Installation of the R 11.2 grid Infrastructure and RAC on AIX 7.1
By referring to:
Manual 'Oracle Grid Infrastructure -
"Installation Guide 11 g Release 2 (11.2) for AIX on POWER Systems (64-Bit).
E48294- 01
Chapter 2.7, "id Software".
requirements '.
Q: as prerequisites to IM and
Installation of RAC, we ABSOLUTELY NEED to have installed
-ADA (OC PowerAda 5.5 systems),
-Pro * Fortran (IBM XL Fortran v. 11.1 April)
2008 MFPS for AIX)
-Pro * COBOL and
-Oracle Messaging Gateway (IBM WebSphere MQ
V6.0.2.0)?
We wish to avoid
unnecessary scopes during this installation.
The overview of the project:
We run Oracle EBS R 12.1.3 on RDBMS
11.2.0.3 on AIX 6.1, simple installation of the enclosure.
Plan is a proof of concept and
migration/switch to: two new boxes AIX 7.1, install GI 11g R2, RAC and set up
OEBS to run in clustered environment. RDBMS and EBS will be cloned to
existing environment.
Thx a lot!
Tags: Database
Similar Questions
-
Oracle Grid Infrastructure and ASM Tech Supprot
Purchase given the Support of Oracle grid Infrastructure and ASM. Is there a site web/link I can go?Hello
ASM is part of the database. So you get the support with the RDBMS product.
Concerning
Sebastian -
I opened the game client for life despite the installation of the game stopped correctly and the game closes that I said?
Hello
What operating system do you use?
I suggest you to follow the links and check out them.
Method 1:
Problems installing and uninstalling programs on Windows computers
http://support.Microsoft.com/kb/2438651
Method 2:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
-
Revenant (installation of the Service Pack) Just restarts again and again
Recently tried to install SP2 from Windows Update.
Unfortunately, someone either shut down the computer during the installation or the laptop lost power etc.Now, I get the message "service not installed pack - reverting" formidable again and again and again. The system keeps restarting itself! I tried the standard startup repair, and there is no system restore points.
I even tried a sfc/scannow, but it shows a repair operation is in progress, and I have to reboot first.
Help?
Download the ISO on the provided link and do a repair of the disc.
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.
When you have changed that, insert the Bootable disk you did in the drive and reboot.
You can make a tool to restart system, System Restore, etc. with it.
Read all the info on the website on how to create and use it.
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
ISO Burner: http://www.snapfiles.com/get/active-isoburner.html
It's a very good Vista repair disc.
You can do a system restart tool, system, etc it restore.
There is not a disk of resettlement.
And the 32-bit is what normally comes on a computer, unless 64-bit.
See you soon.
Mick Murphy - Microsoft partner
-
RoboHelp 10 installation of the trial version arrives at 65% and stops
I tried to install Robohelp 10 demo on my laptop Dell of Win7 for about 4 hours now and it always stops at words on a full score of 65% (currently install AdobeHelp). I tried at least 4 times and it stops at the same place every time.
(1) I am running the program as administrator
(2) my system is Win7 (64 bit)
Any suggestions on how to fix this?
Thanks in advance
@Rave
Thanks for your post. Even if it does not solve the problem completely, the links you provided were invaluable for coming up with a viable solution. Here is what happened:
1. follow the above instructions to the letter.
2 retries install RoboHelp 10 trial.
3. the same results; Installation stopped at 65% (currently install AdobeHelp)
4. open Task Manager: RoboHelp 10 install application status: running
5. click on the tab process and process sorted on the CPU usage
6 noted that the process: install AdobeHelp * 32 used no cycles CPU for a long time (9 minutes).
7 cancellation the AdobeHelp install * 32 process.
8 installation is successful.
9. RoboHelp 10 program and it seems to work; Although, I really did anything with it.
Thank you, again.
-
BIOS recognizes and sea loads tools and again verified drive. XP disk loads up on the other computer, but does not enter the screen "" on new install
XP does just that.
I hope that you have a fairly new pc. Whatever it is, start pc, press the right key to enter
Reset the BIOS, 'Priority of Boot', defined for cdrom with cd of xp as the 1st set new hd as 2nd.
If the hd is IDE, SATA, then additional parameters must be defined (advanced chipset)
defined for SATA to work alone or work with IDE, (reading Guide).
times through in BIOS, save & exit. XP CD should start auto (the hd format) when xp cd
gives the possibility...
-
installation of the latest version of windows vista and pc crashes
I received an alert that there were new updates and install. Unfortunately for me, when I installed windows vista update, upgrade or whatever it is, it crashed my computer and now all I have is a blue screen and my computer tells me that my computer could not start and use the Recovery Manager? Even this does not work, it was 'restoration' for 24 hours
Windows Update Forum:
It comes with Vista, upgrade install and activate Forum.
You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:
http://social.answers.Microsoft.com/forums/en-us/vistawu/threads
When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.
In this way, you will receive the best help.
See you soon.
Mick Murphy - Microsoft partner
-
ORA-12547 TNS LOST during the 12 c dbca on grid infrastructure.
Hi all
In my test environment, I installed the 12.1.0.1 9 VMware and REDHAT 6.4grid infrastructure. After a successful installation of the grid infrastructure and database binary when I try to create the database with dbca, show me ORA-12547 TNS LOST.
Installation is 2 node grid infrastucture ASM on shared disk. Using binary grid and oracle grid and database users respectively.
I searched forum and METALINK also, I got a part the documents below.
1. doc ID 1069517.1 : it says to check the permissions on the files binary oracle as below. I thought it was ok.
- rwsr-s - x 1 184286251 9 August 16:25 /home/oracle/app/oracle/product/11.2/db/bin/oracle asmadmin oracle
2 many docs suggested to check libaio-*. rpm. I found that libaio x86_64 RPM is installed but libaio i686 rpms were missing. I installed them also.
But still, I get the error.
Please suggest.
Kind regards
Ashutosh Khare
After the installation of i686 libaio RPM, I also installed each package contained in the document.
After the installation of the packages reissue the binary grid with document below.
How to re-bind the Oracle Grid Infrastructure independent (reboot) Installation or Installation Oracle Grid Infrastructure RAC/Cluster (11.2 or 12 c). (Doc ID 1536057.1)
After the restoration of the links of the binaries of the grid, I relinked binaries and oracle, but dbca database did not work then also. Then I uninstalled the binary oracle and reinstalled.
The dbca run fine now... Happiness after frustrating 24 hrs.
-
Oracle 12 c Grid Infrastructure OCR VOTE the disk size
I'm installing network infrastructure Oracle 12 c 12.1.0.2 and notice the possibility of installing grid infrastructure repository disappeared, which means he needs space in the disc ocr/vote.
I have two node RAC on linux 6.5. What is the best practice on decinding the size of this drive oct/vote?
Thank you
This blog entry, it explains a little bit:
https://blogs.Oracle.com/upgrade/entry/grid_infrastructure_management_repository_gimr
Notice that the ball 'average growth size' will give you how to calculate db IWM needs. As a general rule, unless you have a large number of nodes in the cluster, 10 GB should be enough.
HTH,
Brian
-
Installation of the node2 RAC database
Hello
I installed grid infrastructure, Oracle RAC cluster db software.
Then in the node 1 installed listener and created / the set up db using dbca.
I have sucessfully created database and db info written in/etc/oratab.
Question: should I create an another data base using dbca in node 2? for example, if istalled node1 PROD1 db, should install PROD2 instance in node2?
What are the next steps after the installation of database in node1?
Thank you
Hello
Check if the ORACLE_HOME parameter is correctly set
On srv01
Export ORACLE_HOME =
export ORACLE_SID = PROD11
export ORACLE_BASE =
Or you can add PROD11 entered oratab copying PROD1 and the same mounting on srv01 PROD11
then run
. oraenv
The above sets the env
Then connect as
sqlplus / as sysdba
To connect via the application, please refer to the
Ref: How to integrate a database of the RAC 10 g / 11 GR 1 material with 11 GR 2 clusterware (SCAN) (Doc ID 1058646.1)
Ref: 11.2 Scan and node TNS Listener of installation examples (Doc ID 1070607.1)
Ref: How to solve the problem of connectivity with the name SCAN 11 GR 2 (Doc ID 975457.1)
Kind regards
Vautrin - Oracle
-
Must I also patch grid infrastructure home with power supply?
Hello
I am building a new server to replace an old one with the following configuration:
OLD Config: Oracle 11 g 2 EE (11.2.0.3) with POWER 16056266 block, on OEL 6.2 64-bit (file system)
NEW Config: Oracle 11 g 2 EE (11.2.0.3) with power supply on OEL 6.2 64-bit, ASM (grid below) 16056266, 11.2.0.3
If I understand correctly, grid Infra Software version cannot be less than that of RDBMS software. Because the RDBMS software must be patched with 16056266 power supply to match the existing server, I have a few questions:
- Should I ask a PSU 16056266 grid infrastructure home (I'm sure the answer is 'yes', but I want to ensure that)
- Is the same power supply for the RDBMS and grid infrastructure OR there is a download separate patch for grid below?
- I need to replace the existing 'OPatch"under grid infrastructure home with the latest [just like I do to patch House RDBMS]?
Thanks in advance!
Hello
You must apply the following PSU on the grid below:
BUG 16083653 - 11.2.0.3.6 (April 2013) Grid Infrastructure Patch Update (GI PSU) contains
BUG 16315641- PATCH UPDATE SET 11.2.0.3.6(GI COMPOSANTS de l'INFRASTRUCTURE GRID)
BUG 16056266 - 11.2.0.3.6 (April 2013) set of patches of database update (PSU)
as mentioned in: -.
Readme - Patch Installation and uninstallation of 11.2.0.3.x GI PSU [ID 1494646.1]
Kind regards
Dalia Sarey
-
Windows could not load the installer of the image. Help please!
My HP4010 scanner has stopped working. I tried to reload the software, but now get message ' windows has no load installer for the image. I have uninstalled and reinstalled the HP software and tried as far as I know. I downloaded the latest HP drivers but no change. I should be grateful if you would help.
Thank you
John
Hello
Step 1: This could also be a problem with the driver. I suggest you to install the right driver for your scanner from the manufacturer's Web site and check if it works very well.
Step 2: Install the latest version of DirectX on your computer.
Reinstall the latest version of Microsoft DirectX. For more information about troubleshooting and installing DirectX click the numbers below to view the articles in the Microsoft Knowledge Base:
(http://support.microsoft.com/kb/179113/ ) How to download and install DirectX(http://support.microsoft.com/kb/157730/ ) How to determine the version of DirectX using the DirectX Diagnostic tool
Step 3: You can also delete the upper and lower of your registry filters and check if it works.
WARNING:
Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.
http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
a. Click Start and then click all programs.
b. click Accessories and then click Run.
c. type regedit and then click OK.
d. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
e. in the navigation pane, locate and then click the registry key under:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
f. in the right pane, click UpperFilters.
Note You can also see an UpperFilters.bak registry entry. You don't have to delete this entry. Click UpperFilters. If you do not see the UpperFilters registry entry, you may still have to delete the LowerFilters registry entry. To do this, go to step i.
g. in the Edit menu, click on delete.
h. When you are prompted to confirm the deletion, click Yes.
i. in the right pane, click LowerFilters.
j. in the Edit menu, click on delete.
k. When you are prompted to confirm the deletion, click Yes.
Exit Registry Editor.
Mr., restart the computer.
-
Installation of the Client Essbase 11.1.1.3
Hello
I want to only install Essbase 11.1.1.3 customer (EAS Console) on my local machine (Windows XP).
I've extracted the Installer of the system, 4 parts Essbase Client and Services of the Foundation in a temporary folder and ran the InstallTool.cmd.
However, when I select choose components in layer or individually, I can't choose Essbase client (or any other component for that matter) that the checkbox is grayed out.
Have, first of all, he extracted the files correct?
My second question is whether a database backend (Oracle 11 g?) is required for the installation of customer? I guess that's not. Please confirm.
Would be happy to answer.
Thank you & see you soon,.
SahilThe required files are detailed here - http://download.oracle.com/docs/cd/E12825_01/epm.111/epm_install/ch02s02s02.html
If you click customer essbase in the installer, I think he should give a reason why it cannot be installed.
No you don't need a database to install the client.See you soon
John
http://John-Goodwin.blogspot.com/ -
Installation of the UCR switches from Oracle database 11g
UCR-6083: impossible - check requirement prerequisites for the selected item: SOAINFRA
Refer to the journal of the RCUS to D:\SOA1114\rcuHome\rcu\log\logdir.2011-04-05_12-12\rcu.log for more details.
RCU - 6107:DB prerequisites for Init Param failed: process
Current value is 40. It must be greater than or equal to 200.
RCU - 6092:Component validation selection failed. Please refer to connect to D:\SOA1114\rcuHome\rcu\log\logdir.2011-04-05_12-12\rcu.log for more details.
during the selection of the components, I selected soa infrastructure and I continued. but she stopped when checking for prerequisites.
pls find my file rcu.log as below.
--------------------------------------------------------------------------------------------------------------------
2011-04-05 12:12:11.694 NOTIFICATION rcu: oracle.sysman.assistants.common.util.LoggingManager::initialize: dir Log is not exist. Creation logdir:D:\SOA1114\rcuHome\/rcu/log\logdir.2011-04-05_12-12
2011-04-05 12:12:11.704 NOTIFICATION rcu: oracle.sysman.assistants.common.util.LoggingManager::initialize: Log file does not exist. Creation of journal file:D:\SOA1114\rcuHome\/rcu/log\logdir.2011-04-05_12-12\rcu.log
2011-04-05 12:12:11.704 NOTIFICATION rcu: oracle.sysman.assistants.common.util.LoggingManager::initialize: LOG_LEVEL_IS - NOTIFICATION: 1
2011-04-05 12:12:11.704 NOTIFICATION rcu: oracle.sysman.assistants.common.util.LoggingManager::initialize: hostname: PC161826
2011-04-05 12:12:11.704 NOTIFICATION rcu: oracle.sysman.assistants.common.util.LoggingManager::initialize: OSINFO: x 86 Windows 7 6.1
2011-04-05 12:12:11.714 NOTIFICATION rcu: oracle.sysman.assistants.common.util.LoggingManager::initialize: JREINFO: 1.6.0_21 D:\SOA1114\rcuHome\jdk\jre
2011-04-05 12:12:11.714 NOTIFICATION rcu: oracle.sysman.assistants.common.util.LoggingManager::initialize: username: 249141
2011-04-05 12:12:11.714 NOTIFICATION rcu: oracle.sysman.assistants.common.util.LoggingManager::initialize: USERDIR: D:\SOA1114\rcuHome\BIN
2011-04-05 12:12:11.714 NOTIFICATION rcu: oracle.sysman.assistants.common.util.LoggingManager::initialize: user country: U.S.
2011-04-05 12:12:11.714 NOTIFICATION rcu: oracle.sysman.assistants.common.util.LoggingManager::initialize: the user's language: en
2011-04-05 12:12:11.714 NOTIFICATION rcu: oracle.sysman.assistants.common.util.LoggingManager::initialize: Java class path: D:\SOA1114\rcuHome\\jlib\rcu.jar;D:\SOA1114\rcuHome\\jlib\share.jar;D:\SOA1114\rcuHome\\jlib\help-share.jar;D:\SOA1114\rcuHome\\jlib\ohj.jar;D:\SOA1114\rcuHome\\jlib\orai18n-mapping.jar;D:\SOA1114\rcuHome\\lib\xmlparserv2.jar;D:\SOA1114\rcuHome\\jdbc\lib\ojdbc5.jar;D:\SOA1114\rcuHome\\jdbc\lib\ojdbc14.jar;D:\SOA1114\rcuHome\\jlib\jewt4.jar;D:\SOA1114\rcuHome\\jlib\ojdl.jar;D:\SOA1114\rcuHome\\modules\oracle.odl_11.1.1\ojdl.jar;D:\SOA1114\rcuHome\\jlib\SchemaVersion.jar;D:\SOA1114\rcuHome\\jlib\wldb2.jar;D:\SOA1114\rcuHome\\jlib\wlsqlserver.jar;D:\SOA1114\rcuHome\\jlib\wlbase.jar;D:\SOA1114\rcuHome\\jlib\wlutil.jar;D:\SOA1114\rcuHome\\ jlib\fmwgenerictoken.jar;D:\SOA1114\rcuHome\\jlib\com.bea.core.weblogic.workmanager_1.9.0.0.jar;D:\SOA1114\rcuHome\\jlib\oracle_ice.jar;D:\SOA1114\rcuHome\\jlib\rcuhelppages.jar;D:\SOA1114\rcuHome\\assistants\opca\jlib\opca.jar;D:\SOA1114\rcuHome\\portal\jlib\ptlshare.jar;D:\SOA1114\rcuHome\\jlib\ldapjclnt11.jar;D:\SOA1114\rcuHome\\jlib\commons-collections-3.1.jar;D:\SOA1114\rcuHome\\jlib\commons-dbcp-1.2.1.jar;D:\SOA1114\rcuHome\\jlib\commons-logging.jar;D:\SOA1114\rcuHome\\jlib\commons-pool-1.2.jar;D:\SOA1114\rcuHome\\jlib\quartz-1.6.0.jar;D:\SOA1114\rcuHome\\jlib\xml.jar;D:\SOA1114\rcuHome\\jlib\jta.jar;D:\SOA1114\rcuHome\\jlib\iam-platform-utils.jar;D:\SOA1114\rcuHome\\jlib\iam-platform-authz-service.jar;D:\SOA1114\rcuHome\\jlib\iam-features-identity.zip;D:\SOA1114\rcuHome\\jlib\ iam-features-configservice.zip;D:\SOA1114\rcuHome\\jlib\jps-api.jar;D:\SOA1114\rcuHome\\jlib\jps-common.jar;D:\SOA1114\rcuHome\\jlib\jps-ee.jar;D:\SOA1114\rcuHome\\jlib\jps-internal.jar;D:\SOA1114\rcuHome\\jlib\jps-manifest.jar;D:\SOA1114\rcuHome\\jlib\MicroSM.jar;D:\SOA1114\rcuHome\\jlib\javax.persistence_1.0.0.0_1-0-2.jar;D:\SOA1114\rcuHome\\jlib\org.eclipse.persistence_1.0.0.0_1-1-0.jar;D:\SOA1114\rcuHome\\jlib\identitystore.jar;D:\SOA1114\rcuHome\\jlib\jps-unsupported-api.jar;D:\SOA1114\rcuHome\\jlib\pd-internal.jar
2011-04-05 12:12:11.714 NOTIFICATION rcu: oracle.sysman.assistants.common.util.LoggingManager::initialize: Java library path: D:\SOA1114\rcuHome\jdk\jre\bin; ; C:\Windows\Sun\Java\bin; C:\Windows\System32; C:\Windows;D:\SOA1114\rcuHome\\bin; C:\oraclexe\app\oracle\product\10.2.0\server\bin; C:\Windows\System32; C:\Windows; C:\Windows\System32\Wbem; C:\Windows\system32\WindowsPowerShell\v1.0\
2011-04-05 12:12:11.714 NOTIFICATION rcu: oracle.sysman.assistants.rcu.Rcu::execute: launch RCU.
2011-04-05 12:12:11.714 NOTIFICATION rcu: oracle.sysman.assistants.rcu.Rcu::execute: InteractiveRCUModel of creation
2011-04-05 12:12:12.224 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.xmldata.RepositoryConfigManager: < init >: rather than DTD: D:\SOA1114\rcuHome\/rcu/config/
2011-04-05 12:12:12.224 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.xmldata.RepositoryConfigManager: < init >: ComponentInfo xml location: D:\SOA1114\rcuHome\/rcu/config/ComponentInfo.xml
2011-04-05 12:12:12.224 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.xmldata.RepositoryConfigManager: < init >: xml storage location: D:\SOA1114\rcuHome\/rcu/config/Storage.xml
2011-04-05 12:12:12.224 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.xmldata.RepositoryConfigManager: < init >: DTD Validation: true
2011-04-05 12:12:12.234 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.RCUCommandLineParser::process: processing command line...
2011-04-05 12:12:57.107 NOTIFICATION rcu: oracle.sysman.assistants.common.dbutil.jdbc.JDBCEngine::connect: the connection to the database: user: sys, role: SYSDBA, connectString: (description = (address = (host = localhost)(protocol=tcp) (port = 1521)) (connect_data = (service_name = XE) (server = dedicated)))
\rcuHome\/RCU/integration//EPM/registry/RepositoryConfig.XML is valid
2011-04-05 12:12:58.267 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.xmldata.RepositoryConfigManager::parseStorageData: XML Document: D:\SOA1114\rcuHome\/rcu/config/Storage.xml is valid
2011-04-05 12:12:58.467 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.task.ActualTask::run: turnaround time for initialization of configuration metadata repository: 640 milliseconds
2011-04-05 12:12:58.467 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.task.ActualTask::run: execution of task: get the properties of the specified database
2011-04-05 12:12:58.467 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.validation.PrereqEvaluator::executePrereqTask: Prereq taskId = PREREQ_QUERY_DATABASE
2011-04-05 12:12:58.517 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.task.ActualTask::run: lead time to get the properties of the specified database: 50 milliseconds
2011-04-05 12:12:58.517 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.task.ActualTask::run: execution of task: obligation of verification for the specified database
2011-04-05 12:12:58.517 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.validation.PrereqEvaluator::executePrereqTask: Prereq taskId = PREREQ_GLOBAL_CHECK
2011-04-05 12:12:59.967 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.task.ActualTask::run: lead time for the requirement of verification for the specified database: 1450 milliseconds
2011-04-05 12:12:59.967 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.task.ActualTask::run: task execution: run before create operations
2011-04-05 12:12:59.967 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.task.CustomCompManager::getActionList: CustomCompManager.getActionList: CUSTOM_COMP_PRELOAD_SETUP
2011-04-05 12:12:59.977 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.task.AbstractCompTask::execute: ValidationRule result was false. Jump action: oracle.ias.version.SchemaVersionUtil:utilCreateRegistryAndCopyData
2011-04-05 12:12:59.977 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.task.AbstractCompTask::execute: ValidationRule result was false. Jump action: oracle.ias.version.SchemaVersionUtil:utilCreateRegistryTable
2011-04-05 12:12:59.977 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.task.ActualTask::run: lead time to run before the operations of creation: 10 milliseconds
2011-04-05 12:14:15.656 NOTIFICATION rcu: oracle.sysman.assistants.common.task.ProgressPanel::progressToNextTask: waiting for delegate be visible
2011-04-05 12:14:15.666 NOTIFICATION rcu: oracle.sysman.assistants.common.task.ProgressPanel::progressToNextTask: waiting for delegate be visible
2011-04-05 12:14:15.676 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.task.ActualTask::run: execution of task: Metadata Services
2011-04-05 12:14:15.676 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.validation.PrereqEvaluator::executePrereqTask: Prereq taskId = MDS
2011-04-05 12:14:15.676 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.validation.PrereqEvaluator::executePrereqTask: from prereq check component
2011-04-05 12:14:15.706 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.task.ActualTask::run: turnaround time for metadata Services: 30 milliseconds
2011-04-05 12:14:15.706 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.task.ActualTask::run: execution of task: SOA Infrastructure
2011-04-05 12:14:15.706 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.validation.PrereqEvaluator::executePrereqTask: Prereq taskId = SOAINFRA
2011-04-05 12:14:15.706 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.validation.PrereqEvaluator::executePrereqTask: from prereq check component
2011-04-05 12:14:15.706 rcu ERROR: oracle.sysman.assistants.rcu.backend.task.PrereqTask::execute: Prereq evaluation failed
Refer to the journal of the RCUS to D:\SOA1114\rcuHome\rcu\log\logdir.2011-04-05_12-12\rcu.log for more details.
at oracle.sysman.assistants.rcu.backend.validation.PrereqEvaluator.executePrereqTask(PrereqEvaluator.java:642)
at oracle.sysman.assistants.rcu.backend.task.PrereqTask.execute(PrereqTask.java:68)
at oracle.sysman.assistants.rcu.backend.task.ActualTask.run(TaskRunner.java:306)
at java.lang.Thread.run(Thread.java:619)
2011-04-05 12:14:31.806 rcu ERROR: oracle.sysman.assistants.rcu.backend.task.ActualTask::run: UCR failed
oracle.sysman.assistants.common.task.TaskExecutionException: UCR-6083: impossible - check requirement prerequisites for the selected item: SOAINFRA
Refer to the journal of the RCUS to D:\SOA1114\rcuHome\rcu\log\logdir.2011-04-05_12-12\rcu.log for more details.
RCU - 6107:DB prerequisites for Init Param failed: process
Current value is 40. It must be greater than or equal to 200.
at oracle.sysman.assistants.rcu.backend.task.PrereqTask.execute(PrereqTask.java:76)
at oracle.sysman.assistants.rcu.backend.task.ActualTask.run(TaskRunner.java:306)
at java.lang.Thread.run(Thread.java:619)RCU - 6107:DB prerequisites for Init Param failed: process
Current value is 40. It must be greater than or equal to 200.Please increase the DB process parameter properly. Please see-
http://www.Oracle.com/technetwork/middleware/soasuite/overview/quickstartguidesoasuite11gr1ps3-313245.PDF
Run under SQL before starting the RCU-
SQL > alter system reset sessions scope = spfile sid ='* ';
SQL > change processes control system = 300 scope = spfile;
SQL > shutdown immediate
SQL > startupKind regards
AnujPublished by: Anuj Dwivedi on April 5, 2011 13:24
-
Installation of the Infrastructure of grid and patchwork of power supply
Version of the GRID: 11.2.0.3, 11.2.0.2
Platform: AIX 6.1
Found a similair in a spiral position in OTN on. But couldn't find the answer here; That is why this announcement
We install the grid using the GUI installation program grid. When you perform a new installation of the Infrastructure of grid 11.2.0.2 or 11.2.0.3 in a new server, I want to apply its latest PSU as well. When should I do this task PSU?
Should I follow option A or B above?A. Should I apply the GI PSU after the entire Grid installation is successfully completed ? or B. Should I apply the GI PSU just before running the root.sh ? ie. when the installer prompts you to run root.sh (see the screenshot below) http://husnusensoy.files.wordpress.com/2009/10/camtasiastudio351.png At this stage(before running root.sh) the GI binaries are in place . So , I can apply the PSU on these binaries? Right?
Hello
Should a. I apply the PSU IM after the installation of the grid ends successfully?
Yes, you must complete the successful installation and after apply PSU
B. can I apply the PSU im just before you run the root.sh?
That is to say. When the installation program prompts to run root.sh (see the screenshot below)
http://husnusensoy.files.WordPress.com/2009/10/camtasiastudio351.PNG
At this point (before you run the root.sh script) GI binaries are in place. So, can I apply the power supply on these binaries? Right?Yes, you must complete (close) runInstaller after root.sh, so you can ask the PSU, because if you start with YES opatch (runInstaller) runs the inventory will be locked.
Also, you have an opportunity to decide if you want to use the software upgrades during the Installation.
YES can install updates patch reviews, requirements system updates (hardware, operating system settings and packages of core) for the operating systems supported and other important updates that can help ensure that your installation is going smoothly. Oracle recommends that you enable the software updates during the installation.
If you choose to enable the software updates, and then during installation you must provide valid My Oracle Support username and password during installation, so that YES can download the latest updates, or you must provide a path to the location of a software updates package you downloaded previously.
If you plan to run the installation in a secure data center, so you can download updates before you start the installation by starting YES on a system that has Internet access to download update mode. To start YES to download updates, enter the following command:
$ ./runInstaller -downloadUpdates
Provide My Oracle Support user name and password and provide the parameters of the proxy if necessary. After downloading the updates, transfer the update file to a directory on the server where you plan to run the installation.
Kind regards
Levi Pereira
Maybe you are looking for
-
Automatic recognition of dates
Nice day I noticed that the iPhones highlight automatically words like "tonight," or tomorrow 'morning', which trigger a calendar app when you press on them. However, it does not recognize the words as "100 years' as a date. Why? "In 100 years" is a
-
Original title: I have HP laptop with Windows Vista, I recently met a connection problem. I can't connect to the wired or wireless network. I network is invisible and I want to go back to the old setting. Could you please tell me how to do this
-
Replace a 593553-001 593554-001
The battery on my Hp dm4-1300eo is that turned bad has the number of spare HP 593554-001. Can I replace the battery by a 593553-001. For me it looks the same.
-
attempt to send emails, windows application charaters stop spammers
I wrote 3 emails, but when I hit send the message came back to saying me - to stop spammers, enter charaters before sending your message.
-
Cannot fax in Win 7 - getting the message media is write protected
I can't fax anything to Win 7 Professional. Whenever I click on send, I get a message that the media is write protected. I have faxed successfully in the past. I tried to many different docs, that nothing does, not even a regular cover page. Can any