order alphabetical xml filled dynamic textfields
I'm looking to get a dynamically created alphabetical sorting textfield created using a for each loop and XML.
How would I go about this, I searched and there of not much to this topic, and now I feel like I don't have a clue. The post that I found is absent from its own created utilities class (I think):
http://help.mfazio.com/?p=75 & cpage = 1 #comment-39.
So where I even start?
Thanks for any help in advance! I'm still learning explain so much more you more I learn (thank you).
Add your textfields in a table and sorting using a custom sort function:
After that text is assigned:
var tfA:Array = [textfields table];
tfA.sort (sortByText);
function sortByText(tf1:TextField,tf2:TextField):int {}
If (tf1.text<>
Returns - 1;
} else {if(tf1.text>tf2.text)
Return 1;
} else {}
return 0;
}
}
Tags: Adobe Animate
Similar Questions
-
How to keep special characters in a dynamic textfield for textual comparison?
The problem is the following:
As I develop primarily for several languages, I have to have dynamic textfields in my buttons that contain three lines (to account for the different text.lengths in different languages).
I then fill the textfields with strings from an array or an xml and use the contents of textfields later in my button class to run a different code based on the contents of textfields.
It works fine as long as I don't use special characters, such as for example '\n '.
var labels: Array = ["\nLABEL1","LABEL\n\n2"];
...
Switch (e.currentTarget.txt.text)
{
labels box [0]:
doSomething();
break;
[1] case labels:
doSomethingElse();
break;
}
...
Watch the good thing in the label of the button (breaks up the text were want it)
but stops working
(htmlText & < br > This is the same thing)
My solution for now is to use spaces to fill,
var labels:Array = [" LABEL1","LABEL 2"];
but it's obviously ugly to set up and require a lot of trial/error to get it right for all languages.
Any ideas how to get around this?
This isn't a good idea to rely on the labels of the buttons to link to the feature at first - we shouldn't mix presentation and business logic. There is more than one dependencies. A better approach would be to separate the presentation logic.
-
Question of dynamic textfield with some specific device fonts
Hello!
I am facing a serious problem here, and any testing I try to do, led to no solution...
I have a few dynamic textfield with assigned "Arial Unicode MS" font in Flash CC2014, and "use device fonts" for anti-aliasing settings.
These textfield are powered by xml.
Everything works fine in Flash CS6, BUT when I publish a SWF with CC2014, the textfields do not show the "Arial Unicode MS", but something more resembling a police 'Times '. Nothing like "Arial" anyway... When I load the fla in CS6, no problem. Even if I re-record the fla with CS6, as soon as it is loaded in the CS2014, the published SWF shows the same 'Times' of fonts.
I know that some of you have already faced this problem, but I have yet to see any solution.
Is this a bug in CC2014? Is there a solution? (except the CS6 FLAS to edition )
Thanks in advance for your help...
Hello
There seems to be a difference in the name of the font family specified via the Panel properties and the police that gets applied on the field of text in Swf (for specific fonts only). This difference is causing police to the rescue of a default one instead of use the one specified. We will connect this as a bug and study in their own country.
In the meantime, you can add this feature in your fla files to manually specify the correct font family name through Actionscript.
import flash.text.TextFormat;
import flash.text.TextField;
fixFont (txtLabel, "ABCD 1234! @# $") //txtLabel is the instance name of text on stage"
function fixFont (myTextInstance:TextField, myText:String) {}
myTextInstance.text = myText;
var tf:TextFormat = myTextInstance.getTextFormat ();
TF.font = "Arial Unicode MS";
myTextInstance.setTextFormat (tf);
}
I hope it works for you.
-Mabrouk
-
Find the info to dynamic textfield
IM in a project is almost finished.
I need 1 small thing to comlete and I need your help.
His search for the video with textstring.
And for that I got 7 files huge XML with the code for the file name and the search word. It looks like this.
< item i_name = "Hello" i_video = "hello.flv" / >
< item i_name = "Today" i_video = "today.flv" / >
< item i_name = 'Sound' i_video = "sound.flv" / >
In my flash project that I want to have a dynamic textfield that can show how many videos, it is planned...
How can I do this?
per dayFor more information about XML, I suggest you join on w3schools.org they have free information on the subject. http://www.w3schools.com/xml/default.asp also for the use of XML in flash I recommend reading information on the XML class on to adobe live docs: start here: http://livedocs.adobe.com/flash/mx2004/main_7_2/wwhelp/wwhimpl/js/html/wwhelp.htm?href=000 00138.html
also another good tutorial on XML in flash. http://www.ActionScript.org/resources/articles/9/1/XML-101/Page1.html
-
The assignment of text to dynamic textfield
How would you assign text to a dynamic textfield with code (html5)?
The same way you do in a document of the ActionScript.
this.myTexfield.text = "I am the model of a modern major-general.";
-
dynamic textfield var score does not not in facebook post
dynamic textfield var score does not not in facebook post. Rather it showing "OBJECT TEXT FEILD.
import flash.events.Event;
btnFB.addEventListener (MouseEvent.CLICK, gotoFB);
function gotoFB(e:Event)
{
var url: String = " " " https://www.Facebook.com/Dialog/Feed ?" +
"20app_id % = 1487500124800564% 20 & display = popup +.
"& caption = I % 20just % 20scored % 20 ' + score +
"& link = graphicscoder.org +.
"& redirect_uri = . https://www.Facebook.com/ "; "
navigateToURL (new URLRequest (url), "_blank");
}
you assign something (for example, note) to be instead of the text property of the textfield textfield.
-
How to fill a textfield with 3D part number.
I have this javascript attached to 3D annot:
meh var = new MouseEventHandler();
meh.reportAllTargets = true;
meh.onMouseDown = true;
meh.onEvent = function (mouseEvent)
{
if(!mouseEvent.rightButtonDown)
{
myPart = (mouseEvent.hits [0].target.name);
Console.println ("is:" + myPart);
}
}
runtime.addEventHandler (meh);
This code works fine and displays the part number in the console. But how can I get the part number to fill a textfield in Acrobat named myTextField.
Thank you!
Simple answer is to replace
Console.println ("is:" + myPart);
with
host.getField ("myTextField") .value = myPart;
Your script does not support the idea that the visits table could be empty (for example if you click on the background). It is better to do it like this:
meh.onEvent = {Function
If (! e.rightButtonDown) host.getField ("myTextField") .value = (e.hits.length > 0)? e.Hits [0]. Target.Name;:
}
-
Hello
A simple task is driving me crazy today...
I want to fill a Textfield with a default value.
I wrote this code as a process:
Which causes the following error:begin :P9_Textfield := (SELECT my_def_value FROM my_table WHERE my_description = 'take_this_one'); end;
my_table looks like this:1 error has occurred * ORA-06550: line 3, column 42: PLS-00103: Encountered the symbol "SELECT" when expecting one of the following: ( - + case mod new not null others <an identifier>...
ID-my_description - my_def_value
_________________________________
1. "take_this_one"-"def_val1"
2. "not_this"-"def_val2"
I can not find the reason. What is the problem with that?
Thank you!
pATHello
Create type SQL query for example before calculation regions.
Or change your process
declare l_txt VARCHAR2(32700( begin SELECT my_def_value INTO l_txt FROM my_table WHERE my_description = 'take_this_one'; :P9_Textfield := l_txt; end;
Kind regards
Jari -
Discoloration/output dynamic textfield with AS3
Hi all
As the title, how do I exit/fade dynamic textfield with the mere knowledge of AS3? I have 3 textfields on stage, instance names: txt_1, txt_2, txt_3
Every 10 seconds, I'm going in the new channel to all 3 textfields. I would like to improve the Visual for them, thinking that it would be better by adding in fading in and out effect when new channels are passed in.
passTimer = new Timer(10000); passTimer .addEventListener(TimerEvent.TIMER, passTimerFn); function passTimerFn(e:TimerEvent) { getNewString(); txt_1.text = myStringArray[0]; txt_2.text = myStringArray[1]; txt_3.text = myStringArray[2]; }
Thank you
Zainuu
You can use tweener or the tween class flash or any other class of part 3. I (and many others) prefer tweenlite by greensocks.
and Yes, you need to integrate your fonts no matter what you use. You can view a textifled with a less than 1 alpha, unless the police is incorporated. There is no exception.
-
Fill a textfield with the drop-down list selection
Day of goo,
I have a menu drop down and a textfield in a table with one line and an Add button.
The line is repeatable, now, when I select a value in the drop-down list, say "23" and it fills the textfield say with "Jordan".
Then I click the addButton to add a new line, now I select '7' in the new drop-down list and its supposed to fill the new textfield with "David Villa,"
Instead, he replaces what was on the original textfield("Jordan") with David Villa, leaving the new empty textfield.
Can someone help me please.
Another thing, I have to select two times for the drop-down list to the fire, why is this?
Hello
First thing: I suspect that you have the script to the change event, but use .rawValue for the test. With the drop-down menus, I tend to use the exit and .rawValue event.
With respect to the textfield, you probably use a too full reference, like "Row1.usersName". If you just use "usersName, for example the name of your textfield, then Acrobat/Reader uses the particular instance of the textfield in the same line as the drop-down list.
Hope that helps,
Niall
-
What are the methods to make the fonts in a more marked dynamic textFields?
This code will not show the text field using the embed font type?
This.createTextField("hello_txt",0,10,10,100,20) ("scroll_txt", this.getNextHighestDepth (), 0, 0, 0, 0);
This.createTextField("hello_txt",0,10,10,100,20) ("newszlatest", this.getNextHighestDepth (), 556, 170, 355, 290);
newszlatest. Multiline = true;
newszlatest.wordWrap = true;
newszlatest.textColor = 0xFFFFFF;
newszlatest.embedFonts = true;
newszlatest.font = Font1;
newszlatest._rotation = 45;
Whenever you get a message on a running script, and you have to look in your code for items that can make that
occur. 'while' loops are known for it... until the condition no longer exists. Check the values of your requirements to see if/why that loops do not end.
-
Hello
I made a movieclip with instance name: cs_btn
Inside of that movieclip, I have two layers. Bottom and top button dynamic textfield.
In this scenario, I have a 'more' 'out' 'down' and 'up' labels image.
It works fine, but when I use a dynamic textfield, the passage of the mouse and the MouseDown event are triggered
also when you hover over the textfield object. Even when I turned the selectable property.
Any idea of what is the cause?
In the main timeline, I made this script:
function cs_buttonEvent(event:MouseEvent):void {}
trace (Event.type);
Switch (event.type) {}
case "mouseDown":
event.currentTarget.gotoAndPlay ("down");
break;
case "mouseUp":
event.currentTarget.gotoAndPlay ("up");
break;
case 'mouseOver ':
event.currentTarget.gotoAndPlay ("over");
break;
case 'mouseout/mouseouthandler() ':
event.currentTarget.gotoAndPlay ("out");
break;
by default:
trace ("mouse five event");
break;
}
}
cs_btn.addEventListener (MouseEvent.MOUSE_DOWN, cs_buttonEvent);
cs_btn.addEventListener (MouseEvent.MOUSE_UP, cs_buttonEvent);
cs_btn.addEventListener (MouseEvent.MOUSE_OVER, cs_buttonEvent);
cs_btn.addEventListener (MouseEvent.MOUSE_OUT, cs_buttonEvent);
You can assign the check fake gold button mouseChildren property the
target in the event handler.function cs_buttonEvent(event:MouseEvent):void {}
If (event.target! = cs_btn) return; bug out
trace (Event.type);
Switch (event.type) {}
case "mouseDown":
event.currentTarget.gotoAndPlay ("down");
break;
case "mouseUp":
event.currentTarget.gotoAndPlay ("up");
break;
case 'mouseOver ':
event.currentTarget.gotoAndPlay ("over");
break;
case 'mouseout/mouseouthandler() ':
event.currentTarget.gotoAndPlay ("out");
break;
by default:
trace ("mouse five event");
break;
}}
-
Need help filling single textfield with dynamic array data
Hello
I am filling a text field with a dynamic array data. So I know how many points are in the table with the instancemanager.count function. I need to help get the data from the dynamic table and insert into a field of text followed by a comma.
Example:
Dynamic table: row [1]: DATA_01
line [2]: DATA_02
rank [3]: DATA_03
...
I would like to than the text box to automatically fill data in this format: DATA_01, DATA_02, DATA_03... and continue if there is more data.
I started with the code below, but it does not work.
var Count = form1.page2.DATA_history.instanceManager.count;
var temp;
for (var i = 0; i < Count; i ++)
{
Temp = xfa.resolveNode ("form1.page2.PO_history [" + i + "]"). DATA.rawValue; This seems to get the last line only entry.
this.rawValue = this.rawValue + temp;
}
I hope I was clear, but if someone need for clarification please ask. Thank you.
Hello
Try the following:
var Count = form1.page2.DATA_history.instanceManager.count;
var temp = "";
for (var i = 0; i)
{
Temp = temp + xfa.resolveNode ("form1.page2.PO_history [" + i + "]"). DATA.rawValue + ",";
}
this.rawValue = temp;
-
How? extern XML in Datagrid updates dynamic textfield
Hi, I hope someone can help me with that.
I have a datagrid that is populated with xml extern.
The number of items change from time to time.
I have a date and a title in the DataGrid, but clicking on I want the text of the element (which is also available in the XML file) appear in the TextField.
I saw examples of data from the datagrid to appear again in the textfield, but that is not what I want.
Any help is greatly appreciated.
Here is the code (datagrid working on the update of the TextField is not):
--------------------
Stop();
import flash.events.Event;
import flash.net.URLRequest;
Import fl.data.DataProvider;
var agendaXML:XML;
var agendaXmlLoader: URLLoader = new URLLoader();
agendaXmlLoader.addEventListener (Event.COMPLETE, agendaLoaded);
agendaXmlLoader.load (new URLRequest ("http://dbmini.local/AZC/createXMLfromAZC.php"));
function agendaLoaded(evt:Event):void
{
agendaXML = new XML (agendaXmlLoader.data);
var componentProvider:DataProvider = new DataProvider();
for (var i: uint = 0; i < agendaXML.verhaal.length (); i ++)
{
componentProvider.addItem ({Datum:agendaXML.verhaal [i] .datum, Kop:agendaXML.verhaal[i].kop});})
agenda.addEventListener (Event.CHANGE, agendaItemKlik);
function agendaItemKlik(event:Event):void
{
tekstVlak.text = event.target.selectedItem.agendaXML.verhaal [i] .tekst;
}
}
agenda.dataProvider = componentProvider;
}
never nest named functions. Try:
import flash.events.Event;
import flash.net.URLRequest;
Import fl.data.DataProvider;
var agendaXML:XML;
var agendaXmlLoader: URLLoader = new URLLoader();
agendaXmlLoader.addEventListener (Event.COMPLETE, agendaLoaded);
agendaXmlLoader.load (new URLRequest ("http://dbmini.local/AZC/createXMLfromAZC.php"));
function agendaLoaded(evt:Event):void
{
agendaXML = new XML (agendaXmlLoader.data);
var componentProvider:DataProvider = new DataProvider();
for (var i: uint = 0; i< agendaxml.verhaal.length();="">
{
componentProvider.addItem ({Datum:agendaXML.verhaal [i] .datum, Kop:agendaXML.verhaal[i].kop});})
}
agenda.dataProvider = componentProvider;
agenda.addEventListener (Event.CHANGE, agendaItemKlik);
}
function agendaItemKlik(event:Event):void
{
tekstVlak.text = agendaXML.verhaal [event.target.selectedIndex] .tekst;
}
-
Reverse the order of XML DataModel
I have the code loading items from an RSS feed below. The items are inserted in the reverse order. The attribute sortedAscending did nothing to help. How can I reverse the order in the listview?
GroupDataModel { id: articlesDataModel grouping: ItemGrouping.None }, // The data source that fills the above model with the articles DataSource { id: articlesDataSource source: "" query: "/rss/channel/item" type: DataSource.Xml onDataLoaded: { articlesDataModel.clear(); articlesDataModel.insertList(data); } },
The problem was with ListView. GroupDataModel returns itemType "item", but ArrayDataModel returns itemType empty by default, so I added this function to the ListView to substitute itemType:
ListView { id: articlesListView dataModel: articlesDataModel function itemType(data, indexPath) { return "item" // use ListItemComponents of type 'item' for every item }
Another option is to detach type: 'point' of ListItemComponent when using ArrayDataModel if you do not plan to use different item types.
In the data source:
onDataLoaded: { myIndicator.stop(); articlesDataModel.clear() for(var i = 0; i < data.length; ++i) { print("data[i]=" + data[i]) articlesDataModel.append(data[i]) // or .insert(0, data[i]) to reverse the order } articlesListView.visible = true; }
Model:
ArrayDataModel { id: articlesDataModel //grouping: ItemGrouping.None },
Maybe you are looking for
-
I am trying to access the wireless network and to enumerate the available SSID, like how Windows does. Present a list of available Wi - Fi networks SSID. This information is available in the libraries of .NET example? I searched this for awhile, b
-
Hello everyone, I'm a newbe for these phones, and I think I can have messed up my Firefox. I downloaded the new Firefox 4 and deleted the one provided on the phone. I also downloaded Adobe flash 10.2. It seems that now I can't watch Utube videos. The
-
My son gave me his computer and he has all the bells of material and whistles that is Directx 10 which is not compatible with Everquest, so also, he refuses to load. I'm 68 and knowledge in little more then how turning the computer on and off so I ca
-
Loss of Adobe Enterprise CC license when the current CC user uses the login
We have CC Adobe Enterprise at our University. Recently, we have been having problems with people getting the error 'you already 2 registered computers in this account'. It happens on Mac and Windows. It seems that sometimes, when an individual who a
-
HelloI need to convert a node RAC Database 3 with 3 secondary Configuration node single instance. This has worked so far, but a problem is always open:On primary, I was able to remove the nets for other nodes withALTER DATABASE DISABLE THREAD 2.ALTER