ORA-08103 OBJECT NO LONGER EXISTS

Hello

With the help of 11.2.0.3

Receipt message

ORA-08103 OBJECT No. LONGER EXISTS when you run a merge statement in the table that is part of the procedure.

No change in the years/grants etc and the process itself has ran subsequently as ok runs within a calendar.

View some internet topics mentioned some bugs in this area.

Would have someone seen similar before with 11.2.0.3

We checked the alert log and no message showing corruption.

Thank you

A likely cause of this error is that some DOF was done on one of the segments involved in the source query or the target table. A truncation or displacement of the table could do or an ER - build. It seems more likely, since it ran ok afterwards.

There are certainly bugs and various problems of corruption that can cause the error.

This note on MOS is a good reference: OERR: ORA-8103 "object no longer exists" master Note / troubleshooting, diagnosis and Solution (Doc ID 8103.1)

John

Tags: Database

Similar Questions

Extract with the error: object no longer exists

We use the operating system windows, oracle 11 g2. I have a lot to check out the file runs every night. It is a sql script file.
The query works in SQL Developer, but it gives an error when scheduled to run every night in a script as a file below:
REM-
whenever sqlerror exit sql.sqlcode
set the position
Set feedback off
NewPage set to none
trigger the echo
termout off Set
set verify off
Set trimspool on
break off Set
REM * linesize (logical record) MUST be large enough
set linesize 1000
set pagesize 0
rem ************************************************************************
REM create a snippet of data of the truant day for the current year.
rem ************************************************************************
coil & & 1.
SELECT "StudentID | '|' ||
"SchoolID | '|' ||
"School year" | '|' ||
"TruantAbsenceDate" | '|' ||
"CreateDate".
FROM DUAL;
SELECT TO_CHAR (s.student_number) | '|' ||
To_char (t.SCHOOLID) | '|' ||
To_char (t.Year_ID + 1990) | '|' ||
To_char(t.date_value,'MM/dd/yyyy'). '|' ||
To_char(t.date_value,'MM/DD/YYYY')--Aucun such field create_date.
OF sps_period_att1 t, s students
WHERE s.id = t.studentid
AND t.periods_unexc_absent * 2 > t.potential_periods and t.potential_periods > 0
UNION
SELECT TO_CHAR (s.student_number) | '|' ||
To_char (t.SCHOOLID) | '|' ||
To_char (t.Year_ID + 1990) | '|' ||
To_char(t.date_value,'MM/dd/yyyy'). '|' ||
To_char(t.date_value,'MM/DD/YYYY')--Aucun such field create_date.
OF sps_daily_att1 t, s students
WHERE s.id = t.studentid
AND t.daily_unexc_absent * 2 > 1;

spool off
/
output
/
The error in the .dat file is as below:
StudentID | SchoolID | School year | TruantAbsenceDate | CreateDate
AND t.daily_unexc_absent * 2 > 1
*
ERROR on line 19:
ORA-08103: object no longer exists
IT is said the object does not exist, but there is no, and I have no probem to execute in sql developer. What should I check?
Thanks in advance

The most likely cause is that the underlying table / partition is truncated and reloaded or an index is being rebuilt. What is happening in a different session than you run this query in.

Hemant K Collette

[JS] [CS5.5] - graphical layers loop error 'object no longer exists.

I'm trying to loop through a specific graphic graphic layers and set the current visibility based on the name of the layer.

Currently, the script is any mistake on the 2nd time that the loop.

I run the code and that the first graphic layer turns off then I get an error "the requested action was not successful because the object no longer exists." If I run it again the 2nd graphic layer turns off and the 3rd time in the errors of loop with the same message, etc. etc.

I have included all of the code reference but feel free to concentrate on the graphics layer (index j) loop.

Any ideas on what's going on? Thank you!

        var doc = app.activeDocument;
        var textFind = RegExp (/(text)|(type)|(title)|(legend)/i);

        //count layers
        var layerCount = doc.layers.length;
        
        //loop through layers
        for (i=0; i < layerCount; i++) {
        
            //set current layer
            var currentLayer = doc.layers[i];
            var clName = currentLayer.name;
            
            //count layer graphics
            var clGraphicCount = currentLayer.allGraphics.length;
            
            //check layer name & # of graphics
            if (clName.match (/^(temp).+/) && clGraphicCount == 2) {
                
                //set  raster instance
                var rasterInst = currentLayer.allGraphics[0];
                
                //count raster instance graphic layers
                var rasterInstGraphicLayerCount = rasterInst.graphicLayerOptions.graphicLayers.length;
                
                //check raster instace graphic layers
                if (rasterInstGraphicLayerCount > 1) {
                    
                    //loop through graphic layers
                    for (j=0; j < rasterInstGraphicLayerCount; j++) {
                        
                        //set current graphic layer
                        var riGLlayer = rasterInst.graphicLayerOptions.graphicLayers[j];
                        var riGLname = riGLlayer.name;
                        var riGLvis = riGLlayer.currentVisibility;
                        
                        //check visibility for non-text
                        if (riGLname.match (textFind)) {
                            
                            //turn off text graphic layers
                            riGLlayer.currentVisibility = false;
                            
                            };
                        
                        };
                    
                    };
                
                };
            
            };

Change a diaper invalidates all of the whole graph, so you can't rely on the value of one of your variables (cached!).

See http://indesignsecrets.com/forum/indesign-add-ons-scripts-scripting-and-plug-ins/object-la yer-options-scripts for more information.

ORA-21700: object does not exist or is marked for deletion - nested table
Hi, please see my procedure. It comes to delete records in a table whose primary keys will be given in comma separated format.

but he triggers the following error

ORA-21700: object does not exist or is marked for deletion
ORA-06512: at the 'scott '. PKG_COUNTRY', line 4598
ORA-06512: at line 10
Pr_Del_Regional_DtlORA-21700: object does not exist or is marked for deletion
Process is complete.
Disconnection from the database tfo_user-watson.

/ * In format on 12/05/2011 14:47 (trainer more v4.8.7) * /.

Varchar_table. ARRAY TYPE IS VARCHAR2 (5); -in the scope of package

PROCEDURE Pr_Del_Regional_Dtl)
pi_v_country_id IN VARCHAR2, seperateed comma for deletion
po_results ON sys_refcursor
)
IS
l_varchar_table varchar_table: = varchar_table ();
BEGIN
pr_split_varchar_values (pi_v_country_id, l_varchar_table); -divides: separation by a comma to the nested table.

DELETE FROM regional_setup
WHERE country_id IN (SELECT *)
TABLE (l_varchar_table)); -removed
EXCEPTION
WHILE OTHERS
THEN
DBMS_OUTPUT. Put_line ("Pr_Del_Regional_Dtl" |) SQLERRM);
LIFT;
END Pr_Del_Regional_Dtl;

split-
PROCEDURE pr_split_varchar_values)
pi_v_values IN VARCHAR2,
op_varchar_table ON varchar_table
)
IS
l_v_value VARCHAR2 (3000);
l_value VARCHAR2 (10);
I PLS_INTEGER: = 0;
BEGIN
op_varchar_table: = varchar_table ();
l_v_value: = pi_v_values;

IN all, LENGTH (l_v_value) > 0
LOOP
i: = i + 1;

IF INSTR (l_v_value, ",") > 0
THEN
op_varchar_table. EXTEND;
op_varchar_table (i): =.
LTRIM (RTRIM (SUBSTR (l_v_value, 0, INSTR (l_v_value, ",") - 1)));
ON THE OTHER
op_varchar_table. EXTEND;
op_varchar_table (i): = LTRIM (RTRIM (l_v_value));
l_v_value: = ";
END IF;

l_v_value: =.
SUBSTR (l_v_value, INSTR (l_v_value, ",") + 1,
LENGTH (l_v_value));
END LOOP;
END pr_split_varchar_values;

Thanks in advance
```
TYPE varchar_table IS TABLE OF VARCHAR2(5); -- in package scope
```
Have you declared in package or database? Remember, local collection cannot be used in the SQL statement.

ORA-08103 export newspaper despite the existing table
Hi all

my database is on oracle 11G.

I ran a backup of my database of production export and I met the following exception error in my log:

. . export of table TABLE_NAME_1234
EXP-00056: ORACLE error 8103
ORA-08103: object no longer exists

I logged in my database to see that this table, TABLE_NAME_1234 exists.

the error indicates that the object no longer exists...

What could be the reason?

Thank you

KK
May be at the start of the export of the table, the table has been truncated by some other session in the database.

Can you try to resume the export and return.
Anand

Published by: Anand... on October 12, 2010 11:52

Cannot delete alias if the referenced object does not exist

My JavaScript does not alias in OSX when the referenced object no longer exists. The bug occurs on a network volume when the referenced object has been deleted or moved from another system. Do you have any idea how to remove/relpace this alias dead with JavaScript? Why it is not possible to remove an alias with a missing object? Thank you for helping me!
myShortcut.remove ();

Hmm. I have no problem removing broken aliases created in the Finder, but am not able to delete the symlinks broken on remote filesystems created with ln -s (or withile.createAlias ()f). Seems to be a bug for me, as the broken symbolic link can be deleted otherwise (in the Finder or with rm ). I guess you can use doScript() and an Applescript script:
```
app.doScript('tell application "Finder" to delete POSIX file "' + myShortcut.fsName + '"', ScriptLanguage.APPLESCRIPT_LANGUAGE);
```
Slow, however. You can use a 'do shell script' Applescript with rm but the multiple levels of bids and escape are a puzzle.

Jeff

ORA-12545: Connect failed because target host or object does not exist

Hi all
I am not able to connect database remotely. I have two servers with the name U.S. and localhost. Here are my coordinates tns:
Details of the host server we:
[oracle@US admin] $ more tnsnames.ora
tnsnames.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/db_1/network/admin/tnsnames.ora
# Generated by Oracle configuration tools.
PROD =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP) (HOST = EN)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = prod. WORLD)
)
)
PROD_STBY =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = prod. WORLD)
)
)

[oracle@US admin] $ more sysconfig
Networking = yes
NETWORKING_IPV6 = yes
HOSTNAME = US.localdomain

[oracle@US admin] $ more/etc/hosts
# Do not remove the next line, or various programs
# requiring a network functionality will fail.
127.0.0.1 localhost.localdomain localhost
: US.localdomain6 1 U.S.
Remote Ping US server location:
[oracle@US admin] $ ping 192.168.188.131
PING 192.168.188.131 (192.168.188.131) 56 (84) bytes of data.
64 bytes from 192.168.188.131: icmp_seq = 1 ttl = 64 time = 0,662 ms
64 bytes from 192.168.188.131: icmp_seq = 2 ttl = 64 time = 0,558 ms
64 bytes from 192.168.188.131: icmp_seq = 3 ttl = 64 time = 0,566 ms
64 bytes from 192.168.188.131: icmp_seq = 4 ttl = 64 time = 0,603 ms
64 bytes from 192.168.188.131: icmp_seq = 5 ttl = 64 time = 0.575 ms
^ C
-192.168.188.131 - ping statistics
5 packets transmitted, 5 received, 0% packet loss, time 4002ms
RTT min/avg/max/leg = 0.558/0.592/0.662/0.048 ms
Details of the server remote localhost:
[oracle@localhost admin] $ more tnsnames.ora
PROD =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP) (HOST = EN)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = prod. WORLD)
)
)
PROD_STBY =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = prod. WORLD)
)
)

[oracle@localhost admin] $ cat/etc/hosts
# Do not remove the next line, or various programs
# requiring a network functionality will fail.
127.0.0.1 localhost.localdomain localhost
: 1 localhost6.localdomain6 localhost6

[oracle@localhost admin] $ cat sysconfig
Networking = yes
NETWORKING_IPV6 = yes
HOSTNAME = localhost.localdomain
[oracle@localhost admin] $ listener.ora more
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = prod. WORLD)
(ORACLE_HOME = u01/app/oracle/product/11.2.0/dbhome_1)
(SID_NAME = prod)
)
)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost.localdomain) (PORT = 1521))
)
(DESCRIPTION =
(ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))
)
)
ADR_BASE_LISTENER = / u01/app/oracle
[oracle@localhost admin] $ lsnrctl status

LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 4 February 2014 16:49:36
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=localhost.localdomain) (PORT = 1521)))
STATUS of the LISTENER
------------------------
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start date February 4, 2014 16:42:09
Uptime 0 days 0 h 7 min 26 sec
Draw level off
Security ON: OS Local Authentication
SNMP OFF
Parameter Listener of the /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora file
The listener log file /U01/app/Oracle/diag/tnslsnr/localhost/listener/alert/log.XML
Summary of endpoints listening...
(DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=localhost.localdomain) (PORT = 1521)))
(DESCRIPTION = (ADDRESS = (PROTOCOL = ipc) (KEY = EXTPROC1521)))
Summary of services...
Service "prod. The WORLD' has 1 instance (s).
Instance "prod", status UNKNOWN, has 1 operation for this service...
The command completed successfully
Location of ping to the server hosting remote localhost:
[oracle@localhost admin] $ ping 192.168.188.130
PING 192.168.188.130 (192.168.188.130) 56 (84) bytes of data.
64 bytes from 192.168.188.130: icmp_seq = 1 ttl = 64 time = 1.57 ms
64 bytes from 192.168.188.130: icmp_seq = 2 ttl = 64 time = 0,223 ms
64 bytes from 192.168.188.130: icmp_seq = 3 ttl = 64 time = 0,577 ms
64 bytes from 192.168.188.130: icmp_seq = 4 ttl = 64 time = 0,571 ms
64 bytes from 192.168.188.130: icmp_seq = 5 ttl = 64 time = 0,568 ms
^ C
-192.168.188.130 - ping statistics
5 packets transmitted, 5 received, 0% packet loss, time 4006ms
RTT min/avg/max/leg = 0.223/0.703/1.578/0.458 ms
Connection database target mode ensures via RMAN:
[oracle@localhost admin] $ rman target sys/oracle_4U@PROD auxiliary sys/oracle_4U@PROD_STBY

Recovery Manager: release 11.2.0.1.0 - Production on Tue Feb 4 16:56:45 2014
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-00554: initialization of the package manager internal collection failed
RMAN-04005: target database error:
ORA-12545: Connect failed because target host or object does not exist
Please let me know the cause of this error and it please help me how can I solve it.
Kind regards
Michel

OK, so you have a software firewall (IPTables) running. By default, it will not be configured to accept connections on port 1521. You have two options...

(1) disable the firewall completely. Run these commands to do this...

stop /etc/init.d/iptables

chkconfig iptables off

The first command stops the service. The second command prevents revived at every restart of the OS.

(2) add an exception to the firewall for port 1521. I'm not a Linux expert, but it should be something like this...

Change the configuration of IPTables with vi...

VI/etc/sysconfig/iptables

Add a new rule as follows...

-A of ENTRY m state - state NEW-m tcp tcp - dport 1521-j ACCEPT Pei

Save and close, and then restart the IPTables service...

/etc/init.d/iptables restart

NOTE: you must always change the name of this server to something other than "localhost".

ORA-04043: object FND_EXECUTABLES does not exist
BANNER
----------------------------------------------------------------
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
PL/SQL Release 10.2.0.4.0 - Production
CORE 10.2.0.4.0 Production
AMT for Solaris: release 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
-------------------------------------------------------------------------------------

I am getting error below...

SQL > desc FND_EXECUTABLES
ERROR:
ORA-04043: object FND_EXECUTABLES does not exist
NATHALIE wrote:
I use the sys user!

SYS is NOT the owner of each table in the comic book, including FND_EXECUTABLES.
What USER owns the FND_EXECUTABLES?

DESC DBA_DATA_FILES / ORA-04043: dba_data_files object does not exist
Hi I have Oracle 10.1.0.5; on IBM AIX. After the disk failure, I have a problem with corruption of block cancel and I am unable to use dba_data_file view.

SQL > desc dba_data_files

ERROR:

ORA-04043: dba_data_files object does not exist

SQL > desc dba_tablespaces

Name Null? Type

----------------------------------------- -------- ----------------------------

NOM_TABLESPACE NOT NULL VARCHAR2 (30)

BLOCK_SIZE NOT NULL NUMBER

NUMBER OF INITIAL_EXTENT

NUMBER OF NEXT_EXTENT

MIN_EXTENTS NOT NULL NUMBER

NUMBER OF MAX_EXTENTS

NUMBER OF PCT_INCREASE

NUMBER OF MIN_EXTLEN

STATUS VARCHAR2 (9)

CONTENT VARCHAR2 (9)

RECORD VARCHAR2 (9)

FORCE_LOGGING VARCHAR2 (3)

EXTENT_MANAGEMENT VARCHAR2 (10)

ALLOCATION_TYPE VARCHAR2 (9)

PLUGGED_IN VARCHAR2 (3)

SEGMENT_SPACE_MANAGEMENT VARCHAR2 (6)

DEF_TAB_COMPRESSION VARCHAR2 (8)

VARCHAR2 (11) RETENTION

BIGFILE VARCHAR2

What is the problem? Database is running.

Thanks in advance
Database is running.

According to metalink following note

ORA-4043 on DBA_ View (s) if they are described in a mount Statge [ID 296235.1] *.

It seems completing desc DBA_ views in the State, you have to bounce back or clear the shared pool.

For more details check the note.

ORA-23308: object OWNER_MASTER. DEPT does not exist or is not valid

Hello
in 10g R2 (10.2.0.4) I created master groups (following this article http://www.akadia.com/services/ora_replication_guide.html).
But I got the following error:

SQL> select sname, oname, type, status, gname
  2  from dba_repobject ;

SNAME                          ONAME                          TYPE
------------------------------ ------------------------------ -------------
STATUS     GNAME
---------- ------------------------------
SCOTT                          DEPT                           TABLE
VALID      REPG

SCOTT                          EMP                            TABLE
VALID      REPG

SQL> grant CREATE SNAPSHOT TO SCOTT;



SQL> grant CREATE TABLE TO SCOTT;



CONNECT repadmin/****@CEL1.WORLD

SQL> BEGIN
  2     DBMS_REPCAT.SET_COLUMNS (
  3     sname => 'owner_master',
  4     oname => 'DEPT',
  5     column_list => '"COL1","COL2","COL3","COL4"');
  6  END;
  7  /
BEGIN
*
ERROR at line 1:
ORA-23308: object OWNER_MASTER.DEPT does not exist or is invalid
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95
ORA-06512: at "SYS.DBMS_REPCAT_OBJ_UTL", line 1280
ORA-06512: at "SYS.DBMS_REPCAT_OBJ_UTL", line 1322
ORA-06512: at "SYS.DBMS_REPCAT", line 937
ORA-06512: at "SYS.DBMS_REPCAT", line 920
ORA-06512: at line 2

Thanks for the help

First, you will need to check that there is a primary key on these tables.

You may also like to take a look at the view of dba_repcatlog.

concerning

TNS-12545: Connect failed because target host or object does not exist

Hi all
I have two hosts with me. 1 host1 and 2. host2. Host1 have ORCL database. And when I'm doing the tnsping to host2 for database ORCL I get error below.
[oracle@host2 ~] $ hostname
host2.example.com
[oracle@host2 ~] $ tnsping ORCL
AMT Ping utility for Linux: Version 11.2.0.1.0 - Production on 5 April 2014 20:31:40
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Use settings files:
TNSNAMES adapter used to resolve the alias
Try to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = host1.example.com) (PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = ORCL)))
TNS-12545: Connect failed because target host or object does not exist
Here's my tns annually involves Details:
on host1:
[oracle@host1 admin] $ listener.ora more
listener.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = ORCL. WORLD)
(ORACLE_HOME = u01/app/oracle/product/11.2.0/dbhome_1)
(SID_NAME = ORCL)
)
)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = host1.example.com) (PORT = 1521))
)
)
ADR_BASE_LISTENER = / u01/app/oracle
[oracle@host1 admin] $ more tnsnames.ora
tnsnames.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/tnsnames.ora
# Generated by Oracle configuration tools.
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = host1.example.com) (PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = ORCL)
)
)
MYTEST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = host2.example.com) (PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = MYTEST)
)
)
LSNRCTL > status
Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=host1.example.com) (PORT = 1521)))
STATUS of the LISTENER
------------------------
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start date April 5, 2014 20:09:33
Uptime 0 days 0 h 25 min 1 sec
Draw level off
Security ON: OS Local Authentication
SNMP OFF
Parameter Listener of the /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora file
The listener log file /U01/app/Oracle/diag/tnslsnr/host1/listener/alert/log.XML
Summary of endpoints listening...
(DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=host1.example.com) (PORT = 1521)))
Summary of services...
Service "ORCL" has 1 instance (s).
Instance "ORCL", State LOAN, has 1 operation for this service...
Service "ORCL. The WORLD' has 1 instance (s).
Instance "ORCL", status UNKNOWN, has 1 operation for this service...
Service 'ORCLXDB' has 1 instance (s).
Instance "ORCL", State LOAN, has 1 operation for this service...
The command completed successfully
On host2:
[oracle@host2 admin] $ listener.ora more
listener.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = MYTEST. WORLD)
(ORACLE_HOME = u01/app/oracle/product/11.2.0/dbhome_1)
(SID_NAME = MYTEST)
)
)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = host2.example.com) (PORT = 1521))
)
)
ADR_BASE_LISTENER = / u01/app/oracle
[oracle@host2 admin] $ tnsname.ora more
TNSNAME.ora: no such file or directory
[oracle@host2 admin] $ more tnsnames.ora
MYTEST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = host2.example.com) (PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = MYTEST)
)
)
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = host1.example.com) (PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = ORCL)
)
)
Please help me what I do in configuring the listener and tns.
Kind regards
Michel

fb767351-A660-4b18-9a9f-73bc141f6a0c wrote:

Hi all

I have two hosts with me. 1 host1 and 2. host2. Host1 have ORCL database. And when I'm doing the tnsping to host2 for database ORCL I get error below.

[oracle@host2 ~] $ hostname

host2.example.com

[oracle@host2 ~] $ tnsping ORCL

AMT Ping utility for Linux: Version 11.2.0.1.0 - Production on 5 April 2014 20:31:40

Copyright (c) 1997, 2009, Oracle. All rights reserved.

Use settings files:

TNSNAMES adapter used to resolve the alias

Try to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = host1.example.com) (PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = ORCL)))

TNS-12545: Connect failed because target host or object does not exist

If your entry for "ORCL" tnsnames decided to 'contact' indicated info. He tried to send a ping packet to the server identified by "(HOST = host1.example.com)". " Oracle tns transmitted the request to the network stack of BONES for the resolution and routing. Here, 'host1.example.com' host name could not be resolved to an IP address, or if it was, it was an IP address that is a dead-end.

Here's my tns annually involves Details:

We see the details necessary out of your tnsping tns. Since the application never had the host (as is obvious in the error message), nothing about the questions of the listener - he never got.

on host1:

As your example tnsping host2, and says that the error message obvious host1 is nowhere to be found, like the listener, none of the files of configuration on host1 question - demand ever on host1.

[oracle@host1 admin] $ listener.ora more

listener.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora

# Generated by Oracle configuration tools.

SID_LIST_LISTENER =

(SID_LIST =

(SID_DESC =

(GLOBAL_DBNAME = ORCL. WORLD)

(ORACLE_HOME = u01/app/oracle/product/11.2.0/dbhome_1)

(SID_NAME = ORCL)

)

)

LISTENER =

(DESCRIPTION_LIST =

(DESCRIPTION =

(ADDRESS = (PROTOCOL = TCP)(HOST = host1.example.com) (PORT = 1521))

)

)

ADR_BASE_LISTENER = / u01/app/oracle

[oracle@host1 admin] $ more tnsnames.ora

tnsnames.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/tnsnames.ora

# Generated by Oracle configuration tools.

ORCL =

(DESCRIPTION =

(ADDRESS = (PROTOCOL = TCP)(HOST = host1.example.com) (PORT = 1521))

(CONNECT_DATA =

(SERVER = DEDICATED)

(SERVICE_NAME = ORCL)

)

)

MYTEST =

(DESCRIPTION =

(ADDRESS = (PROTOCOL = TCP)(HOST = host2.example.com) (PORT = 1521))

(CONNECT_DATA =

(SERVER = DEDICATED)

(SERVICE_NAME = MYTEST)

)

)

LSNRCTL > status

Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=host1.example.com) (PORT = 1521)))

STATUS of the LISTENER

------------------------

Alias LISTENER

Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production

Start date April 5, 2014 20:09:33

Uptime 0 days 0 h 25 min 1 sec

Draw level off

Security ON: OS Local Authentication

SNMP OFF

Parameter Listener of the /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora file

The listener log file /U01/app/Oracle/diag/tnslsnr/host1/listener/alert/log.XML

Summary of endpoints listening...

(DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=host1.example.com) (PORT = 1521)))

Summary of services...

Service "ORCL" has 1 instance (s).

Instance "ORCL", State LOAN, has 1 operation for this service...

Service "ORCL. The WORLD' has 1 instance (s).

Instance "ORCL", status UNKNOWN, has 1 operation for this service...

Service 'ORCLXDB' has 1 instance (s).

Instance "ORCL", State LOAN, has 1 operation for this service...

The command completed successfully

On host2:

Okay, the problem being that a client on host2 couldn't solve a connection to hos1, these could be revealing.

[oracle@host2 admin] $ listener.ora more

listener.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora

# Generated by Oracle configuration tools.

SID_LIST_LISTENER =

(SID_LIST =

(SID_DESC =

(GLOBAL_DBNAME = MYTEST. WORLD)

(ORACLE_HOME = u01/app/oracle/product/11.2.0/dbhome_1)

(SID_NAME = MYTEST)

)

)

LISTENER =

(DESCRIPTION_LIST =

(DESCRIPTION =

(ADDRESS = (PROTOCOL = TCP)(HOST = host2.example.com) (PORT = 1521))

)

)

ADR_BASE_LISTENER = / u01/app/oracle

Except that in the example, we work with, host2 is the customer, trying to reach a database on host1. Any listener on host2 is totally irrelevant.

[oracle@host2 admin] $ tnsname.ora more

TNSNAME.ora: no such file or directory

[oracle@host2 admin] $ more tnsnames.ora

MYTEST =

(DESCRIPTION =

(ADDRESS = (PROTOCOL = TCP)(HOST = host2.example.com) (PORT = 1521))

(CONNECT_DATA =

(SERVER = DEDICATED)

(SERVICE_NAME = MYTEST)

)

)

ORCL =

(DESCRIPTION =

(ADDRESS = (PROTOCOL = TCP)(HOST = host1.example.com) (PORT = 1521))

(CONNECT_DATA =

(SERVER = DEDICATED)

(SERVICE_NAME = ORCL)

)

)

It's the only tns configuration file that is important for the problem at hand. And we already knew what he said, since the output of your command of tnsping.

Please help me what I do in configuring the listener and tns.

Kind regards

Michel

Is "host1.exampl.com" the real hostname of your machine "host1"? Or you made that blur in your ad - thing quite legitimate to do this for security reasons.

Whatever, this is not really a matter of tns, unless of course 'host1.example.com' is really what you put in the tnsnames file, but your server "host1" became really something else.

Assuming that 'host1.example.com' is the correct value, debugging starts with the following:

[oracle@host2 admin] $ ping host1.example.com

[oracle@host2 admin] $ tracerout host1.example.com

Error ORA-08103. Please guide
Hello

DB version: 10.2.0.4.0

(1) I've truncated table.

(2) tried to insert into the table using DB Link (insert... Select * from table_name@db_link) and also through IMPDP. Both commands failed with ORA-08103.

(3) I renamed the table and tried to execute a create table command. Create table command also failed with ORA-08103.

(4) subsequent analysis showed that any create table command fails in the associated storage of the schema with ORA-08103.

(5) EXEC. DBMS_SPACE_ADMIN TABLESPACE_VERIFY('tablespace_name') failed with ORA-08103.

(6) DBV showed not all blocks corrupt for data files depending on storage space.

(7) I have added a new data file to the concerned storage space and re ran the IMPDP. This time around the import succeeded.

(8) I have send to add a table in the same tablespace which was previously throwing error ORA-08103.

Someone kindly you will suggest why Oracle have behaved in this way? How is it, adding a 5 GB data file tablespace concerned sentencing question? This means that the existing data files are not ok or corrupt?

All gudiance in this matter is highly appreciated.

Thanks in advance.
SID
I think you have a corruption in this table space. I prefer to create an another tablespace with new data files. Whenever you use the 'old' table space and try to write to the data file damaged, I think you will continue to get the same error.

Import error: ORA-01435: user does not exist
Hi all

I am importing a dump in the Database, the dump of old financial version 6 [EBIZ] 11g

I gave this command:

IMP FILE = EXPDUMP. DMP BUFFER = 524288000 FULL = THERE IGNORE = Y
Import a user and password given system...

Once it has started and error

+ ' MODIFY USER «INFUSE' QUOTA UNLIMITED ON «OTHERD +»
IMP-00003: ORACLE error 1918
ORA-01918: user 'INFUSE' does not exist
IMP-00017: statement failed with error ORACLE 1918:
+ "MODIFY USER «DUB_QUERY" QUOTA UNLIMITED ON «OTHERD +»
IMP-00003: ORACLE error 1918
ORA-01918: user 'DUB_QUERY' does not exist
IMP-00017: statement failed with error ORACLE 1918:
+ "MODIFY USER QUOTA UNLIMITED ON"OEM_REPOSITORY '"+" OEMV22"
IMP-00003: ORACLE error 1918
ORA-01918: user 'OEMV22' does not exist
IMP-00017: statement failed with error ORACLE 1918:
+ "MODIFY USER"W03063_ITD"QUOTA UNLIMITED ON 'TEMP' QUOTA UNLIMITED ON"OEM_R"+"
+ «EPOSITORY "«+»
IMP-00003: ORACLE error 1918
ORA-01918: user 'W03063_ITD' does not exist
+. import of objects of APPS in APPS +.
IMP-00003: ORACLE error 1435
ORA-01435: user does not exist
+. import objects of DUB_QUERY to the DUB_QUERY +.
IMP-00003: ORACLE error 1435
ORA-01435: user does not exist
+. import objects from SYSTEM to SYSTEM.
+. import APPLSYS objects in the APPLSYS. +
+ "ALTER SESSION SET CURRENT_SCHEMA ="APPLSYS"" + "
IMP-00003: ORACLE error 1435
ORA-01435: user does not exist
IMP-00000: Import terminated unsuccessfully

Kindly advice me what is evil,

I created all the data of the same files as the old database. both importing all the users will created, if its OK then why this ' * ORA-01435: user does not exist * "coming...

Concerning

Paja

Published by: hamza on July 2, 2012 04:50
I created all the data of the same files as the old database. so when importing all users will be created

In my first test I didn't create all the users before importing, just give this command all users imported without any errors.

Assuming that 'data files' mean 'spaces', are you sure that all the storage spaces have been created (including temporary)?

I did the same thing to dozens of times (not with a version so old, I must say), and I got these errors when some tablespace has not been created.

SQL error: ORA-01840: value not long enough for the format of the date of entry
It is a delete SQL in a driver of demand, which gives no error, but does remove all the lines either. I have converted the removal 'from' to ' Select * ' and may see the following error:

Select * FROM PS_GPDE_DV_TRIG40 WHERE EXISTS (SELECT FROM 'X'
PS_GPDE_DV_ELIG_MO ELG WHERE ELG. EMPLID = PS_GPDE_DV_TRIG40. EMPLID AND
ELG. EMPL_RCD = PS_GPDE_DV_TRIG40. EMPL_RCD AND TO_DATE (TO_CHAR (ELG. PRD_END_DT
"YYYY"). TO_CHAR (ELG. PRD_END_DT, "MM"). '01', "YYYY-MM-DD") =.
PS_GPDE_DV_TRIG40. GPDE_DV_EVT_EFFDT AND ELG. CAL_RUN_ID = "CAL_0812")
Error report:
SQL error: ORA-01840: value not long enough for the format of the date of entry

The interesting thing is that if I attach a condition of emplid, then the SQL above does not give an error and return lines:

Select * FROM PS_GPDE_DV_TRIG40 WHERE EXISTS (SELECT FROM 'X'
PS_GPDE_DV_ELIG_MO ELG WHERE ELG. EMPLID = PS_GPDE_DV_TRIG40. EMPLID AND
ELG. EMPL_RCD = PS_GPDE_DV_TRIG40. EMPL_RCD AND TO_DATE (TO_CHAR (ELG. PRD_END_DT
"YYYY"). TO_CHAR (ELG. PRD_END_DT, "MM"). '01', "YYYY-MM-DD") =.
PS_GPDE_DV_TRIG40. GPDE_DV_EVT_EFFDT AND ELG. CAL_RUN_ID = "FM_CG_0812")
and emplid = "1234"

now, if the number of lines is identified (by giving more number of emplids), it begins to give the error when the number of rows returned is greater than about 30. It is completely independent of what employee is used, so there is no question of data dependence.

Function optimizer cost is off and a subquery nest is off on the init.ora file

subquery UNNEST= false

optimizercost_based_transformation = off

I don't know if it has something to do with this problem.

Explanations would be welcome!

Thank you
Vikas
I think it is question of data combined with a not very sensible date format mask (it could fail when the null data, because of your concatenation with '01' and work when not null data).
Have you tried with a simple TRUNC?

Your code:
```
...TO_DATE(TO_CHAR(ELG.PRD_END_DT, 'YYYY') || TO_CHAR(ELG.PRD_END_DT , 'MM') || '01' , 'YYYY-MM-DD') =PS_GPDE_DV_TRIG40.GPDE_DV_EVT_EFFDT...
```
After change:
```
...TRUNC(ELG.PRD_END_DT , 'MM') =PS_GPDE_DV_TRIG40.GPDE_DV_EVT_EFFDT...
```
Nicolas.

I changed my email address of my ID Apple online, but my iphone still ask again me for my old email password, which no longer exists, how can I change the email to my new on my iPhone

I changed my email address of my ID Apple online, but my iphone still ask again me for my old email password, which no longer exists, how can I change the email to my new on my iPhone

Go to settings | Mail, Contacts, calendars and change e-mail account information.

T.

ORA-08103 OBJECT NO LONGER EXISTS

Similar Questions

Maybe you are looking for