ORA-16086: standby database does not available? Help me
Hi allI use logic ensures db,.
my database is very well that there is an error: ORA-16086: does not log pending available files, standby database contain
It's log_archive_dest_2 on the primary database: log_archive_dest_2 = "service = LGWR SYNC dgora SAY valid_for =(online_logfiles,primary_role) db_unique_name = dgora'"
even then, oder data still are transported from primary eve db db and then applied on the eve of the database.
I run the command: select group #, the journal of v status $; -> the result is normal.
can someone help with this problem?
I thank you,
They are a bit like the pads to do it again.
It will speed up to apply, rocking and tilting.
Standby Redo Logs are similar to online redo logs and the difference between the two is that standby Redo Log is used to store restore data by progress coming from another (primary) database.
Standby redo logs are used only when the database_role is in sleep mode, it is recommended to add in the primary also so that they can be used on the evolution of the role, however, in the normal course work standby redo logs will be used at all on the primary.
Using groups of waiting for redo log depends on the rate of generation of redo, you can see only 2 newspapers roll forward pending use even if you have 4 groups of waiting for redo log, when the production of roll forward rate is lower.
It is recommended to have a group of newspapers of recovery sleep when redo production rates are high and all of the current log roll forward pending use.
Best regards
mseberg
Add correct you issue?
Published by: mseberg on July 20, 2011 08:17
Tags: Database
Similar Questions
-
ORA-38500 standby database physical not started
hiiii,
When I executed the command to the physical server to the standby database.
It gives the error:
To start real-time applies:
SQL > ALTER DATABASE RECOVER MANAGED STANDBY DATABASE
2 > USING the file LOG CURRENT;
Error on line 1:
ORA: 38500 using current logfile option not available without support.
Please help me how can I start physics of the standby database
Concerning
Vaibhav DixitVaibhav Dixit says:
and now what to do to start holding the databaseWhat do you meen under there? Standby DB to apply newspapers in the State Assembly, is not open.
Or you need to activate? -
ORA-16797: database does not use a server parameter file
I can see newspapers apply pending data. But in the dataguard alter journal generates error ORA-16797: database does not use a server parameter file
Error message in the logfile dataguard
-----------------------------------
DG 2010-03-23-17: 0 2 714415739 MICHAEL 46:45: GET_DRC finished
DG 2010-03-23-17: 714415740 3 1000000 MICHAEL 46:45: GET_SITE: success. (len = 464)
DG 2010-03-23-17: 714415740 3 1000000 MICHAEL 46:45: GET_SITE finished
DG 2010-03-23-17: 2000000 3 714415741 MICHAEL 46:45: GET_SITE: success. (len = 481)
DG 2010-03-23-17: 2000000 3 714415741 MICHAEL 46:45: GET_SITE finished
DG 2010-03-23-17: 0 2 714415742 MICHAEL 46:45: CTL_GET_STATUS sent to the ANZPRD site for treatment
DG 2010-03-23-17: 0 2 714415742 MICHAEL 46:45: CTL_GET_STATUS finished
DG 2010-03-23-17: 47:32 0 2 0 RSM0: HEALTH CHECK ERROR: ORA-16797: database does not use a server parameter file
DG 2010-03-23-17: 47:32 0 2 704706097 CTL_GET_STATUS operation cancelled during phase 1, error = ORA-16797
DG 2010-03-23-17: 47:32 0 2 704706097 CTL_GET_STATUS operation cancelled during phase 1, error = ORA-16797
QL > SELECT MAX(SEQUENCE#), THREAD # V$ ARCHIVED_LOG GROUP THREAD #;
MAX(SEQUENCE#) THREAD #.
-------------- ----------
2, 2000
2060 1
I did the steps
Create spfile pfie
Shutdown
Started by spifile
No luck. Journal of applied began. but I see the same error in the datagurd log fileHere's what it should look like:
SQL> show parameter pfile NAME_COL_PLUS_SHOW_PARAM TYPE -------------------------------------------------------------------------------- ------ VALUE_COL_PLUS_SHOW_PARAM --------------------------------------------------------------------------------------- spfile string C:\ORACLE\PRODUCT\11.1.0\DB_1\DATABASE\SPFILEORABASE.ORA SQL>
My guess is that the file is not in the right place. Check the location and your ORACLE_HOME environment variable.
It should be in $ORACLE_HOME/database for windows, $ORACLE_HOME/dbs for real operating systems.
-
ORA-00959: tablespace 'EXAMPLE' does not exist
Hi all,
I'm not a DBA, and I'm very basic level with oracle database technology. I want to study to get OCA "SQL Fundametals I" certification.
For this reason I downloaded the "pre built' virtualbox machine with oracle database 11g r2 installed, but I have not found the EXAMPLE of HR and OE schema that is used as a case study for the certification.
Googling on the internet I found that it is possible manually install the schema example.
In the $ORACLE_HOME/demo/schema, I found the mkplug.sql. Run this file with sqlplus I insert the 11 request parameters but the High Representative, OE, and another example of schema are not correctly create.
The error I get in the log file is: ORA-00959: tablespace "EXAMPLE" does not exist.
Please, can someone help me on what are the exact steps to do before running the mkplug.sql file?
Research on the internet I found that the solution is the following: either we create tablespace EXAMPLE in the target database, or we use the datapump REMAP_TABLESPACE option to redirect objects to a different tablespace.
But I don't know about do. Please, can anyone tell me not away in all simply elsewhere what I need to do?
Thanks in advance.
ndiquez backup file of the database ENTRY for the EXAMPLE tablespace as parameter 9:
Enter the value 9: example01.dfb (not full path)
Of course, that won't work.
Why wait for work if you provide the wrong file name and path?
I ask you SPECIFICALLY what the name was, and what extension was
/ DBCA/templates /' | ' example01. DFB', done);
That was probably the wrong post. Most of the default extensions are "DBF", not "DFB".
Your data file EXAMPLE01 exist? What extension does?
You said that the extension is "DFB" and I ask you to double check that. That's what you say.
Yes, there are the data EXAMPLE01 file. It is located at the address: u01/app/oracle/product/11.2.0/orcl/assistants/dbca/templates. Its extension is .dfb (EXAMPLE01.dfb).
You have CONFIRMED that the extension is "DFB" and NOT of DBF.
You MUST USE THE CORRECT ACCESS path, name of FILE AND the EXTENSION.
You have confirmed that the file ' is located at the address: u01/app/oracle/product/11.2.0/orcl/assistants/dbca/template'. But while you did NOT provide this path in the prompt.
If a file is named A, and you must provide a name of B would you expect to work?
If the file is located in the directory X 123 and you provide directory P789 would you expect to work?
As I said earlier the IMP (import) statement will take a file source and COPY to the destination location, add the metadata of the database.
She did this so that you ALWAYS have the original source file to use again if you want to a different database.
You must follow the instructions of the example and provide the NAME AND path to FULL ACCESS to all files.
-
ORA - 12514:TNS:listener does not work
Hi all
My Version of DB: 10.2.0
Operating system: Solaris
I just stop the database and when try to restart Pb it gives me error like:
ORA - 12514:TNS:listener does not work
When I check the entry from the file tnsnames.ora DB is in the list
but when I do
lsnrctl status
It will not display no services of db which is orcl
can someone help meVikas Kohli wrote:
DB is now
one more thing to ask
Please do not put more than one topic or 'thing' in each thread that is start a new separate discussion thread / topic / problem etc.
When you try to raise the hot backup rman I get below error:
RMAN topics, please use the dedicated forum: {forum: id = 74}.
-
ORA-12505 TNS Listener does not currently in SID
Hello
When I try to connect to Oracle Sql developer, error "ORA-12505 TNS Listener does not currently of SID given in connect descriptor". ""
I use 11 GR 1 material on Windows XPSP2 platform. But several sql works very well.
Thank you
Published by: user12222356 on April 11, 2010 07:20user12222356 wrote:
This time the Sql developer is connected successfully. But there is not a question of being happy because what happens frequently. Sometimes is connected while sometimes the connection refused... All, it seems, is that SQL Developer connection to the Oracle server depends on luck.
Is there any solution to get rid of this problem?It's a matter of timing.
First thing that should be launched is the listener. Who should be started on boot. For a laptop or another machine which uses the DHCP protocol, the listener must be configured to talk to the loopback adapter.
Then the database should be started to talk to listening on the port of sight to the listener - it is applied either with the "LOCAL_LISTENER" database being left to null (for the default listener on 1521). This can be checked by "Lsnrctl status" showing the instance of database such as saved and available.
Then the SQLDeveloper can start up, pointing to the same host, port, and service/instance, as shown in "lsnrctl status".
-
ERROR - ORA-12514: TNS:listener does not know now of immediate service
Hi all
Is the problem that I do face when I access oracle 10g database.it was wrking fine a few days back then I installed the developer 10g suite.after I am facing the problem (ERROR - ORA-12514: TNS:listener does not know currently of service requested in connect descriptor) every time I try and access my database.any 10 g help will be very appreciated.
Thanks in advance
MouradHello
Make sure that you use right tnsnames.ora as you have it installled oracle developer suite after installation of the database so it could change your ORACLE_HOME as a result of developer. You have 2 choices
1. replace oracle_home installation of oracle database in the variables env control panel system
or
1 copy the tnsnames.ora, listener.ora under Developer suite... location/networ/admin.If you are using on your local computer, you do not have this and you should be able to connect but if you use it is not bad either.
Output from the following command post
lsnrctl status
Concerning
-
I get this error when you try to create a data store for Oracle database of the Disqualification.
ORA-12505, TNS: Listener does not currently of SID in the connection descriptor (code: 2 011)
I am able to connect to this database by using the same credentials through SQL, but the Disqualification, I'm not. Do I need to do anything in linux server before the implementation of Oracle data warehouses?
Thank you
Ravi
There are a number of ways.
1 use a JNDI connection configured in WebLogic and select by name
2. use the LDAP connection or TNS - see http://docs.oracle.com/middleware/1213/edq/DQEXT/config_dbase.htm#DQEXT202
3. Add an oracle.xml file in [local disqualification home] / dbconnectors with the following content. This will allow you to select the service name in the standard Oracle data store wizard:
Class = "com.datanomic.utils.databasespecies.species.Oracle"
MaxNameLength = "30" invalidnamechars ="" ' >
{JDBC:Oracle:Thin:@${service = "srv"? /': "} ${host}: ${port} {service ="srv"? '/' : ':'}${sid} Oracle {JDBC:Oracle:Thin:@${service = "srv"? /': "} ${host}: ${port} {service ="srv"? '/' : ':'}${sid} ${superior (schema = "? user: schema)} dbproductname ~ = '(?i) oracle' name ~ = ' $BIN\\ [A-Za-z0-9 + /] {22, 24} ==------$\\p {digit} +' user = ${user}
password = ${password}
FetchSize = 100
BatchSize = ${export.batchsize}
void = TRUNCATE TABLE %s
ALTER SESSION SET CURRENT_SCHEMA = ${schema} 1521 -
WHEN I SPEAR IMPDP I GET AN ERROR ABOUT "THE TABLESPACE DOES NOT EXIST.
THIS space of STORAGE IS in FACT is MORE PRESENT on THE SYSTEM, BUT IT IS DEFINED IN the User1 SCRIPT
IS there ANYWAY THAT I CAN ASK HIM don't GET THIS TEMP TABLESPACE
or
is there anyway I can remove the definition of the user (User1) NSN_2
OR
should I just re-create the NSN_2 tablescape
HELP NEEDED PLS...
DROP USER CASCADE USER1;
CREATE THE USER1 USER
IDENTIFIED BY < password >
NSN_1 DEFAULT TABLESPACE
TEMPORARY TEMP TABLESPACE
-2 Tablespace quotas for User1
ALTER USER USER1 QUOTA UNLIMITED ON NSN_1;
ALTER USER USER1 QUOTA UNLIMITED ON NSN_2; -point in contention
Directory of Impdp User1/password = dump_dir dumpfile = logfile = LOG.log remap_schema user2.dmp = USER2:USER1 remap_tablespace = NSN_4:NSN_1
Table main "USER1". "' SYS_IMPORT_FULL_01 ' properly load/unloaded
Departure "USER1". "' SYS_IMPORT_FULL_01 ': User1 / * directory = dump_dir = setup_02102012.dmp = logfile dumpfile tries .log remap_schema = remap_tablespace of installation: USER1 = NSN_4:NSN_1
Processing object type SCHEMA_EXPORT/USER
ORA-31684: USER object Type: 'USER1' already exists
Processing object type SCHEMA_EXPORT/SYSTEM_GRANT
Processing object type SCHEMA_EXPORT/ROLE_GRANT
Processing object type SCHEMA_EXPORT/DEFAULT_ROLE
Processing object type SCHEMA_EXPORT/TABLESPACE_QUOTA
ORA-39083: Type as tablespace_quota cannot be created with the object error:
ORA-00959: tablespace "NSN_2" does not exist
Because sql is:
REPORT THE NUMBER OF TEMP_COUNT; SQLSTR VARCHAR2 (200); BÉGIN SQLSTR: = ' ALTER USER 'USER1' QUOTA UNLIMITED ON 'NSN_2 '; RUN IMMEDIATELY SQLSTR; EXCEPTION, THEN THAN OTHERS SO IF SQLCODE =-30041 THEN SQLSTR: = ' SELECT COUNT (*) OF USER_TABLESPACES WHERE NOM_TABLESPACE = "NSN_2" AND CONTENT = "TEMPORARY"'; RUN IMMEDIATELY SQLSTR IN TEMP_CO
Processing object type SCHEMA_EXPORT/PRE_SCHEMA/PROCACT_SCHEMA
Object type SCHEMA_EXPORT/SEQUENCE/SEQUENCE of treatment
Object type SCHEMA_EXPORT/TABLE/TABLE processing
ORA-39083: TABLE object type: "USER1". "" AVAIL_BY_OPTION_REF "impossible to create with the error:
ORA-00959: tablespace "NSN_2" does not exist
Impdp transform = segment_attributes
Smit
-
ORA-04043: object FND_EXECUTABLES does not exist
BANNER
----------------------------------------------------------------
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
PL/SQL Release 10.2.0.4.0 - Production
CORE 10.2.0.4.0 Production
AMT for Solaris: release 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
-------------------------------------------------------------------------------------
I am getting error below...
SQL > desc FND_EXECUTABLES
ERROR:
ORA-04043: object FND_EXECUTABLES does not existNATHALIE wrote:
I use the sys user!SYS is NOT the owner of each table in the comic book, including FND_EXECUTABLES.
What USER owns the FND_EXECUTABLES? -
FDPSTP failed due to the ORA-02149: specified partition does not exist
EBS R12.1.3
Database 11.2.0.2
Error message
**Starts**23-JUL-2012 16:49:21 ORACLE error 2149 in FDPSTP Cause: FDPSTP failed due to ORA-02149: Specified partition does not exist ORA-06512: at "SYSTEM.AD_DDL", line 165 ORA-06512: at "APPS.MSC_MANAGE_PLAN_PARTITIONS", line 371 ORA-14074: partition bound must collate higher than th +---------------------------------------------------------------------------+ Start of log messages from FND_FILE +---------------------------------------------------------------------------+ j := 1 table := MSC_ATP_SUMMARY_SO partition_name : ATP_SUMMARY_SO__1 l_count := 1 Partition for instance 1 already exists table := MSC_ATP_SUMMARY_SD partition_name : ATP_SUMMARY_SD__1 l_count := 1 Partition for instance 1 already exists l_share_partition := N plan count := 0 After Create Partitions +---------------------------------------------------------------------------+ End of log messages from FND_FILE +---------------------------------------------------------------------------+
901629 wrote:
EBS R12.1.3
Database 11.2.0.2
Error message**Starts**23-JUL-2012 16:49:21 ORACLE error 2149 in FDPSTP Cause: FDPSTP failed due to ORA-02149: Specified partition does not exist ORA-06512: at "SYSTEM.AD_DDL", line 165 ORA-06512: at "APPS.MSC_MANAGE_PLAN_PARTITIONS", line 371 ORA-14074: partition bound must collate higher than th +---------------------------------------------------------------------------+ Start of log messages from FND_FILE +---------------------------------------------------------------------------+ j := 1 table := MSC_ATP_SUMMARY_SO partition_name : ATP_SUMMARY_SO__1 l_count := 1 Partition for instance 1 already exists table := MSC_ATP_SUMMARY_SD partition_name : ATP_SUMMARY_SD__1 l_count := 1 Partition for instance 1 already exists l_share_partition := N plan count := 0 After Create Partitions +---------------------------------------------------------------------------+ End of log messages from FND_FILE +---------------------------------------------------------------------------+
How do you get this error?
Please see (INSTALLER ALERT - setting the APS scores upward and Instance of Collections of data in R12 [552415.1 ID]).
Thank you
Hussein -
ORA-14313: value 'Limit' does not exist in the partition DATASET_OTHER
Hi friends,
OS: Linux
Database Version: 10.2.0.2.0
I wanted to add a partition to one of my partitioned table "mapping". Then when I tried to reverse the partitionwith the command below... I got the error ora-14313 code.
Command Used: ALTER TABLE MAPPING SPLIT PARTITION dataset_other VALUES ('CAP') INTO (PARTITION dataset_CAP TABLESPACE TBS_MAPPING_CAP, PARTITION dataset_other);
Please suggest what to do and what is the reason for this? coz of some other partition spilit command executed successfully.Error : ALTER TABLE MAPPING SPLIT PARTITION dataset_other VALUES ('CAP') INTO (PARTITION dataset_CAP TABLESPACE TBS_MAPPING_CAP, PARTITION dataset_other) * ORA-14313: Value 'CAP' does not exist in partition DATASET_OTHERERROR at line 1:
Concerning
UmeshUmesh Gupta wrote:
Here are a few recent records in table
select table_name,partition_name,tablespace_name,high_value,partition_position from USER_TAB_PARTITIONS order by partition_position TABLE_NAME PARTITION_NAME TABLESPACE_NAME HIGH_VALUE PARTITION_POSITION MAPPING DATASET_NAP TBS_MAPPING_NAP 'NAP' 379 MAPPING DATASET_MAP TBS_MAPPING_MAP 'MAP' 380 MAPPING DATASET_SAP TBS_MAPPING_SAP 'SAP' 381 MAPPING DATASET_OTHER TBS_MAPPING DEFAULT 382
Have you checked other values of 378 score very carefully. (Normally) you get the error message means that the value exists somewhere else already.
You could also point out the high_value_length, just in case where the high_value isn't really what it looks like (e.g. some backspaces hide certain content).Concerning
Jonathan Lewis
http://jonathanlewis.WordPress.com
Author: core Oracle -
ORA-01918: user 'APDBA' does not exist
Hello, I have the following statement
The problem is that the APDBA user exists in the database and I get the error ORA-01918: user 'APDBA' does not existCREATE OR REPLACE FUNCTION APDBA.MUNIN_TBS_PCTUSED1 ( tablespace IN VARCHAR2 ) RETURN NUMBER AS A NUMBER; BEGIN SELECT round(100*(sum(bytes)/1024/1024)/(sum(maxbytes)/1024/1024),1) INTO A FROM dba_data_files WHERE tablespace_name = tablespace; RETURN A; END MUNIN_TBS_PCTUSED1; /
Thank you very muchHello again,
As said, there are a few false given ORA-01918-related bugs.
Your version seems to fit these, but you did not provide enough information to give the exact answer suffer you from one of them.There is no point in us trying to solve this problem, you must open a SR with Oracle.
Concerning
Peter -
Hi I have Oracle 10.1.0.5; on IBM AIX. After the disk failure, I have a problem with corruption of block cancel and I am unable to use dba_data_file view.
SQL > desc dba_data_files
ERROR:
ORA-04043: dba_data_files object does not exist
SQL > desc dba_tablespaces
Name Null? Type
----------------------------------------- -------- ----------------------------
NOM_TABLESPACE NOT NULL VARCHAR2 (30)
BLOCK_SIZE NOT NULL NUMBER
NUMBER OF INITIAL_EXTENT
NUMBER OF NEXT_EXTENT
MIN_EXTENTS NOT NULL NUMBER
NUMBER OF MAX_EXTENTS
NUMBER OF PCT_INCREASE
NUMBER OF MIN_EXTLEN
STATUS VARCHAR2 (9)
CONTENT VARCHAR2 (9)
RECORD VARCHAR2 (9)
FORCE_LOGGING VARCHAR2 (3)
EXTENT_MANAGEMENT VARCHAR2 (10)
ALLOCATION_TYPE VARCHAR2 (9)
PLUGGED_IN VARCHAR2 (3)
SEGMENT_SPACE_MANAGEMENT VARCHAR2 (6)
DEF_TAB_COMPRESSION VARCHAR2 (8)
VARCHAR2 (11) RETENTION
BIGFILE VARCHAR2
What is the problem? Database is running.
Thanks in advanceDatabase is running.
According to metalink following note
ORA-4043 on DBA_ View (s) if they are described in a mount Statge [ID 296235.1] *.
It seems completing desc DBA_ views in the State, you have to bounce back or clear the shared pool.
For more details check the note.
-
ORA-39083, ORA-00959: tablespace "TEST_LIVE" does not exist
Hello
I'm trying to import using impdp but I am experiencing at the below mentioned error...
Connected to: Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
With partitioning, OLAP, Data Mining and Real Application Testing options
Table main "TEST_230511." "' SYS_IMPORT_FULL_01 ' properly load/unloaded
Start "TEST_230511". ' SYS_IMPORT_FULL_01 ': TEST_230511/***@GEMSDB REMAP_SCHEMA = RΘPERTOIRE TEST_220511:test_230511 = dump_dict = test_live_230511.DMP test_230511.LOG = LOGFILE DUMPFILE.
Processing object type SCHEMA_EXPORT/USER
ORA-31684: USER object Type: 'TEST_230511' already exists
Processing object type SCHEMA_EXPORT/SYSTEM_GRANT
Processing object type SCHEMA_EXPORT/ROLE_GRANT
Processing object type SCHEMA_EXPORT/DEFAULT_ROLE
Processing object type SCHEMA_EXPORT/PRE_SCHEMA/PROCACT_SCHEMA
Processing object type SCHEMA_EXPORT/DB_LINK
Object type SCHEMA_EXPORT/SEQUENCE/SEQUENCE of treatment
Object type SCHEMA_EXPORT/TABLE/TABLE processing
ORA-39083: object of type THAT TABLE could not create with the error:
ORA-00959: tablespace "TEST_LIVE" does not exist
Because sql is:
CREATE TABLE 'TEST_230511 '. "" C_EXPENSECLAIMS_EMPLOYEE "("C_EXPENSECLAIMS_EMPLOYEE_ID"NUMBER (10.0),"AD_CLIENT_ID"NUMBER (10.0), NUMBER (10,0)"AD_ORG_ID","ISACTIVE"CHAR (1),"CREATED"DATE,"CREATEDBY"NUMBER (10.0), DATE 'DAY', 'UPDATEDBY" NUMBER (10.0), 'TRANSACTION_DATE"DATE, DATE 'EXPENSE_DATE', NUMBER (10.0) 'EXPENSE_TYPE_ID', 'BUDGET' CHAR (1) DEFAULT ('N'), THE NUMBER OF 'AMOUNT')
ORA-39083: object of type THAT TABLE could not create with the error:
ORA-00959: tablespace "TEST_LIVE" does not existORA-00959: tablespace "TEST_LIVE" does not exist
Oracle has clearly tell you, need tablespace whose name is TEST_LIVE on the target database was created after that you can try import again.
Maybe you are looking for
-
Firefox opens the file:// instead of application links
I put Windows explorer.exe to open links file://, such as records. On the contrary, Firefox opens in a tab. How can I force to be opened by the external application?
-
I go to the beta version download page and all I can find is a link to download 3.6.8. Why make such a mystery download?
-
Firefox, update 3.6.4 suspended pause win 7 as administrator
I have the same problem at http://support.mozilla.com/en-US/forum/1/629710?s=firefox+3.6.4+update+stuck+on+paused & as = s except that it refers to 3.6.4 and I'm on Win 7 as administrator. I have been configured to be notified of updates, has been no
-
Procedure recommended to new battery
What is the recommended procedure to load a new battery for the first time?
-
WiFi, tries to connect but do not. No error. Work on other machines
Yes I saw this sticky. 1 5 PCs stopped connecting to the WiFi router. He had worked for a while. The SSID is listed as "automatic". Click on connect and it runs for minutes before stopping without error message. Nothing is displayed in the event view