Similar Questions

• ORA-12170: TNS: Connect timeout occurred on the same host as DB

  Hello

  I just installed Oracle on mu Ubuntu 12.4 following the instructions here:

  http://www.Makina-corpus.org/blog/HOWTO-install-Oracle-11g-Ubuntu-Linux-1204-precise-pangolin-64bits

  and here:

  Install Oracle 11 GR 2 on Ubuntu 12.04 of the databases

  However, when I try to log on to the database, I created during installation using sqlplus, it hangs for a minute or two until it-error:

  ORA-12170: TNS: Connect timeout occurred.

  My tnsnames.ora:

  MYSIS =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = my_host) (PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = mysids)
  )
  )

  I checked that the listener is running and listening to the post 1521:

  s$ sudo netstat - tulpn | grep 1521

  tcp6 0 0: 1521: * LISTEN 16732/tnslsnr

  $ ps - ef | grep 16732

  Oracle 16732 1 0 06:58?        00:00:00 /opt/oracle/product/11.2.0/dbhome_1/bin/tnslsnr EARPHONE-inherit

  Thoughts?

  Finally managed to do run. The problem was that I have not read rights to tnsnames.ora.

• ORA-12170 TNS: Connect timeout occurred

  Hi Experts,

  While trying to connect via TOAD, sqldevloper to my database, I get the following error: -.

  ORA-12170 TNS: Connect timeout occurred

  The listener.ora file content: -.

  [oracle@gdlogidb1 admin] $ cat listener.ora

  listener.ora # Network Configuration file: /mnt/PRDdata/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora

  # Generated by Oracle configuration tools.

  LOGDEV =

  (DESCRIPTION_LIST =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1525))

  (ADDRESS = (PROTOCOL = TCP (PORT = 1525))(HOST = gdlogidb1.tireco.com))

  )

  LOGDEV =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1525))

  (ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.2.18)(PORT = 1525))

  )

  ADR_BASE_LOGDEV = / mnt/PRDdata/oracle

  The listener status: -.

  [oracle@gdlogidb1 admin] $ lsnrctl status LOGDEV

  LSNRCTL for Linux: Version 11.2.0.2.0 - Production on August 29, 2013 03:13:15

  Copyright (c) 1991, 2010, Oracle.  All rights reserved.

  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC1525)))

  STATUS of the LISTENER

  ------------------------

  Alias LOGDEV

  Version TNSLSNR for Linux: Version 11.2.0.2.0 - Production

  Start date August 29, 2013 03:05:32

  Uptime 0 days 0 h 7 min 43 sec

  Draw level off

  Security ON: OS Local Authentication

  SNMP OFF

  Parameter Listener of the /mnt/PRDdata/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora file

  The listener log file /mnt/PRDdata/Oracle/diag/tnslsnr/gdlogidb1/logdev/alert/log.XML

  Summary of endpoints listening...

  (DESCRIPTION = (ADDRESS = (PROTOCOL = ipc) (KEY = EXTPROC1525)))

  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp (PORT = 1525))(HOST=192.168.2.18)))

  Summary of services...

  Service 'logdev.tireco.com' has 1 instance (s).

  "Logdev" instance, State LOAN, has 1 operation for this service...

  Service 'logdevXDB.tireco.com' has 1 instance (s).

  "Logdev" instance, State LOAN, has 1 operation for this service...

  The command completed successfully

  TNSping works fine too.

  [oracle@gdlogidb1 admin] $ tnsping LOGDEV

  AMT Ping utility for Linux: Version 11.2.0.2.0 - Production on August 29, 2013 03:35:14

  Copyright (c) 1997, 2010, Oracle.  All rights reserved.

  Use settings files:

  /MNT/PRDdata/Oracle/product/11.2.0/dbhome_1/network/admin/SQLNET.ora

  TNSNAMES adapter used to resolve the alias

  Try to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = gdlogidb1.tireco.com) (PORT = 1525)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = logdev.tireco.com)))

  OK (0 msec)

  I can connect it is, but the problem occurs when I try to connect using TOAD or Sqldevloper.

  [oracle@gdlogidb1 admin] $ sqlplus system@LOGDEV

  SQL * more: Production of liberation 11.2.0.2.0 Thu Aug 29 03:32:15 2013

  Copyright (c) 1982, 2010, Oracle.  All rights reserved.

  Enter the password:

  Connected to:

  Oracle Database 11 g Release 11.2.0.2.0 - 64 bit Production

  SQL > user sho

  The USER is 'SYSTEM '.

  Content of the sqlnet.ora: -.

  [oracle@gdlogidb1 admin] $ cat sqlnet.ora

  sqlnet.ora # Network Configuration file: /mnt/PRDdata/oracle/product/11.2.0/dbhome_1/network/admin/sqlnet.ora

  # Generated by Oracle configuration tools.

  NAMES. DIRECTORY_PATH = (TNSNAMES, EZCONNECT)

  ADR_BASE = / mnt/PRDdata/oracle

  My Version of operating system is:- 11.2.0.2.0

  Platform: -.

  Gdlogidb1.tireco.com 2.6.39 - 400.109.4.el6uek.x86_64 #1 SMP Linux kill Jul 22 11:44:00 CDT 2013 x86_64 x86_64 x86_64 GNU/Linux

  Hello

  The error was taken neat but thanks for the reply. The quick fix is to disable the firewall.

  First login as a superuser.

  # service iptables save
# service iptables stop
# chkconfig iptables offe

  Thank you

  Ankur

• managing the Oracle ERROR ORA-12170: TNS: Connect timeout occurred

  Hello all dear
  
  We have a server that is responsible for collecting data from some customers. In each of these devices, we have installed Oracle 11.2 g and that they are connected via DB-link. There is a stored procedure that test the connection before doing this either by running the command (+ select count (*) of dual@db_link1+). In the situations that one of the clients is not accessible, this ORA-12170 error occurred and there will be an end to MS. Now, I want to avoid this and want to sp jump this client and connect to another. I wonder if there is an exception that is raised by this fatal error and we can do it.
  
  Thank you

  >

  I wonder if there is an exception that is raised by this fatal error and we can do it.

  Thank you

  You know what is the exception: it is 12170. So can you not name and use it in a normal EXCEPTION clause? http://docs.Oracle.com/CD/E11882_01/AppDev.112/e25519/errors.htm#sthref889

• RMAN-04004: recovery catalog database error: ORA-12170: TNS: connect the ti

  Hello:
  
  Last night ' RMAN backup error: ' RMAN-04004: recovery catalog database error: ORA-12170: TNS: Connect timeout.
  
  I can sqlplus to the target database and the catalog database. The listener is in place. What is the problem? What should I check?
  
  Thanks in advance for your help.

  in the oratest/orapass@rmandb1 CATALOG,.

  rmandb1 is the name of the service. normally the name of the service and the name of db are kept same.

  check rmandb1 tnsping where you try to run ' RMAN TARGET / CATALOG oratest/orapass@rmandb1 "command.

  as optput will get the ip address of the server on which db is resident, no port, Protocol

  as

  ---------

  [Oracle@RAC3 ~] $ tnsping orcl

  AMT Ping utility for Linux: Version 10.2.0.5.0 - Production on December 23, 2011 21:12:20

  Copyright (c) 1997, 2010, Oracle. All rights reserved.

  Use settings files:
  /opt/app/Oracle/product/DB/10.2.1/network/admin/SQLNET.ora

  TNSNAMES adapter used to resolve the alias
  Try to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = rac3.rajesh.com) (PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = orcl)))
  OK (10 ms)
  -------------------------------

  Here the HOST = rac3.rajesh.com is the present db Server

  Published by: Rajesh.Rathod on December 23, 2011 07:43

• Stop the connection timeouts occur - want the page wait

  I run several tab that monitor various tools. These pages will refresh. Pages must wait each other finish before you can start.

  In version 28 it was beautiful. The page just wait indefinitely and kicked in a previous page after doing its thing.

  Now in version 29 he comes back with a message "connection timed out" after a few minutes.

  I adjusted

  Network.http.connection - timeout
  Network.http.pipelining.Read - timeout

  for values but the problem still occurs. Any thoughts on how I can find the FF28 behavior?

  Try setting the http.response.timeout parameter. In the version 28, it had not been established. Version 29, it is located at 300 (5 minutes). Should help to move on to something much larger.

  See this blog entry:

  http://morgb.blogspot.com/2014/05/Firefox-29-and-HTTP-response-timeout.html

• Error: "some errors have occurred during the processing of requested tasks". Sending emails from Outlook Express

  Original title: Repetitivet sending emails from Outlook Express

  When sending emails from my Outlook Express , the following occurs:

  (1) as usual, send the message falls into my Outbox and begins to be sent.

  (2) when the message was sent, I get a message that "some errors occurred while processing requested tasks" but no actual errors are displayed.

  (3) the sent items folder does not show that a message has been sent... but a message has been sent.

  (4) the original message remains in my Outbox and will be sent over and over again.

  As you can imagine, it's a very embarrassing problem.  All suggestions are welcome, but please keep the instructions clear and simple.

  Ed *.

  Hello

  Windows XP Service Pack 2 is installed on your computer? To work on this question, see these steps.

  It seems that there is a corruption of dbx file.

  I suggest you go over your messages out of the Inbox, and then create new folders Outbox and sent items after you move the messages you want to save to a local folder that you create.

  Reference:

  (a) click onTools

  (b) thenOptions

  (c) selectMaintenance

  (d) Record Store will reveal the location of your Outlook Express files.

  (e) Note the location and navigate on it in Explorer Windows or, copy and paste to start and select run.

  In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden.

  To view these files in Windows Explorer, you must enable Show hidden files and folders

  Reference:

  (a) clickStart

  (b) Control Panel

  (c) Folder Options icon

  (d) notice, or in Windows Explorer

  (e) Tools

  (f) the Folder Options

  ( viewof g).

  With Outlook Express closed, find the DBX files for the items in the Outbox and sent and delete them. New ones will be created automatically when you open Outlook Express.

  After you're done, followed by compacting your folders manually while working * off * and do it often.

  Reference:

  (a) clickOutlook Express at the top of the the folder tree so no folders are open.

  (b) click onthe file

  (c) work offline (or double click working online in the status bar).

  (d) file

  (e) file

  (f) compact all folders. Wait for the compaction to complete.

  General precautions for Outlook Express:

  Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend about a300 MB max for less risk of corruption.

  Information on the maximum size of the .dbx files that are used by Outlook Express:
  http://support.Microsoft.com/?kbid=903095

  Compact often as specified above.

  Reference:

  (a) in the Tools

  (b) selectOptions

  (c) maintenance:

  (d) uncheck Compact messages in the background and leave it unchecked. (N/a if running XP/SP2).

  And backup often.

  See also: error messages when you send and receive in Outlook and Outlook Express http://support.microsoft.com/kb/813514

  An Outlook Express basic repair kit

  http://support.Microsoft.com/kb/2398839

  Hope the information is useful.

• Windows Mail - "a few errors have occurred during the processing of requested tasks"

  I get a window every time I have bring to the top of the box mailbox Windows that indicates that 'the host 'YAHOO' could not be found. Check that you have entered the server name correctly - the Yahoo Acct. "Protocol: Pop3, Port: 110, secure (SSL): no, SocketError:1101, error number: Ok899CCCOD.

  There are displayed (hide) (cancel) (Review) boxes which do not appear to cause the return of this particular window to solve.   When I click on 'Review' there is another window appears which States "1 of 2 tasks are completed properly" when I click on "Hide" the window closes but will repeat whenever I visit the Windows Messaging page.  I've not been able to find an answer to this situation, although I did a lot of research to help and support without result.

  You will appreciate any useful info that can clear up this episode.

  Hello RenoMac1,

  Solution: -.
  In all likelihood, your mail server does not work. The ISP (or internal it Department) brought the server for maintenance. Perhaps the server was interrupted due to other problems, or there is a problem with the connection.

  There is really nothing you can do but wait, and keep trying. If the problem persists for a long time, you can call your ISP (or internal it Department) and find out if there is a problem. You can usually find out if it's a connection problem trying to access the World Wide Web using your browser. If you can access the Web, you can assume the connection is good, and the problem lies in the server. Some access providers offer network status reports on their Web sites. You can see the status page of the network on the Web site to see if the ISP knows the problem and is working to fix it. If this is not the case, call your provider and find out if this is a known issue. In most cases, the problem is on the side Server and not with your PC, and you have to wait for its resolution.

  --

• Customer Oracle TNS connect timeout problems

  Hi all.
  
  I tried to connect the free versions of trial and beta to Benchmark Factory by quest software on my laptop to windows 32-bit on my desk running oracle linux.
  
  With the help of people here, I checked my Oracle database allows incoming connections DB set up server with a routable IP #
  
  The application that I use on my laptop constantly gives me an error ORA-12170: TNS connect timeout...
  
  The following steps have been taken during the installation of the client software...
  
  -------------------------
  1. factory reference download and install
  2 tries to connect to the database on the server machine, but regarldess oracle which has been entered I got a windows error saying not found Oci.dll
  3. I downloaded the zip of Oracle Instant client for 32-bit windows
  4 extract the instant client download files in the bin folder of the reference plant. (this fixes the error not found oci.dll)
  5. When you are using a direct connection, I specified the following details:
  
  Username: linux system user name
  Password: my password of linux
  Host: 192.168.1.9
  Port: 1521
  SID: orcl
  connect as: sysdba
  connect using: Instant customer (it was the only option in a drop down)
  -------------------------------------------
  
  When I try to connect I get the AMT connect timeout error.
  
  Anyone has any ideas what I did wrong or not done?
  
  Any help would be appreciated
  
  Matt
  
  Published by: user9200169 on August 16, 2010 15:53
  
  Published by: user9200169 on August 16, 2010 16:00

  When everything has failed, read the Fine Documentation

  http://www.Oracle.com/technetwork/database/features/OCI/IC-FAQ-094177.html

  "How can I specify the connection in Instant Client mode strings?
  All methods NET naming Oracle does not require the use of ORACLE_HOME or TNS_ADMIN (to locate the configuration such as tnsnames.ora or sqlnet.ora files) work in Instant Client mode. In particular, the connection string can be specified in the following formats:

  A SQL Connect URL string in the form:

  Host: [port] [service name]

  such as:

  dBase-Server - 5:4321 / ORDERS

  As a pair of keyword / value Oracle Net. For example:

  "(DESCRIPTION = (ADDRESS = (PROTOCOL = tcp) (HOST = dlsun242)
  (PORT = 5521))
  (CONNECT_DATA = (SERVICE_NAME = bjava21))) »

  Naming methods that require TNS_ADMIN locate configuration files continue to work if the value of the TNS_ADMIN environment variable.

  If the TNS_ADMIN environment variable is not defined and TNSNAMES entries for example, inst1, are used, the variable ORACLE_HOME must be set, and the configuration files are supposed to be located in the directory of $ORACLE_HOME/network/admin.

  Please note that the ORACLE_HOME variable in this case is only used to locate the Oracle Net configuration files, and any other component of Client Code Library (OCI, NLS and so forth) don't use the value of ORACLE_HOME.

  The adapter unreserved or empty connection strings are not supported. However, another way to use the empty connection string must affect on UNIX TWO_TASK environment variable, or the LOCAL Windows variable, a tnsnames.ora entry or a pair of keyword / value Oracle Net. If LOCAL or TWO_TASK is set to a tnsnames.ora entry, then the tnsnames.ora file must be loaded by setting ORACLE_HOME or TNS_ADMIN.

  "Modified: 8 April 04 Ref #: ID-4428"

• ORA-12537: TNS:connection closed

  Hello
  
  Please help me solve this problem: when I try to access my testdb, I get the following error:
  
  [oracle@RedHatU5 admin] $ sqlplus adi/adi@testdb
  
  SQL * more: version 11.1.0.6.0 - Production on Mon Mar 21 13:40:28 2011
  
  Copyright (c) 1982, 2007, Oracle.  All rights reserved.
  
  ERROR:
  ORA-12537: TNS:connection closed
  
  Please find below some symptoms:
  
  I created the following files manually in $ORACLe_HOME/network/admin, as below:
  
  #sqlnet.ora #.
  
  NAMES. DIRECTORY_PATH = (TNSNAMES, EZCONNECT)
  + #SQLNET.expire_time = 0 +.
  + #TCP.validnode_checking = YES +.
  TCP.invited_nodes = (x.x.x.x)
  
  #tnsnames.ora #.
  
  brmtest =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = TCP) (Host = RedHatU5)(Port = 1521))
  )
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = testdb)
  )
  )
  
  EXTPROC_CONNECTION_DATA =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC1)))
  (CONNECT_DATA =
  (SID = TestDB)))
  
  
  Default listener works correctly:
  
  [oracle@RedHatU5 admin] $ lsnrctl status
  
  LSNRCTL for Linux: Version 11.1.0.6.0 - Production on March 21, 2011 13:26:40
  
  Copyright (c) 1991, 2007, Oracle.  All rights reserved.
  
  Connection to (ADDRESS = (PROTOCOL = tcp)(HOST=) (PORT = 1521))
  STATUS of the LISTENER
  ------------------------
  Alias LISTENER
  Version TNSLSNR for Linux: Version 11.1.0.6.0 - Production
  Beginning of March 21, 2011 12:59:07
  Uptime 0 days 0 h 27 min 33 sec
  Draw level off
  Security ON: OS Local Authentication
  SNMP OFF
  The listener log file /Orabrm/app/Oracle/diag/tnslsnr/RedHatU5/listener/alert/log.XML
  Summary of endpoints listening...
  + (Description = (Address = (Protocol = TCP)(Host=RedHatU5) (port = 1521))) +.
  + (Description = (Address = (Protocol = IPC) (Key = EXTPROC))) +.
  Summary of services...
  Service 'PLSExtProc' has 1 instance (s).
  Instance of 'PLSExtProc', status UNKNOWN, has 1 operation for this service...
  "Testdb" service has 2 occurrences.
  Instance "testdb", status UNKNOWN, has 1 operation for this service...
  Instance "testdb", State LOAN, has 1 operation for this service...
  Service 'testdbXDB' has 1 instance (s).
  Instance "testdb", State LOAN, has 1 operation for this service...
  Service 'testdb_XPT' has 1 instance (s).
  Instance "testdb", State LOAN, has 1 operation for this service...
  The command completed successfully
  
  [oracle@RedHatU5 admin] $ tnsping testdb
  
  AMT Ping utility for Linux: Version 11.1.0.6.0 - Production on March 21, 2011 13:34:09
  
  Copyright (c) 1997, 2007, Oracle.  All rights reserved.
  
  Use settings files:
  +/orabrm/app/Oracle/product/11.1.0/Db_1/network/admin/SQLNET.ora+
  
  
  TNSNAMES adapter used to resolve the alias
  Try to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP) (Host = RedHatU5)(Port = 1521))) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = testdb)))
  OK (0 msec)
  
  [oracle@RedHatU5 admin] $ sqlplus adi/adi@//RedHatU5:1521/testdb
  
  SQL * more: version 11.1.0.6.0 - Production on Mon Mar 21 13:35:49 2011
  
  Copyright (c) 1982, 2007, Oracle.  All rights reserved.
  
  ERROR:
  ORA-12537: TNS:connection closed
  
  SQL > connect adi@testdb
  Enter the password:
  ERROR:
  ORA-12537: TNS:connection closed
  
  
  
  WARNING: You are more connected to ORACLE.
  
  Please help me understand what's wrong in my setup
  
  Thank you
  Adrian
  
  Published by: user12908554 on March 21, 2011 04:56

  Refer to this note

  http://forums.Oracle.com/forums/thread.jspa?threadID=1002617

• ORA-29702: an error has occurred in the operation of Service of Cluster Group

  Hello
  
  After closing down a knot trying unsuccessfully at the start of this node:
  
  SQL > startup
  ORA-29702: an error has occurred in the operation of Service of Cluster Group
  
  I got this message.
  
  Here is a log of file: orcl2_lmon_13886.trc
  
  */Oracle/admin/ORCL/bdump/orcl2_lmon_13886.TRC*
  Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64 bit Production
  With the options of partitioning, Real Application Clusters and Data Mining
  ORACLE_HOME = / oracle/DB
  Name of the system: Linux
  Name of the node: DB2
  News Release: 2.6.18 - 53.el5
  Version: #1 SMP Wed Oct 10 16:34:19 EDT 2007
  Machine: x86_64
  Instance name: orcl2
  Redo thread mounted by this instance: 0 < none >
  Oracle process number: 5
  The Unix process PID: 13886, image: oracle@DB2 (MON)
  
  :() 2008-12-19 10:08:26.214 SERVICE NAME *.
  SESSION ID: (1102.1) 2008-12-19 10:08:26.214 *.
  21522 GHG 8 resource pool
  GHG enqueues 33158
  GES CPI: Receivers 3 shippers 3
  GES CPI: Buffers receive 1000 Send (i: 2750 b:1934) reserve 1000
  GES CPI: Msg 408 lot 8192 regular size
  Factor of batch processing: enqueue replay ack 201, 224
  Factor of batch processing: cache size 126 by 64 lock replay
  kjxggin: receive buffer size = 32768
  clsc_connect: (0x1d19a030) no listener to (ADDRESS = (PROTOCOL = ipc) (KEY = OCSSD_LL_db2_crs))
  * 2008-12-19 10:08:29.819: CSSCLNTclsssInitNative: connection failed, rc 9 *.
  kgxgncin: SATC init failed with status 3
  kjxgmin: kgxgncin failed - (2)
  kjxggin: generic group layer init fails
  2008-12-19 10:08:29.819 *.
  Stopping the queue Service global
  2008-12-19 10:08:29.820 *.
  enqueue global service detach CM:pid = 13886
  
  I did check the listener, it didn't work, but I start it:
  
  LSNRCTL > status
  Connection to (ADDRESS = (PROTOCOL = tcp)(HOST=) (PORT = 1521))
  STATUS of the LISTENER
  Alias LISTENER
  Version TNSLSNR for Linux: release 10.2.0.3.0 - Production
  Start date December 19, 2008 10:49:42
  Uptime 0 days 0 h 3 min 55 sec
  Draw level off
  Security ON: OS Local Authentication
  SNMP ON
  Parameter Listener of the /oracle/DB/network/admin/listener.ora file
  The listener log file /Oracle/DB/network/log/listener.log
  Summary of endpoints listening...
  * (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=localhost.localdomain) (PORT = 1521))) *.
  The listener supports no services
  The command completed successfully
  LSNRCTL >
  
  Could you give me a guide how to start this node? or where is a problem?

  Before the start of the database, you can, you must start the CRS.

• Error: A connection has been established with the server, but then an error occurred during the connection process.

  Hello

  I have MsSql running in the cluster environment and recently face the problem when there is a security agent installed in MsSql server, which the agent does nothing but only to capture the local database activity. The error led is as below:

  ID from step 1

  Server NIBKSQLCLUST

  Job name LSBackup_DRIB

  Newspaper log shipping backup job step name.

  Time 00:00:02

  SQL severity 0

  SQL Message ID 0

  Operator by e-mail

  Operator Net sent

  Operator paged

  Retries attempted 0

  Message

  2011-03-21 08:00:02.62 * error: could not retrieve parameters of backup for primary ID '26f46141-a676-41b2-8653-11f1b13de43a '. (Microsoft.SqlServer.Management.LogShipping) *.

  2011-03-21 08:00:02.63 * error: could not connect to the server NIBKSQLCLUST. (Microsoft.SqlServer.ConnectionInfo) *.

  2011-03-21 08:00:02.63 * error: a connection has been established with the server, but then an error occurred during the connection process. (provider: Named Pipes Provider, error: 0 - no process is on the other end of the pipe.) (.Net SqlClient data provider) *.

  2011-03-21 08:00:02.63 - END OF THE TRANSACTION LOG BACKUP-

  The process to run correctly when I turned off the security officer. Advice kindly the cause of this problem and is where all configurations should be set / changed in MsSql server.

  Thank you

  Boonlep coulibaly

  Hello

  I suggest you to send your request from the link and check.

  http://msdn.Microsoft.com/en-us/hh361695.aspx

  http://msdn.Microsoft.com/en-us/library/bb545450.aspx

• Communication error has occurred during the last request please check connection.

  I get this error, Communication error occurred during the last request please check connection.

  Request failed with the following error message:

  301 moved permanently

  Nginx

  --.

  You want to start the last request?

  Original title: Communication Error Message

• ORA-00604: an error has occurred at the SQL level 1 recursive

  Hi all
  
  I made the full database expdp and impdp Production to test the server its success but during the creation of any user or change password its me poster below error
  
  SQL > create user identified by bam bam
  2 default tablespace users
  3 tablespace temporary temp
  4 unlimited quota on users;
  create user bam identified by bam
  *
  ERROR on line 1:
  ORA-00604: an error has occurred at the SQL level 1 recursive
  ORA-06502: PL/SQL: digital or value error: character string buffer too small
  ORA-06512: at line 7
  
  
  SQL > alter user identified by 12345; system
  change the system of the user identified by 12345
  *
  ERROR on line 1:
  ORA-00604: an error has occurred at the SQL level 1 recursive
  ORA-06502: PL/SQL: digital or value error: character string buffer too small
  ORA-06512: at line 7
  
  kindly help me to solve this problem.
  
  Thank you.

  One last thing. 100% make sure error is defined as partners on the issue of Test database:

  change the system '_system_trig_enabled' = FALSE;

  And then try to create/modify the user. For example:

  SQL> create or replace
    2    trigger ORA_06502
    3      after alter
    4      on database
    5      declare
    6          v_str1 varchar2(1);
    7          v_str2 varchar2(3);
    8      begin
    9          v_str2 := 'ABC';
   10          v_str1 := v_str2;
   11  end;
   12  /
  
  Trigger created.
  
  SQL> alter user u1 identified by u1
    2  /
  alter user u1 identified by u1
  *
  ERROR at line 1:
  ORA-00604: error occurred at recursive SQL level 1
  ORA-06502: PL/SQL: numeric or value error: character string buffer too small
  ORA-06512: at line 6
  
  SQL> alter system set "_system_trig_enabled"=FALSE;
  
  System altered.
  
  SQL> alter user u1 identified by u1
    2  /
  
  User altered.
  
  SQL> 
  

  SY.

• RC-00118: an error occurred during the creation of database

  Pls I need help to successfully clone my database
  Operating system is Linux 4.0 11.5.10.2 Application and database is 9.2.0.6
  
  The question is try to clone the E-busines suit application using the Rapid clone. Am Note 230672.1
  Whenever the adcfgclone.pl on the DB layer runs up to 70% it-error with the following message, while the database is created:
  
  
  Clone of fast running with the command:
  Perl /s03/FIN/findb/9.2.0/appsutil/clone/bin/adclone.pl java=/s03/FIN/findb/9.2.0/appsutil/clone/bin/... /JRE mode = apply... component stage=/s03/FIN/findb/9.2.0/appsutil/clone/bin/ = method = dbctxtg=/s03/FIN/findb/9.2.0/appsutil/FIN_aqherp.xml contextValidated = true showProgress CUSTOM dbTier
  
  Beginning database layer apply - Thu Feb 26 14:29:24 2009
  Logfile located at /s03/FIN/findb/9.2.0/appsutil/log/FIN_aqherp/ApplyDBTier_02261429.log
  RC-50004: Fatal: error in ApplyDatabase:
  Creating control files is not
  
  ERROR when executing apply...
  
  ERROR: Cannot run /s03/FIN/findb/9.2.0/appsutil/clone/bin/adclone.pl
  [oracle@aqherp bin] $ vi /tmp/CloneContext_0226021337.log
  [oracle@aqherp bin] $ vi /s03/FIN/findb/9.2.0/appsutil/log/FIN_aqherp/ApplyDBTier_02261429.log
  ADX database utility
  ---------------------------------------------------------------
  
  getConnectionUsingAppsJDBCConnector()->
  APPS_JDBC_URL = "null".
  Try to get by using connection based SID connect descriptor
  getConnection()->
  sDbHost: aqherp
  sDbDomain: qudrah.com
  sDbPort: 1522
  sDbSid: END
  sDbUser: APPS
  Try to connect using SID...
  getConnectionUsingSID()->
  JDBC URL: jdbc:oracle:thin:@aqherp.qudrah.com:1522:FIN
  Exception occurred: java.sql.SQLException: IO exception: the network adapter could not establish the connection
  Try to connect using SID as ServiceName
  getConnectionUsingServiceName()->
  URL JDBC: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=aqherp.qudrah.com)(PORT=1522))(CONNECT_DATA=(SERVICE_NAME=FIN)))
  Exception occurred: java.sql.SQLException: IO exception: the network adapter could not establish the connection
  Try to connect using SID as ServiceName.DomainName
  getConnectionUsingServiceName()->
  URL JDBC: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=aqherp.qudrah.com)(PORT=1522))(CONNECT_DATA=(SERVICE_NAME=FIN.qudrah.com)))
  Exception occurred: java.sql.SQLException: IO exception: the network adapter could not establish the connection
  Connection could not be obtained; return null
  
  Database utility - ADX finished-
  
  RC-00118: an error occurred during the creation of database
  Asked by oracle.apps.ad.clone.ApplyDatabase
  
  
  StackTrace:
  java.lang.Exception: control file creation failed
  to oracle.apps.ad.clone.ApplyDatabase. < init > (ApplyDatabase.java:661)
  to oracle.apps.ad.clone.ApplyDatabase. < init > (ApplyDatabase.java:328)
  to oracle.apps.ad.clone.ApplyDatabase. < init > (ApplyDatabase.java:304)
  to oracle.apps.ad.clone.ApplyDBTier. < init > (ApplyDBTier.java:154)
  at sun.reflect.NativeConstructorAccessorImpl.newInstance0 (Native Method)
  at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
  at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
  at java.lang.reflect.Constructor.newInstance(Constructor.java:274)
  at oracle.apps.ad.clone.util.CloneProcessor.run(CloneProcessor.java:68)
  at java.lang.Thread.run(Thread.java:534)
  
  Thank you
  SG

  SG,

  Level application/database source nodes are you referring? If so, you can go ahead and run AutoConfig on the application tier.

  Kind regards
  Hussein