Oracle certification validation period or not?

Similar Questions

• The course that I did for the OCP certification in Oracle Database 11 g does not appear on the list of courses on the pearson Web site view.

  The course I did for the OCP certification in Oracle Database 11 g does not appear on the view list of courses on the pearson Web site, I sent an email to [email protected] < deleted by the moderator e-mail address > , no response within 7 days since 01/28/2015, enamel is lower, the title of my course is in Portuguese.  What should I do in this case?

  ------------------------------------------------------------

  Dear Oracle.

  I send you this mail because recently I passed the exam 1Z0-053-Oracle Database 11 g: Administration II, which is the last review necessary to acquire the OCP Certification. However, in the path to certification, I need to prove that I participated in an official Oracle training.

  Research for the course on the site to view pearson, I did find the name of course on the list. So I'm sending you this email with the courses required for certification information. I attended the course at FIAP College (http://www.fiap.com.br/en/conheca-a-fiap/parcerias-estrategicas/), in the city of São Paulo (Brazil) of March, 2010 until March 2011. The above link is possible to check that the University is a partner of Oracle. The title I had was "Graduate in Oracle Database Management".

  In this e-mail, I have attached a copy of the certified course FIAP (front.jpg, certificate Back). I also send my profile data in the site view pearson (Pearson VIEW - my profile.pdf) and my scores on tests for certification of OCP (1Z0 - 051.pdf, 1Z0 - 052.pdf, 1Z0 - 053.pdf).

  If you need additional information just let me know and I'll give you.

  Please acknowledge this information and give me the OCP certification (Oracle Database 11g Administrator Certified Professional).

  Kind regards.

  Italo Moises dos Santos.

  Oracle ID: < deleted by the moderator test >
  

  ------------------------------------------------------------

  I did this way, because the https://education.oracle.com/pls/eval-eddap-dcd/OU_SUPPORT_OCP.home?p_source=OCP link has not worked, I sent my class even without knowing if it will be accepted, so I exchanged a few emails and my journey has been accepting.

• Reopen the period AP with APP-SQLAP-10363 error: you cannot reopen this period because the corresponding period to the Oracle GL or PO is not open

  Hi all

  I have a question about the period of reopening AP with error APP-SQLAP-10363: you cannot reopen this period because the corresponding period to the Oracle GL or PO is not open.

  
  

  I checked the implementation of Oracle Payables Guide ,
  
  documented that you can reopen a closed period if the corresponding accounting and buying periods are also open.

  
  

  The user do not purchase Module install, if not show the error, right? Or what other pupup notification to the user?

  
  

  
  

  Thank you

  Michelle
  

  Hi Michelle,

  The code (apxsumps.fmb) checks if the State of closure in GL and PO are 'C' or 'P' for the period to be reopened. If the purchase is not installed and not used, then this query should return no rows and not cause this error.

  Cheryl

• How rate/knowledge so ready for the Oracle Certification

  Hi, I am interested in an Oracle Certification exam (1Z0-144), but I'm not sure if I'm ready.

  Any suggestions on how I could notice me if I am ready for the examination? I have (almost) no idea on what would be the review or what topics would be covered.

  Are there sample examination questions that might similiarly appear in the review?

  appreciate your answers.

  Oracle PL/SQL (and SQL) certifications are not really related to the output of the database as are the DBA certifications. The exam 1Z0-147 was developed during the version 9i, and the exam 1Z0-144 was developed during the release of 11 g.  However, a review wins the same certification credentials (i.e. you do not become a 'Oracle 11 g PL/SQL Developer Certified Associate'.  The reason is that SQL and PL/SQL undergo massive changes from one version to the other. However, they change slightly from one version to the other, and OU must periodically update information on trial so that it matches the available capacities.  I talk about this in the article below.  It is specific for reviews of databases SQL, but the basic concepts are the same for reviews of PL/SQL.

  Preparation of Oracle Certification: Oracle SQL Fundamentals exams and database versions

  Basically However - even if you are using oracle 10g, I recommend that you take 1Z0-144, because it's a review better than 1Z0 - 147.  I give my reasoning for it the following article:

  Oracle PL/SQL Developer Certification: 1Z0-147 or 1Z0-144?

• Registration with Pearson VIEW Oracle Certification - experiences

  * Please note that I already have an account with Pearson VIEW (but obviously wrt another Test program).
  
  
  
  * I made VERY sure that I hand by Prometric ID before starting the process.
  
  * on the first attempt through bigdelboy missed the radio button to say that his company was not a partner of oracle, he then allowed by field Oracle ID(Prometric ID) BS as I entered, so I returned it. He then forced me to confirm it on another page.
  
  * Then, I got the following response:
  

  Testing Programme Information
  
  Your request to add Oracle Certification Program has been forwarded to our Testing Programme team. If you provided a valid email address, we will notify you when your request has been processed. This typically occurs within one business day. You can also return to this site and check if Oracle Certification Program has been added to your list of Testing Programmes.
  
  Thank you for your interest in Oracle Certification Program!

  I did about 14 September 2009 13:30 CEST.
  
  
  I will update the thread in the course of things...
  
  
  -Key points are:
  (0) If a recording is in progress with Pearson VIEW for the first time so don't forget your registration information.
  (1) ensure a has its former Prometric ID at hand (and never publish it on the web - or disclose to anyone).
  (2) there may be a delay by adding the test Oracle on its profile program; and we can't plan reviews until it ends.
  -I couldn't imagine that there may be a delay with what happens in the next few weeks,
  
  (3) somehow I feel nervous about this if I have completed a review of Promteric, or had completed a Prometric Exam in the last days.
  (4) my Pearon VIEW and Prometric addresses match... This could help my cause.
  
  
  
  Please note that this is progressing well so far... I'm really just share my viewpont experience
  
  Published by: bigdelboy on 14-Sep-2009 08:21 - well, I left 3 hours and tried to tether at Pearson for Oracle and it said:
  Before you continue, your account must be updated. Please go to add the test program to add the Oracle Certification program to your profile.
  
  Which is the same info, I entered before so I did not need to be reintroduced to it. I'll try again some time later.
  
  PS: - either by the way, I noticed that... [http://www.pearsonvue.com/about/release/09_09_01_oracle.asp]... so my mugshot and covering scribbles will be captured.
  
  Published by: bigdelboy on 19-Sep-2009 23:09 (change of title of bigdelboy experiences of experiences that others have contributed in a significant way)

  Comment: Email received at 6:23 with the new user name and temporary password
  -not the choice to use a specific user name. Well, guess this is written down!
  Action: Connect, forced change of the password
  -password strength is monitored. good thing I have a forte in my rep stardard

  Concluding observations:

  My first name, middle initial and name (for printing in the certificate) have been converted to lowercase, without the possibility to fix this. Personal profile page says I need to contact customer service to fix this. (LOL)

  None of my history of test is transferred. The page says it's 'history of Pearson VIEW tests', so I don't know if that still counts.

  It's a "first registration" moderately painless with a VIEW. Just took a little time and patience.

  Certainly, it feels like screens and traffic were never really completely tested by someone outside the development environment - they 'work', but don't let the taste to have been done by a professional organization with expertise in web-oriented systems. I don't know which will happen in a future release.

  Published by: Hans Forbrich on September 22, 2009 09:42

  I'll duplicate some of this in my blog. Maybe it will help others make the transition.

• How report us suspicious books, etc. on the oracle certification?

  
  How report us suspicious books, etc. on the oracle certification?

  For example, go to www.amazon.com and enter the following "marathon of the Oracle.

  Look at books, etc. "by M.

  user6862024 wrote:

  How report us suspicious books, etc. on the oracle certification?

  For example, go to www.amazon.com and enter the following "marathon of the Oracle.

  Look at books, etc. "by M.

  Well seen.

  Certainly on amazon.co.uk there was a bunch of braindump kindle publications in February.  It was a link to a url in one of them and certguard.com said braindump site.  In general only unpublished reputable publishers on amazon... now here can be a risk people scan a few pages/PDF of the copyright and area to make a quick profit.

  https://blogs.Oracle.com/certification/entry/cheating_part_7_what_can_you_a indicates that you can send an email [email protected] (they will not respond normally, but I know they'll take advice.

  You can also get the same email Global FAQ... search "fraud".

  (I am a bit careless in reports but only noticed amazon navigation at Easter... and I was distracted and busy... and who says fraud ocp are already probably already aware.)

• Ask about Oracle certification for the Admin path

  Hi I have the underside of certifications under my belt:-1. Oracle Certified Associate of PL/SQL Developer 2. Oracle PL/SQL Developer certified professional that I would give Oracle Database 11 g administration Associate certification. I see that I need to give exams 1Z0-051 and 1Z0-052 for. So my question is whther I need to give Z051 review? Keeping in mind, I traced level OCP, authorized as a PL/SQL Developer. Thanks in advance...

  How can I get confirmation on this officially?

  See the FAQ:

  https://education.Oracle.com/pls/web_prod-PLQ-dad/db_pages.GetPage?page_id=82

  Look for the "SQL Fundamentals".  One of the questions will be: "How long can I use an exam to earn a certification? "Exam results expire?"

  The answer is: "do not expire the results of exams, but certifications are retiring, and that affects your older test results will help you to get certified or not. "

  If a specific review meets a requirement in a current certification path, it does not matter if you have passed the exam. "For example, if you have taken SQL, # 1Z0-001 review in 1997, you can always use it meets the requirement of SQL for Oracle database current certification."

  If you do not trust that - the moderator of the forum, Brandye, can come in a day or two to confirm what I said.  However, there is no doubt.  The question comes up fairly often.  In fact, I wrote a blog on this subject for more than a year (although this would not even "official", of course):

  Preparation of Oracle Certification: Oracle SQL Fundamentals exams and database versions

• &lt; error &gt; &lt; security &gt; &lt; BEA-000000 &gt; &lt; validation events is not available because no JMS Transport is available. The remote L2 caches will be out of sync. &gt;

  I'm trying to set up a cluster, I installed my SQL server DB and Weblogic Portal 10.3.2 on two different machines and each thing is correctly configured according to my knowledge.

  but when I am trying to start my node managed on a remote machine, out of sync error continually as shown below

  < 6 sep, 2014 16:42:02 IST > < error > < security > < BEA-000000 > < validation events is not available because no JMS Transport is available. The remote L2 caches will be out of sync >

  < 6 sep, 2014 16:42:07 IST > < error > < security > < BEA-000000 > < validation events is not available because no JMS Transport is available. The remote L2 caches will be out of sync >

  < 6 sep, 2014 16:42:13 IST > < error > < security > < BEA-000000 > < validation events is not available because no JMS Transport is available. The remote L2 caches will be out of sync >

  < 6 sep, 2014 16:42:18 IST > < error > < security > < BEA-000000 > < validation events is not available because no JMS Transport is available. The remote L2 caches will be out of sync >

  < 6 sep, 2014 16:42:24 IST > < error > < security > < BEA-000000 > < validation events is not available because no JMS Transport is available. The remote L2 caches will be out of sync >

  NOTE: I can connect to my DB using java utils.dbping [MSSQLSERVER4 |] MSSQLSERVERB] < db username > < db and user password > DB_Host:Port / Db_name on two physical machines.

  is there no work around for this problem, as I am not able to get around this error and is unable to start my managed computer node.

  Thank you

  Punishes

  Hello

  Notes on MOS:

  It is an issue that occurs because the RDBMS security store configuration problem. In order to synchronize the RDBMS security store data, WLS uses the JMS topic for transport, which is not met in this case and therefore this error. The solution is to configure the JMS topic according to the above reference documentation. However this post ideally is not an error but a simple warning message. Thus, in the context of the code fix, we delivered a patch for WLS, to change the gravity of this message of 'ERROR' to 'WARNING '. This patch can be downloaded using My Oracle Support Portal using:

  Bug number: 13459424

  Patch ID: NF9G

  Emmanuel

• News on Oracle certification

  Hi there guys.
  
  I did OCP 10 g Certification a few months back... Now, I want to make the Certifications for Oracle Database 10g R2: administering RAC & Oracle E-Business Suite R12. Is there any requirement for these exams? I will have to take courses for these certifications or can I give a review of course student?
  
  Thank you.

  First of all, there is a Community of Certification where it would be more appropriate.

  Second, assuming you're a DBA OCP (there are a lot of different OCP certifications) 10 g, you would not need additional training in the classroom in order to obtain a RAC ECO 10 g certification. There are a ton of different certifications of E-Business Suite so I don't know which particular talk and think. You can go to the website of Oracle certification for Oracle all certification requirements that you are interested in.

  Justin

• validation, but has not found any error line

  Dear all,
  
  When I restart the data that I encounter the following error, help me how to handle this case of use as point me blog useful links.
  
  
  Error
  
  Validator CntrD_Rule_0 needs a line of the BookingExpVO_1794 iterator
  to perform its validation, but did not find any line. Failed validation in line with key oracle.jbo.Key [I-AAA42120303382].
  
  
  
  Concerning
  KT

  I got the answer, I defined the Validation values to both sides of 'Entity Business Logic Unit' and entity object. When I removed the side validation object entity my program now works without error.

  Concerning
  KT

• FDM Validation period

  Hi guru FDM!
  
  Y at - it all characteristic of the validation period when you do batch processing / Planner?
  
  Any contribution is appreciated!
  
  Thanks and greetings

  Validation only period THAT FDM will happen during batch processing load is that you specify a validity period that exists in the control period Table. If the target system, you load that has locked the data entry period and then of course the batch will fail. However if you load by mistake a file say July when you wanted to load in June and the period exist in the control of the period table and is open for data entry in the application target then FDM intercepts not this. Also, it does not check the lines of data contained in the file that actually belongs to the same period you specified in your file name. If you want to do this, you will need to write a custom yourself validation script and include it in your batch.

• VISA (Hex 0xBFFF001E) error the specified state, the attribute is not valid or is not supported as defined by the resource.

  Hello

  First of all that I must say I just starting with control of the instrument using Labview. For this reason, it is possible that the problem I have is easy to solve. However, I am looking for any solution for the forum, but unfortunately I can't fint anything.

  While the situation is this: I'm looking to plug a power Analyzer (Yokogawa WT1800) with the PC through GPIB. To achieve this, I use the USB/GPIB Interface of Agilent 82357 B. The connection is done correctly because I can see and communicate with him through the Explorer NI MAX.

  In order to achieve control of the instrument using Labview, I downloaded and installed the driver of Yokogawa WT1800 (Driver instruments ykt1800) using the NI Instrument Driver Finder tool. The problem I have is that when I run the examples, I find the following error message:

  Error 1073807330 has occurred to the property (arg1) node in Yokogawa WT1800 Series.lvlib: Initialize.vi-> Yokogawa WT1800 series continuous measurement Normal.vi

  Possible reasons:

  VISA: (Hex 0xBFFF001E) the State specified, the attribute is not valid or is not taken in charge as defined by the resource.

  I tried to change the input of the open Visa arguments vi because I think that this is where is the problem, but I can't reach any solution. The following image is attached to the block diagram of the initialize.vi:

  

  Any help is appreciated.

  Thank you.

  I suspect the redirect property. Try to remove it.

• VISA: (Hex 0xBFFF001E) the State specified, the attribute is not valid or is not supported as defined by the resource.

  I try to open a com port Seraglio in LabVIEW get this error:

  VISA: (Hex 0xBFFF001E) the State specified, the attribute is not valid or is not supported as defined by the resource.

  It occurs in ISA set up a Serial Port (Instr) .vi and seems to be related to the speed of transmission. If I use anything else than 9600, I get this warning. I need to use 115200. I can open successfully to other com ports at 115200.

  I am able to talk to this device using other Terminal programs to 115200 without problem. It is only through LabVIEW and NI MAX.

  The Unit presents itself as "Stellaris Virtual Serial Port (COM12)" in deveice Manager.

  Is there a way to get around this?

  Thanks in advance!

  
  

• Cannot install Atlantic Quest - Atlantic Quest. The ink is not that a Win 32 application___ valid %1 is not a valid Win 32 application

  Original title: I bought Atlantic Wild Tangent __I Quest get the next Quest message___C:\ProgramData\Microsoft\Windows\GameExplorer\668DAD4E-7352-4D98-B28E-4...\Atlantic. The ink is not that a Win 32 application___ valid %1 is not a valid Win 32 _ application

  I have a Dell Inspiron 580 i3 6 GB ram 1 TB disk 64 bit (only a month)

  I got an exe file. record and I think it's the file that was the problem. In the folder of the file (that I have redownloaded 6 times), I noticed that he was not an exe WT. like my other games have.  In any case, I asked for a refund and downloaded the game even MSN. Everything works now. Thanks for your response!

  Slyrex

• Vista - Error Code: 1706 (cannot install updates) valid any source not found for product Microsoft works9, which came with my vista

  Microsoft Works 9 came with my Windows vista Home Premium April 14,2009, I leave automatic updates do their thing, such as recommended and I was prompted to restart. So I did.    Now it always tells me I have the same important updates 3.

  (A security update for Microsoft Works 9 (KB2092914) and office 2007 (KB2251419) word and office system (KB2277947).

  So now, he tells me when I click on ms works, that the error 1706 no valid source could not trading for the microsoft works product. Windows install cannot continue.

  That's the only change I made to my computer, so I did what I could do,

  I contacted HP for help and we have tried everything and to

  Discover that now my "D" drive is corrupt also.

  I would like to know how I can get back my program without making a recovery or even buy it?

  I really hope someone out there can help me.

  You know I bought an XP in 2003 and it is still a good kicking.

  Thank you

  Hello

  You can check if the error message you get when you try to use the application is due to the failure of the installation of the update of Windows related to Microsoft Works.

  Step 1:

  Check in Windows Update history if the installation failed or not for the 3 articles mentioned.

  To open Windows Update history

  (a) click theStart button,.

  (b) go toControl Panel,.

  (c) selectprograms, and then, under programs and features.

  (d) clickview installed updates.

  (e) search for update driver for the printer, get the KB article number.

  Step 2:

  You can perform a restore of the system on the computer to restore back the previous settings control also if Microsoft Works works.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  For more information follow the link below.

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  Step 3:

  If the installation fails, try to install the updates manually and check what is happening. Click the links to download the three updates mentioned.

  Update of security for Microsoft Works 9 (KB2092914)

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=feb121ad-e5f6-40E2-BF12-045ae5c2a754&displaylang=en

  Update of security for Microsoft Office Word 2007 (KB2251419)

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=0d7210a3-662e-41e7-AFFC-ae94f9d89388&displaylang=en

  Update of security for Microsoft Office Word 2007 (KB2251419)

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=ed5b9671-651d-41F3-aed3-93ee8a28657f&displaylang=en

  Note: Before to install updates manually set the computer to clean up state of startup and then continue with the installation. To configure your computer to clean boot follow the link below.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Once you have finished installing the updates, follow step 7 article to start on normal startup.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.