ERROR - ORA-12514: TNS:listener does not know now of immediate service
Hi allIs the problem that I do face when I access oracle 10g database.it was wrking fine a few days back then I installed the developer 10g suite.after I am facing the problem (ERROR - ORA-12514: TNS:listener does not know currently of service requested in connect descriptor) every time I try and access my database.any 10 g help will be very appreciated.
Thanks in advance
Mourad
Hello
Make sure that you use right tnsnames.ora as you have it installled oracle developer suite after installation of the database so it could change your ORACLE_HOME as a result of developer. You have 2 choices
1. replace oracle_home installation of oracle database in the variables env control panel system
or
1 copy the tnsnames.ora, listener.ora under Developer suite... location/networ/admin.
If you are using on your local computer, you do not have this and you should be able to connect but if you use it is not bad either.
Output from the following command post
lsnrctl status
Concerning
Tags: Database
Similar Questions
-
ORA - 12514:TNS:listener does not work
Hi all
My Version of DB: 10.2.0
Operating system: Solaris
I just stop the database and when try to restart Pb it gives me error like:
ORA - 12514:TNS:listener does not work
When I check the entry from the file tnsnames.ora DB is in the list
but when I do
lsnrctl status
It will not display no services of db which is orcl
can someone help meVikas Kohli wrote:
DB is now
one more thing to ask
Please do not put more than one topic or 'thing' in each thread that is start a new separate discussion thread / topic / problem etc.
When you try to raise the hot backup rman I get below error:
RMAN topics, please use the dedicated forum: {forum: id = 74}.
-
ORA-12514 TNS: Listener does not currently of service required
Hi all
I created a thread here only three days ago on the question above:
ORA-12514 TNS: Listener does not currently of service required
and I ended install oracle again this time around just after 2 days I'm getting the same problem again. I have not yet published that any same file not open it not even anywhere near her. Can anyone tell me the reason?
Thank you and best regards,
Lucky aka Lastw0nd3r
Published by: lastw0nd3r on August 5, 2010 07:24SQL NET should now work for you.*
If so, please mark as ANSWERbut where was I wrong?
the database is not started so the listener did not know the DB Service
-
ERROR: ORA-12514: TNS:listener is not currently of service required
My database in GNU / Linux, I by default SID like ORCL, and I created 3 other occurrences of DB (TST1, FS2 and TST3). As long as my system has not been retired, I'm Basel connect to instances. Once straightened out my system I'm unable to connect to the new DB instances... Adivice pl... Thank you...
In sqlplus: name of username/password @ ORCL - works fine...
name of user/password @TST1 or of other services... .i am getting... error... ERROR: ORA-12514: TNS:listener is not currently of service required
I created all the DB instances using below command:
DBCA-silent - createDatabase-templateName - General_Purpose.dbc - gdbname TST1-sid TST1 responsefile - NO_VALUE - characterSet AL32UTF8 - memoryPercentage 40 - emConfiguration LOCAL
Published by: user10980939 on July 20, 2011 14:16Salvation;
Post your TNSNAMES.ora entery please
Respect of
HELIOS -
Hi all... I am a newbie with oracle database.,.
I have the problem of monitoring:
I installed Oracle Database 11 g R2 XE on my CentOS 6.5 guest operating system.
I changed the host name in my CentOS so (where installed oracle 11g R2 XE) after the installation was completed successfully.
Installation-) before and during the hostname is localhost.
(-) After the installation, I changed the host name in VMCentOS
From the moment where I changed the host name, nothing starts automatically. In particular, the listener and the database instance does not start automatically.
When I start the listener manually and I try to connect to the instance of database with SQLPLUS I get this error:
ORA-12514: TNS:listener is not currently of service requested in connect descriptor
I think that the problem is due host name changed because I have to test and debug the object, re-installed a machine virtual operating system CentOS, re-installed oracle database 11 g and I do not have this problem. The database instance and the listener starts automatically!
Can someone tell me if, maybe, the problem is with the host has changed? ... and why?
P.S.: After changing the hostname I also modified the listener.ora and the tnsnames.ora by changing the HOST with the correct host name.
Hello
It seems that you don't install Oracle Database Express Edition (XE). If you post this question in the wrong forum.
When you install EA or there is no script that starts the database at startup.
If you wish, you can create by yourself. For example search for instructions to Google how to create script.
Kind regards
Jari
-
ORA-12514: TNS: Listener does not currently of service co
I get the following error message when I connect to the database box I avoid the error without the downtime of the database in the standard edition909258 wrote:
I have a small doubt listener.log and listener.ora both are the same or differentThey are different files for different purposes.
Listener.ora is NOT necessary
oracle@bcm-laptop:~$ lsnrctl status LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 04-FEB-2012 20:07:05 Copyright (c) 1991, 2009, Oracle. All rights reserved. Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521))) STATUS of the LISTENER ------------------------ Alias LISTENER Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production Start Date 04-FEB-2012 20:06:17 Uptime 0 days 0 hr. 0 min. 48 sec Trace Level off Security ON: Local OS Authentication SNMP OFF Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora Listener Log File /u01/app/oracle/diag/tnslsnr/bcm-laptop/listener/alert/log.xml
-
ORA-12505: TNS:listener does not know of SID given in connect currently of
I know, I know there are tons of info about this error on the net. BUT. I tried to figure out all day, please help :(
We are on Oracle 10.2.0.4, Solaris 5.10
1 Tnsnames.ora on the Solaris box where Oracle is installed is as follows:
2 Listener.ora is as follows:flexprd1 = (DESCRIPTION = (SDU = 4096) (TDU = 4096) (ADDRESS = (PROTOCOL = TCP)(Host = PRODX)(Port = 1523)) (CONNECT_DATA = (SID = flexprd1) ) )
3 Tnsnames.ora on the application (Win 2000) Server uses DNS names and is as follows:LISTFLEX = (ADDRESS_LIST = (ADDRESS= (PROTOCOL= TCP)(Host=PRODX)(Port= 1523)(QUEUESIZE=200)) ) SID_LIST_LISTFLEX = (SID_LIST = (SID_DESC = (GLOBAL_DBNAME= FLEXPRD) (ORACLE_HOME= /app/oracle/OraHome1) (SDU = 4096) (TDU = 4096) (SID_NAME = flexprd1) ) )
5. I can't telnet from the application server to the zone of solaris on port 1523 (so it isn't a problem of port)flexprd1 = (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = PRODY)(PORT = 1523)) ) (CONNECT_DATA = (SERVICE_NAME = flexprd1) ) )
6. I can't flexprd1 tnsping from servers of application and solars as follows:
7. services and the status of the listener seem ok:Used TNSNAMES adapter to resolve the alias Attempting to contact (DESCRIPTION = (SDU = 4096) (TDU = 4096) (ADDRESS = (PROTOCOL = TCP)(Host = PRODX)(Port = 1523)) (CONNECT_DATA = (SID = flexprd1))) OK (40 msec)
SERVICESlsnrctl status listflex LSNRCTL for Solaris: Version 10.2.0.4.0 - Production on 24-MAY-2010 16:05:23 Copyright (c) 1991, 2007, Oracle. All rights reserved. Connecting to (ADDRESS=(PROTOCOL=TCP)(Host=PRODX)(Port=1523)(QUEUESIZE=200)) STATUS of the LISTENER ------------------------ Alias LISTFLEX Version TNSLSNR for Solaris: Version 10.2.0.4.0 - Production Start Date 21-MAY-2010 15:34:20 Uptime 3 days 0 hr. 31 min. 3 sec Trace Level dev Security ON: Password or Local OS Authentication SNMP OFF Listener Parameter File /app/oracle/OraHome1/network/admin/listener.ora Listener Log File /app/oracle/OraHome1/network/log/listflex.log Listener Trace File /app/oracle/OraHome1/network/trace/listflex.trc Listening Endpoints Summary... (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=PRODX)(PORT=1523))) Services Summary... Service "FLEXPRD" has 1 instance(s). Instance "flexprd1", status UNKNOWN, has 1 handler(s) for this service... The command completed successfully
8 NETSTAT:LSNRCTL for Solaris: Version 10.2.0.4.0 - Production on 24-MAY-2010 16:05:51 Copyright (c) 1991, 2007, Oracle. All rights reserved. Connecting to (ADDRESS=(PROTOCOL=TCP)(Host=PRODX)(Port=1523)(QUEUESIZE=200)) Services Summary... Service "FLEXPRD" has 1 instance(s). Instance "flexprd1", status UNKNOWN, has 1 handler(s) for this service... Handler(s): "DEDICATED" established:0 refused:0 LOCAL SERVER The command completed successfully
9 SQLNET. ORA on the application server which I'm getting ORA-12505 is as follows:netstat -a | grep 1523 *.1523 *.* 0 0 49152 0 LISTEN dbfarmprd2.es.gwu.edu.45492 PRODX.1523 49354 0 49152 0 TIME_WAIT
10. when I try to use SQL * more from the application server, I get ORA-12505. I'm sure it's something very stupid, but I can't. Any input would be much appreciated! Thank you!SQLNET.AUTHENTICATION_SERVICES= (NTS) NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
post the last lines of 40-60 of /app/oracle/OraHome1/network/log/listflex.log
-
ORA-12514: TNS:listener is not currently of service required in the cunt
Hi Experts,
I have installed Oracle RAC in the slot environment. But unable to connect ASM instance using the string tns
This is production DB up and running.
RAC 2 nodes
Oracle RAC 11.2.0.1.0
ASM
Enterprise Linux Server version 5.5 (Carthage)
X 64 processor type
64-bit operating system
Getting error below when connecting with the instance asm directly:
Entries of listening port on node 1[oracle@ admin]$ sqlplus sys@asm as sysasm SQL*Plus: Release 11.2.0.1.0 Production on Sun Aug 5 11:16:11 2012 Copyright (c) 1982, 2009, Oracle. All rights reserved. Enter password: ERROR: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor Enter user-name:
[oracle@ admin]$ cat listener.ora LISTENER_SCAN2=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_SCAN2)))) # line added by Agent LISTENER_SCAN3=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_SCAN3)))) # line added by Agent LISTENER_SCAN1=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_SCAN1)))) # line added by Agent LISTENER=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER)))) # line added by Agent ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER=ON # line added by Agent ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_SCAN1=ON # line added by Agent ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_SCAN3=ON # line added by Agent ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_SCAN2=ON # line added by Agent SID_LIST_LISTENER = (SID_LIST = (SID_DESC = (SID_NAME = +ASM1) (GLOBAL_DBNAME=ASM) (ORACLE_HOME = /u01/app/11.2.0/grid) ) (SID_DESC = (SID_NAME = PLSExtProc) (ORACLE_HOME = /u01/app/11.2.0/grid) (PROGRAM = extproc) ) ) [oracle@ admin]$
Tnsnames.ora entries are as below:$ lsnrctl services LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 12-AUG-2012 00:31:04 Copyright (c) 1991, 2009, Oracle. All rights reserved. Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521)) Services Summary... Service "+ASM" has 1 instance(s). Instance "+ASM1", status READY, has 1 handler(s) for this service... Handler(s): "DEDICATED" established:0 refused:0 state:ready LOCAL SERVER Service "ASM" has 1 instance(s). Instance "+ASM1", status UNKNOWN, has 1 handler(s) for this service... Handler(s): "DEDICATED" established:0 refused:0 LOCAL SERVER Service "PLSExtProc" has 1 instance(s). Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service... Handler(s): "DEDICATED" established:0 refused:0 LOCAL SERVER
Any help?[oracle@ admin]$ cat tnsnames.ora # tnsnames.ora Network Configuration File: /u01/app/oracle/product/11.2.0/db_1/network/admin/tnsnames.ora # Generated by Oracle configuration tools. XXX = (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = xxx-scan)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = xxx) ) ) ASM = (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = xxxdata-scan)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = ASM) (SID_NAME = +ASM1) ) )
Kind regards
Published by: LazyDBA11g on August 11, 2012 21:58
Published by: LazyDBA11g on August 12, 2012 03:27LazyDBA11g wrote:
Hi Experts,ASM =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP) (HOST = ucbdata-scan)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = ASM)
(SID_NAME = + ASM1)
)
)Any help?
Hello
First check that your asm is listening on listening port scan. If it is installed by default, so I suggest you change "(HÔTE = ucbdata-scan) ' to the local host where the asm instance"
second thing is there is typo in your tnsnames file. change this part "(SERVICE_NAME = ASM)" to "(SERVICE_NAME = + ASM).
It may be useful
See you soon
Fiedi -
ORA-12514: TNS:listener is not currently in service
I installed Oracle Database 11 g and I can access jet database SQL Plus and everything ok, but when I install developer Oracle 11 g and when I try to connect from the form of database, I can't.
and when I go to the Network Configuration Wizard and add the connection I find this error "" ORA-12514: TNS:listener does not currently of service requested in connect descriptor "and when I check the service all the Oracle service works very well."
I need help to solve this problem.
Thank you
EYADHello
I think that your installation of forms is not configured properly again to connect to the database.
Try to connect to sqlplus in forms_home with the name of the service, if you can connect to the database from there, you will be able to connect using forms also.
You have netconfiguration manager in you installation of forms, you can use it to add an entry of tns for your database
You can post your tnsnames.ora content of $ORACLE_INSTANCE/config
Please see the thread {: identifier of the thread = 1091615}
Concerning
SANAE -
ORA-12505 TNS Listener does not currently in SID
Hello
When I try to connect to Oracle Sql developer, error "ORA-12505 TNS Listener does not currently of SID given in connect descriptor". ""
I use 11 GR 1 material on Windows XPSP2 platform. But several sql works very well.
Thank you
Published by: user12222356 on April 11, 2010 07:20user12222356 wrote:
This time the Sql developer is connected successfully. But there is not a question of being happy because what happens frequently. Sometimes is connected while sometimes the connection refused... All, it seems, is that SQL Developer connection to the Oracle server depends on luck.
Is there any solution to get rid of this problem?It's a matter of timing.
First thing that should be launched is the listener. Who should be started on boot. For a laptop or another machine which uses the DHCP protocol, the listener must be configured to talk to the loopback adapter.
Then the database should be started to talk to listening on the port of sight to the listener - it is applied either with the "LOCAL_LISTENER" database being left to null (for the default listener on 1521). This can be checked by "Lsnrctl status" showing the instance of database such as saved and available.
Then the SQLDeveloper can start up, pointing to the same host, port, and service/instance, as shown in "lsnrctl status".
-
ORA-12514: TNS:listener could not resolve service_name
trying to duplicate db on a remote server, the message, I was wondering how I can make work PMCO is on the remote server, if I add this in listener.ora it says no db name race
Oracle: tulpcorpadb03$ rman TARGET sys/***@wcmp AUXILIARY.
Release of Recovery Manager: 9.2.0.8.0 - 64 bit Production
Copyright (c) 1995, 2002, Oracle Corporation. All rights reserved.
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-00554: initialization of the package manager internal collection failed
RMAN-04005: target database error:
ORA-12514: TNS:listener could not resolve service_name in connect descriptor
Oracle: tulpcorpadb03$ tnsping PMCO
AMT Ping Utility for IBM/AIX RISC System/6000: Version 9.2.0.8.0 - Production on November 5, 2009 11:21:44
Copyright (c) 1997, 2006, Oracle Corporation. All rights reserved.
Use settings files:
TNSNAMES adapter used to resolve the alias
Try to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP) (HOST = PWR_DB01-HA)(PORT = 1522)
() (CONNECT_DATA = (SERVICE_NAME = PMCO)))
OK (10 ms)
Oracle: tulpcorpadb03$ sqlplus "sys/***@wcmp as sysdba;
>
Oracle: tulpcorpadb03$ sqlplus "sys/***@wcmp as sysdba;
SQL * more: version 9.2.0.8.0 - Production game 5 11:23:06 Nov 2009
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
ERROR:
ORA-12514: TNS:listener could not resolve service_name in connect
descriptor ofConnection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=tulpcorpadb03) (PORT = 1521)))
Summary of services...
Service "PMCO" has 1 instance (s).
Instance "PMCO", LOCKED status, has 1 operation for this service...BLOCKED is a problem & needs to be solved.
local & remote control are meaningless from my point of view terms
using specific host names avoids confusion
Why 1 system uses use of 1522 & one other port 1521?
-
Hello
I installed Oracle 4 months before and work perfectly fine on until now. I could not able to connect to any DB or URL http://127.0.0.1:8080/apex/f? p = 4950
The connection failed with the below error
ORA-12514: TNS:listener is not currently of service requested in connect descriptor
Results of the LSNRCTL STATUS as below
C:\oraclexe\app\oracle\product\11.2.0\server\network\ADMIN > LSNRCTL STATUS
LSNRCTL for 64-bit Windows: Version 11.2.0.2.0 - Production on 3 January 2016 12:43
: 55
Copyright (c) 1991, 2014, Oracle. All rights reserved.
Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC1)))
STATUS of the LISTENER
------------------------
Alias LISTENER
TNSLSNR for Windows 64-bit version: Version 11.2.0.2.0 - Prod
ction
3 January 2016 start date 12:43:51
Uptime 0 days 0 h 0 min 4S
Draw level off
Security ON: OS Local Authentication
SNMP OFF
Default Service XE
Listener parameter File C:\oraclexe\app\oracle\product\11.2.0\server\network\A
DMIN\listener.ora
Listener log file C:\oraclexe\app\oracle\diag\tnslsnr\RAJESHK-PANTAR\lis
tener\alert\log. XML
Summary of endpoints listening...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1ipc)))
(DESCRIPTION = (ADDRESS = (PROTOCOL = tcp) (HOST = localhost) (IN.
RT = 1521)))
Summary of services...
Service 'CLRExtProc' has 1 instance (s).
Instance of 'CLRExtProc', status UNKNOWN, has 1 operation for this service...
Service 'PLSExtProc' has 1 instance (s).
Instance of 'PLSExtProc', status UNKNOWN, has 1 operation for this service...
The command completed successfully
C:\oraclexe\app\oracle\product\11.2.0\server\network\ADMIN > LSNRCTL SERVICE
LSNRCTL for 64-bit Windows: Version 11.2.0.2.0 - Production on 3 January 2016 13:0
: 08
Copyright (c) 1991, 2014, Oracle. All rights reserved.
Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC1)))
Summary of services...
Service 'CLRExtProc' has 1 instance (s).
Instance of 'CLRExtProc', status UNKNOWN, has 1 operation for this service...
Managers:
"DEDICATED" set up: 0 denied: 0
LOCAL SERVER
Service 'PLSExtProc' has 1 instance (s).
Instance of 'PLSExtProc', status UNKNOWN, has 1 operation for this service...
Managers:
"DEDICATED" set up: 0 denied: 0
LOCAL SERVER
The command completed successfully
Please help with what deliver you.
1. control file backup to trace using the "alter database backup controlfile to trace as 'C:\control.bkp ';
2. turn off your database
3 startup nomount
4. create controlfile from the backup created controlfile command. For example. See below (it is extracted from the trace my database controlfile. RESETLOGS option use as in 1st line
CREATE CONTROLFILE REUSE DATABASE "WIN1DB" RESETLOGS NOARCHIVELOG MAXLOGFILES 16 MAXLOGMEMBERS 3 MAXDATAFILES 100 MAXINSTANCES 8 MAXLOGHISTORY 292 LOGFILE GROUP 1 'C:\ORACLE\PRODUCT\ORADATA\WIN1DB\WIN1DB\REDO01.LOG' SIZE 50M BLOCKSIZE 512, GROUP 2 'C:\ORACLE\PRODUCT\ORADATA\WIN1DB\WIN1DB\REDO02.LOG' SIZE 50M BLOCKSIZE 512, GROUP 3 'C:\ORACLE\PRODUCT\ORADATA\WIN1DB\WIN1DB\REDO03.LOG' SIZE 50M BLOCKSIZE 512 -- STANDBY LOGFILE DATAFILE 'C:\ORACLE\PRODUCT\ORADATA\WIN1DB\WIN1DB\SYSTEM01.DBF', 'C:\ORACLE\PRODUCT\ORADATA\WIN1DB\WIN1DB\SYSAUX01.DBF', 'C:\ORACLE\PRODUCT\ORADATA\WIN1DB\WIN1DB\UNDOTBS01.DBF', 'C:\ORACLE\PRODUCT\ORADATA\WIN1DB\WIN1DB\USERS01.DBF', 'C:\ORACLE\PRODUCT\ORADATA\WIN1DB\WIN1DB\EXAMPLE01.DBF' CHARACTER SET WE8MSWIN1252 ;
5 mount the database 'edit the editing of the database'
6 open the database using newspapers to reset "alter database open resetlogs.
Thank you!
-
I get this error when you try to create a data store for Oracle database of the Disqualification.
ORA-12505, TNS: Listener does not currently of SID in the connection descriptor (code: 2 011)
I am able to connect to this database by using the same credentials through SQL, but the Disqualification, I'm not. Do I need to do anything in linux server before the implementation of Oracle data warehouses?
Thank you
Ravi
There are a number of ways.
1 use a JNDI connection configured in WebLogic and select by name
2. use the LDAP connection or TNS - see http://docs.oracle.com/middleware/1213/edq/DQEXT/config_dbase.htm#DQEXT202
3. Add an oracle.xml file in [local disqualification home] / dbconnectors with the following content. This will allow you to select the service name in the standard Oracle data store wizard:
Class = "com.datanomic.utils.databasespecies.species.Oracle"
MaxNameLength = "30" invalidnamechars ="" ' >
{JDBC:Oracle:Thin:@${service = "srv"? /': "} ${host}: ${port} {service ="srv"? '/' : ':'}${sid} Oracle {JDBC:Oracle:Thin:@${service = "srv"? /': "} ${host}: ${port} {service ="srv"? '/' : ':'}${sid} ${superior (schema = "? user: schema)} dbproductname ~ = '(?i) oracle' name ~ = ' $BIN\\ [A-Za-z0-9 + /] {22, 24} ==------$\\p {digit} +' user = ${user}
password = ${password}
FetchSize = 100
BatchSize = ${export.batchsize}
void = TRUNCATE TABLE %s
ALTER SESSION SET CURRENT_SCHEMA = ${schema} 1521 -
RMAN-04006: auxiliary database error: ORA-12504: TNS:listener has not been
HIII...
I was doing my dataguard configuration, my primary side is a 2 node RAC and my stand by is a single node.
IM using the database and 11 GR 2 grid infrastructure.
When I try to connect to the rating system standy priamry using RMAN im getting the following error.
[*[*Oracle@Rac2 ~] rman target $ / auxiliary sys / sys@to_std *.
Recovery Manager: release 11.2.0.1.0 - Production on Thu Sep 29 20:39:04 2011
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: RAC (DBID = 2346715690)
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-00554: initialization of the package manager internal collection failed
RMAN-04006: auxiliary database error: ORA-12504: TNS:listener did not have the SERVICE_NAME in CONNECT_DATA
My tnsnames.ora file is as follows
to_std =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = tcp (PORT = 9999))(HOST=datagrd))
)
(CONNECT_DATA =
(SERVICE_NAME = STB.msftpnq.com)
)
)
and my listsner.ora file is as follows
list_std =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = tcp (PORT = 9999))(HOST=datagrd))
)
)
SID_LIST_list_std =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = STB.msftpnq.com)
(SID_NAME = STB)
(ORACLE_HOME=/u01/app/oracle/product/11.2.0/dbhome_1)
)
)
Please can someone help me to solve the issue.
Thanks in advance.change the string Service_name in the tnsnames.ora file in the following and try again
(SERVICE_NAME = STB) will be replaced by (SERVICE_NAME = STB.msftpnq.com)
-
ORA - 12514: TNS:listener is not currently of service requested...
Hello Experts,
I could not able to connect a TOAD (Version 10.1.1.8). But I am able to connect to the SQL command prompt by using the same user name, password and SID. I was able to connect yesterday. Sometimes I reboot the system or restart the Oracle (Oracle listener and service) services.
Error message:* ORA - 12514: TNS:listener is not currently of service requested in connect descriptor
Advice me please.
Thank you.you have a database installed in your pc?
(1) if so then a toad specify the database, for example orcl.
(2) then in sys as sysdba username.
(3) give the password.
4) connect as SYSDBA.so useful then please note the SNA.
concerning
Maybe you are looking for
-
How looking emails that I previously played like those of importance?
I can't find any icon to click on to display only the emails that I clicked on the stars to mark them as important. I have Yahoo version of Firefox - that is the problem?
-
Satellite C660 - intermittent failure of start
Last month my Satellite C660 intermittently won't start. Frequency of failure seems to increase. The meter turns, the fan runs for 5 seconds (sometimes 15 seconds with an increase in speed at the end) and then the machine stops. No display of the bio
-
Satellite M70-129: user password controls access to the system at boot
Hello 1. from Toshiba Assist (password utility) I put the supervisor with string (text boards) owner password and then I put the user with chain owner password. But during startup BIOS only prompt you for the user password and his Rosary of owner. Us
-
Qosmio G does not recognize the mouse using two left USB ports
I'm right handed so I naturally put my optical mouse Saitec in the port of the right hand. The other day I plugged it in the ports of the two left hand and the machine did not recognize the mouse.He went through the process of installing the drivers
-
Hi all I recently downloaded Dragonball Z Mugen Edition 2 on my laptop and I'm using Windows Vista with NVIDIA GeForce 9300 M GS. However, when I try to launch the application, a box pops up saying: "this system does not support mode full screen. Cho