Oracle 10g FRM-41051 on a piece of text data with a LOV non-base

Similar Questions

• Hello Sir: I use a generator of form of oracle 10g and I want to search on two dates using between.how it is possible.

  Hello Sir: I use a generator of form of oracle 10g and I want to search on two dates using between.how it is possible.

  I guess its text fields are the date data type.

• Oracle 10g Rac (TAF)

  Hello
  I'm known for RAC env.
  How to implement TAF in oracle 10g RAC approx.
  and how do you know... and how conf (base & preconnect) services for which use them.
  Thank you
  KK
  
  Published by: user603328 on June 20, 2010 12:02

  Before you configure TAF, you should know about TAF

  If the instance fails, TAF allows applications to automatically reconnect to a different instance. The new connection will be identical to the original, but uncommitted, existing at the time of breaking transactions will be cancelled.

  TAF can be configured to perform two types of failover: session and selectwith the resumption of the session, any uncommitted transaction will be cancelled, and the session will be linked to another instance, with the resumption of the selection, uncommitted transactions will be cancelled, the second will be connected to another instance and any select statement that was running at the time of the breakup will be rerun by the sesion again using the same RCS and recoveries lines will be rejected upward until the original request has failed. The Select statement will continue return the remaining rows to the client.

  a TAF connection must be configured in the configuration file net tnsnames.oraOracle. In oracle 10.1 and higher, the DBCA services management page can generate appropriate TNS for the TAF entries.

  To configure the TAF, the TNS entry should include a FAILOVER mode clause that defines the properties of the recovery as follows,

  TYPE attribute defines the behavior as a result of a failure. Value: Session, select or none

  Attributes of the METHOD--> when connections are made to the failover. Value: base or preconnect

  ATTEMPTS--> number of times where a connection should be attempted before displaying an error.

  DELAY--> the time in seconds between each connection attempt.

  Reading Document Oracle,

  http://www.Oracle.com/pls/db102/search?word=configure+TAF&PartNo=

• Info on Earphone for oracle 10g and 11g installed on systm unique

  Hello
  
  I installed oracle 10g n 11g on my system. I have question regarding oracle listening port.
  
  Oracle 10g, Listener.ora
  
  LISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1))
  (ADDRESS = (PROTOCOL = TCP)(HOST = kankala.kalyan) (PORT = 1521))
  )
  )
  
  
  Oracle 11g, Listener.ora
  
  LISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1522))
  (ADDRESS = (PROTOCOL = TCP (PORT = 1522))(HOST = kankala.kalyan))
  )
  )
  
  My question is why the names of the listener are same even if your are on different ports?
  
  and for disturbing people, why I installed 10 n 11 is
  Initially only oracle 11g has been installed on my system. Later, I learned for the first time forms and I have to connect to the database frm developer suite 10 g. so I installed oracle 10 g database.

  The names are the same, because this is the way which you created them.

  If you want to make a change to use NETCA to delete and recreate one of them.

  Just make sure that you have set ORACLE_HOME properly until you do.

• oracle.stellent.ridc.protocol.ServiceException: "IN_128" piece of content has not been verified successfully. The content ID is not unique.

  Hi all

  I want to delete and a file with CRMI archiving...

  for the first time there are no the file and logging has happened successfully, but the second time,

  delete the specified file and immediately checkin file with the same id of content...

  then I get this error...

  oracle.stellent.ridc.protocol.ServiceException: "IN_128" piece of content has not been verified successfully. The content ID is not unique.

  I tried this steps webcenter content and everything is ok.

  
  

  I used JDevelpoer Version 11.1.1.6.0
  

  Please guide me

  I appreciate any help in advance

  and I'm sorry because I'm not fluent English

  Hello

  Sorry, I did not understand your last response. This approach works for you? Is this useful?

  When you create a revision of the document content ID is not going to change. Please connect to the content server to check the result.

  Whenever you discover a content item and check plug, Content Server creates a new revision of this piece of content. The new revision has the same content as the previous version ID, but the native file and metadata can be identical or different. The system saves previous versions of a content item, so you can view them as necessary.

  Thank you

  Amey

• Oracle 10g of MSSQL 2005 database link

  Hello

  We are configuration link database to oracle 10g of mssql 2005

  Thanks to the heterogeneous connectivity. We get the following error when testing database link.

  ORA-28500: connection between ORACLE and a non-Oracle system has sent this message:

  ORA-28541: error in the HS on line 1 init file.

  ORA-02063: preceding 2 lines of < SID >

  28500 00000 - "connection between ORACLE and a non-Oracle system has sent this message:

  * Cause: The cause is explained in the forwarded message.

  * Action: See documentation for the non-Oracle of the transmission system

  Message.

  Error on line: column 4:19

  Can someone guide correct configeration of Hetrogeneous Service and why the error arises.

  Thank you

  Basu,

  Dg4ODBC gateway can be used with the 10.2.0.5 database. It is certified and no additional license is required for the database to ODBC gateway - the license is included in the license database (even when the Oracle database is still version 10.2) AND you can also install Dg4ODBC on another machine, then the Oracle database. There is no need to have Dg4ODBC installed on the same computer as the Oracle database.

  -When you install DG4ODBC on the same machine as your Oracle 10.2 database, then install in its own, separate OH - otherwise you will corrupt your existing installation of the database.

  -Klaus

  Post edited by: kgronau

• Is there a way to fill the boss way recursive/dynamically in oracle 10g

  Hello

  I want to complete the following template and then use the result as a virtual table in oracle 10g.

  SELECT 2 FROM DUAL;

  UNION ALL

  4. SELECT FROM DUAL;

  ALL UNIONL

  8. SELECT FROM DUAL;

  .

  .

  .

  .

  UNION ALL

  . SELECT POWER (2.61) FROM DUAL;

  Is it possible that I can use the recursion or dynamic query with "with clause" and avoid writing all these statements.

  Thank you

  YG

  Hi GY,.

  In 10g, you can use a clause of the TYPE:

  SELECT nbr

  OF THE DOUBLE

  MODEL

  DIMENSION (2 d)

  MEASURES (number 0)

  RULES ITERATE (61)

  (nbr [ITERATION_NUMBER] = power (2, ITERATION_NUMBER + 1))

  ORDER BY nbr;

  From 11 g 2, you can use a WITH recursive clause:

  WITH v (n, lvl) AS (SELECT 2 n, 1 lvl FROM DUAL

  UNION ALL

  SELECT 2 * n, 1 + lvl

  V

  WHERE the lvl<=>

  )

  Select n v

• Disable the Tunning &amp; diagnostic packs in oracle 10g and oracle 9i

  Hello

  According to the license agreement, our organization asked to disable the packs tuning & diag on Oracle databases.

  We use versions diff of databases oracle (oracle 9i, 10g, 11g)

  In oracle 11g, we can disable tuning & diag packs using the control_management_pack_access parameter to none.

  How to disable the setting & diag packs in Oracle 10 g and oracle 9i?

  Thank you

  AWR did not exist up to 10g, so I don't think that the diagnosis of EM or Tuning Packs are a problem with 9i.  As mentioned statspack is free and available always in 11g, so it is available for use.  -Mark-

• Oracle 10g with 10.2.0.5 patch app thin?

  Hello

  I'm working on creating a fine app for oracle 10g. I am able to create the thin application without patch and everything seems to work normally, but in our situation, we must apply the 10.2.0.5 patch. When I patch the program, everything still seems to work ok, so I'm going through with the postscan, which also seems to work fine until there finishes.

  I don't know if this is related, but I get the following warnings after the postscan:

  Could not copy the file--> C:\Program Files (x 86) C:\ProgramData\Microsoft\RAC\StateData\RacMetaData.dat \VMware\VMware ThinApp\Captures\Oracle 10 g + patch\%Common AppData%\Microsoft\RAC\StateData\RacMetaData.dat
  Could not copy the file--> C:\Program Files (x 86) C:\ProgramData\Microsoft\RAC\StateData\RacWmiEventData.dat \VMware\VMware ThinApp\Captures\Oracle 10 g + patch\%Common AppData%\Microsoft\RAC\StateData\RacWmiEventData.dat
  Could not copy the file--> C:\Program Files (x 86) C:\ProgramData\Microsoft\Search\Data\Applications\Windows\MSStmp.log \VMware\VMware ThinApp\Captures\Oracle 10 g + patch\%Common AppData%\Microsoft\Search\Data\Applications\Windows\MSStmp.log
  Could not copy the file C:\Users\All Users\Microsoft\RAC\StateData\RacMetaData.dat--> C:\Program Files (x 86) \VMware\VMware ThinApp\Captures\Oracle 10 g + patch\%drive_C%\Users\All Users\Microsoft\RAC\StateData\RacMetaData.dat
  Could not copy the file C:\Users\All Users\Microsoft\RAC\StateData\RacWmiEventData.dat--> C:\Program Files (x 86) \VMware\VMware ThinApp\Captures\Oracle 10 g + patch\%drive_C%\Users\All Users\Microsoft\RAC\StateData\RacWmiEventData.dat
  Could not copy the file C:\Users\All Users\Microsoft\Search\Data\Applications\Windows\MSStmp.log--> C:\Program Files (x 86) \VMware\VMware ThinApp\Captures\Oracle 10 g + patch\%drive_C%\Users\All Users\Microsoft\Search\Data\Applications\Windows\MSStmp.log
  Could not copy the file C:\Users\All Users\Microsoft\Windows Defender\IMpService925A3ACA-C353 - 458 A-AC8D - A7E5EB378092.lock--> C:\Program Files (x 86) \VMware\VMware ThinApp\Captures\Oracle 10 g + patch\%drive_C%\Users\All Users\Microsoft\Windows Defender\IMpService925A3ACA-C353 - 458 A-AC8D - A7E5EB378092.lock
  Could not copy the file C:\Users\All Defender\Scans\History\CacheManager\MpSfc.bin--> C:\Program Files (x 86) Users\Microsoft\Windows \VMware\VMware ThinApp\Captures\Oracle 10 g + patch\%drive_C%\Users\All Users\Microsoft\Windows Defender\Scans\History\CacheManager\MpSfc.bin

  And then finally I get this at the end of the 'Build Project' message:

  C:\Windows\hh.exe: an executable not valid
  Build failed *.

  I can't determine why the build fails.

  Any help would be appreciated.

  Hi Mark

  1. the warnings that you are seeing after Postscan aren't a problem, in my view, they are for most of the newspapers that were not copied to the ThinApp of your application project (probably because access is denied because some application process is running and use).

  2. the error you see regarding hh.exe during the generation probably occurs because it is a 64-bit binary (and ThinApp 4.7.3 can't stand not the 64-bit binaries), in all cases, please open the file package.ini in the project folder (the folder that contains the project ThinApp registered Oracle 10 g, generated by the capture process) and find the section [hh.exe] and add 'Disabled = 1' under it , and then try again to build again by running build.bat.

  Thank you.

• not able to uninstall oracle 10g, how I uninstall oracle 10g IAM?

  actually iam using oracle10g in my laptop. now I just want to change for oracle 11g. I tried to uninstall 10g it shows uninstalled successfully. but when I tried to install 11g it shows already oracle is installed on your laptop...

  now how do I install 11g without formatting... can my drive you give me the solution for this...

  Hello

  You must uninstall oracle 10g by

  1.Oracle Universal Installer from Start menu

  2. Run regedit.exe and delete the HKEY_LOCAL_MACHINE/SOFTWARE/ORACLE key.

    This contains registry entries for all Oracle products.

  3 make sure that he didn't there no service oracle left behind in the services Panel

  4 restart your computer

  5.Delete the "C:\Oracle" directory, or the oracle_base directory on which you had installed oracle 10g

  regards,

  -DM

• Oracle 10g and 11g reports

  I recently upgraded from Oracle Forms/Reports 10 g and 11g.  Oracle 10g reports saving as PDF is easily converted into a word document, however, Oracle 11 g converts not as 10 g.  What is the difference and how to make the report of 11g saved in a PDF file be able to convert a Microsoft Word document itself.

  Thank you

  Steven

  
  

  Hello

  There is a "known issue" with the PDF file in 11g:

  ALERT: Indicates problems PDF in 11.1.2.1.0 group of fixes for Non-Linux (Doc ID 1522543.1) platforms

  Maybe the problem comes from this 'problem '...

  "Patch Set Exception" exists for this problem.

  Kind regards

• How to send a mail in oracle 10g

  I am new to oracle developer... we use oracle 10g developer... How to send messages via oracle 10 g on a click.pease button help me.

  Thanks in advance

  This question was asked several times on this forum, see if you get the help of the following:

  https://forums.Oracle.com/message/5395438#5395438

  Search results: https://forums.oracle.com/thread/search.jspa?peopleEnabled=true&userID=&containerType=&container=&q=form+email

  Check this out as well:

  http://nzchaudhry.WordPress.com/2013/05/31/send-report-via-email-attachment-in-Oracle-Forms-10G/

  You can find the init.ora or initSID.ora file under $ORACLE_HOME/dbs on linux and Windows under $ORACLE_HOME/database. Otherwise, you can create using the command "create pfile from spfile.

  Aneel

• Urgent: db link from oracle 10g to sql server 2000

  Hello

  I have an oracle 10g db connection to sql server 2000. It was created a couple of years. This works.

  I have now created another link db of the same oracle on the same sql server server but it does not work.

  But I'm getting ORA-28500 and error IM002

  . Please notify.

  I can't understand what is wrong as I followed the hs odbc set up on this link db in the same way as I did 2 years ago.

  Thank you

  Shailaja

  Just sort the problem.

  Basically, I use HSODBC to connect to SQL Server from Oracle (on windows 2003 64-bit).

  To do this, I need to create a connection ODBC from Oracle to SQL Server.

  HSODBC is a 32-bit application and is why we use the ODBC 32-bit driver when we create the ODBC connection.

  When I created the connection ODBC from Oracle to SQL Server, I used the ODBC 64-bit driver and that's why the system could not find the name of the data source.

  I have now created connection ODBC from Oracle to SQL Server via the ODBC 32-bit driver and everything works fine now.

  No offense to anyone, but as you all works using Oracle software, I was hoping a better answer than some of the answers above. You can say that you did not understand the question or you do not know the reason why it happened.

  I have just listed how the problem was fixed so that in the future one having the same problem can benefit.

• Oracle 10g 11g vs?

  Is - this here is output expected between the different versions of DB?
  
  Oracle 10g

  select utl_url.escape('http://sample.com/questions/hea[der.html') from dual;

  O/P

  http://sample.com/questions/hea%5Bder.html

  Here characters ' [' is dropped.]
  Oracle 11g

  select utl_url.escape('http://sample.com/questions/hea[der.html') from dual;

  http://sample.com/questions/hea[der.html

  Here characters ' [' is no exception.]

  Support UTL_URL note. ESCAPE escape is no longer some characters such as brackets [] in 11.2 [1467611.1 ID]:
  >
  The UTL_URL procedure. ESCAPE has been updated to 11.2 in conformity to the specification of the URL RFC 2396. The procedure only escapes illegal characters (and possibly reserved characters) using the 2%-figure-hex-code format. It appears that some legal / reserved characters (such as [and]) have also been dropped in earlier versions.

• Oracle 10g application server

  Hello
  I installed oracle 10g application server on my system. Now, I need to develop forms and reports that the tool I need to install.
  
  Thank you.

  Try the Oracle Developer suite 10, http://www.oracle.com/technetwork/developer-tools/developer-suite/downloads/index.html