ORA-01017

Hello, I am trying to log in as OWBSYS, and I get this error message: ORA - 01017: invalid username / password. Logon denied.

The account has been locked in time, but I've unlocked it. Could someone tell me what I would do, because I'm a little amateur.

Is it possible that I can see the users password;

OS: Windows XP.

Software: Oracle Enterprise Edition 11 GR 2.

Thank you in advance.

931546 wrote:

Hello, I am trying to log in as OWBSYS, and I get this error message: ORA - 01017: invalid username / password. Logon denied.

The account has been locked in time, but I've unlocked it. Could someone tell me what I would do, because I'm a little amateur.

Is it possible that I can see the users password;

OS: Windows XP.

Software: Oracle Enterprise Edition 11 GR 2.

Thank you in advance.

ALTER USER OWBSYS IDENTIFIED BY NEW_PASSWORD ACCOUNT UNLOCK;

Tags: Database

Similar Questions

  • ORA-01017 logging in OEM as sysdba but not as usual

    I have a 10,2.0.4 database of area B which was created from a cold backup of a database on the box has (Solaris 10).  The agent is 11.1.0.1 as the database on area C (Linux) with the OEM repository.

    I created a (fs) user that has sysdba privileges in the 10.2.0.4 database on box A.  Since the creation of a cold backup of database box A box B database, the user exists with the same privileges and password.

    OEM, when I connect to the database on the box, I can connect with fs user, password and then in the drop-down menu, select sysdba and I connect.  When I try to log in using the OEM for the database on the zone B, I enter the user as fs, give the password, click the menu drop down and assign sysdba and the connection fails and ORA-01017.  I tried to retype the password and it has not yet.  I've logged in area B, connected with fs as sysdba in sqlplus and had no problems.  I went back to the OEM and tried again with the error 1017.

    Here's the weird thing: if I try to connect as fs in OEM to database of area B, but leave it as 'normal', the connection works fine.  It only fails when I try to open a session using fs as sysdba and who fails only OEM.

    Someone at - he already seen this before?

    Hello

    have you copied the orapwd file?

    Check on the box A and box B select * from V$ PWFILE_USERS;

    Are the results the same?

    Best regards

    Kuba

  • ORA-01017 with database link

    Hi all

    I have a small problem, but I can't find the solution yet.

    I created a DB1 databaselink: "create public database GO_TO_DB link

    connect to TEMP identified by PW_TEMP

    using DB2; »

    On DB2 I have the TEMP user with password PW_TEMP thanks to subsidies for the TEST table.

    In DB2, there is a table "TEST";

    I'm logged into DB1 and do: SELECT * FROM TEST;  I get: "ora-01017 name username/password invalid; connection refused

    ORA-02063 previous line of GO_TO_DB'

    messages.

    I can connect to DB2 with the TEMP of the user and can select: no problem.

    Also, I tried to connect with sqlplus and user TEMP on DB2: no problem.

    Connect to DB1 in sqlplus and don't select it * test, I get ora messages too.

    Do I did wrong or what I forgot?

    Greetz, Cees

    This error message means that you have provided the wrong username and password for the database that the DB connection is connected to.

    If the password is case-sensitive, you must put quotation marks when you create the DB link.

    The name of DB that you provided when you create the DB link could also be referring to a different database than the one you expect. You should check your tnsnames.ora file (or files) to verify this. You can also specify definitively the DB using the syntax ' host: port / SID "instead of a TNS name.

  • java.lang.Exception: ORA-01017: name of user and password invalid. connection refused - wait_bottlenecks

    Hello

    I have been using OEM for the monitoring of the database. Recently, I've seen more error on screen

    java.lang.Exception: ORA-01017: name of user and password invalid. connection refused - wait_bottlenecks

    So I reset password with the same value to reopen. I still get this error.


    When I try to sign in with the same password in sqlplus, I get same error also.


    SQL > alter user DBSNMP identified by the values '-';

    Modified user.

    SQL > connect DBSNMP.

    ERROR:

    ORA-01017: name of user and password invalid. connection refused


    I don't know why I'm not able to login with the same password I used to change the statement.


    Thanks for the help in advance.

    Let's not your syntax.

    When you say 'identified by values' you tell Oracle 'this is not the password, but it is a salted and hashed password.

    Do not use 'values '.

    Technically,-is not a password valid, so I'll use it valid to demonstrate:

    In 12.1.0.2, it will not allow you to use '-' because this isn't a valid hash value, so I can't prove that it works, but you get the idea

    SQL> grant create session to foo;                     

Grant succeeded.                                     

SQL> conn foo/aaa$
Connected.
SQL> conn / as sysdba
Connected.
SQL> drop user foo cascade;                           

User dropped.                                         

SQL> create user foo identified by values 'aaa$';
create user foo identified by values 'aaa$'
*
ERROR at line 1:
ORA-02153: invalid VALUES password string             

SQL> create user foo identified by aaa$;             

User created.                                         

SQL> alter user foo identified by values 'aaa$';
alter user foo identified by values 'aaa$'
*
ERROR at line 1:
ORA-02153: invalid VALUES password string             

SQL> alter user foo identified by values '---';
alter user foo identified by values '---'
*
ERROR at line 1:
ORA-02153: invalid VALUES password string

  • ORA-01017: name of user and password invalid. logon denied in the database of 12 c

    Hello


    I have created the new user in PDB 12 c and granted \n(Assurez-vous also,

    but I coudnt able to connect to this user.

    Please suggest me.

    The steps that I did.

    SQL > alter session set container = TESTPDB1;

    Modified session.

    SQL > create user test1 identified by welcome;

    Created by the user.

    SQL > grant connect, resources to test1;

    Grant succeeded.

    SQL > validation

    2;

    Validation complete.


    SQL > conn test1/welcome.

    ERROR:

    ORA-01017: name of user and password invalid. connection refused

    WARNING: You are more connected to ORACLE.


    Concerning

    Kumar V


    Dear all,

    The problem has been solved now.

    12 c database, we could not able to connect the local user database of snap-in.

    You need to connect users as below,

    [oracle@dg admin] $ sqlplus sys/welcome@PDBDEV as sysdba

    SQL * more: Production of the 12.1.0.2.0 version Thu Apr 16 12:56:38 2015

    Copyright (c) 1982, 2014, Oracle.  All rights reserved.

    Connected to:

    Database Oracle 12 c Enterprise Edition Release 12.1.0.2.0 - 64 bit Production

    With the options of partitioning, OLAP, advanced analytics and Real Application Testing

    SQL > show con_name;

    CON_NAME

    ------------------------------

    PDBDEV

    SQL > create user kumar identified by kumar;

    Created by the user.

    SQL > grant connect, kumar resources;

    Grant succeeded.

    SQL > commit;

    Validation complete.

    SQL > conn kumar/kumar;

    ERROR:

    ORA-01017: name of user and password invalid. connection refused

    WARNING: You are more connected to ORACLE.

    SQL > conn sys as sysdba

    Enter the password:

    Connected.

    SQL > show con_name;

    CON_NAME

    ------------------------------

    CBD$ ROOT

    SQL > conn kumar/kumar@PDBDEV

    Connected.

    SQL > show con_name;

    CON_NAME

    ------------------------------

    PDBDEV

    SQL > show user;

    The USER is 'KUMAR '.

    Thanks for the suggestions.

    Concerning

    Kumar

  • Cannot connect through the ORA-01017 Invalid Username/Password database link

    Hello

    I have two virtual machines with Oracle 11 g 2 and one with Oracle 12 c installed on RHEL 6

    I wanted to install a dblink between the 2, but after you have created the dblink I get error: ORA - 01017 Invalid username/password

    Now, I know, the error is clear enough but when I try to connect using netmgr it works

    So just to summarize, Oracle 12 c, I'm trying to connect to Oracle 11 g using a DBLINK but I get ORA-01017

    Since Oracle 12 c, I created a new service so that I have the remote db alias in tnsname.ora and at the end of the process, when they ask for test connection, I can connect successfully to remote db

    Then I created a dblink according to the following:

    SQL > CREATE PUBLIC DBLINK LINK DATABASE to CONNECT to

    "hr""" IDENTIFIED BY ' password ' with the HELP of 'REMOTEDB ';

    If I then select * from employees@dblink, I get the error

    What I've noticed, it is that in the 11g (the target machine) I can not connect with OS authentication, don't know if its related

    If i: sqlplus / as sysdba I get ORA-01031 insufficient become

    I have to connect to the Linux box as user 'oracle', who is a member of the groups oinstall dba

    Am I missing something?

    Thank you!

    CHRI$ says:

    SQL > CREATE PUBLIC DATABASE LINK DBLINK TO CONNECT TO

    'hr' IDENTIFIED BY 'password' with the HELP of "REMOTEDB";

    You will probably have to create the link without containing the user name and the word in double quotes.

  • avctl start_collector - java.sql.SQLException: ORA-01017: name of user and password invalid. connection refused

    Hi all

    I was hoping you could help me.  After a server restart scheduled that I tried to start my fundraiser, when I did, I got the following error:

    09/29/14 10:19:36       Error executing command start_collector
Internal Error
        at oracle.av.common.AuditException.toAuditException(AuditException.java:253)
        at oracle.av.management.impl.HttpManagementAdaptor.getData(HttpManagementAdaptor.java:259)
        at oracle.av.management.impl.HttpManagementAdaptor.getData(HttpManagementAdaptor.java:291)
        at oracle.av.management.impl.HttpManagementAdaptor.startCollector(HttpManagementAdaptor.java:434)
        at oracle.av.management.impl.ManagementServiceImpl.startCollector(ManagementServiceImpl.java:651)
        at oracle.av.management.impl.ManagementServiceImpl.startCollector(ManagementServiceImpl.java:696)
        at oracle.av.management.impl.ManagementServiceImpl.startCollector(ManagementServiceImpl.java:707)
        at oracle.av.avca.control.StartCollectorTask.executeTask(StartCollectorTask.java:82)
        at oracle.av.avca.backend.BaseTask.execute(BaseTask.java:104)
        at oracle.av.avca.Avctl.startCTL(Avctl.java:180)
        at oracle.av.avca.Avctl.main(Avctl.java:213)
Nested Exception:
java.sql.SQLException: ORA-28001: the password has expired
        at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
        at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:67)
        at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:45)
        at java.lang.reflect.Constructor.newInstance(Constructor.java:522)
        at oracle.av.common.AuditException.toAuditException(AuditException.java:250)
        at oracle.av.management.impl.HttpManagementAdaptor.getData(HttpManagementAdaptor.java:259)
        at oracle.av.management.impl.HttpManagementAdaptor.getData(HttpManagementAdaptor.java:291)
        at oracle.av.management.impl.HttpManagementAdaptor.startCollector(HttpManagementAdaptor.java:434)
        at oracle.av.management.impl.ManagementServiceImpl.startCollector(ManagementServiceImpl.java:651)
        at oracle.av.management.impl.ManagementServiceImpl.startCollector(ManagementServiceImpl.java:696)
        at oracle.av.management.impl.ManagementServiceImpl.startCollector(ManagementServiceImpl.java:707)
        at oracle.av.avca.control.StartCollectorTask.executeTask(StartCollectorTask.java:82)
        at oracle.av.avca.backend.BaseTask.execute(BaseTask.java:104)
        at oracle.av.avca.Avctl.startCTL(Avctl.java:180)
        at oracle.av.avca.Avctl.main(Avctl.java:213)

    So I checked the database of Audit Vault and of course, uses that have expired there, Audit Vault users expire after 180 days.

    SELECT username, account_status, expiry_date
  FROM dba_users
WHERE account_status = 'EXPIRED';

    I had a user "AGENT_BW3", which has expired. I also had the SYSAV & AVREPORTUSER that have expired.  So I changed my profile and then reset the password for these uses to the same than what have been before

    Now when I try to restart the collector, I get the following:

    09/29/14 10:36:02       Error executing command start_collector
Internal Error
        at oracle.av.common.AuditException.toAuditException(AuditException.java:253)
        at oracle.av.management.impl.HttpManagementAdaptor.getData(HttpManagementAdaptor.java:259)
        at oracle.av.management.impl.HttpManagementAdaptor.getData(HttpManagementAdaptor.java:291)
        at oracle.av.management.impl.HttpManagementAdaptor.startCollector(HttpManagementAdaptor.java:434)
        at oracle.av.management.impl.ManagementServiceImpl.startCollector(ManagementServiceImpl.java:651)
        at oracle.av.management.impl.ManagementServiceImpl.startCollector(ManagementServiceImpl.java:696)
        at oracle.av.management.impl.ManagementServiceImpl.startCollector(ManagementServiceImpl.java:707)
        at oracle.av.avca.control.StartCollectorTask.executeTask(StartCollectorTask.java:82)
        at oracle.av.avca.backend.BaseTask.execute(BaseTask.java:104)
        at oracle.av.avca.Avctl.startCTL(Avctl.java:180)
        at oracle.av.avca.Avctl.main(Avctl.java:213)
Nested Exception:
java.sql.SQLException: ORA-01017: invalid username/password; logon denied
        at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
        at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:67)
        at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:45)
        at java.lang.reflect.Constructor.newInstance(Constructor.java:522)
        at oracle.av.common.AuditException.toAuditException(AuditException.java:250)
        at oracle.av.management.impl.HttpManagementAdaptor.getData(HttpManagementAdaptor.java:259)
        at oracle.av.management.impl.HttpManagementAdaptor.getData(HttpManagementAdaptor.java:291)
        at oracle.av.management.impl.HttpManagementAdaptor.startCollector(HttpManagementAdaptor.java:434)
        at oracle.av.management.impl.ManagementServiceImpl.startCollector(ManagementServiceImpl.java:651)
        at oracle.av.management.impl.ManagementServiceImpl.startCollector(ManagementServiceImpl.java:696)
        at oracle.av.management.impl.ManagementServiceImpl.startCollector(ManagementServiceImpl.java:707)
        at oracle.av.avca.control.StartCollectorTask.executeTask(StartCollectorTask.java:82)
        at oracle.av.avca.backend.BaseTask.execute(BaseTask.java:104)
        at oracle.av.avca.Avctl.startCTL(Avctl.java:180)
        at oracle.av.avca.Avctl.main(Avctl.java:213)

    Now of course I went on this issue the wrong way, is - that someone has encountered this problem before?

    Just to add, I tried to connect with the same passwords for all users of Audit Vault in sqlplus and all work fine, its only the "start_collector" that has the problem.

    Kind regards.

    I fixed it by following these steps.

    When the audit Vault database is created all users will see the profile by DEFAULT, it is a grace expires 180 days.  I needed to reset user passwords that I did.  The part that missed me, was that even if I put the passwords for what they had been before the expiry I still need to change the portfolio.

    sqlplus SYSAVDVA/xx

    -User AV_ADMIN

    ALTER USER SYSAV IDENTIFIED BY xx;

    -Server wallet

    CD $ORACLE_HOME/network/admin/avwallet

    AVCA create_credential - wrl. dbalias - av - usr SYSAV/xx

    sqlplus SYSAVDVA/xx

    -User AV_AGENT

    ALTER USER IDENTIFIED BY AGENT_BW3 xx.

    -Portfolio Officer

    CD $ORACLE_HOME/network/admin/avwallet

    AVCA create_credential - wrl. dbalias - av - usr AGENT_BW3/xx

    This fixed the problem.

  • ORA-01017: username/password invalid name - OS authentication failure

    Hi all

    Oracle 11G 11.2.0.3.0 running on Windows 2008R2 64-bit

    I am trying to get Windows authentication to work, local to the database server, but I continue to turn in the error ORA-01017.

    C:\Users\xxx>sqlplus /
SQL*Plus: Release 11.2.0.3.0 Production on Thu Aug 14 09:00:29 2014
Copyright (c) 1982, 2011, Oracle.  All rights reserved.
ERROR:
ORA-01017: invalid username/password; logon denied

    When I connect as SYS, here are the parameter values of os_auth (os_authent_suffix must be ' ' due to a requirement of the application.) We strive to connect an application to a remote server by using the windows credentials (IE DOMAIN\APPSVC)

    C:\Users\xxx>sqlplus / as sysdba
SQL*Plus: Release 11.2.0.3.0 Production on Thu Aug 14 09:01:26 2014
Copyright (c) 1982, 2011, Oracle.  All rights reserved.

Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> show parameter os_auth;
NAME                                 TYPE        VALUE
------------------------------------ ----------- ------------------------------
os_authent_prefix                    string      ""
remote_os_authent                    boolean     FALSE

    Here's my tnsnames file:

    # tnsnames.ora Network Configuration File: C:\app\Oracle11G\product\11.2.0\dbhome_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
ORACLR_CONNECTION_DATA =
  (DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
    )
    (CONNECT_DATA =
      (SID = CLRExtProc)
      (PRESENTATION = RO)
    )
  )
ORCL =
  (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = CGYORADEV02.corp.DOMAIN.com)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = orcl.corp.DOMAIN.com)
    )
  )

    Here's my sqlnet.ora file:

    # sqlnet.ora Network Configuration File: C:\app\Oracle11G\product\11.2.0\dbhome_1\network\admin\sqlnet.ora
# Generated by Oracle configuration tools.
# This file is actually generated by netca. But if customers choose to 
# install "Software Only", this file wont exist and without the native 
# authentication, they will not be able to connect to the database on NT.
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)

    I created the user as below:

    SQL> select * from all_users;
USERNAME                          USER_ID CREATED
------------------------------ ---------- ---------
DOMAIN\XXX               98 14-AUG-14

    So the first step, what I'm trying to prove that the database server can accept and allow the windows credentials and then I take the next step in trying to test authentication remotely to this database server using authentication Windows/OS

    Any help appreciated, thanks in advance

    You seem to have put the os_authent_prefix to a pair of double quotes. This is not going to work! You must erase it completely, the use of quotes twosingle. Like this:

    orclz >

    orclz > alter system set os_authent_prefix = "scope = spfile;

    Modified system.

    orclz > force boot

    ORACLE instance started.

    Total System Global Area 784998400 bytes

    Bytes of size 2407584 fixed

    327156576 variable size bytes

    448790528 of database buffers bytes

    Redo buffers 6643712 bytes

    Mounted database.

    Open database.

    orclz > sho setting pref

    VALUE OF TYPE NAME

    ------------------------------------ ---------- ----------------------

    asm_preferred_read_failure_groups string

    os_authent_prefix string

    orclz >

  • ORA-01017: name of user and password invalid. connection refused

    Hello

    After changing the password of a user I couldn't connect the user with the changed password.

    Can any one help in this issue?

    Concerning

    Ngoyi

    ---------------------------------------------

    Please see the script below:

    SQL > alter user Sheriff identified by the values "sh123456";

    Modified user.

    SQL >

    SQL >

    SQL >

    SQL > conn Sheriff/sh123456;

    ERROR:

    ORA-01017: name of user and password invalid. connection refused

    WARNING: You are more connected to ORACLE.

    SQL >

    -----------------------------------------------------------------------------

    identified by the values "sh123456";

    Don't set the sh123456 password.  It defines the hash to sh123456.  The password is something else.

    If you want the password to be sh123456, the command would be

    alter user identified by sh123456 Sheriff;

    Hemant K Collette

  • ORA-01017 when duplicate RMAN database active

    Hello, ORACLE guru!

    I have some difficulties trying to reproduce DB via RMAN duplicate from active database.

    The script is simple:

     run
 {
 allocate channel ch1 device type disk;
 allocate auxiliary channel aux1 device type disk;
 duplicate target database to mydb from active database;
 }

    The problem is in this summary:

    Starting backup at 15-JAN-14
channel ch1: starting datafile copy
copying current control file
Oracle instance started


Total System Global Area   10689474560 bytes


Fixed Size                     2237776 bytes
Variable Size               4227861168 bytes
Database Buffers            6442450944 bytes
Redo Buffers                  16924672 bytes


contents of Memory Script:
{
   sql clone "alter system set  db_name =
''mydb'' comment=
''Reset to original value by RMAN'' scope=spfile";
   sql clone "alter system reset  db_unique_name scope=spfile";
   shutdown clone immediate;
}
executing Memory Script


sql statement: alter system set  db_name =  ''mydb'' comment= ''Reset to original value by RMAN'' scope=spfile


sql statement: alter system reset  db_unique_name scope=spfile


Oracle instance shut down
released channel: ch1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 01/15/2014 12:16:07
RMAN-05501: aborting duplication of target database
RMAN-03015: error occurred in stored script Memory Script
RMAN-03009: failure of backup command on ch1 channel at 01/15/2014 12:15:57
ORA-17629: Cannot connect to the remote database server
ORA-17627: ORA-01017: invalid username/password; logon denied
ORA-17629: Cannot connect to the remote database server


RMAN>
RMAN>

    check and see the differences:

    The database with RMAN duplicate

  • OEM 12.1.0.3 Setup fails with ora-01017

    Greetings,

    I'm trying to upgrade my OEM 12.1.0.1 installation at 12.1.0.3. I'm following the instructions in the Oracle Enterprise Manager Cloud control Upgrade Guide and Support Oracle Note 1568143.1. I checked that all the prerequisites are met and have installed patch 11061801 in the repository. The repository and WHO are on different computers. The 12.1.0.1 installation is able to connect to the repository, it worked successfully for some time now. On the SGD server, quit the SGC and Agent and I invoke the 12.1.0.3 installation program. I followed the steps and when it gets to the login page, it fails with ORA-01017. Messages are displayed -

    1. check if the SYS password you have entered is valid.

    2. check if the REMOTE_LOGIN_PASSWORDFILE database initialization parameter is set to either shared or Exclusive.

    3. check whether a file with the file name orapw < SID > password exists in the < ORACLE_HOME > / dbs directory.

    All the conditions are met:

    -bash-3, $ 2 echo $ORACLE_SID

    oemrepos

    SQL > connect sys as sysdba

    Enter the password:

    Connected.

    SQL > connect sysman

    Enter the password:

    Connected.

    SQL > show parameter remote_login_passwordfile

    VALUE OF TYPE NAME

    ------------------------------------ ----------- ------------------------------

    Remote_login_passwordfile string EXCLUSIVE

    -bash-3, $ 2 ls-l $ORACLE_HOME/dbs/orapwoemrepos

    -rw - r - 1 oracle dba 1536 January 30, 2013 /usr/local/oracle/app/oracle/product/11.2.0/dbhome_1/dbs/orapwoemrepos

    I am able to connect remotely from another machine. sqlplus is not installed on the SGD server.

    I am completely confused and need help. Web search indicates only that I need to make sure that the conditions listed above must be met, they are. If anyone has any suggestions I would appreciate the help.

    Thank you.

    Bill Wagman

    The problem has been resolved by recreating the password file. I used the same password. I don't understand yet why however.

    Thank you

    Bill Wagman

  • ERROR: ORA-01017: name of user and password invalid. connection refused

    Hi all

    I need your help.

    I have installed Oracle Audit Vault Server Release 10.2.3.2 in agent collection and Linux system in Windows system. Adding and start collecting DBAUD went fine however adding AGAIN collector back return errors when executing command avorcldb add_collector as follows

    [oracle@avsrv ~] $

    [oracle@avsrv ~] $ avorcldb add_collector - SrcName orcl nom_agent - avagent01 - colltype REDO - av Lugaopc:1521:orcl

    collector REDO_Collector for orcl source already exists

    the initialization of the REDO Collector

    ERROR: could not get by using jdbc connection AV source user:oracle:oci:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=Lugaopc)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=orcl)))

    ERROR: ORA-01017: name of user and password invalid. connection refused

    [oracle@avsrv ~] $

    Here are the contents of the avorcldb.log file

    09/09/13 16:58:44 [INFO] command add_collector treatment

    09/09/13 16:58:44 [INFO] treatment arg - FromName = orcl

    09/09/13 16:58:44 [INFO] treatment arg - nom_agent = avagent01

    09/09/13 16:58:44 [INFO] treatment arg - colltype = REDO

    09/09/13 16:58:44 [INFO] treatment arg - av = Lugaopc:1521:orcl

    09/09/13 16:58:44 [INFO] connect information: Lugaopc:1521:orcl

    09/09/13 16:58:45 [INFO] connecting administration AV got using jdbc:oracle:oci:@AVDB

    09/09/13 16:58:45 [INFO] execution SQL like [ADM@AV] select s.host |': ' | A1.num_value |': ' | avsys.av A2.char_value $attrvalue a1, a2 avsys.av$ attrvalue, avsys.av$ s source, avsys.av$ attrdef ad1, ad2 avsys.av$ attrdef where source_name =: 1 and a1.inst_id = s.source_id and a2.inst_id = s.source_id and a1.attr_id = ad1.attr_id and ad1.attr_name = 'PORT' and a2.attr_id = ad2.attr_id and ad2.attr_name = 'DB_SERVICE. '

    09/09/13 16:58:45 [INFO] using bind value orcl

    09/09/13 16:58:45 [INFO] Return value = Lugaopc:1521:orcl

    09/09/13 16:58:45 [INFO] connect information: Lugaopc:1521:orcl

    09/09/13 16:58:45 [INFO] execution SQL like [ADM@AV] select to_char (source_id) in the avsys.av$ source where source_name =: 1

    09/09/13 16:58:45 [INFO] using bind value orcl

    09/09/13 16:58:45 [INFO] return value = 1

    09/09/13 16:58:46 [INFO] got the source user connection using jdbc:oracle:oci:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=Lugaopc)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=orcl)))

    09/09/13 16:58:46 [INFO] executing SQL in [ADM@AV] select decode (c.status, 1, 'active', 0, 'fallen', null) of avsys.av$ collector c, avsys.av$ s source where source_name =: 1 and collector_name =: 2 and c.source_id = s.source_id

    09/09/13 16:58:46 [INFO] using bind value orcl

    09/09/13 16:58:46 [INFO] bind Using REDO_Collector value

    09/09/13 16:58:46 [INFO] Return value = active

    09/09/13 16:58:46 [MESG] collector REDO_Collector for orcl source already exists

    09/09/13 16:58:46 [INFO] executing SQL in [ADM@AV] select decode (c.status, 1, 'active', 0, 'fallen', null) of avsys.av$ collector c, avsys.av$ s source where source_name =: 1 and collector_name =: 2 and c.source_id = s.source_id

    09/09/13 16:58:46 [INFO] using bind value orcl

    09/09/13 16:58:46 [INFO] bind Using REDO_Collector value

    09/09/13 16:58:46 [INFO] Return value = active

    09/09/13 16:58:46 [MESG] initialization REDO Collector

    09/09/13 16:58:46 [INFO] execution SQL like [ADM@AV] select the username of avsys.av$ source where source_name =: 1

    09/09/13 16:58:46 [INFO] using bind value orcl

    09/09/13 16:58:46 [INFO] Return value = AVSRCUSR1

    09/09/13 16:58:46 [INFO] as [ADM@AV] SQL execution {? = call avsys.dbms_audit_vault.reset_source_user (?)}

    09/09/13 16:58:46 [INFO] adding user password mask

    09/09/13 16:58:46 [INFO] execution SQL like [USR@SRC] select table_name from user_tables where upper (table_name) = upper(:1)

    09/09/13 16:58:46 [INFO] bind Using STREAMS_HEARTBEAT value

    09/09/13 16:58:46 [INFO] Return value = STREAMS_HEARTBEAT

    09/09/13 16:58:46 [INFO] execution as [USR@SRC] SQL drop table streams_heartbeat

    09/09/13 16:58:46 [INFO] execution as [USR@SRC] SQL create table streams_heartbeat (src_dbname varchar2 (4000), job_number number, heartbeat_time timestamp)

    09/09/13 16:58:46 [INFO] execution SQL like [USR@SRC] declare dbs_name varchar2 (4000); start selecting rename in dbs_name from global_name; insert into streams_heartbeat values (dbs_name, 0, SYSTIMESTAMP); end;

    09/09/13 16:58:46 [INFO] SQL execution as [USR@SRC] create or replace procedure update_heartbeat IS start update streams_heartbeat set heartbeat_time = (select systimestamp from double); commit; end;

    09/09/13 16:58:46 [INFO] execution SQL like [USR@SRC] select table_name from user_tables where upper (table_name) = upper(:1)

    09/09/13 16:58:46 [INFO] bind Using CAPTURE_RULES value

    09/09/13 16:58:46 [INFO] Return value = CAPTURE_RULES

    09/09/13 16:58:46 [INFO] execution as [USR@SRC] SQL drop table capture_rules

    09/09/13 16:58:46 [INFO] execution as [USR@SRC] SQL create table capture_rules (nom_regle varchar2 (50), rule_scope varchar2 (6), rule_type VARCHAR2 (3), obj_name varchar2 (100))

    09/09/13 16:58:46 [INFO] execution SQL like [ADM@AV] select Rename global_name

    09/09/13 16:58:46 [INFO] Return value is AVDB. AVSRV

    09/09/13 16:58:46 [INFO] execution SQL like [USR@SRC] select db_link in user_db_links where db_link =: 1

    09/09/13 16:58:46 [INFO] Using AVDB bind value. AVSRV

    09/09/13 16:58:46 [INFO] Return value is AVDB. AVSRV

    09/09/13 16:58:46 [INFO] the Execute SQL as database link [USR@SRC] drop "AVDB. AVSRV ".

    09/09/13 16:58:46 [INFO] execution SQL like [USR@SRC] select the version of v$ instance

    09/09/13 16:58:46 [INFO] Return value = 11.2.0.1.0

    09/09/13 16:58:46 [INFO] creating DB link using AVDB. AVSRV, AVSRCUSR1, {avsrcusr_pwd}, Lugaopc, 1521, orcl

    09/09/13 16:58:46 [INFO] login as srcuser_ora01 to @(DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=Lugaopc) (PORT = 1521)) (CONNECT_DATA = (SERVICE_NAME = orcl)))

    09/09/13 16:58:46 [INFO] output of SQLPlus

    09/09/13 16:58:46 [INFO]

    09/09/13 16:58:46 [INFO] Package created.

    09/09/13 16:58:46 [INFO]

    09/09/13 16:58:46 [INFO] no error.

    09/09/13 16:58:47 [INFO]

    09/09/13 16:58:47 [INFO] package body created.

    09/09/13 16:58:47 [INFO]

    09/09/13 16:58:47 [INFO] no error.

    09/09/13 16:58:47 [INFO]

    09/09/13 16:58:47 [INFO] Package created.

    09/09/13 16:58:47 [INFO]

    09/09/13 16:58:47 [INFO] no error.

    09/09/13 16:58:47 [INFO]

    09/09/13 16:58:47 [INFO] package body created.

    09/09/13 16:58:47 [INFO]

    09/09/13 16:58:47 [INFO] no error.

    09/09/13 16:58:47 [INFO] execution SQL like [USR@SRC] select distinct name of user_errors, whose name =: 1

    09/09/13 16:58:47 [INFO] bind Using DBMS_SRC_STREAMS_COLLECTOR value

    09/09/13 16:58:47 [INFO] Return value = null

    09/09/13 16:58:47 [ERROR] could not get by using jdbc connection AV source user:oracle:oci:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=Lugaopc)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=orcl)))

    09/09/13 16:58:47 [ERROR] ORA-01017: name of user and password invalid. connection refused

    java.sql.SQLException: ORA-01017: name of user and password invalid. connection refused

    at oracle.jdbc.driver.T2CConnection.checkError(T2CConnection.java:765)

    at oracle.jdbc.driver.T2CConnection.logon(T2CConnection.java:414)

    to oracle.jdbc.driver.PhysicalConnection. < init > (PhysicalConnection.java:546)

    to oracle.jdbc.driver.T2CConnection. < init > (T2CConnection.java:162)

    at oracle.jdbc.driver.T2CDriverExtension.getConnection(T2CDriverExtension.java:53)

    at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:521)

    at java.sql.DriverManager.getConnection(DriverManager.java:525)

    at java.sql.DriverManager.getConnection(DriverManager.java:140)

    to oracle.av.avca.jdbc.JdbcConnection. < init > (JdbcConnection.java:87)

    at oracle.av.orcldb.DAO.initConnection(DAO.java:79)

    to oracle.av.orcldb.DAO. < init > (DAO.java:64)

    at oracle.av.orcldb.commands.AddCollector.setupCollector(AddCollector.java:746)

    at oracle.av.orcldb.commands.AddCollector.execute(AddCollector.java:230)

    at oracle.av.orcldb.Command.process(Command.java:89)

    at oracle.av.orcldb.Main.process(Main.java:118)

    at oracle.av.orcldb.Main.main(Main.java:132)

    I searched the forum at my best level without clear solution

    Concerning

    Sadik

    avorcldb add_collector - REDO SrcName orcl nom_agent - avagent01 - colltype - av Lugaopc:1521:orcl

    Specify the connection string to the Vault check server not in the source database



  • Data Guard - ORA-17627: ORA-01017: username/password invalid name

    Hello

    I have a strange behavior with a Data Guard on Linux and Oracle 11.2.0.2 environment. Since a few days, I have the following error in the database pending alertlog:

    Errors in the /u00/app/oracle/diag/rdbms/SID_site2/SID/trace/SID_pr0f_22728.trc file:

    ORA-17627: ORA-01017: name of user and password invalid. connection refused

    ORA-17629: unable to connect to the remote database server

    First of all, I rebooted apply it on the day before without any modification. So I tried to connect to the primary database to the standby with .net Oracle successfully server. He also works in the other direction.

    I also tried to copy the password from the primary server to the standby server and I restarted the transport and apply it.

    The error occurs on the day before, but the most surprising, is that the Data Guard is always fully synchronized.

    Why I get this error and what is the function of the pr0f process?

    How can I solve this problem?

    Hello

    Check the underside of a Bug in MOS, I found it with the name of the function ""krsd_get_primary_connect_string " "


    Bug 11809377 : AUTO BLOCK MEDIA RECOVERY IS CAUSING of ERRORS of PAST IN Word SLEEP PHYSICS

    It seems that you have corrupted blocks in your database pending.

    Concerning

    Hervé

  • get ORA-01017 on step 1 to configure MW

    I know that this issue has been addressed before, but there is a subtle difference.

    I work through a 11.5.10 R12 upgrade and click on this issue:
    =================
    And verify that the distance EOF_HOME is only a directory name, and not a trace...
    ERROR:
    ORA-01017: name of user and password invalid. connection refused


    SP2-0640: not connected
    SP2-0670: internal number conversion failed
    =================

    I'm on 2.18 and it comes to the race 3 attempts, the first 2 runs failed both times with questions of my own making but this step completed successfully.

    The third race through it gives this error twice, then it locks the account MW.

    I can connect to sqlplus as system and reset the account and reset once I can also connect to sqlplus as account with the original password, with what I put up MW.

    Is it possible to let the automated scripts to find out what the users MW password is again?

    Thank you

    Simon

    What is the first character of the password that you use for MW - if it is a number from 0-9, it will fail to successfully install.

    Please upload the log file mw_install_0910211411.log - your date and time stamp will be different

  • ORA-01017 encountered during execution of shell scripts

    Hello

    During execution of the backup script for one of my databases, the script contains a login section which breaks down as shown below

    Section login script:

    sqlplus / < < END > /tmp/$PROGRAM.tmp


    Error generatedf in the log file:

    SQL * more: Production release 11.2.0.3.0 on sea Apr 10 11:32:06 2013

    Copyright (c) 1982, 2011, Oracle. All rights reserved.

    ERROR:
    ORA-01017: name of user and password invalid. connection refused


    Two points to note:
    1) there are two other databases on the same server and they have no problem
    (2) I am able to connect to this database as ' / '.
    (3) I am able to connect to the database as sysdba from another server
    (4) the script runs successfully when I change like: sqlplus / as sysdba < < END > /tmp/$PROGRAM.tmp

    Hi, for the use of this you must create a user authenticated externally then it will work... Check other databases where you are using the sqlplus / connection for your refrence command

Maybe you are looking for