Oracle Golden Gate

Hello

I maintain a database for a very small app using oracle. But now I want to maintain a different database that is the exact replicated data from my original database and this replication can't happen in real time (two databases oracle). I had a few questions in this regard,

1 - golden gate/oracle oracle workflow will be used and why one over the other.
2 - is the minimum bandwidth required to ensure this replication
3 - If the Golden Gate is the answer, how should account required to my situation I go about setting up golden gate?

I do not understand oracle, but I'm not an expert. However all entries in this respect even if it should be at the level of experts is truly appreciated.

Concerning

AJ

Hello

1 - golden gate/oracle oracle workflow will be used and why one over the other.

Yes, both of which can serve your purpose. River is the part of Oracle database itself and it also serves other than replication. Golden gate was not a product Oracle that it was recently acquired by Oracle and it works on heterogeneous platforms, so both can serve you, but both have a lot of different things and have different purposes as well.

2 - is the minimum bandwidth required to ensure this replication

Depends on the amount of data you are replicating. Since your application is quite small, so I think that the normal Ethernet network should be good for you.

3 - If the Golden Gate is the answer, how should account required to my situation I go about setting up golden gate?

It's a very long history and can be summed up in this forum. You should take a look at the documentation to this effect.

http://www.Oracle.com/technetwork/middleware/GoldenGate/documentation/index.html

Salman

Tags: Database

Similar Questions

Installing Oracle Golden Gate
Hello

Where I ger the configuration for Oracle Golden Gate.

I want to set up the Golden Gate for Oracle for Oracle, SQL for Oracle

unidirectional and bi-directional

Thank you
You can go through several lessons Oracle Learning Library here:
http://Apex.Oracle.com/pls/Apex/f?p=44785:2:1926170455343282:FORCE_QUERY:2, CIR, RIR:P2_TAGS:Goldengate

Migration of Oracle Golden Gate
Hi guys,.

I do the migration of 9i and 10g using Oracle Golden Gate. I met some errors like

GGS WARNING 218
GGS WARNING 222

I use HANDLECOLLISIONS to resolve this error, but in doing so, the updates are run as duplicates.
In the source table, there is no unique key constraint and therefore the target.

Is there a way I get a solution to this problem.
I use HANDLECOLLISIONS to resolve this error, but in doing so, the updates are run as duplicates.

More difficult to understand what that means, I do not see update errors, which would be general ora - 1403 any data available.

In the source table, there is no unique key constraint and therefore the target.

But more specifically, you get a unique constraint violation:

ORA-00001: unique constraint (PERFSTAT. His STATS$ SQLTEXT_PK) have violated).

Your information seems to conflict itself. You will not have a full understanding of the concepts then I suggest you dive a little deeper into the docs and please pay special attention to the use of atCSN/afterCSN. Additionally, make sure that you start the extract CDC FRONT to your exp [dp] xxx = flashback_scn.

Good luck
-joe

Oracle Golden Gate fail to start extract and reproduce the process
Hello

I am trying to set up Golden Gate, but I'm running into the following errors during Setup. Any help is appreciated. Below is the content of the configuration.

Thank you
JT

ggssci > edit params mgr
PORT 7809
Ggs_owner username, PASSWORD ggs_owner
PURGEOLDEXTRACTS/u01/app/oracle/ggs/dirdat/ex, USECHECKPOINTS

ggsci > edit params ext1
-extract the Group-
extract ext1
-connection to the database.
ggs_owner username, password ggs_owner
-hostname and port for trail-
rmthost 192.168.2.111, mgrport 7809
-path and trail name.
rmttrail/u01/app/oracle/ggs/dirdat/lt
Support - DDL
DDL INCLUDE ALL
DDL are mapped objname SCOTT.*;
-DML
table SCOTT.*;
table SCOTT. EMP;
table SCOTT. DEPT;
table SCOTT. SALGRADE;
table SCOTT. BONUS;

GGSCI (ggsrc.localdomain) 12 > view report ext1

***********************************************************************
Oracle GoldenGate Capture for Oracle
Version 11.1.1.1 OGGCORE_11.1.1_PLATFORMS_110421.2040
Linux, x 86, 32-bit (optimized), Oracle 11 g on April 30, 2011 22:35:14

Copyright (C) 1995, 2011, Oracle and/or its affiliates. All rights reserved.

From 2011-08-18 14:17:50
***********************************************************************

Version of the operating system:
Linux
Version #1 SMP Thu Mar 15 19:57:35 EDT 2007, exit 2.6.18 - 8.el5
Node: ggsrc.localdomain
Machine: i686
limit software
Address space size: unlimited unlimited
Heap size: unlimited unlimited
File size: unlimited unlimited
Time CPU: unlimited unlimited

Process ID: 3408

Description:

***********************************************************************
* In the course of a run with the following parameters *.
***********************************************************************
-extract the Group-

Context of the source:
SourceModule: [er.main]
SourceID: [/ scratch/sganti/view_storage/sganti_core_lin32/oggc]
ore/OpenSys/src/app/er/rep.c]
SourceFunction: [get_infile_params]
SourceLine: [12245]
ThreadBacktrace: [7] elements
: [/ u01/app/oracle/ggs/extract (CMessageContext::AddThr]
[eadContext () + 0 x 26) [0 x 8289366]]
: [/ u01/app/oracle/ggs/extract (CMessageFactory::Create]
(Message (CSourceContext *, unsigned int,...) + 0 x 817) [0x827fae7]]
: [/ u01/app/oracle/ggs/extract (_MSG_ERR_STARTUP_PARAME]
RROR_ERRORTEXT (CSourceContext *, const char *, CMessageFactory::MessageDisposition)
[() + 0 x 81) [0x822fc81]]
: [u01/app/oracle/ggs/extract [0x814e4c4]]
: [u01/app/oracle/ggs/extract(main+0x1dc) [0x81529cc]
]
: [lib/libc.so.6(__libc_start_main+0xdc) [0xa0adec]]
: [/ u01/app/oracle/ggs/extract(__gxx_personality_v0+0x)]
1C5) [0 x 8120491]]

2011-08-18 14:17:50 parameter ERROR-OGG-00303 unrecognized (-excerpt).

2011-08-18 14:17:50 ERROR OGG-01668 PROCESS ABENDING.

GGSCI (ggsrc.localdomain) 15 > news

Lag time since Chkpt program status group

MANAGER RUNNING
EXTRACT STOPPED EXT1 00:00:00 00:07:32

GGSCI (ggtrgt.localdomain) 2 > Info

Lag time since Chkpt program status group

MANAGER RUNNING
REPLICAT REP1 00:00:00 BY-LAW 00:10:23

GGSCI (ggtrgt.localdomain) 3 > start replicat rep1

Sending START request manager of...
REPLICAT REP1 from

GGSCI (ggtrgt.localdomain) 4 > news

Lag time since Chkpt program status group

MANAGER RUNNING
REPLICAT REP1 00:00:00 BY-LAW 00:15:22

GGSCI (ggtrgt.localdomain) 5 > view report rep1

***********************************************************************
Oracle GoldenGate for Oracle delivery
Version 11.1.1.1 OGGCORE_11.1.1_PLATFORMS_110421.2040
Linux, x 86, 32-bit (optimized), Oracle 11 g on April 30, 2011 22:40:44

Copyright (C) 1995, 2011, Oracle and/or its affiliates. All rights reserved.

From 2011-08-18 14:22:08
***********************************************************************

Version of the operating system:
Linux
Version #1 SMP Thu Mar 15 19:57:35 EDT 2007, exit 2.6.18 - 8.el5
Node: ggtrgt.localdomain
Machine: i686
limit software
Address space size: unlimited unlimited
Heap size: unlimited unlimited
File size: unlimited unlimited
Time CPU: unlimited unlimited

Process ID: 4095

Description:

***********************************************************************
* In the course of a run with the following parameters *.
***********************************************************************
-connection to database target-

Context of the source:
SourceModule: [ggdb.ora.db]
SourceID: [/ scratch/sganti/view_storage/sganti_core_lin32/oggc]
ore/OpenSys/src/gglib/ggdbora/dboci.c]
SourceFunction: [odbc_param]
SourceLine: [1220]
ThreadBacktrace: [8] elements
: [/ u01/app/oracle/ggs/replicat (CMessageContext::AddTh]
[readContext () + 0 x 26) [0x820fa26]]
: [/ u01/app/oracle/ggs/replicat (CMessageFactory::Creat]
(eMessage (CSourceContext *, unsigned int,...) + 0 x 817) [0x82061a7]]
: [/ u01/app/oracle/ggs/replicat (_MSG_ERR_STARTUP_PARAM]
_UNRECOGNIZED (CSourceContext *, const char *, CMessageFactory::MessageDisposition)
(+0x7E) [0x81a7b6e]]
: [/ u01/app/oracle/ggs/replicat (odbc_param (char *, char))]
[*) + 0xc25) [0 x 8182475]]
: [u01/app/oracle/ggs/replicat [0x812ec26]]
: [/ u01/app/oracle/ggs/replicat(main+0x1a1) [0x8135bb1]
]]
: [lib/libc.so.6(__libc_start_main+0xdc) [0x71a1dec]]
: [/ u01/app/oracle/ggs/replicat(__gxx_personality_v0+0)]
x1b5) [0 x 8112991]]

2011-08-18 14:22:08 parameter ERROR-OGG-00014 unrecognized:-target. PARAMETERS
amplifier could be misspelled or not supported.

2011-08-18 14:22:08 ERROR OGG-01668 PROCESS ABENDING.

GGSCI (ggtrgt.localdomain) 6 >
Commented lines are two hyphens, not one.

Also, if you use scott.star, so why the list of other tables that would already be included by wildcards?

Urgent help is needed--Replicat is running, but no replication has been done to the Oracle Golden Gate.

Use 2 excerpts, he worked throughout the process pump & replicate data but just one hour back, he wasn't the replication...
I could see the State of extracts, data pumps and replicates as running. In the machine 1, I 2 extracts & datapumps of 2 data running in the machine 2, I 2 replicates are running.
When I do the ext lhrdev1 stats he showed the no. of records inserted, updated, deleted while that for the same snippet of lhrdev1 nothing displayed when I do rhrdev1 (replicat) stats in the target machine.
Can someone help me solve this upward.
================================================================================
Source system
================================================================================
EXTRACT LHRDEV1
ID USER, PASSWORD GGS GGS
EXTTRAIL E:\Oracle_GoldenGate\V22232-01\dirdat\L1
DDL ARE MAPPED
-DDLOPTIONS REPORT
DDLOPTIONS ADDTRANDATA
-This report
-REPORT AT 08:00
-REPORTCOUNT ALL 60 MINUTES, PRICE
-REPORTROLLOVER AT 08:00 ON MONDAY
-file of rejection is to follow the error
DISCARDFILE E:\Oracle_Goldengate\V22232-01\dirchk\OGGdiscard1.dsc, APPEND, MO 50
TABLE HR. REGIONS;
TABLE HR. COUNTRY;
TABLE HR. LOCATIONS;
TABLE HR. DEPARTMENTS;
EXTRACT LHRDEV2
ID USER, PASSWORD GGS GGS
EXTTRAIL E:\Oracle_GoldenGate\V22232-01\dirdat\E2
DDL ARE MAPPED
-DDLOPTIONS REPORT
DDLOPTIONS ADDTRANDATA
DISCARDFILE E:\Oracle_Goldengate\V22232-01\dirchk\OGGdiscardE2.dsc, APPEND, MO 50
TABLE HR.JOBS;
TABLE HR. JOB_HISTORY;
TABLE HR. EMPLOYEES;
Data Pump - two pumps data configured
===========================================
-Data pump
EXTRACT PHRDEV1
-below passthru parameter to GG it would just move the data it
-are without required transformations
EXTRACT PHRDEV1
PASSTHRU
RMTHOST Alexander-PC, MGRPORT 7809
-RMTHOST 192.168.1.2, MGRPORT 7809
RMTTRAIL E:\GoldenGate\V22232-01\dirdat\P1,MEGABYTES 100
TABLE HR. REGIONS;
TABLE HR. COUNTRY;
TABLE HR. LOCATIONS;
TABLE HR. DEPARTMENTS;
-Data pump 2
EXTRACT PHRDEV2
GGS ID USER, PASSWORD ggs
-below passthru parameter to GG it would just move the data it
-are without required transformations
RMTHOST Alexander-PC, MGRPORT 7809
-RMTHOST 192.168.1.2, MGRPORT 7809
RMTTRAIL E:\GoldenGate\V22232-01\dirdat\P2, 100 MB
TABLE HR.JOBS;
TABLE HR. JOB_HISTORY;
TABLE HR. EMPLOYEES;
GGSCI (Françoise-PC) 18 > stats ext lhrdev1
Send request for STATS to LHRDEV1 EXTRACT...
Beginning of statistics to 2013-07-02 21:14:41.
DDL replication (for all tracks) statistics:
Lag time since Chkpt program status group
MANAGER RUNNING
EXCERPT FROM RUNNING LHRDEV1 00:00:00 00:00:00
EXCERPT FROM RUNNING LHRDEV2 00:00:00 00:00:00
EXCERPT FROM RUNNING PHRDEV1 00:00:00 00:00:00
EXCERPT FROM RUNNING PHRDEV2 00:00:00 00:00:02
Total statistics since startup extracted *.
Operations 0.00
Mapped operations 0.00
Unmapped operations 0.00
Other operations 0.00
Excluded transactions 0.00
E:\Oracle_GoldenGate\V22232-01\dirdat\L1 output:
Extraction of human resources. AREAS of HR. REGIONS:
Total statistics since 2013-07-02 21:02:05 *.
Total of 1.00 inserts
0.00 total updates
Total of 1.00 deletions
Total 0.00 releases
Total operations 2.00
Daily statistics for 2013-07-02 21:02:05 *.
Total of 1.00 inserts
0.00 total updates
Total of 1.00 deletions
Total 0.00 releases
Total operations 2.00
Hourly statistics for 2013-07-02 21:02:05 *.
Total of 1.00 inserts
0.00 total updates
Total of 1.00 deletions
Total 0.00 releases
Total operations 2.00
The most recent statistics from 2013-07-02 21:02:05 *.
Total of 1.00 inserts
0.00 total updates
Total of 1.00 deletions
Total 0.00 releases
Total operations 2.00
End of the statistics.
================================================================================
TARGET SYSTEM
================================================================================
REPLICAT RHRDEV1
ID USER, PASSWORD GGS GGS
-NOHANDLECOLLISIONS
AssumeTargetDefs
DDL INCLUDE ALL
DISCARDFILE E:\Goldengate\V22232-01\dirchk\OGGdiscardR1.dsc, APPEND, MO 50
Map of HR. REGIONS, target CF. REGIONS;
Map of HR. Target COUNTRY, CF. COUNTRY;
Map of HR. PLACES, target CF. LOCATIONS;
Map of HR. DEPARTMENTS, target CF. DEPARTMENTS;
REPLICAT RHRDEV2
ID USER, PASSWORD GGS GGS
AssumeTargetDefs
NOHANDLECOLLISIONS
DDL INCLUDE ALL
DEFAULT DDLERROR IGNORES RETRYOP
DISCARDFILE E:\Goldengate\V22232-01\dirchk\OGGdiscardR2.dsc, APPEND, MO 50
Map HR.JOBS, target HR.JOBS;
Map of HR. JOB_HISTORY, target CF. JOB_HISTORY;
Map of HR. EMPLOYEES, target HR. EMPLOYEES;
Lag time since Chkpt program status group
MANAGER RUNNING
REPLICAT RUNNING RHRDEV1 00:00:00 00:00:01
REPLICAT RUNNING RHRDEV2 00:00:00 00:00:06
GGSCI (Alexandre-PC) 16 > stats rhrdev1
Send request for STATS to REPLICAT RHRDEV1...
No cards active replication
DDL replication statistics:
GGSCI (Françoise-PC) 19 > all the news
Total statistics since replicat started *.
Operations 0.00
Mapped operations 0.00
Unmapped operations 0.00
Other operations 0.00
Excluded transactions 0.00
Errors 0.00
Retries 0.00 errors
Discarded 0.00 errors
0.00 ignored errors
GGSCI (Alexandre-PC) 17 >

Action of the host:

This message has been moved from the General Questions of the database space,

the location of GoldenGate, for better alignment of the section.

Tips:

There is no "Urgent" in these community user forums.

People will respond if they choose to.

There is no obligation that there is always a response to the request of a person.

If you have a problem in a critical business need, use your credentials to service contract and contact the company directly connect a support request ticket.

Error Oracle Golden Gate # 190
Hi all

I get below error in one of the files report goldengate to the extraction process:

2010-03-11 02:43:21 GGS ERROR 190, no additional record minimum is enabled. This can cause extraction process manage the key update incorrectly if key colu
MN is not in the first part of the line.

2010-03-11 02:43:21 GGS ERROR 190 PROCESS ABENDING.

No idea how to solve this problem?

Thank you
Onkar
I was expecting to help but no worries. I found the solution. Here, someone might need it.

Cause: An additional connection is not enabled in the database, and so we must allow it.
Solution: Check if the additional connection is activated or not use stated below:

SQL > select SLDM SUPPLEMENTAL_LOG_DATA_MIN SUPPLEMENTAL_LOG_DATA_PK SLP, SLU SUPPLEMENTAL_LOG_DATA_UI, FL FORCE_LOGGING of database v$.

If the result is something like this:

LTC SLP SLU FL
--- --- --- ---
NO NO NO NO

This means that its not active. activate it using below statement:

SQL > ALTER DATABASE ADD ADDITIONAL LOG DATA;

This change to add additional logging will not take effect until the current redo log is passed, so must also run the following command:

SQL > ALTER SYSTEM SWITCH LOGFILE;

Note: you must have the ALTER DATABASE & ALTER SYSTEM privilege to perform above activities.

Once this is done, you can very well come back and start your GG extraction process.

See you soon

Onkar

Published by: Onkar on March 11, 2010 02:22

Golden Gate a Table of Siebel Oracle replication
Hi all
GG version 11.1.1.1
the Oracle source: 9.2.0.6
Oracle target: 10.2.0.4

We intend to implement Oracle Golden Gate for replication in real-time for Siebel database (source).
so, I have a few questions before implementing it.
(1) allow to say my name of the table is S_ASSET and have 290 columns and require only 100 columns in target database, so it is possible to replicate?
(2) for the first charge, I creates a target with 100 columns table, and then will do the full replication of the table (100 columns) via INSERT add link DB... in this case
Let say my source table is to have 100 records, so I reproduced all the 100 records from the source to the target link db as initial charge... so now I'll start my extracted processs... .so how GG knows he should choose among 101 record...? or we need to talk about any parameter explicitly... ?

For the initial charge, we expect export/import or insert Add... so after the initial load, how gg knows next record to pick up... ???
(3) if I want to play my source to destination data replicaition every 2 hours once... then how to talk about this lag...?

Can some one please help me...
Thank you very much
KVM
Basically. The four steps in various locations include:

1. prepare the environment
2 configure the modified capture (excerpt), which can be started if simultaneous DML will take place during the initial load; otherwise you can start after load
3. perform the loading initial, so while takes place, your snippet is the capture of changes, those who will be expected to apply
4 set up the discount of the change (replicate), which includes the start

If you have changes during the initial loading window / calendar, consider using the HANDLECOLLISIONS parameter.

Topology of Golden Gate

Hello
I need your help to understand the topology to use for my new setup of the Golden Gate. I need to have active replication on my 11.2.0.3 bases (2) in Linux environment but topology seems to much complex. Please help answer following questions. I have installed oracle golden gate and management available latest pack
1. I understand that I must install Golden Gate on both servers of databases.
2 I need to configure replication using GUI, what I have to install Director of the Golden Gate Bridge to set up the replication or there is a graphical interface with normal installation of Golden Gate, which I would install my two nodes?
3 golden Gate Director should it merge first middle ware to install?
4. is this average fusion dishes must also have an oracle database must be installed?
5. can I have this door Director of gold installed on one of the server of databases or would I need on a separate server.
6. on the Golden Gate monitor server, can I install this monitor server on the same server as the Director of Golden Gate using the same database as the Director of the Golden Gate?
Thank you

1. I understand that I must install Golden Gate on both servers of databases.

-Yes, it is correct, however, it is out of available treatment. (It does not change the authorisation scheme, but it can be used to make it easier to install / implement). Thus, you can use a connection string in the connection (such as USER name, or ASMUSER) parameters and it will connect through SQL * Net. This can be used to apply data remotely. In the case of the snippet, you can use the mode of ALO in out area treatment, or you could use a Capture integrated downstream.

2 I need to configure replication using GUI, what I have to install Director of the Golden Gate Bridge to set up the replication or there is a graphical interface with normal installation of Golden Gate, which I would install my two nodes?

-This is part of the directory, Yes, that is part of the Oracle GoldenGate Management Pack.

3 golden Gate Director should it merge first middle ware to install?

-Now just webcenter and a data base for its small repository.

4. is this average fusion dishes must also have an oracle database must be installed?

-It can be Oracle, MySQL or even SQL Server.

5. can I have this door Director of gold installed on one of the server of databases or would I need on a separate server.

-It can be the source or target, or separated. There is no requirement that is difficult for the location of the repository.

6. on the Golden Gate monitor server, can I install this monitor server on the same server as the Director of Golden Gate using the same database as the Director of the Golden Gate?

-Yes, and he can use the same server database repository.

Nick

Golden gate Oracle compatibility
Hello

We are trying to decide on the use of the Golden Gate in our project, but I was not able to determine if our database and operating system is compatible and supported.

We have IBM DB2 UDB v.8 with Z/OS 1.11

I downloaded the Certification Matrix (http://www.oracle.com/technetwork/middleware/data-integration/goldengate1111-cert-matrix-349179.xls) and I have not seen any version of Z/OS, but I saw a few presentations that say that OGG can work in a Z/OS with DB2.

¿Anybody can help me to find information?
Thanks in advance.
Hello

1.
DB environment: IBM DB2 UDB v.8 with Z/OS 1.11

Oracle GoldenGate is ceritifed for use with DB2 on z/OS 1.11 8.1. You can download below mentioned either the OGG edelivery.oracle.com software and can install and configure and use for replication of data to homogeneous or hetrogenous environments.

a. Oracle GoldenGate V11.1.1.0.0 for DB2 8.1/9.1 64 bit on zOS 1.08/1.09/1.10/1.11
Package/Zip name: V22309-01
Construct the name: ggs_zOSV1R6_UDB81_32bit_v11_1_1_0_0_078

OR

b.Oracle GoldenGate V10.4.0.x for DB2 8.1/8.2 64 bit on zOS 1.06/1.07/1.08/1.09
Package/Zip name: V18173-01
Construct the name: ggs_zOSV1R6_UDB81_32bit_v10.4.0.19_002

Both versions are certified for use with DB2 v8.1 on z/OS 1.11

2.
Installation guide for DB2 z/OS and OGG can be downloaded at the bottom of the link.
http://download.Oracle.com/docs/CD/E18101_01/doc.1111e17796.pdf

Other OGG documentation can be downloaded at the bottom of the link.
http://download.Oracle.com/docs/CD/E18101_01/index.htm

Thank you & best regards
SK

Golden Gate 11 g replicate from MySQL to Oracle
Golden Gate 11 g for MySQL can read mysql binlog. I have a question, can I use GG11g for MySQL to replicate from MySQL to Oracle?

Thank and regard
OK, here's the official word from Oracle on it.

Oracle GoldenGate now supports MySQL 5.1.15 and later capture and oracle can be a target. Therefore, if you use MySQL 5.1.15 or later, you can indeed use Golden Gate to replicate from MySQL to Oracle when you use GoldenGate 11 g.

Difference between Oracle transparent gateway and Golden Gate
Hi guys

Could you please delete the confusion, what is the difference between the transparent bridge and Golden gate? they are same? In which cases of which one to use?

Thanks in advance
user8896122 wrote:
>
Satish Kandi says:
Transparent bridges are a mechanism of "interrogation" cross-RDBMS
>

If you mean if an application (designed to work with oracle only) can actually access SQL server or DB2 without any change. If I have a transparent gateway on top of DB2 or SQL Server?

You took me. I should have used different words.

Lol TG is a mechanism to query the other Oracle's RDBMS. GG is a mechanism for replication between any RDBMS.

Integration of Golden Gate with HDFS

Greetings,
I had difficulty getting the Golden Gate to work with Manager HDFS.
Basically, I want it to monitor changes to an Oracle Table propagate these changes to HDFS.
My current settings are
hdfs_ext.PRM
EXTRACT hdfs_ext
SetEnv (ORACLE_HOSTNAME = ' 10.0.0.4")
SetEnv (ORACLE_SERVICE_NAME = 'oracle')
Oracle username PASSWORD Xpand2015
SetEnv (GGS_USEREXIT_CONF = "dirprm/hdfs.props")
setEnv (GGS_JAVAUSEREXIT_CONF = "dirprm/hdfs.props")
GetEnv (PATH)
GetEnv (LD_LIBRARY_PATH)
GetEnv (JAVA_HOME)
SOURCEDEFS--./source.def
EXTTRAIL--./dirdat/aa
discardfile. / dirrpt/avro1.dsc, purge
DDL include all
LOGALLSUPCOLS
CUSEREXIT libggjava_ue.so CUSEREXIT PASSTHRU, INCLUDEUPDATEBEFORES, PARAMS ' / home/xpand/app/oracle/ogg_src/dirprm/hdfs.props '.
GETUPDATEBEFORES
SOURCECATALOG pdborcl
Oracle of the TABLE. A;
-----
HDFS.props
GG.handlerlist = HDFS
GG. Handler.HDFS.type = HDFS
gg.handler.hdfs.includeTokens = false
gg.handler.hdfs.maxFileSize = 1 g
gg.handler.hdfs.rootFilePath=/ogg
gg.handler.hdfs.fileRollInterval = 0
gg.handler.hdfs.inactivityRollInterval = 0
gg.handler.hdfs.fileSuffix = .txt
gg.handler.hdfs.partitionByTable = true
gg.handler.hdfs.rollOnMetadataChange = true
gg.handler.hdfs.authType = none
GG. Handler.HDFS.format = DelimitedText
gg.handler.hdfs.format.includeColumnNames = true
GG. Handler.HDFS.mode = TX
GoldenGate.UserExit.Timestamp = UTC
GoldenGate.UserExit.Writers = javawriter
javawriter.stats.display = true
javawriter.stats.Full = true
GG.log = log4j
GG.log.Level = trace
GG. Report.Time = 30 sec
GG.classpath=/Home/Xpand/app/Oracle/ogg_src/sites:/Home/Xpand/app/Oracle/ogg_src/Hadoop/lib/Hadoop-HDFS/*:/Home/Xpand/app/Oracle/ogg_src/Hadoop/lib/*:/Home/Xpand/app/Oracle/ogg_src/Hadoop/Jars/*
------
Contents of the dir/home/xpand/app/oracle/ogg_src/sites
Core - site.xml hdfs - site.xml ssl - client.xml ssl - server.xml
After the start of the hdfs_ext process, nothing ever gets propagated to the HDFS.
Here's the report typical https://www.dropbox.com/s/iyajf8begou90mz/HDFS_EXT.rpt?dl=0
Note: the oracle with Golden Gate and the machine with hdfs are in the same network to following address 10.0.0.4 and 10.0.0.5
Please notify.

Can you please list ggsci

> info ext1, detail

> info ext1, showch

> hdfs_ext info, detail

> hdfs_ext info, showch

Note that you can configure the adapter or bigdata extract to read a track OGG and one created by ext1 is fine.

You can create another excerpt if you like and do the same thing as hdfs, except the name. Then add ext hdfs_two, exttrail ./dirdat/xx

Yes do not put exttrail as the output of an ext hdfs hdfs.

Now if hdfs_two works, lift a SR. provide the results of the information and report as well as your test files.

See you soon

Gan Kee

Golden Gate

Hello
I want using Golden Gate for level schema oracle to oracle replication replication (any object in the indexes, tables, triggers, procedures of plan...)
I have a scheme called dds1, this scheme a lot of objects. Please guide me how to implement the initial load of this objects and then start the replication?
Please guide me step-by-step:
1. install the door gold on both sides.
2 ......
3......
4.....
Help, please.

Hello

Schema level replication means, all objects in the schema which is

configured for replication OGG, will be replicated from the source to the target.

including the procedures, functions, packages, etc. To do this, you must activate

DDL replication. DML replication will not satisfy this.

Once again for the DDL replication, you must use DDL ARE MAPPEES parameter in

extract and Replicat parameter files. This setting will capture and

replicate all the DDL operations located on the side of the Source for the

particular mapped schema.

For more details, please see the links below.,.

1 installation and Configuration of DML-

http://www.Oracle-SCN.com/installation-and-DML-replication-configuration-of-Oracle-GoldenGate-11g/

2. the DDL Configuration-

http://www.Oracle-SCN.com/DDL-replication-configuration-of-Oracle-GoldenGate-11g/

3. What is the initial load-

http://www.Oracle-SCN.com/GoldenGate-initial-load-techniques/

There are several types of Oracle GoldenGate initial charge and you can also use

EXPDP / IMPDP for synchronization at the start of the source and the target. But as objects

procedures, packages, functions, etc. must be initially created in the

side of the target.

Kind regards

Veera

We sat, September 11, 2015 at 9:32, community-admin

Golden Gate 12 c 1z1-447 will become available on view of scheduling? or is it passed through the beta process

Hello
Golden Gate 12 c 1z1-447 will become available on view of scheduling? or is it passed through the beta process.
I remember never 1z0 - 447 Oracle 12 c Golden Gate Essentials review be a review.
He has demonstrated lately on the oracle website.
but I don't see it on the site of the view.
I thought it was supposed to become available to plan August 8.
Roger

Looks like someone screwed up PV. When you click on the "View reviews" link on the main page of Oracle to PearsonVue 1Z1-447 appears under «Other reviews"rather than «beta reviews»

Golden Gate clean transport logs

Hi all
What transactions, log files, etc. do I need attention or cleanup (delete) periodically to avoid lots of disk space?
Just as the Archives of newspapers in database which grow fast and caused hang when not monitored, maintained and well managed.
Are there things in the Golden Gate? For example, if the database target is stopped for a long time or caused error not able to apply logs the cause of accumulation?
Thank you very much
JC

This is a documented method:

https://docs.Oracle.com/GoldenGate/1212/Gg-Winux/GWURF/gg_parameters122.htm#GWURF597

Kind regards

Bashar

Oracle Golden Gate

Similar Questions

Maybe you are looking for