ORA-12704: incompatibility of character set

Similar Questions

• ORA-12701: CREATE DATABASE character set is not known after upgrade 11.2.0.3

  Hello Experts,
  
  Please note that I have just finished my Oracle database upgrade 11.1.0.7 to 11.2.0.3
  
  Once I tried to bounce the database, I get the following errors?
  
  
  [oracle@dba1 09181638] $ sqlplus "virtue sysdba".
  
  SQL * more: Production of the 11.2.0.3.0 version kills him Sep 18 16:44:26 2012
  
  Copyright (c) 1982, 2011, Oracle. All rights reserved.
  
  Connect to an instance is idle.
  
  SQL > startup
  ORACLE instance started.
  
  Total System Global Area 1071333376 bytes
  Bytes of size 1349732 fixed
  465569692 variable size bytes
  591396864 of database buffers bytes
  Redo buffers 13017088 bytes
  Mounted database.
  ORA-01092: ORACLE instance is complete. Disconnection forced
  ORA-12701: CREATE DATABASE character set is not known.
  Process ID: 8740
  Session ID: 201 serial number: 5
  
  Concerning
  Mohammed. Abdul Awal

  ORA_NLS environment variables (ORA_NLS32, ORA_NLS33, ORA_NLS10) explained. [77442.1 ID]

  when using a Oracle 10g or 11g version set the ORA_NLS10 environment variable to:
  
  ORA_NLS10 = $ORACLE_HOME/nls/data
  

  change

  ORA_NLS10=/u01/d01/db/tech_st/11.2.0/nls/data/9idata
  

  TO

  ORA_NLS10=/u01/d01/db/tech_st/11.2.0/nls/data
  

  as 9idata no longer exists it

  or simply disabled ORA_NLS10, as it is not necessary to define explicitly in Oracle 9i

• ORA-29275: partial multibyte character sets

  I'm trying to
  

  select name from test1@remote;

  and the hit ORA-29275: partial multibyte character sets. I also tried
  

  select CONVERT(name,'AL32UTF8','UTF8') from test1@remote;

  and
  

  select UTL_RAW.CAST_TO_RAW(name) from test1@remote;

  but still hit the same error.
  
  Help, please. My database is Oracle Database 11 g Enterprise Edition Release 11.1.0.7.0 - 64 bit Production.

  Read Metalink Note 788156.1 AL32UTF8 / UTF8 (Unicode) database Character Set Implications.

  SY.

• Incompatibility of character set

  Hello
  
  The following query (see below) throws an exception (ora-12704) when I run.
  Tables are the different schema, but the two schemas are in the same database.
  
  Any idea?
  Stephan
  
  ------------------------
  Oracle 10.2.0.1 - Linux 32 bit
  
  The query > >
  
  Select nvl (to_char (n21000.cod_mesa),'-') in the "Code."
  NVL (to_char (n21005.l_desc),'-') as 'description '.
  of n21000, n21005
  where (n21000.cod_mesa = n21005.cod_mesa
  and (n21000.dat_fin is null or n21000.dat_fin > = sysdate))
  Union of all the
  Select f21000.cod_mesa, f21005.l_desc
  of f21000, f21005
  where (f21000.cod_mesa = f21005.cod_mesa
  and (f21000.dat_fin is null or f21000.dat_fin > = sysdate))
  
  Published by: Steff972_the_one on October 15, 2009 08:04

  Hello

  What are the data types of your columns?
  Maybe you are having the same problem as described here:
  http://asktom.Oracle.com/pls/asktom/f?p=100:11:0:P11_QUESTION_ID:5783936214008 #22440482412090

  How did you this beautiful piece of 'tag - art', by the way? ;)

• Error ORA-12712 when changing the character set AL32UTF8 to nls

  Hello
  
  It is strongly advised to use the AL32UTF8 database character set when ever a database is used with our XML capabilities. The database character set in the installed base is WE8MSWIN1252. To use XML DB functionality, I need to change it to AL32UTF8. But, when I try to do that, I get ORA-12712: new character set must be a superset of the old character set. Is there a way to fix this?
  
  Thanks in advance,
  Divya.

  Hello

  a change of we8mswin1252 to al32utf8 is not directly possible. This is because al32utf is not a binary superset of we8mswin1252.

  There are 2 options:
  -use any export and import
  -Use of the altar in a kind of limited

  Depends on the method, you can choose the characters in the database, is that only ASCII then the other can work, in other cases, one is necessary.

  It is all described in Note 260192.1support, "replacing the NLS_CHARACTERSET AL32UTF8 / UTF8 (Unicode). Get on-site support/metalink.

  You can also read the chapters about it in the Guide of globalization: [url http://download.oracle.com/docs/cd/E11882_01/server.112/e10729/ch11charsetmig.htm#g1011430] change characterset.

  Herald tiomela
  http://htendam.WordPress.com

• ORA-12703: this character set conversion is not supported

  Hello
  
  STH wrong here, can someone please advice what should I do?
  
  You can see the details below,
  
  
  Thank you
  
  
  
  
  
  RMAN > RUN
  2 > {}
  3 > SET until TIME ' to_date (May 24, 2010 18:00 ',' DD-MM-YYYY HH24:MI:SS') ";
  4 > RESTORE database;
  5 > RECOVER DATABASE;
  {6 >}
  
  executing command: SET until clause
  
  From restoration to May 25, 10
  using channel ORA_DISK_1
  
  creation of data fno = 6 name file = D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_PRD_STAGING_01_
  REOR_REORG0. DBF
  creating file data fno = 14 name = D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_PRD_STAGING_02
  Comprehensive REORG0. DBF
  channel ORA_DISK_1: from datafile backupset restoration
  channel ORA_DISK_1: specifying datafile (s) to restore from backup set
  restoring datafile 00001 to D:\ORACLE\BISE1\ORADATA\BISE1DB\SYSTEM01. DBF
  restoring datafile 00002 to D:\ORACLE\BISE1\ORADATA\BISE1DB\UNDOTBS01. DBF
  restoring datafile 00003 to D:\ORACLE\BISE1\ORADATA\BISE1DB\SYSAUX01. DBF
  restoring datafile 00004 to D:\ORACLE\BISE1\ORADATA\BISE1DB\USERS01. DBF
  restoring datafile 00005 to D:\ORACLE\BISE1\ORADATA\BISE1DB\EXAMPLE01. DBF
  restoring datafile 00007 to D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_PRD_DIMENSIONS_0
  1 DBF
  restoring datafile 00008 to D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_PRD_FACTS_01_REO
  RG0_REORG0. DBF
  restoring datafile 00009 to D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_PRD_INDEXES_01.D
  BF
  restoring datafile 00011 to D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_TST_DIMENSIONS_0
  1 DBF
  restoring datafile 00012 to D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_TST_FACTS_01_REO
  RG0_REORG0. DBF
  restoring datafile 00013 at D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_TST_INDEXES_01.D
  BF
  restoring datafile 00015 to D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_TST_STAGING_01_R
  EORG0. DBF
  channel ORA_DISK_1: backup D:\TESTBI_BACKUP\32LEG5CR_1_1 piece reading
  channel ORA_DISK_1: restored the backup part 1
  piece handle = D:\TESTBI_BACKUP\32LEG5CR_1_1 tag = BACKUP_BISE1DB_000_052410030823
  channel ORA_DISK_1: restore complete, duration: 00:41:37
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of the restore command at 25/05/2010 16:32:18
  ORA-12703: this character set conversion is not supported

  Try following

  SET NLS_LANG = AMERICAN_AMERICA. AR8MSWIN1256
  NLS_DATE_FORMAT value = HH24:MI:SS: DD-MM-YYYY

  RMAN > RUN
  2 > {}
  3 > SET until TIME ' to_date (May 24, 2010 18:00 ',' DD-MM-YYYY HH24:MI:SS') ";
  4 > RESTORE DATABASE;
  5 > RECOVER DATABASE;
  {6 >}

  for example:

  C:\Documents and Settings\Administrateur > SET NLS_LANG = AMERICAN_AMERICA. AR8MSWIN12
  56

  C:\Documents and Settings\Administrateur > value NLS_DATE_FORMAT = HH24:MI:S DD-MM-YYYY
  S

  C:\Documents and Settings\Administrateur > rman target /.

  Recovery Manager: Release 10.2.0.1.0 - Production on Tue may 25 20:30:51 2010

  Copyright (c) 1982, 2005, Oracle. All rights reserved.

  connected to target database: T (DBID = 608834747)

  RMAN > run
  2 > {}
  3 > SET until TIME ' to_date (May 25, 2010 20:29 ',' DD-MM-YYYY HH24:MI:SS') ";
  4 > RESTORE DATABASE;
  5 > RECOVER DATABASE;
  {6 >}

  executing command: SET until clause
  using the control file of the target instead of recovery catalog database

  From restoration to 2010-05-25 20:32:33
  allocated channel: ORA_DISK_1
  channel ORA_DISK_1: sid = 159 devtype = DISK

  channel ORA_DISK_1: from datafile backupset restoration
  channel ORA_DISK_1: specifying datafile (s) to restore from backup set
  restoring datafile 00001 to D:\ORACLE\PRODUCT\10.2.0\ORADATA\T\SYSTEM01. DBF
  restoring datafile 00002 to D:\ORACLE\PRODUCT\10.2.0\ORADATA\T\UNDOTBS01. DBF
  restoring datafile 00003 to D:\ORACLE\PRODUCT\10.2.0\ORADATA\T\SYSAUX01. DBF
  restoring datafile 00004 to D:\ORACLE\PRODUCT\10.2.0\ORADATA\T\USERS01. DBF
  channel ORA_DISK_1: backup D:\ORACLE\PRODUCT\10.2.0\FLASH_REC piece reading
  OVERY_AREA\T\BACKUPSET\2010_05_25\O1_MF_NNNDF_TAG20100525T202245_5ZQTT62X_. BKP
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of the restore command at 2010-05-25 20:32:37
  ORA-19870: error reading backup total D:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AR
  EA\T\BACKUPSET\2010_05_25\O1_MF_NNNDF_TAG20100525T202245_5ZQTT62X_. BKP
  ORA-19573: failed to get exclusive enqueue for datafile 1

  RMAN > shutdown immediate;

  database closed
  dismounted database
  Instance Oracle to close

  RMAN > startup mount;

  connected to the database target (not started)
  Oracle instance started
  mounted database

  Total System Global Area 125829120 bytes

  Bytes of size 1247660 fixed
  67110484 variable size bytes
  54525952 of database buffers bytes
  Redo buffers 2945024 bytes

  RMAN > run
  2 > {}
  3 > SET until TIME ' to_date (May 25, 2010 20:29 ',' DD-MM-YYYY HH24:MI:SS') ";
  4 > RESTORE DATABASE;
  5 > RECOVER DATABASE;
  {6 >}

  executing command: SET until clause

  From restoration to 25/05/2010 20:34:25
  allocated channel: ORA_DISK_1
  channel ORA_DISK_1: sid = 156 devtype = DISK

  channel ORA_DISK_1: from datafile backupset restoration
  channel ORA_DISK_1: specifying datafile (s) to restore from backup set
  restoring datafile 00001 to D:\ORACLE\PRODUCT\10.2.0\ORADATA\T\SYSTEM01. DBF
  restoring datafile 00002 to D:\ORACLE\PRODUCT\10.2.0\ORADATA\T\UNDOTBS01. DBF
  restoring datafile 00003 to D:\ORACLE\PRODUCT\10.2.0\ORADATA\T\SYSAUX01. DBF
  restoring datafile 00004 to D:\ORACLE\PRODUCT\10.2.0\ORADATA\T\USERS01. DBF
  channel ORA_DISK_1: backup D:\ORACLE\PRODUCT\10.2.0\FLASH_REC piece reading
  OVERY_AREA\T\BACKUPSET\2010_05_25\O1_MF_NNNDF_TAG20100525T202245_5ZQTT62X_. BKP
  channel ORA_DISK_1: restored the backup part 1
  room handle=D:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\T\BACKUPSET\2010_05_25
  \O1_MF_NNNDF_TAG20100525T202245_5ZQTT62X_. Tag BKP = TAG20100525T202245
  channel ORA_DISK_1: restore complete, duration: 00:00:35
  Restoration finished in 2010-05-25 20:35:03

  Starting recover at 2010-05-25 20:35:03
  using channel ORA_DISK_1

  starting media recovery

  archive log thread 1 sequence 3 is already on the disk that the file D:\ORACLE\PRODUCT\10.
  2.0\FLASH_RECOVERY_AREA\T\ARCHIVELOG\2010_05_25\O1_MF_1_3_5ZQTYVPY_. ARC
  archive log thread 1 sequence 4 is already on the disk that the file D:\ORACLE\PRODUCT\10.
  2.0\FLASH_RECOVERY_AREA\T\ARCHIVELOG\2010_05_25\O1_MF_1_4_5ZQTZC1Y_. ARC
  archive log thread 1 sequence 5 is already on the disk that the file D:\ORACLE\PRODUCT\10.
  2.0\FLASH_RECOVERY_AREA\T\ARCHIVELOG\2010_05_25\O1_MF_1_5_5ZQV6SRW_. ARC
  archive log filename=D:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\T\ARCHIVELOG\2
  010_05_25\O1_MF_1_3_5ZQTYVPY_. Wire ARC = 1 = 3 sequence
  archive log filename=D:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\T\ARCHIVELOG\2
  010_05_25\O1_MF_1_4_5ZQTZC1Y_. Wire ARC = 1 sequence = 4
  media recovery complete, duration: 00:00:02
  Finished recover at 2010-05-25 20:35:07

  RMAN > alter database open resetlogs;

  open database

  RMAN >

  Published by: admin on May 25, 2010 08:37

• How to change the character set in an XML field

  Hello everyone.

  I have a table with an XML field, the table must be copied into a new, when I run:

  Insert into new_table

  Select * from ancienne_table;

  Delivery to the following error message:

  SQL error: ORA-64464: XML error event

  ORA-19202: there was an error in the treatment

  LSX-00234: decimals not valid "4,225714285714286."

  XML

  00000 64464. -"Error event XML.

  Can someone help me please, I need to convert the characters in "UTF8" that would solve the problem.

  Thank you very much

  Carlos

  SQL error: ORA-64464: XML error event

  ORA-19202: there was an error in the treatment

  LSX-00234: invalid decimal "4,225714285714286."

  XML

  00000 64464. -"Error event XML.

  Can someone help me please, I need to convert the characters in "UTF8" that would solve the problem.

  It seems that you have an XMLType column based on a pattern of failure revalidation.

  It's strange, but fortunately, the error has nothing to do with the database character set.

  Just change your NLS session parameters:

  ALTER session set nls_numeric_characters = ".";

  and try again.

• The character set issues

  I am facing an error when inserting value into a char (1) field. It can have values such as 'A', 'R' or 'P '. When I pass values of front-end application, oracle raises an error: "" ora-12899: value too large for the column "»

  I read some threads and changed to Char (1 byte) to Char (1 Char), but still it throws the same error. When I change Char (1 byte) to Char (2 bytes), it works! but stores the ASCII value IE 65 per 'A' how can I fix this problem?

  Here are the details of the DB

  NLS_NCHAR_CHARACTERSET	AL16UTF16
  NLS_RDBMS_VERSION	11.2.0.3.0
  NLS_CHARACTERSET	AR8MSWIN1256

  Thank you

  Kind regards

  Try 'string value' instead of 'char Value. I want to verify that the issue is not caused by a problem with the binding of char type c#.

  In addition, the opinion of Barend: 'the character set of the database must match the code page of the operating system. Your code page should therefore 1256. "is false. It may be, for example, AL32UTF8. It can actually be any character set that supports the character generating a request. In the case of a .net application which is Unicode by design, AL32UTF8 is the recommended database charset. AR8MSWIN1256 is very good as long as you enter characters from 1256 Arabic code page.

  Thank you

  Sergiusz

• build the new database through scripts must understand Spanish character sets.

  Hello gurus,
  I need to some simple tips, a good chance for some quick points for you.
  I've never built a database to understand any different other than the U.S. English character set. I now have to build a database that will be used for characters Spanish-keyboards, etc. But I will use English to install 11g software. I just want to be able to show the Spanish characters in the data for the names of clients.
  I will create the database with scripts that I did to make the standard model for data files, control files, etc..
  Then I import in a dump that I did and that was done with American English character sets.
  The system is 11g (11.2.0.3.0) on Linux Enterprise Server 5.8.
  I thought I'd use the AL32UTF8 character set, but I'm not sure where to use them.
  My original test showed no Spanish characters for names of customers as the "tilda" or "sueano" (excuse my spelling). But in this case I did the exceptional for Spanish, I used only the construction of standard American English (no change in the file init.ora or original database create script).
  
  How can I adjust my settings file for the initial creation of the database model to be able to understand the Spanish character set and still be able to import my dump error-free file.
  
  EXAMPLE of a build script:
  
  CREATE DATABASE mynewdb
  The USER SYS IDENTIFIED BY sys_password
  The USER IDENTIFIED BY system_password SYSTEM
  LOGFILE GROUP 1 ('/ u01/app/oracle/oradata/mynewdb/redo01.log') SIZE in the 100M.
  GROUP 2 ('/ u01/app/oracle/oradata/mynewdb/redo02.log') SIZE in the 100M.
  GROUP 3 ('/ u01/app/oracle/oradata/mynewdb/redo03.log') SIZE 100 M
  MAXLOGFILES 5
  MAXLOGMEMBERS 5
  MAXLOGHISTORY 1
  MAXDATAFILES 100
  CHARACTER SET US7ASCII
  NATIONAL CHARACTER SET AL16UTF16
  
  If I replace to AL32UTF8 AL16UTF16 NATIONAL CHARACTER SET, will it work to show the Spanish characters?
  
  Sorry for the long-winded question, any advice will be great.
  
  Fortunately,
  Shawn

  Hello
  the national character sets is for the column as nvarchar types not for normal varchar data types. So if your dump file contains column types, you also need to set. The character set is for normal column as a varchar types. The use of unicode is best practice if you use the multiel language, but keep in mind that multibyte character set can be a problem when importing because varchar2 (10) means byte 10 and not 10 characters, so mistakes as an identifier for a long time may occur when importing.
  You can create the database.

  See this documentation:
  http://docs.Oracle.com/CD/B28359_01/server.111/b28298/ch2charset.htm

  You can use a like WE8MSWIN1252 character set which covers the Spanish also (like many, I know) and a superset of us7ascii

  concerning
  Peter

• VARCHAR2: 8 k limit when you use a multibyte character set

  Hi people,
  Apex 3.1.2 on 10.2.0.4 RAC on linux; the character set standard for my organization is AL32UTF8.
  The apex database contains all non-US7ASCII character.
  
  In a part of the URL, I just came from a package XML strings that are concatenated and passed as a parameter to Anychart.swf. Once my concatenated string exceeds 8 k I get "ORA-06502: PL/SQL: digital error or value." This is because on a UTF8 database are reserved to 4 bytes for each character; whether coded on several bytes, or not - and the varchar2 (32767) is exhausted.
  
  It is a severe limitation as the XML table can easily exceed 8 k.
  
  What choices do I have?
  -If I change my database in US7ASCII he works my limit for the concatenation in a region with a real 32,767 characters? Better, but still limited.
  -are there functions to force a single byte per character conversion - I don't think so, but just in case where...
  -would spend using CLOB? I'm worried it might slow down processing low-response time is one of the main motivations for going to the whole problem in the first place.
  
  My code looks like this:
  
  DECLARE
  Xml1 VARCHAR2 (4000);
  xml2 VARCHAR2 (4000);
  XML3 VARCHAR2 (4000);
  xml4 VARCHAR2 (4000);
  str1 VARCHAR2 (32767).
  
  pkg_chart. Gen_Chart_Xml5
  (p_chart = >...)
  , p_Location = >...
  , p_timescale = >...
  , p_Day = >...
  , p_RETURN1 = > xml1
  , p_RETURN2 = > xml2
  , p_RETURN3 = > xml3
  , p_RETURN4 = > xml4
  );
  str1: = xml1. xml2 | XML3 | xml4;
  
  .. .and later
  var Chart1 = new AnyChart();
  Chart1.SetData ("' | str1 |) ''');
  Chart1.write ("chartDiv-1");
  
  Right now my code fails in concatenation in str1 if the total length is more than about 8 k.
  I've seen different messages about CLOB handling in the apex and it seems to be fraught with problems too: so I was wondering if anyone has any advice on how to best proceed. or could you show me an example to do something like this using CLOB instead.
  
  Thank you very much!
  Mark
  
  Published by: Mark Teehan on October 12, 2009 02:22

  Hello

  I was about to hit you up an example when I spotted a recent blog post of someone I know called Morten Jensen.

  His blog is here [http://theworldofjensenmo.blogspot.com/] and here is the relevant quote...

  >
  He must be a procedure which will be "buffer printing" CLOB. The procedure to come htp.prn with the PL/SQL Web Toolkit in the Oracle database allow up to 8192 characters to print at a time, which is too few in my case. So this function below will share a CLOB up to 256 character fragments and htp.prn them one at a time.

  create or replace PROCEDURE HTP_BUF_PRN
  (p_text IN CLOB
  ) AS
  l_buflen INTEGER: = 256;
  BEGIN

  FOR i FROM 0... Floor (length (p_text) / l_buflen) LOOP
  -HTP. PRN will not accept lines up to 8192 characters - that's why this function is required
  HTP. PRN (substr (p_text, i * l_buflen + 1, l_buflen));
  END LOOP;

  -htp.prn (substr (p_text, LENGTH (p_text) - (LENGTH (p_text) mod l_buflen), LENGTH (p_text) mod l_buflen));

  END HTP_BUF_PRN;
  >

  He hit me with that feeling of "why didn't I think that!

  I hope this helps.

  See you soon

  Ben

• Changing database character set

  Hi master,
  
  I use oracle database XE on windows XP platform. This is just a test database. I need to import a schema into the database of the XE. but the problem is the character set conversion.
  
  According to the oracle documentation, I tried to change the character set, but it is not worked.it says that ORA-12712: new character set must be a superset of the old character set. It is said
  
  Export file created by EXPORT: V10.02.01 by conventional means
  CAUTION: objects have been exported by < user >, not by you
  import in WE8MSWIN1252 and AL16UTF16 NCHAR character set
  import server uses the AL32UTF8 (possible character set conversion) character set
  
  I have the same import NCHAR character set was made, but when I try to change the character above error is generated.
  
  When I tried to change the character set it gives the above error.
  
  What should I do?
  
  Thanks and greetings
  VD

  Vikrant dixit says:
  Hi master,

  I use oracle database XE on windows XP platform. This is just a test database. I need to import a schema into the database of the XE. but the problem is the character set conversion.

  According to the oracle documentation, I tried to change the character set, but it is not worked.it says that ORA-12712: new character set must be a superset of the old character set. It is said

  Please provide the details, how you tried to change the character set database and what character set.

  As indicated in MetaLink Note 260192.1 ("Changing WE8ISO8859P1 / WE8ISO8859P15 or WE8MSWIN1252 (AL32) UTF8'"), AL32UTF8 is not a binary superset of these character sets and therefore conversion includes import/export steps in case you have non-US7ASCII character data in your database.

  The MetaLink note explains how to make the change in detail, but I do not know if it is supported for 10g XE.

  If you can afford it, the easiest way is probably to create/install a new database 10g XE by using the Unicode character database, I think that option when installing 10 g XE.

  Kind regards
  Randolf

  Oracle related blog stuff:
  http://Oracle-Randolf.blogspot.com/

  SQLTools ++ for Oracle (Open source Oracle GUI for Windows):
  http://www.sqltools-plusplus.org:7676 /.
  http://sourceforge.NET/projects/SQLT-pp/

• Data loss while placing the dump in the database character set al32utf8

  Dear all,
  At the present time our application with data in the database to the character set TH8TISASCII so we are able to visualize the THAI language. Now, we got a new requirement in that, "we must support bothTHAI & CHINESE languages.
  so, we created the new instance and db with character set AL32UTF8. IAM lose some data (which has the THAI characters) and get the following error message during the import of discharge in the new database character set AL32UTF8.
  
  Error Msg: IMP-00019: rejected due to the ORACLE 12899 error line
  IMP-00003: ORACLE error 12899
  ORA-12899: value too large for column 'ESUPPLYUAT '. "" "" ORGP_ITEMS '. "" SHORT_NAME' (population: 36, maximum: 25).
  Is there any character set other than AL32UTF8 that supports Chinese and Thai languages?
  Otherwise it is any otherway to import data in the database with character set AL32UTF8 without losing data?
  
  
  Please provide the solution for this problem.
  
  Thank you
  Shakur
  
  Published by: user618734 on October 14, 2008 11:06

  You can first create the table (using lines of script or creating imp table = n), expand the column, and then import the data with ignored errors (imp ignore = y)

• Sometimes, the Firefox doesn't recognize a character set

  Firefox can not decode some English text characters or symbols and instead of characters appear a kind of codes. Just like you would surf the Chinese website without the Chinese character set.

  Like this here

  Why is it so in Firefox? I've never seen what happens in Internet Explorer.

  Pages that use Unicode (UTF-8) format display a small box with the hex code if the character cannot be displayed.
  Which allows you to search the character in a table.

  If you see such a box with hexadecimal code in it, then it means that Firefox cannot map a character to a specific font, and you will need to install a font that covers the affected characters.

  In your case you are missing fonts and font support if it occurs on sites that use the IDEOGRAM.
  
  You will see something similar on Windows XP if you visit pages that use complex scripts (e.g. hindi and Arabic).
  
  Windows XP account very basic language support installed by default.
  
  There are many languages in the world and there are still languages that may require special fonts.
  
  You probably can't read, so it's your choice if you want to install a font for these pages or just accept the small squares with the hex code.

  See http://en.wikipedia.org/wiki/Supplementary_Multilingual_Plane

  • http://en.Wikipedia.org/wiki/Help:Multilingual_support_ % 28East_Asian % 29 Wiki: Help: support multilingual (East Asia)
  • http://en.Wikipedia.org/wiki/Help:Multilingual_support_ % 28Indic % 29 Wiki: Help: support multilingual (C.i.)

• Character set for the words

  Hello

  Does anyone know what charset LPX uses for the words when you export a project at noon?

  I have set in Hungarian language of OS X. The correct character set for the Hungarians should be ISO-8859-2 (Latin 2), yet when I export a logical project that uses these words at noon, the external drive is not displayed correctly the

  That is to say. o is displayed as Ăł or similar, any set of characters I use in other software

  P. S.

  I submitted a bug report, as this seems to be a bug, but there was no reaction yet on the report

  PS.

  Never mind, I just realized the character encoding used is UTF-8

• Character set OCR

  Greetings,

  I am very new to machine vision, I am creating a number plate recognition system, I trained each character set in the license plate in the formation of OCR and when im opening each individual character image, sound successfully converts it to a string, but to an entire image (of the plate) its does not (I'm '?') I tried using KING for selection of specific areas but does not work... I don't know what seems to be the problem please help.

  You must connect the region of interest to the vi IMAQ OCR read text 3.

  The following example shows how to use the screw of OCR:

  C:\Program NIUninstaller Instruments\LabVIEW\examples\Vision\2. Functions\OCR\OCR first Example.llb\OCR first Example.vi.

  With this example, you can even load your character set file and try on your images.

  I hope this helps.

  Best regards

  Christophe