Oracle DB and number of processors

Similar Questions

• What is the number of processors and maximum memory options in MSCONFIG?

  MSCONFIG (START)... Who can tell me what that? !!
   
  http://www.HTPC-reviews.com/wp-content/uploads/2012/08/speedup_windows7.jpg

  This photo... It's the MSCONFIG window

  64-bit Windows 7

  who can tell me what is 'exactly' the real role of:

  -Number of processors
  -Maximum memory

  because

  I have i7 with 8 processors and when I chose (number of processors) 8 processors, that nothing has changed! It's same as 0.
  and I have 6 GB of ram and when I chose (maximum memory) = 6 GB, nothing has changed, but became 5 GB in the Task Manager!

  What is - c!

  can someone help me please!

   
  Hello
   
  These options to limit the use of processors and memory to the specified value. If you want windows to use all available processors and memory, you must leave two options not controlled.
  When the number of processors option is set to zero, Windows will use all available processors.
  If you recently changed the processors, this may help: http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/howto-get-windows-7-to-detect-your-new-multi-core/71519d51-f6cb-47df-b3ff-66c2928d6de4
   
   

  Hope this information is useful.

• PowerCLI - get the number of cores per processor and number of Sockets

  Greetings,

  We are responsible to give a list of all our virtual machines with their host name, the number of CPUs, the BONES and the number of cores per processor for verification.

  I immediately said that this would not be a problem with PowerCLI. However I seem to have more trouble with it than expected.

  Get the number of CPUS is not a problem, but the time wherever I want to divide the number of cores and the number of sockets, it seems to hit a dead end.

  I found the following entries of the community concerned:

  Re: vSphere 5. Casings of vCPU and cores per CPU (PowerCLI) bug

  Machine virtual access avancΘs | VMware vSphere Blog - VMware Blogs

  Parameters to retrieve and set Advanced Configuration (VMX) VM

  But neither seemed to give me the right input. The advanced configuration settings do not appear to contain the number of cores/sockets and Get-View and Get - VM normal controls do not seem to differentiate between carrots and the power outlets and just give the number of processors.

  Because we need these settings for a check I doubt I'm the first to need this information. Does anyone have an idea how to get this information?

  Please note that it is the number of cores and casings of a VM, not an ESXi host.

  Thanks in advance,

  Bram

  	$result = @)
  	$vms = get - view - ViewType VirtualMachine
  	{foreach ($vm to $vms)
  	$obj = new-object psobject
  	$obj | Add-Member - MemberType NoteProperty-name name - value $vm. Name
  	$obj | Add-Member - MemberType NoteProperty - name CPUSocket-$vm.config.hardware.NumCPU value
  	$obj | Add-Member - MemberType NoteProperty - name Corepersocket-$vm.config.hardware.NumCoresPerSocket value
  	$result += $obj
  	}
  	$result

• VMware vSphere 4 licenses essential question and the number of processors

  Hi all

  I have a question about the Essentials of VMware vSphere 4.1 license. We have a client interested in a VMware vSphere Essentials license. The machine runs on 2 x processor Xeon 5675 6 c. Now I read somewhere that there was a limitation of the number of processors that can be used with the edition of Essentials. If I remember correctly, the number of physical sockets is limited to 2, but I remember that there is another limit, but I could not find the document describing and wonder:

  Is there a limitation on the maximum number of 4 cores on one physical processor that can or will be used by VMware vSphere 4.1 Essentials or there is a limitation on the number of 4 vCPU that can be assigned to a guest?

  I would like to know because if this is a limitation on the number of vCPU that can be assigned to a customer that would not be a problem because we have no guests in need of vCPU, then 2 more, but if this is a limitation on the number of cores that would be used by VMware vSphere Essentials, it would be a waste of money to buy a 6-Core ;-)

  Hello.

  2 taken with 3 guests, 6 hearts and SMP 4 lanes for virtual machines.

  These limitations are available at: http://www.vmware.com/products/vsphere/buy/small_business_editions_comparison.html

  Good luck!

• Number of processors and hardware migration

  2 questions:

  I saw this tutorial on how to clone virtual machines for copying just in browser store data and add it to the inventory again.

  Is - this kosher? can it cause problems? Its a freebsd AMD64 bit installation 9.

  Also, is it safe move a virtual machine like that of a desktop computer hp with a core2duo on a hp dl360 xeon?

  And finally, these two machines are quad-cores; should I set the number of virtual processors in vsphere 4 or leave at 1?

  You have to look at what resources they each need, certainly if the production needs of the processing power of 2 vCPUs then giving it 2 and splitting the two other the dev and the sandbox would probably be best. If the capacity of the pre implementation planning is not possible start us with 1 vCPU by machine in our environments and increase if needed.

  The majority of virtual machines, I've worked on that have been very well when the scaling vertically with the number of processors, but as I said, it's especially windows and red hat. This message speaks to the situation for Windows Server 2003, but I imagine that there will be some similarities. http://communities.VMware.com/thread/29415

  I think you really need to test, to perhaps build a single vCPU system. From a 4 to a vCPU 2 should be good because they will always use a multiprocessor driver.

  I hope this helps!

• How to change the number of processors / cores

  I have virtual machines that I have to move periodically between 3 computers main host that I use:

  1 Intel Core 2 Quad CPU with Windows 7 Home Premium 64 - bit - 1 processor with 4 cores

  2 Intel Core i7-2630QM CPU with Windows 7 Home Premium 64 bit - 1 processor with 4 cores

  3 Intel Core 2 Duo T7700 CPU VT with Windows XP 64 bits - 1 processor with 2 hearts

  Hosts running VMWare workstation 7.

  Most of my virtual machines running XP 32 bit and have been initially created for my 3 platform.

  When I move my machines between computers I see that the parameters of the Virtual Machine for my change of processor in (for me)
  in unpredictable ways. Sometimes it shows 1 processor and gives me a choice of up to 4 cores.
  in other cases (always on a 4 base platform) 1 single processor with 1 core, in other cases, with 1 core 2 processors.

  In most cases, my freedom of choice is limited, because the selection of the number of cores is grayed out.

  When I try to make changes by editing the vmx file, I find them ineffective (no change).

  The other problem I think is that my VMs run VERY SLOWLY on my i7 with 8 GB platform!
  I have no idea if this is related to the improper setting of the number of processores / cores (I'm not able to define
  1-4-hearts and spin with settingsd 1.1 instead).

  Could someone please help me understand how:

  1. check / change the number of processors / threads on an existing virtual machine.

  2. how to set properly for an i7 processor

  Thanks in advance,

  Andrew

  1. providers that create virtual machines are in a race - they assume that customers use this version which proposes to use the virtual processors more ;-)
  For some workloads inside a virtual machine - say Oracle or other database and applications servers such that it is sometimes really good idea to use more than one virtual processor

  2. virtual machines to scale differently with more CPU than the real computers.
  Virtual machines are for host applications.
  This means that the host schedules the time CPU to each virtual machine.
  If you follow this thought that you will see that a virtual machine that uses one virtual processor has a greater chance to run then a VM with 2 virtual processors.
  A VM with 4 cores running on a host with 4 cores will spend a lot of wait time - it may work only when the host reports the application of Workstation 4 hearts are available.

  A virtual machine with only 1 vCPU will probably be able to run all the time without any waiting time.
  This is why usually with a single CPU VMs feel better to the needs of the user.

  This translates into the best practical advice: assign a CPU unless you really notice you need more.

  3. probably, you try to change the values, while the virtual machine is suspended?

  4.
  numvcpus = '8 '.
  cpuid.coresPerSocket = "4".

  We hear two processors with 4 cores of each

  numvcpus = "4".
  cpuid.coresPerSocket = "4".

  means a processors with 4 cores

  numvcpus = '2 '.
  cpuid.coresPerSocket = '1 '.

  We hear two processors with a carrot

  No effect? n ' mind that not all clients can use 2 or more processors
  For example, XP is limited in this respect.
  Some guests may also not change the number of CPUS after what they have been installed

• What mobile framework Oracle version and JDeveloper are needed to customize the Oracle EBS R12.2.2 and superior?

  What mobile framework Oracle version and JDeveloper are needed to customize the Oracle EBS R12.2.2 and superior?

  If you want to extend the pages of EBS, you need to use the OA framework for 12.2 version.  There is no native support for the extension of EBS by using ADF pages.

  If you want to build the ADF custom applications that integrate with EBS you can watch using the SDK of the EBS (see My Oracle Support) that offers a number of design patterns to allow you to do.

  With respect to the version of Fusion Middleware based on EBS 12.2, take a look at the notes 1911660.1.  11.1.1.6 is currently the base version supplied with 12.2.4 with the 11.1.1.7 version is the highest version supported.

• Cannot change the number of processors present on the drive

  Hello

  I am a new user but have searched the forums and FAQS and can't find the answer.

  I have VMWare Workstation Player version 12 for Linux.  Host is 23 Fedora on a processor quad-core i5 with 8 GB of RAM.  Guest operating system is Windows 7.  It's for personal use, so I don't have a license key.

  The question I have, is that several parameters is not editable, especially the number of processors. The selection is grayed out and set to 1.  In addition, the hard drive and display settings (graphics card) cannot be changed either.

  I tried both with the virtual machine off and with it works.  Doesn't make a difference, the settings are grayed out.

  I searched everywhere for an explanation, but have not found a clue.  Help, please!

  Thank you

  DW

  The settings are grayed out when:
  -the virtual machine is running
  -the virtual machine is suspended
  -l' virtual computer runs in background

  If poweroff the virtual machine with a full stop of the guest.
  If it still does not - check if you are the owner of the vmx file

• The components of Oracle Forms and reports refers specifically to the which components?

  Hello

  Could you help me with the following question.
  
  Our client uses the following documents to improve reports and forms Oracle 11 g Release 1 on Oracle Forms and reports 11g Release 2.
  
  http://docs.Oracle.com/CD/E38115_01/doc.111210/e23975/upgrade_from_r1.htm#BDJFHIEH
  Oracle® Fusion Middleware Upgrade Guide for Oracle Forms and reports
  11g Release 2 (11.1.2.1)
  E23975-02 part number
  Upgrade-5,3 doing the Oracle Forms and reports 11 g Release 1 (11.1.1)
  ----------cut-----------
  Ensure that the destination Oracle instance and the destination Oracle WebLogic Server domain are running.
  
  To verify that the instance and domain are running, log on to Oracle Enterprise Manager Fusion Middleware control for the field and make sure that the managed servers and components Oracle Forms and reports are running.
  ----------cut-----------
  On the above documents, our client has a question.
  
  [Question]
  The components of Oracle Forms and reports refers specifically to the which components?
  (Or need to check what components are running?)
  
  Please give me some advice.
  
  Best regards
  
  David

  For Windows, you can use the command line or shortcuts in Windows that are created for you.  In the case of OPMN under Windows, a Windows Service is created.  Information on the power on/off is in the documentation of the product here:

  http://docs.Oracle.com/CD/E23943_01/Web.1111/e13708/TOC.htm

  http://docs.Oracle.com/CD/E23943_01/Web.1111/e13740/starting_nodemgr.htm

• Oracle VM, need to 32 processors - sockets & core by the socket parameter

  Hello

  I need to configure a machine virtual oracle. My hypervisor took 2 & 8 hearts.

  Oracle leans on number of cores do anything. (I know)

  What would be ideal, I can present the vm with # socket & # of cores per socket?

  My understanding is I should select 1 plug & give 32 cores per socket for better NUMA.

  Thank you.

  By default, that don't want to give him 32 1 core Sockets a socket. This will allow the ESXi host expose the underlying NUMBER at the prompt

  But your host is only 16 cores, why would you want to assign 32? I know you probably have hyperthreading but award 32 will tell the virtual machine, there 32 'full' hearts and you can see performance isn't all that good.

• Cannot convert oracle.jbo.domain.Number to class the class java.lang.Long in EL

  I have this error:

  ViewId treatment < UIXRegion > < _warn > error: / frameworks-designer-task-flow/hand URI: FrameworksDesignerMain.jsff real-URI: EnterpriseProcessExecutionSchedules.jsff.

  java.lang.IllegalArgumentException: cannot convert 2 type class to class java.lang.Long oracle.jbo.domain.Number

  at com.sun.el.lang.ELSupport.coerceToNumber (unknown Source)

  at com.sun.el.lang.ELSupport.equals (unknown Source)

  at com.sun.el.parser.AstNotEqual.getValue (unknown Source)

  at com.sun.el.ValueExpressionImpl.getValue (unknown Source)

  at org.apache.myfaces.trinidad.bean.FacesBeanImpl.getProperty(FacesBeanImpl.java:73)

  to oracle.adfinternal.view.faces.renderkit.rich. LabeledInputRenderer.isDisabled (LabeledInputRenderer.java:285)

  My question is how do I find in my page jsff?  I see that it is on a property of disabled but I don't know which and there are many on this page.  I think it's one that looks like this: disabled = ' #{bindings. " "{PGSchedType.inputValue No 5}.  If my different EL expression?

  Thank you.

  Rudy

  JDev 11.1.2.4.0

  Hi Rudy,.

  I guess that you have spotted it right. Instead of 5 in your disabled property, use '5'

  
  

  I mean, just surround it with quotes like below
  

  
  

  disabled="#{bindings.PGSchedType.inputValue ne '5'}"
  

  Thank you

  SAIF

• java.lang.Integer cannot be cast to oracle.jbo.domain.Number

  Hello

  I use JDEV 11.1.2.1.0

  Here is my code

  Number _id;

  DCBindingContainer dcBindings = (DCBindingContainer) BindingContext.getCurrent () .getCurrentBindingsEntry ();

  DCIteratorBinding iterBind = (DCIteratorBinding) dcBindings.get ("IDView1Iterator");

  _id = (Number) iterBind.getCurrentRow () .getAttribute ("Id");

  It gives me the error

  java.lang.ClassCastException: java.lang.Integer cannot be cast to oracle.jbo.domain.Number

  I imported oracle.jbo.domain.Number.

  Please notify.

  Yes, but your Id attribute is of type java.lang.Integer, and try to throw him to oracle.jbo.domain.Number

  try to use following:

  Integer Id = (Integer) iterBind.getCurrentRow () .getAttribute ("Id");

  _id = new Number (Id.intValue ());

  997766 wrote:

  _id = (Number) iterBind.getCurrentRow () .getAttribute ("Id");

  It gives me the error

  java.lang.ClassCastException: java.lang.Integer cannot be cast to oracle.jbo.domain.Number

  I imported oracle.jbo.domain.Number.

  Please notify.

• Java.lang.Integer cannot be applied to oracle.jbo.domain.number

  Hi all
  
  Jdev Version: 11.1.2.3.0
  
  Platfor: Windows 7
  
  I'm trying to implement sequences and followed the following ADF essentials to create the same. For some strange reason, I meet, it throws the error of compilation as below.
  
  [http://download.oracle.com/otn_hosted_doc/jdeveloper/11gdemos/ADF_Insider_Essentials/ADFInsider_sequence/ADFInsider_sequence.html]
  
  Steps to follow:
  
  1. create the DepartmentsEO
  
  2. has generated the Impl class for departments with accessors and Create method
  
  I wrote the following lines in the method Impl to create files and get the error like setDepartmentId (java.lang.Integer) in eo model. DepartmentsImpl can not be applied to the (oracle.jbo.domain.number) *
  
  SequenceImpl Seq = new SequenceImpl("DEPARTMENTS_SEQ",getDBTransaction);
  setDepartmentId (seq.getSequenceNumber ()); *
  
  Please help me!
  
  Thank you

  Hello

  What Type of Map you selected when creating components trade?

  Make sure it is Oracle. Looks like you have selected the Type of card Java takes DepartmentId column as Integer.

  It takes so you must import the oracle.jbo.domain.Number class

  setDepartmentId (numeric value)

  Recommendation: Create business components again with card Type Oracle.

• Windows Server 2008 R2 and hot add processors

  I am running Windows Server 2008 R2 (64-bit) OS invited under the latest version of vSphere 4 / ESXi and want hot add processors.  When I go to change the settings for the virtual machine, the CPU area is grayed out, so I can't change the number of processors.  What should I do to make this possible?

  Thank you

  -John

  If virtual hardware version is 7 and the operating system you have configured for the virtual computer supported taken add/hot hot you can enable this feature in the settings of the virtual machine, while the virtual machine is turned off. It is located in the Options tab under 'Advanced'-> ' memory/CPU Hotplug. "

  André

• Can I do a guest who sees 2 physical and logical 4 processors? (i.e. dual-core)

  I have several dual socket, dual-core PE2950s running ESXi 3.5.  I started to migrate to ESXi 4 on a Dell R900, wall 6-hearts.  I have only one application (InDesign Server) under Win2003 which is licensed per CPU; on the PE2950s, when I assigned 4 virtual CPUs, the app saw 2 physical and logical 4 processors.  This allowed the program to run, he's looking for "2 CPUs" and I'm assuming that he studied the logical number of CPUS, but he treated 4 concurrent threads, one on each core (this is how it is supposed to work).   However, when I moved the virtual machine to the R900 and awarded 4 vCPUs, she saw 4 logic and physics 4, and the app has refused to run.  I can assign 2 vCPUs, but then it will try to launch the 2 threads by heart, to me give only half the speed.

  So the question is, can I have the VM guest to see a CPU "dual core"?  If I assign 2 dual-core processors, it would solve my problem.  Thank you!

  Hello, please see the following page for a solution to your problem

  http://www.yellow-bricks.com/2009/06/04/per-processor-licenses-for-your-application/

  If you have found this information useful please consider giving points and or the marker said.

  See you soon

  Kevin