'hr' IDENTIFIED BY 'password' with the HELP of "REMOTEDB";
You will probably have to create the link without containing the user name and the word in double quotes.
-
ORA-01017: username/password invalid name - OS authentication failure
Hi all
Oracle 11G 11.2.0.3.0 running on Windows 2008R2 64-bit
I am trying to get Windows authentication to work, local to the database server, but I continue to turn in the error ORA-01017.
C:\Users\xxx>sqlplus / SQL*Plus: Release 11.2.0.3.0 Production on Thu Aug 14 09:00:29 2014 Copyright (c) 1982, 2011, Oracle. All rights reserved. ERROR: ORA-01017: invalid username/password; logon denied
When I connect as SYS, here are the parameter values of os_auth (os_authent_suffix must be ' ' due to a requirement of the application.) We strive to connect an application to a remote server by using the windows credentials (IE DOMAIN\APPSVC)
C:\Users\xxx>sqlplus / as sysdba SQL*Plus: Release 11.2.0.3.0 Production on Thu Aug 14 09:01:26 2014 Copyright (c) 1982, 2011, Oracle. All rights reserved. Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production With the Partitioning, OLAP, Data Mining and Real Application Testing options SQL> show parameter os_auth; NAME TYPE VALUE ------------------------------------ ----------- ------------------------------ os_authent_prefix string "" remote_os_authent boolean FALSE
Here's my tnsnames file:
# tnsnames.ora Network Configuration File: C:\app\Oracle11G\product\11.2.0\dbhome_1\network\admin\tnsnames.ora # Generated by Oracle configuration tools. ORACLR_CONNECTION_DATA = (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521)) ) (CONNECT_DATA = (SID = CLRExtProc) (PRESENTATION = RO) ) ) ORCL = (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = CGYORADEV02.corp.DOMAIN.com)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = orcl.corp.DOMAIN.com) ) )
Here's my sqlnet.ora file:
# sqlnet.ora Network Configuration File: C:\app\Oracle11G\product\11.2.0\dbhome_1\network\admin\sqlnet.ora # Generated by Oracle configuration tools. # This file is actually generated by netca. But if customers choose to # install "Software Only", this file wont exist and without the native # authentication, they will not be able to connect to the database on NT. SQLNET.AUTHENTICATION_SERVICES= (NTS) NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
I created the user as below:
SQL> select * from all_users; USERNAME USER_ID CREATED ------------------------------ ---------- --------- DOMAIN\XXX 98 14-AUG-14
So the first step, what I'm trying to prove that the database server can accept and allow the windows credentials and then I take the next step in trying to test authentication remotely to this database server using authentication Windows/OS
Any help appreciated, thanks in advance
You seem to have put the os_authent_prefix to a pair of double quotes. This is not going to work! You must erase it completely, the use of quotes twosingle. Like this:
orclz >
orclz > alter system set os_authent_prefix = "scope = spfile;
Modified system.
orclz > force boot
ORACLE instance started.
Total System Global Area 784998400 bytes
Bytes of size 2407584 fixed
327156576 variable size bytes
448790528 of database buffers bytes
Redo buffers 6643712 bytes
Mounted database.
Open database.
orclz > sho setting pref
VALUE OF TYPE NAME
------------------------------------ ---------- ----------------------
asm_preferred_read_failure_groups string
os_authent_prefix string
orclz >
-
Hello, I am trying to log in as OWBSYS, and I get this error message: ORA - 01017: invalid username / password. Logon denied.
The account has been locked in time, but I've unlocked it. Could someone tell me what I would do, because I'm a little amateur.
Is it possible that I can see the users password;
OS: Windows XP.
Software: Oracle Enterprise Edition 11 GR 2.
Thank you in advance.
931546 wrote:
Hello, I am trying to log in as OWBSYS, and I get this error message: ORA - 01017: invalid username / password. Logon denied.
The account has been locked in time, but I've unlocked it. Could someone tell me what I would do, because I'm a little amateur.
Is it possible that I can see the users password;
OS: Windows XP.
Software: Oracle Enterprise Edition 11 GR 2.
Thank you in advance.
ALTER USER OWBSYS IDENTIFIED BY NEW_PASSWORD ACCOUNT UNLOCK;
-
get ORA-01017 on step 1 to configure MW
I know that this issue has been addressed before, but there is a subtle difference.
I work through a 11.5.10 R12 upgrade and click on this issue:
=================
And verify that the distance EOF_HOME is only a directory name, and not a trace...
ERROR:
ORA-01017: name of user and password invalid. connection refused
SP2-0640: not connected
SP2-0670: internal number conversion failed
=================
I'm on 2.18 and it comes to the race 3 attempts, the first 2 runs failed both times with questions of my own making but this step completed successfully.
The third race through it gives this error twice, then it locks the account MW.
I can connect to sqlplus as system and reset the account and reset once I can also connect to sqlplus as account with the original password, with what I put up MW.
Is it possible to let the automated scripts to find out what the users MW password is again?
Thank you
SimonWhat is the first character of the password that you use for MW - if it is a number from 0-9, it will fail to successfully install.
Please upload the log file mw_install_0910211411.log - your date and time stamp will be different
-
ORA-01017 encountered during execution of shell scripts
Hello
During execution of the backup script for one of my databases, the script contains a login section which breaks down as shown below
Section login script:
sqlplus / < < END > /tmp/$PROGRAM.tmp
Error generatedf in the log file:
SQL * more: Production release 11.2.0.3.0 on sea Apr 10 11:32:06 2013
Copyright (c) 1982, 2011, Oracle. All rights reserved.
ERROR:
ORA-01017: name of user and password invalid. connection refused
Two points to note:
1) there are two other databases on the same server and they have no problem
(2) I am able to connect to this database as ' / '.
(3) I am able to connect to the database as sysdba from another server
(4) the script runs successfully when I change like: sqlplus / as sysdba < < END > /tmp/$PROGRAM.tmpHi, for the use of this you must create a user authenticated externally then it will work... Check other databases where you are using the sqlplus / connection for your refrence command
-
ORA-01017 when you add the name of the service
Hello
In short, I can connect locally with "sqlplus USER/pass. However, I can not connect with "sqlplus USER/pass@zabbix" or I can't connect externally using thin client:
PS C:\ > sqlplus USER/pass@zabbix
SQL * more: version 11.1.0.7.0 - Production on Tue Mar 12 10:35:21 2013
Copyright (c) 1982, 2008, Oracle. All rights reserved.
ERROR:
ORA-01017: name of user and password invalid. connection refused
How can I solve this? I can connect to the outside as SYS as SYSDBA. Will there be a privilege to allow users to connect to a particular database?
-----
I create the user like this:
CREATE A USER
IDENTIFIED BY PASS
DEFAULT TABLESPACE USERS
TEMPORARY TEMP TABLESPACE
DEFAULT PROFILE
RELEASE OF ACCOUNT;
GRANT ALTER USER SESSION;
GRANT CREATE SESSION FOR THE USER;
GRANT CONNECT TO THE USER;
ALTER USER DEFAULT ROLE USER;
-----
tnsnames.ora:
ZABBIX =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = a.dom.b.com) (PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = zabbix)
)
)
-----
PS C:\ > lsnrctl status
LSNRCTL for 64-bit Windows: Version 11.1.0.7.0 - Production on March 12, 2013 10:18:34
Copyright (c) 1991, 2008, Oracle. All rights reserved.
Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP (PORT = 1)(HOST=a.dom.b.com)
STATUS of the LISTENER
------------------------
Alias LISTENER
TNSLSNR for Windows 64-bit version: Version 11.1.0.7.0 - Production
Start date March 1, 2013 16:15:25
Uptime 10 days 17 HR. 3 min. 24 sec.
Draw level off
Security ON: OS Local Authentication
SNMP OFF
D:\...\listener.ora Listener parameter file
D:\...\Log.XML log listener
Summary of endpoints listening...
(DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=a.dom.b.com) (PORT = 1521)))
Summary of services...
Service 'zabbix' has 1 instance (s).
Instance 'zabbix' READY State, has 1 operation for this service...
-----
PS C:\ > tnsping zabbix
AMT Ping Utility for 64-bit Windows: Version 11.1.0.7.0 - Production on March 12, 2013 10:18:15
Copyright (c) 1997, 2008, Oracle. All rights reserved.
Use settings files:
d:\...\sqlnet.ora
TNSNAMES adapter used to resolve the alias
Try to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = a.dom.b.com) (PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = zabbix)))
OK (0 msec)
Edited by: 970022 March 12, 2013 08:35
Edited by: 970022 March 12, 2013 08:51
Edited by: 970022 March 12, 2013 08:54970022 wrote:
I agree with your chances. The answer may be as simple as associate an account with a database. I posted the way in which the user was created. The user has been created through SQLPLUS SYS as SYSDBA user. I can't find any documentation that describes how to link a user to a database.sqlplus USER/pass@zabbix
you are "assuming" happens above to a specific database.
What evidence do you have that you REALLY get to the DB where you know what USER/pass are?
Maybe you are looking for
-
macOS bug Sierra - Possible? (Terminal)
I use the Terminal Df-h command to find the percentage of used space on the hard drive of my Mac, and I've noticed that since the upgrade to Mac OS Sierra; It came out that I used 0% (which may not be true); I was wondering could this be a bug and th
-
Possible replacement of Equium A100 - 147 HDD 250 GB?
Hello I own an Equium A100-147 with 60 GB HARD drive. I have a recovery disc and have restored the laptop several times. I am considering an upgrade to 250 GB HARD drive. Couple of questions... The motherboard will host a 250 GB drive? If I replace t
-
Transportation co to move my furniture in Houston, Tx for Calif.
I need a transportation company to move my furniture in Houston, Texas to Cudahy, Ca
-
SigmaTel High Definition Audio CODEC is not compatible with Windows 7
SigmaTel High Definition Audio CODEC does not work with windows 7. I tried to get my laptop to detect the hardware and it doesn't seem to be compatible with windows 7. I tried to update but without the cell knowing that its here I can't update. What
-
How know 'useless' Packages VC ++?
Hello Recently, I uninstalled a lot of games from my laptop, and what was left was then a whole ton of VC ++ Redistributables. 2005-2 packages 2008-6 packages Package-1 2010 2012-1 package As I come to the understanding that most of them is not used