Cannot install Atlantic Quest - Atlantic Quest. The ink is not that a Win 32 application___ valid %1 is not a valid Win 32 application
Original title: I bought Atlantic Wild Tangent __I Quest get the next Quest message___C:\ProgramData\Microsoft\Windows\GameExplorer\668DAD4E-7352-4D98-B28E-4...\Atlantic. The ink is not that a Win 32 application___ valid %1 is not a valid Win 32 _ application
I have a Dell Inspiron 580 i3 6 GB ram 1 TB disk 64 bit (only a month)
I got an exe file. record and I think it's the file that was the problem. In the folder of the file (that I have redownloaded 6 times), I noticed that he was not an exe WT. like my other games have. In any case, I asked for a refund and downloaded the game even MSN. Everything works now. Thanks for your response!
Slyrex
Tags: Windows
Similar Questions
-
A security update for windows THAT XP cannot install (KB2707511). Code received the error 0x80076BE. How to install this update?
Hello
You are able to install other updates successfully?See the methods mentioned below and check if that helps.Method 1: Temporarily disable the security software.Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.
Method 2: put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353Note: After completing the troubleshooting steps in the clean boot, follow steps to configure Windows to a Normal startup State of the link section to return the computer to a Normal startup mode.
Method 3: Follow the steps in the article.
How to reset the Windows Update components?
Method 4:You cannot install updates from Windows Update, Microsoft Update, or by using the auto update after a repair of Windows XP after installing Windows XP SP3 immediately after a clean installation of Windows XP SP2 orHope this information helps. -
Cannot install After Effect free trial, the page shows "that we are now some questions, please try again later." If the problem persists, contact customer support. "for several days.
Is this problem will soon be resolved? Thank you!
You MUST have a 64-bit computer and operating system... What is your computer?
-Programs are supposed TO not view or download if they are not installed on your computer
MINIMUM for After Effects and Premiere Pro http://helpx.adobe.com/premiere-pro/system-requirements.html
-
Hi all
I worked on creating a better system for my business get an OS up-to-date with all the required software, settings, and drivers. I have previously using WDS as autonomous and just syspreping images and pushing them up until he became incoherent and corrupting of the parts of the image. I did a little surfing on the web and discovered that many computing professionals use MDT to produce images of quality with all the customization they need. So that's the problem.
The image works fine. I'm able to customize the way in which I need to and get most of my successful deployed pilots (problem with trackpad drivers), but the error message I get when I try to run a windows update is "windows that update cannot currently check for updates because the service is not running." After I received this message I check my services and it shows the update of Windows running service and long-term as well running services. Tried to restart as suggested and still no results. Undertook research for a possible fix and still nothing.
Any help?
It became quite a headache for me. Thank you guys
Hello
Thanks for posting your query in Microsoft Community.
I understand that you have problems with the installation of Windows Update.
If you your computer are connected to a domain network?
If Yes, then post your query in TechNet forums because they have more expertise in this issue to help you better. Please follow the below link to do the same.
T echNet Forums for Windows 7
http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworkingHope this information helps.
-
When I try to install the updates I receive the message "Windows Update cannot currently check for updates, because the service is not running." You may need. "" Restart your computer, It does not also. check me the update history
Hello
1. you made any hardware or software changes the computer recently?
2. What is the number of update?
3. do you get this message for all the updates?
Follow these methods and check if that helps:
Method 1:
Step 1.
Unplug all external devices, restart the computer, and then try to install updates.
Step 2:
I suggest that you follow the steps mentioned and try to start the Windows update service.
Check if the following services are running.
(a) Background Intelligent Transfer Service
(b) cryptographic Service
(c) Windows Update
(d) Windows Installer
a. Click Start, type "services.msc" (without the quotes) and press ENTER.
b. double-click the service name in the Services list.
c. under the general tab, next to startup type, make sure that automatic is selected.
d. If the service is not already running, under Service status, click Start and then click OK.
e. once the services are started and defined as running, try to install the updates and check.
Method 2.
You can follow the steps in this article: http://support.microsoft.com/kb/2509997
Warning check disk.
Important: All by performing the check disk on the hard drive if bad sectors are found then check disk try to repair this area, all available data on this sector can be lost.
Registry warning
To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
322756 (http://support.microsoft.com/kb/322756/)
How to back up and restore the registry in Windows
See also: the problems with installing updates
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
-
Unlike before, I can't launch the Windows automatic update service now, I suspect that my computer is infected virus, I just install demo version free of McAfee internet security and run a full scan, no infection has been detected.
Description:
When I click on Windows update for all programs at startup, pop out window update, and then I click on "check update", out another part: list "" Windows Update cannot currently Check For Updates, because the Service is not running. "You may need to restart your calculater ', then I restart the computer a few times, the same problem still persists. before I was using microsoft essential secruty with no problems, but now I can't seem to complete the definition of update, so I think this problem could be related to Windows Update and decide to uninstall MSE and replace it with McAfee, but it does not work.
any help and suggestions would be very appreciated.
Hello
Steps 2 to 6 to identify the program that is causing the problem if the clean boot solves the problem.
Try the procedure described in the following article to improve your computer's performance.
Optimize Windows 7 for better performance.
http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance
Ways to improve your computer's performance.
http://Windows.Microsoft.com/en-us/Windows7/ways-to-improve-your-computers-performance
-
Hello!
I installed Win Live Movie Maker, but when I tried to open my .mswmm file I only got this message: "sorry, Move Maker cannot open this project file. The file is not compatible with Windows Live Movie Maker or damaged. Please select a different project file. "The file will open correctly in Windows Live Movie Maker 7, so everything should be OK. What I am doing wrong?Hello
This is supported in Windows Live movie maker file type.
For any request or problems related to Windows Live Movie maker, please post to the Windows Live Help forum.
Here is the link: http://www.windowslivehelp.com/product.aspx?productid=5
Diana
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Microsoft Picture It! 2001 will not be installed on my computer. The installation program detects that IE 5.5 installation is incomplete, but I have IE 8. I'm running Windows XP Version 2002 SP 3.
My hard drive has been replaced and I can't reinstall Picture It! program.
Microsoft Picture It! 2001 will not be installed on my computer. The installation program detects that IE 5.5 installation is incomplete, but I have IE 8. I'm running Windows XP Version 2002 SP 3.
My hard drive has been replaced and I can't reinstall Picture It! program.
======================================
You may need to go back to IE6 so that PI2001 to install. Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *. -
I've upgraded to a replacement hard drive, but Windows Update won't work now. Everything else seems OK.
The error is: "Windows Update cannot currently check for updates, because the service is not running." You may have to restart your computer.
I restarted the computer a couple of times and in respect of the Services runs it the Windows Update service.
Operating system is Vista 64 bit.
Original title: Windows Update
I've upgraded to a replacement hard drive, but Windows Update won't work now. Everything else seems OK.
The error is: "Windows Update cannot currently check for updates, because the service is not running." You may have to restart your computer.
I restarted the computer a couple of times and in respect of the Services runs it the Windows Update service.
Operating system is Vista 64 bit.
After the upgrade to the bigger hard disk, I found that the technology Intel Rapid Storage Technology driver should be updated. Once this is done Windows update ran properly. Microsoft Fixit did not help in this circumstance.
-
I m trying to install first pro, but beside the page to inform that the download is in progress, nothing happens. The page remains with the message... that.
You MUST have a 64-bit computer and operating system... What is your computer?
-http://windows.microsoft.com/en-AU/windows7/find-out-32-or-64-bit
-
Hello! so I create a character with long hair, but the thing is it attached on the face and body, cannot move/dangle by itself. and the eyebrows can not move
For groups or layers Warp independently of their parent group, add a "+" to the beginning of the name of the layer in PS / HAVE. It's the same select group in the Panel of puppets and by checking the Warp option independently in the properties panel.
Once a group is warping independently, it will be attached to its origin at the origin of the group from its parent by default. You can join a different handful in the parent using the fix to the popup in the properties panel. In Preview 3, if you want to move the origin, you need to do in PS / HAVE. In future releases, you will be able to change the origin directly in the Panel of the puppet.
If this doesn't solve your problem, you can post a screenshot of the hierarchy of layer here, to see if there is another structural problem.
-
I am installing 13 items and get the installer could not initialize error... on mac...
Please follow the steps in Photoshop elements 13 will not install & check if it helps you.
Concerning
Stéphane
-
I bought and installed Photoshop elements 13. The program does not open but says I have to register on my Adobe ID that I have. Then, I get a box saying I'm not online or my computor clock is out of adjustment. The clock is correct for the time being, and I am on the line what should I do?
See the link below:
Photoshop elements 13 - can't get a response code in the offline activation method
-
I'm on PC Win 7 and bought, downloaded and installed Lightroom 6 the day it was released. When he downloaded and installed it seems to be the version CC, not the LR6. I entered my license number and it works on my computer, but there CC Adobe on my desk and I don't want that on my computer. How can I remove the Adobe CC from my computer and still have 6 installed Lightroom and working?
If you are unable to remove Adobe Creative cloud Control Panel, see link below:
-
Whenever I try to update Acrobat XI version 11.0.07 I get the error message: "the update could not be applied because Adobe Application Manager is running." Please close Adobe Application Manager and look for updates again. »
This happened for months and still fails in the same way.
You can download Acrobat pro XI of the same link:
Maybe you are looking for
-
Upgrade to version 20 broke all bookmarks and URL address bar
Since I updated Firefox to v19 to v20, the program is not responding when I click on any bookmark or manually enter a web address in the URL address bar. It does not expire waiting for a connection, and there is no "connecting to" message in the stat
-
How can I transfer Firefox bookmarks on computers with a DVD?
I have just built a new computer and I do not know how to transfer all my favorite Firefox from my old computer to my new. The old computer works, but the only way I have to connect the two is through a CD, DVD or external hard drive. Therefore, to t
-
I used the file and Settings Transfer Wizard...
.. before reinstalling the OS to the factory settings on my Dell XPS 420. When I tried to reinstall parameters, etc., everything was recovered, but my Outlook *.pst and so all my emails, settings account and contacts. I tried to re - import this data
-
Hello How can I reduce the frequency at which these emails come out? I get hundreds a day. [Fatal] Use of memory on a machine virtual [ComputerName] has reached 96% of the memory that ESX has granted it. The following URL to obtain details of the al