ORA-01153: an incompatible media recovery is active

Similar Questions

• Test system update fails on ORA-01113: file 1 needs media recovery

  I use Oracle 9.2.0.6 on HP - UX (B.11.11)
  
  I'm refreshing to a test of production on the same server system.
  
  The update fails on...
  
  ALTER DATABASE OPEN RESETLOGS;
  ORA-01113: file 1 needs media recovery
  ORA-01110: data file 1: ' / elltest/system/system_01.dbf'
  
  
  I do mainly:
  -Place prod tablespaces in backup mode
  -Copy the files from production to test directories
  -Take prod tablespaces out of backup mode
  -pass the prod (once for each newspaper group) log files
  -copy files from archive prod to test
  
  STARTUP NOMOUNT
  
  Create control file from a copy of the prod trace file
  (CREATE CONTROLFILE REUSE SET DATABASE 'ELLTEST' RESETLOGS ARCHIVELOG)
  It works
  
  RECOVER DATABASE USING BACKUP CONTROLFILE
  -J' I grab the last log archive copied during production.
  
  ALTER DATABASE OPEN RESETLOGS;
  ERROR on line 1:
  ORA-01113: file 1 needs media recovery
  ORA-01110: data file 1: ' / elltest/system/system_01.dbf'
  
  I think I have I have all required log archiving prod?
  
  Any advice?

  What you're trying to do is an incomplete recovery of the database. Since the redo logs are not used in your recovery you must explicitly specify the time to stop. If you do not process assumes a complete recovery and will require a request for reinstatement of online recovery log data that you do not.
  You can use UNDO based recovery with
  RECOVER DATABASE UNTIL CANCEL USING BACKUP CONTROL FILE;
  then type CANCEL after the last active log has been applied.
  Open with option RESETLOG database. It should work.

• Stopping the process background Media Recovery, need to resolve the issue

  Hello
  
  Nice day!
  
  O/S: HP - UX 11.31
  DB: 10.2.0.5
  
  primary database: 2xnode RAC/ASM
  database Watch: Single Instance / Unix file system
  
  Problem
  ======
  due to not having enough file system free space on the database pending node the name extension (primary database insider) Undo tablespace data file failed on the eve of the database and stop MRP.
  
  primary 2xnode RAC/ASM works well, as there is sufficient free space available in ASM - DG, but on the eve of the database MRP could not operate as cancel datafile could not be postponed because of not enough free space on the file system.
  
  
  Alert - content:
  
  ORA-01237: impossible to extend datafile 7
  ORA-01110: data file 7: ' / oracle/folder/undotbs2_01.dbf'
  ORA-19502: write error on file ' / oracle/folder/undotbs2_01.dbf ', blockno 102713 (blocksize = 8192)
  ORA-27072: IO file error
  HP-UX-ia64 Error: 11: Resource temporarily unavailable
  Additional information: 4
  Additional information: 102713
  Additional information: 456704
  Sun Aug 07 11:27:58 PST 2011
  Some of the files recovered data maybe left media fuzzy
  Media recovery can continue but open resetlogs may fail
  Sun Aug 07 11:27:58 PST 2011
  Errors in the /xxxx/bsspindb_mrp0_11342.trc file:
  ORA-01237: impossible to extend datafile 7
  ORA-01110: data file 7: ' / oracle/folder/undotbs2_01.dbf'
  ORA-19502: write error on file ' / oracle/folder/undotbs2_01.dbf ', blockno 102713 (blocksize = 8192)
  ORA-27072: IO file error
  HP-UX-ia64 Error: 11: Resource temporarily unavailable
  Additional information: 4
  Additional information: 102713
  Additional information: 456704
  Sun Aug 07 11:27:58 PST 2011
  MRP0: Stopping the process background Media Recovery (bsspindb)
  
  
  contents of the trace file:
  =============
  
  2011-08-07 11:27:32.542
  2011-08-07 11:27:32.542 64896 kcrr.c
  
  MRP0: Background Media Recovery terminated with error 1237
  ORA-01237: impossible to extend datafile 7
  ORA-01110: data file 7: ' / oracle/folder/undotbs2_01.dbf'
  ORA-19502: write error on file ' / oracle/folder/undotbs2_01.dbf ', blockno 102713 (blocksize = 8192)
  ORA-27072: IO file error
  HP-UX-ia64 Error: 11: Resource temporarily unavailable
  Additional information: 4
  Additional information: 102713
  Additional information: 456704
  -Redo read statistics for thread - 2
  Read rate (SYNC): 2651607 KB in 18054.67 s = > 0.14 Mb / s
  Physical reads total: 2651607Kb
  Longer: 14 Ko moves: 0/9426662 (0%)
  Change the movements: 1382412/14790845 (9%), moved: 503 MB
  More long LWN: 1081 KB, moves: 204/935910 (0%), moved: 5 MB
  Redo last scn: 0x0807.6e5e2a25 (8828009458213)
  ----------------------------------------------
  2011-08-07 11:27:32.557
  Fall of Media Recovery redo thread 2
  -Redo read statistics for thread - 1
  Read rate (SYNC): 2696445 KB in 18836.08 s = > 0.14 Mb / s
  Physical reads total: 2696445Kb
  Longer: 64 k, moves: 0/7997789 (0%)
  Change the movements: 1622690/11754876 (13%), moved: 701Mb
  More long LWN: 1974 KB moves: 237/591888 (0%), moved: 22 MB
  Redo last scn: 0x0807.6e5e2a03 (8828009458179)
  ----------------------------------------------
  2011-08-07 11:27:32.557
  Fall of Media Recovery redo thread 1
  2011-08-07 11:27:58.586
  The recovery is currently fatal!
  2011-08-07 11:27:58.586 1170 krsm.c
  Managed recovery: no Active posted.
  ORA-01237: impossible to extend datafile 7
  ORA-01110: data file 7: ' / oracle/folder/undotbs2_01.dbf'
  ORA-19502: write error on file ' / oracle/folder/undotbs2_01.dbf ', blockno 102713 (blocksize = 8192)
  ORA-27072: IO file error
  HP-UX-ia64 Error: 11: Resource temporarily unavailable
  Additional information: 4
  Additional information: 102713
  Additional information: 456704
  2011-08-07 11:27:58.590 64896 kcrr.c
  MRP0: Stopping the process background Media Recovery
  2011-08-07 11:27:58.590 1170 krsm.c
  ++++++++++++++++++++++++++++++++++
  
  
  No idea how fix the problem and restart the MRP process.
  
  Thank you...
  
  Kind regards
  X

  Hello

  You must add the disk to the /oracle file system. It seems that there is not enough space to extend the data file.
  After the addition of disc, you can restart the recovery with:
  ALTER DATABASE RECOVER MANAGED STANDBY BASE DISCONNECT FROM THE SESSION.

  or

  You can move your data undotbs2_01.dbf file to another file system that has enough space, that
  ALTER system set standby_file_management = manual scope = mΘmoire;
  change the database file rename ' / oracle/folder/undotbs2_01.dbf' to ' / new_fs/undotbs2_01.dbf ';
  ALTER system set standby_file_management = auto scope is mΘmoire;.

  then start the recovery.

  concerning

• Why the Media recovery is necessary once a data file is brought back to fashion online?

  Hi DBAs,

  Consider the following scenario:
  
  

  Offline data file:

  08:09:38 coredev > select status, name from v$ datafile where name like '% UNDO4% ';

  NAME OF THE STATE

  ------- ----------------------------------------------------------------------

  F:\ORACLE\ORADATA\CD\UNDO4 ONLINE. DBF

  08:09:47 coredev > alter database datafile ' F:\ORACLE\ORADATA\CD\UNDO4. DBF' offline;

  Database altered.

  08:09:58 coredev > select status, name from v$ datafile where name like '% UNDO4% ';

  NAME OF THE STATE

  ------- ----------------------------------------------------------------------

  RETRIEVE F:\ORACLE\ORADATA\CD\UNDO4. DBF

  08:10:02 coredev > select * from v$ tablespace where name = "UNDO";

  ENC FLA BIG TS # NAME INC.

  ---------- ------------------------------ --- --- --- ---

  UNDO 33 YES NO YES

  Data file online:

  08:10:53 coredev > alter database datafile ' F:\ORACLE\ORADATA\CD\UNDO4. DBF' online;

  ALTER database datafile ' F:\ORACLE\ORADATA\CD\UNDO4. DBF' online

  *

  ERROR on line 1:

  ORA-01113: file 21 needs media recovery

  ORA-01110: data file 21: ' F:\ORACLE\ORADATA\CD\UNDO4. DBF'

  08:11:04 coredev > recover datafile ' F:\ORACLE\ORADATA\CD\UNDO4. DBF';

  Complete media recovery.

  08:11:13 coredev > alter database datafile ' F:\ORACLE\ORADATA\CD\UNDO4. DBF' online;

  Database altered.

  08:11:49 coredev > select status, name from v$ datafile where name like '% UNDO4% ';

  NAME OF THE STATE

  ------- ----------------------------------------------------------------------

  F:\ORACLE\ORADATA\CD\UNDO4 ONLINE. DBF

  Now my doubt is:

  1.Pourquoi Media recovery is necessary once a data file brought to online from offline mode?

  2. why DB not open and throws the error message after brining online of offline?

  3. Why is he asking for recovery of the media?

  I'm very confused...!

  Kind regards

  Ritu

  In order to make the UNDO4 data file. Coherent DBF with other UNDO tablespace data files, when you bring it from OFFLINE to ONLINE, the changes that happened during the period offline needs to be applied to this data file hence it is requires media recovery.

  It is directed by my understanding.

• How the media recovery is possible in this case?

  Hi Experts,
  OS: Windows 2000 Server.
  DB version: 10.2.0.1
  
  BONE broke down due to power problem. I restarted the operating system and it started with questions. But in the alerts log, I found the following message appears when oracle tries to open the database.
  ERROR on line 1:
  ORA-01113: file 6 needs media recovery
  ORA-01110: data file 6:
  ' D:\ORACLE\PRODUCT\10.2.0\ORADATA\TEST\ES_PRODUCTION1. DBF'
  
  It's just a database test and no with no backup archivelog mode at all. Once again, I see this message I thought to drop the tablespace that contains 6 data file and create the new tablespace and then import it with the data, I'll have the dump of the export of this tablespace.
  
  But before you do something, for a test, I just published
  SQL > restore database;
  SQL > alter database open;
  And to my surprise she succeed to open the database on all issues and the DB works now normal.
  
  But I want to know how oracle perform media recovery when there is no backup of the BD at all with the DB in no archivelog mode.
  
  Entries of your experts are greatly appreciated.
  Thank you all...

  You have recovered the database using the redo data available in online redo log. You were lucky that you got all the necessary data for recovery within redo log.

  Kind regards
  S.K.

• C855-1VT satellite - cannot start media recovery disk

  Hello

  I have the laptop above that was dumped on its edge causing the hard drive to the jam and fail.
  This means no access to the system recovery, so I ordered arvato shop Toshibas Recovery Media recovery media.

  I installed a new HARD drive has slipped into the recovery disc and boom, no bootable media insert system disk.

  I tried the disc on other laptops, same thing, with no bootable media, but back to arvato who kindly sent me disks replacement... you guessed it... exactly the same thing so I put in my windows 7 install cd and it read the disc properly.

  Arvato said they asked toshiba to check the image which they did and found no errors, but the stock of arvato could be faulty, I thought. in any case, they offered a refund which doesn't really help.

  I may be missing something so this post hoping tosh guru of you might be able to help :)

  Thanks in advance,

  Night...

  Hello

  Maybe the image is OK, but the CD/DVD drive cannot read the disc of Arvato.
  What you could do is to copy this recovery disk to another disk using another computer.
  Then you could try to start the device using the new disc copied.
  May be worth a try.

  In addition, you can try after workaround:
  Go to BIOS and check secure boot settings and the boot mode.
  What are the settings appear in the BIOS?

  I m application because you said you could boot from Win 7 disk, in this case secure boot must be disabled and the boot mode must be set between UEFI and MSC mode.

  In case you want to install Win 8 secure boot must be enabled a UEFI should be used

• Spectrum x 360: create a media recovery using HP Support Assistant

  Hello

  I bought my laptop with Windows 8.1 is installed and I did using HP Support Assistant recovery media.

  I want to upgrade my OS to Windows 10, but I wanted to ask I'll be able to use HP Support Assistant to create

  another media recovery for Windows 10?

  Thank you

  Geffen

  There are other products that will allow you to create an image of the hard drive. Macrium, for example, has a free version that will allow you to do.

  http://www.Macrium.com/reflectfree.aspx

  In 10 of Windows, you can create a custom refresh image. the image of custom refresh allows you to copy the disk hard drive will allow the current settings and software. You will be able to use Windows Update at will when you have a question that doesn't create problems that do not allow you to boot into the operating system.

  Creating a custom in Windows 10 refresh image

  http://www.howtogeek.com/108944/how-to-create-a-custom-refresh-image-in-Windows-8/

  Creating a backup system in Windows 10 image

  http://Windows.Microsoft.com/en-us/Windows/back-up-programs-system-settings-files#1TC=Windows-7

• NTBACKUP question band restoration... "The next media required in active family is not currently online, please insert media".

  I took the backup with NTBACKUP windows & having 3 No. of LTO 4 but during the restoration, it does not recognize media 2 because of who
  not able to generate the catalog. Message 'the next media required in active family are not currently on line, Please Insert Media'.
  If anyone can help... will be really appreciated...

  Hello

  -What operating system is installed?

  I recommend you to follow the steps mentioned in this article and check if the problem persists.

  Cannot restore backup from the USB tape drive or back up to the drive if the "Check" option is enabled
  http://support.Microsoft.com/kb/328742

• The media recovery disk creation

  I failed to create a recovery disc for my new HP PC 700-327c.  The training video shows that under "All programs" the Recovery Manager or HP Support Tools & has a link with the media recovery process.  None appear in all programs.

  How can I create recovery discs or a USB Flash for this PC drive...

  I am happy that they will send you recovery disks.

  Only 2 reasons why this can happen are:

  A. a person has already made or attempted to create the recovery disks

  B. some virus or program contaminated recovery partition functions.  This is the most likely cause.

• Lock media recovery

  Hi all

  I have 145 M. type locking lock $ v.

  Select count (type), type of Group v$ lock by type

  TY COUNT (TYPE)

  ----------- --

  MR. 133

  1 RT

  1 TS

  1 XR

  In the documentation, I see

  MR

  Media recovery

  But what does really mean?

  Thank you.

  http://esemrick.blogspot.in/2006/03/media-recovery-locks.html

• QQ: What generates less recovery of activity: DROP TABLE or TRUNCATE + DROP?

  Hi guys,.
  
  QQ: What generates less recovery of activity: just DRAG the TABLE or TRUNCATE first and then drop?
  
  : p

  Easy to test, here go us.
  First case, GOUT:

  SQL> create table mytbl as select * from all_objects;
  
  Table created.
  
  SQL> select sum(a.value)
    2  from   v$mystat a, v$sysstat b
    3  where  a.statistic#=b.statistic#
    4  and    b.name = 'redo size';
  
  SUM(A.VALUE)
  ------------
        405988
  
  SQL> drop table mytbl;
  
  Table dropped.
  
  SQL> select sum(a.value)
    2  from   v$mystat a, v$sysstat b
    3  where  a.statistic#=b.statistic#
    4  and    b.name = 'redo size';
  
  SUM(A.VALUE)
  ------------
        420148
  
  SQL> select 420148-405988 from dual;
  
  420148-405988
  -------------
          14160
  

  14 160 bytes redo.
  Second case, TRUNCATE + DROP:

  SQL> create table mytbl as select * from all_objects;
  
  Table created.
  
  SQL> select sum(a.value)
    2  from   v$mystat a, v$sysstat b
    3  where  a.statistic#=b.statistic#
    4  and    b.name = 'redo size';
  
  SUM(A.VALUE)
  ------------
        647404
  
  SQL> truncate table mytbl;
  
  Table truncated.
  
  SQL> drop table mytbl;
  
  Table dropped.
  
  SQL> select sum(a.value)
    2  from   v$mystat a, v$sysstat b
    3  where  a.statistic#=b.statistic#
    4  and    b.name = 'redo size';
  
  SUM(A.VALUE)
  ------------
        710284
  
  SQL> select 710284-647404 from dual;
  
  710284-647404
  -------------
          62880
  

  Therefore, although it is much smaller than a drop of WATER + DELETE, the second approach (truncated + drop) generate about 4.5 times more than the first case (combo) again.

  Nicolas.

• headers block (block media recovery with rman)

  Hi Im following this tutorial (sound on media with rman block recovery) - im using 11 GR 2 on oel 5.5
  
  http://kamranagayev.WordPress.com/2010/03/18/RMAN-video-tutorial-series-performing-block-media-recovery-with-RMAN/
  
  I created 2 spaces and storage within an array, for example I have a table space called "users02", composed of a data file called "users02.dbf", which currently holds a table called "tbl_test01".
  
  If I query the table to select * from him, he returns the data inside, but when I use the following statement to determine the block header (for the purpose of the tutorial) no row is returned...

  select header_block from dba_segments where segmemt_name='tbl_test01';

  can someone help me on hwo I can find the header of the table,... is block - it possible that segment name is different in the name of the table?
  
  Any help would be appreciated

  806595 wrote:
  Hi Im following this tutorial (sound on media with rman block recovery) - im using 11 GR 2 on oel 5.5

  http://kamranagayev.WordPress.com/2010/03/18/RMAN-video-tutorial-series-performing-block-media-recovery-with-RMAN/

  I created 2 spaces and storage within an array, for example I have a table space called "users02", composed of a data file called "users02.dbf", which currently holds a table called "tbl_test01".

  If I query the table to select * from him, he returns the data inside, but when I use the following statement to determine the block header (for the purpose of the tutorial) no row is returned...

  select header_block from dba_segments where segmemt_name='tbl_test01';
  

  can someone help me on hwo I can find the header of the table,... is block - it possible that segment name is different in the name of the table?

  Any help would be appreciated

  PLS, try:

  select header_block from dba_segments where segment_name='TBL_TEST01';
  

• Media, recovery waiting for thread 1 sequence (in transit)

  I have rebuilt our standby database using rman double since it lacked many newspapers of archiving.
  
  After the double, the eve is now almost in sync with the primary. The Marbles that ship through, but are not implemented in a timely. How long should wait to a journal of the Archives of the primary to be applied to the waiting?
  
  I need to know this so that a good script can be configured to check the primary and standby. For the moment, that they are never exactly synchronized - sequence always one behind the primary number.
  
  Why is Eve does not have in a timely fashion?
  
  From the journal of alerts:
  
  Media, recovery waiting for thread 1 sequence 11278 (in transit)
  
  The journal seems to be "in transit" for a long time
  
  PRIMARY:
  SQL > select max (sequence #) the journal of v current_seq $;
  
  CURRENT_SEQ
  -----------
  11278
  
  
  SB:
  SQL > select MAX (SEQUENCE #), APPLIED from V$ ARCHIVED_LOG in case of APPLICATION = 'YES' GROUP APPLIED;
  
  MAX(SEQUENCE#) APP
  -------------- ---
  YES 11277
  
  
  JOURNAL ALERTS:
  RFS [2]: Archived Log: ' / backup/prod/log_1_11277_704816194.dbf'
  Primary database is in MAXIMUM PERFORMANCE mode
  Mon Nov 1 15:22:01 2010
  Recovery Media Log /backup/prod/log_1_11272_704816194.dbf
  Mon 1 Nov 15:26:49 2010
  Recovery Media Log /backup/prod/log_1_11273_704816194.dbf
  Mon Nov 1 15:29:54 2010
  Recovery Media Log /backup/prod/log_1_11274_704816194.dbf
  Mon Nov 1 15:34:18 2010
  Recovery Media Log /backup/prod/log_1_11275_704816194.dbf
  Mon Nov 1 15:36:42 2010
  Recovery Media Log /backup/prod/log_1_11276_704816194.dbf
  Mon Nov 1 15:39:43 2010
  Recovery Media Log /backup/prod/log_1_11277_704816194.dbf
  Mon Nov 1 15:42:34 2010
  Media, recovery waiting for thread 1 sequence 11278 (in transit)
  
  I should add that I understand that for the primary and standby to be interrupted by a newspaper is not a concern (they ask). It's just that I wanted a check that compare the two script and at the time where they are never equal - when I understand them to be, and that newspapers should apply almost immediately.
  
  Published by: Dan on November 1, 2010 16:36

  How long should wait to a journal of the Archives of the primary to be applied to the waiting?

  also depends on the speed of the network.
  Make sure that the archives are shipped instead of sleep.

  PRIMARY:
  SQL > select max (sequence #) the journal of v current_seq $;
  CURRENT_SEQ

  11278 (it's not connect archivelog)... :)

  SB:
  SQL > select MAX (SEQUENCE #), APPLIED from V$ ARCHIVED_LOG in case of APPLICATION = 'YES' GROUP APPLIED;
  MAX(SEQUENCE#) APP

  YES 11277

  Hi check MRP starts or not?
  database principal that you must not check the current sequence, generated check last sequence... not common sequence.

  current sequence is redo log, which has not yet been archived

  I think that everything is perfect here... no problems.

  Hope you understand, I would like to know if it is not explicit, thank you.

• How oracle will come to know weather it is recovery of Instance or Media Recovery

  How to know initially weather oracle's recovery of Instance or Media Recovery
  
  Oracle will make recovery Instance automatically, and I know that the process
  
  But how it identifies the weather it's Instance or Media Recovery recovery

  There is no recovery Instance during the START-UP phases and the MOUNT. Instance recovery is the opening time.

  Check the log of alerts of your database where you did a cover of the Instance (for example after a kill or reboot or shutdown abort) and see where appear messages of recovery of instance- after the ALTER DATABASE MOUNT is completed.

  You can STARTUP NOMOUNT with no present controlfiles.
  You can RIDE with no current data files.
  It is OPEN only which checks the data files.

  Controlfiles are never "found". They are either manually, restored or created by the DBA.

  Note: Instance recovery is called "crash recovery" in the alert.log file

  Hemant K Collette
  http://hemantoracledba.blogspot.com

  Published by: Hemant grapple on August 26, 2009 16:45

• Block Media Recovery and RMAN backup incremental level 1

  Hello
  
  I read somewhere that block Media Recovery will not work if a database is backed up with 1 incremental rman. Is this true and if so is there a work around?
  I can't find it in the documentation of oralce.
  
  Concerning
  Me

  Hello

  Yes you are right, for the recovery block media, you must have full rman backup. Incremental backups are not used by block
  media recovery. Only full backups and archived logs are used.

  See this doc on part III

  http://download-UK.Oracle.com/docs/CD/B19306_01/backup.102/b14191/TOC.htm

  concerning

  Jafar

  Published by: jerome on October 22, 2008 19:51