Organize text into columns using CSS?

Similar Questions

• How to break captive text into columns?

  I begin to suspect that you cannot.

  What I want to do is select my area of text in a box and set the number of columns and be able to control the width of the gutter.

  Corel Draw was ridiculously easy with it, but I'm just not finding it with Amnesty International.

  I don't mean, if possible, to do several boxes and text flow into each other because it is, well that's just pathetic.

  Sorry, don't want to yell.

  Thank you!

  With the frame of the selected type, go to Type > Options of Type area and fill in the necessary.

  Peter

• How the color of text using CSS instead of font tags? [was: W3C Validator]

  Hi, I was hoping that someone could help me with a little problem I have with how I control the color in some of my text, the validator tells me to use CSS but tell me how, any help would be nice. Thanks, Jeff

  Line 59, column 102: are the item is obsolete. Use CSS instead.

  … <sup>per m&sup2;</sup></s>   <font color="red">Now only &pound;15.49

  https://www.qualitycarpets.NET/jAlbums-carpet-Saxony/Saxon-King-Saxony.php

  There are countless tutorials online covering it, and there are several ways to do this via CSS

  for example http://webdesign.about.com/od/css/a/aa051801a.htm

  A simple option using inline CSS:

  > Now only £15.49

  or, if the Red is semantically significant (i.e. significant),.

  CSS

  em {color: #f00 ;} }

  HTML

  <>> Now only £15.49

  Alternatively, you can achieve the same results using built-in or external CSS.

• text 2 a: hover effect using CSS

  Hi, I'm trying to find a way to get text links work differently with "color and roll over" in my html page.

  I have a few table in the page 'Council' with an 'id' example as an id = 'content '.

  How can I get the id = 'content' to have another roll on effect to the main 'body '.

  I am using CSS and this is what I used below for the body roll on:

  body, td, th {}

  do-family: Verdana, Arial, Helvetica, without serif.

  do-size: 10px;

  color: #FFFFFF;

  }

  a: link {}

  color: #CCCCCC;

  text-decoration: none;

  }

  a: visited {}

  color: #CCCCCC;

  text-decoration: none;

  }

  a: hover {}

  color: #FFFF00;

  text-decoration: underline;

  }

  a: active {}

  color: #FFFF00;

  text-decoration: none;

  }

  ============================================================================

  This is what I have so far in the CSS for the id = 'content', but does not not with a conflict between the two link:

  ============================================================================

  #content

  a: link {}

  color: #6600FF;

  text-decoration: none;

  }

  a: visited {}

  color: #FF00FF;

  text-decoration: none;

  }

  a: hover {}

  Color: #000000;

  text-decoration: underline;

  }

  a: active {}

  color: #6600FF;

  text-decoration: none;

  }

  Any help would be appreciated?

  Gary

  «"" You're almost here:»»»

  / * content links * /.

  #content a {text-decoration: none}

  #content a: link {color: #6600FF}

  #content a: visited {color: #FF00FF}

  #content a: hover {color: #000; text-decoration: underline}

  #content a: active,

  #content a: focus {#6600FF}

  Nancy O.

• How to align the position of a node in a pane of the grid using CSS?

  Hello
  
  I have an interface defined in FXML:

  <?xml version="1.0" encoding="UTF-8"?>
  
  <?import java.lang.*?>
  <?import javafx.scene.*?>
  <?import javafx.scene.control.*?>
  <?import javafx.scene.layout.*?>
  
  <BorderPane xmlns:fx="http://javafx.com/fxml" >
      <center>
          <GridPane alignment="top_center" hgap="8" prefWidth="450" vgap="8" style="-fx-padding: 10;" >
              <styleClass>
                  <String fx:value="form"/>
              </styleClass> 
                      
              <children>
  
                  <Label text="From" GridPane.columnIndex="0" GridPane.rowIndex="0" />
                  <TextField fx:id="from" GridPane.columnIndex="1" GridPane.rowIndex="0"/>
  
                  <Label text="Recipient(s)" GridPane.columnIndex="0" GridPane.rowIndex="1" />
                  <TextField fx:id="recipients" GridPane.columnIndex="1" GridPane.rowIndex="1"/>
                  
                  <Label text="Subject (defaults to title)" GridPane.columnIndex="0" GridPane.rowIndex="2" />
                  <TextField fx:id="subject" GridPane.columnIndex="1" GridPane.rowIndex="2"/>                   
                  
                  <Label text="Send mail as ..." GridPane.columnIndex="0" GridPane.rowIndex="3" />
                  <ListView fx:id="mail_format" prefHeight="100" GridPane.columnIndex="1" GridPane.rowIndex="3" />  
                  
                  <Label text="Plain Text Mail" GridPane.columnIndex="0" GridPane.columnSpan="2" GridPane.halignment="center" GridPane.rowIndex="4" />                  
                  
                  <Label text="Template" GridPane.columnIndex="0" GridPane.rowIndex="5" />
                  <TextField fx:id="plain_template" GridPane.columnIndex="1" GridPane.rowIndex="5"/>                
                                    
                  <Label text="Send as is (do not dump into plain text)" GridPane.columnIndex="0" GridPane.rowIndex="6" />
                  <CheckBox fx:id="plain_noconvert" GridPane.columnIndex="1" GridPane.rowIndex="6"/>
                  
                  <Label text="HTML Mail" GridPane.columnIndex="0" GridPane.columnSpan="2" GridPane.halignment="center" GridPane.rowIndex="7" />
                                  
                  <Label text="Template" GridPane.columnIndex="0" GridPane.rowIndex="8" />
                  <TextField fx:id="html_template" GridPane.columnIndex="1" GridPane.rowIndex="8"/>               
  
                  <Label text="Other configuration" GridPane.columnIndex="0" GridPane.columnSpan="2" GridPane.halignment="center" GridPane.rowIndex="9" />
                  
                  <Label text="Reply-To" GridPane.columnIndex="0" GridPane.rowIndex="10" />
                  <TextField fx:id="reply_tos" GridPane.columnIndex="1" GridPane.rowIndex="10"/>
                  
                  <Label text="Cc" GridPane.columnIndex="0" GridPane.rowIndex="11" />
                  <TextField fx:id="ccs" GridPane.columnIndex="1" GridPane.rowIndex="11"/>
                  
                  <Label text="Bcc" GridPane.columnIndex="0" GridPane.rowIndex="12" />
                  <TextField fx:id="bccs" GridPane.columnIndex="1" GridPane.rowIndex="12"/>
                  
                  <Label text="HTML base (defaults to current server)" GridPane.columnIndex="0" GridPane.rowIndex="13" />
                  <TextField fx:id="html_base" GridPane.columnIndex="1" GridPane.rowIndex="13"/>
                                                                                                                 
                  
              </children>
          </GridPane>
      </center>
  </BorderPane>

  I want to align the labels to right using CSS:

  .form *.label {
    -fx-alignment: right;
    -fx-font-weight: bold;
    -fx-hpos: right;
    -fx-text-alignment: right;
    -fx-text-wrap: true;
  }

  However I have not found any way to align the labels in the GridPane using CSS, or - fx-alignment: right, - fx-node-hpos: right. -fx-hpos: right. -fx-text-alignment: seem to work well...
  
  
  The only way to make it work is to define the attribute of each label Grid.halignment:

                  <Label text="HTML Mail" GridPane.columnIndex="0" GridPane.columnSpan="2" GridPane.halignment="right" GridPane.rowIndex="7" />

  But what happens if I want to change that at a later stage-> I need to change this attribute for each node.
  
  
  How can align the labels to right using CSS only?

  Currently CSS in JFX cannot really be used for layout page (or calibration). This is one of those grey areas between what is style (which should be in the CSS) and what is layout (which should be in the FXML). I think I remember Richard mentioning once in a forum or an article that he did not want to add alignment stuff to the CSS at a certain point, but don't quote me on that. You might have a search through Kenai to see if there is a feature request for it and if not add one.

  Perhaps you could it with fake labels stretch to fill the available space in the GridPane. For this, you need to disable the restriction of maximum size (setMaxWidth and setMaxHeight to Integer.MAX_VALUE) and ensure your forced GridPane are such that the label will fill the cell. Once you have a stretched label alignment will come into play as the text is aligned relative to the area of the label (as opposed to a manager that aligns the entire label compared to its parent). I think that put a border on the label when debugging to work on what's going on.

  Another less confined but more flexible alternative might be to use variables in your FXML files. You can do this in a number of ways. We must create a bean that has all the variables of your on it with accessors get and then you can move it to your charger FXML namespace and then reference it by using things like ${myConstants.gridAlignment}. Another is to create static methods on a class that a node, these can then be called from the FXML using a notation similar to GridPane.alignment. This second approach only works for things where you want to work directly on the node, but for your scenario which should be ok I think. And then there is always the option to activate a script language in your FXML, allowing you to perform more nothing.

  Hope that helps,
  zonski

• AS3 html using css rendering limits

  Hello.

  I imports a CSS stylesheet into Flash using AS3 and also an RSS parsing and I use CSS to format text filled from the nodes RSS channels. I need to bring all nodes in a rendered to HTML dynamic text field and wanted to incorporate a horizontal rule in the code.

  However it will not show. everything else works fine but the < hr / > tag seems not not fire.

  I tried to create a css for a horizontal rule stle and that put it as a span tag, but that no longer works.

  I'll post my CSS code first and then my AS3 code.

  All advice appreciated...

  CSS code

  p{
  font-family:Georgia, "Times New Roman", Times, serif;
  font-size:24px;
  font-weight:700;
  color:#035A91;
  
  }
  
  .myTextStyle1{
  font-family:Georgia, "Times New Roman", Times, serif;
  font-size:12px;
  color:#333333;
  
  }
  
  .myTextStyle2{
  color:#990000;
  font-weight:bold;
  
  }
  
  .myHr {
  border:none;
  width:80%;
  color:#FF0000;
  background-color:#FF0000;
  height:5px;
  
  }
  

  AS3 Code;

  var cssLoader:URLLoader;
  
  var loader:URLLoader = new URLLoader();
  loader.addEventListener(Event.COMPLETE, onLoaded);
  
  
  var xml:XML;
  
  function onLoaded(e:Event):void {
  
       xml = new XML(e.target.data);
  
       var firstheadtext:String = xml.channel.item[0].title;
       var firstbodytext:String = xml.channel.item[0].description;
       var secondheadtext:String = xml.channel.item[1].title;
       
  
       var myText:String = "<p>"+firstheadtext+"</p>"
       +"<span class='myTextStyle1'>"+firstbodytext+"</span><br/>"
       +"<br/>"
       +"<span class='myHr'></p><br/>"
       +"<br/>"
       +"<span class='myTextStyle1'>"+secondheadtext+"</span><br/>";
  
  
       function cssLoadComplete(event:Event):void {
            var sheet:StyleSheet = new StyleSheet();
            sheet.parseCSS(cssLoader.data);
            myTextField.styleSheet=sheet;
            myTextField.htmlText=myText;
       }
  
       var myTextField:TextField = new TextField();
       myTextField.width = 500;
       myTextField.height = 240;
       myTextField.multiline = true;
       myTextField.wordWrap = true;
       addChild(myTextField);
  
       var req:URLRequest = new URLRequest("myStyleSheet.css");
       cssLoader = new URLLoader();
       cssLoader.addEventListener(Event.COMPLETE, cssLoadComplete);
       cssLoader.load(req);
  
  loader.load(new URLRequest("http://www.calgaryheraldonline.com/rss_echo.php"));
  

  Here's a quick and personalized durty HR:

  var cssLoader:URLLoader;
  var req:URLRequest = new URLRequest("myStyleSheet.css");
  cssLoader = new URLLoader();
  cssLoader.addEventListener(Event.COMPLETE, cssLoadComplete);
  cssLoader.load(req);
  var sheet:StyleSheet;
  var loader:URLLoader = new URLLoader();
  loader.addEventListener(Event.COMPLETE, onLoaded);
  
  var myTextField:TextField;
  
  var xml:XML;
  
  function onLoaded(e:Event):void {
       xml = new XML(e.target.data);
       var itemList:XMLList = xml.channel.item;
       var hr:Sprite;
       var nextY:Number = 0;
       for (var i:int = 0; i < 2; i++) {
            myTextField = new TextField();
            myTextField.autoSize = TextFieldAutoSize.LEFT;
            myTextField.width = 500;
            myTextField.multiline = true;
            myTextField.wordWrap = true;
            myTextField.styleSheet = sheet;
            myTextField.htmlText = makeNewsBlock(itemList[i]);
            addChild(myTextField);
            hr = divider;
            addChild(hr);
            myTextField.y = nextY + 10;
            hr.y = nextY + myTextField.height;
            nextY += myTextField.height;
       }
  
  }
  
  function get divider():Sprite{
            var sp:Sprite = new Sprite();
            sp.graphics.lineStyle(1, 0xcccccc);
            sp.graphics.moveTo(0, 0);
            sp.graphics.lineTo(500, 0);
            return sp;
  }
  function makeNewsBlock(item:XML):String {
       trace(item);
       var block:String = "
  " + item.title + "
  "
       + "" + item.description + "
  
  ";
  
       return block;
  }
  
  function cssLoadComplete(event:Event):void {
       // css listener not needed any longer for it is loaded only once
       cssLoader.removeEventListener(Event.COMPLETE, cssLoadComplete);
       sheet = new StyleSheet();
       sheet.parseCSS(cssLoader.data);
       loadRSS();
  }
  // I think this should be in separate function
  // so it can be called several times if needed
  function loadRSS():void {
       loader.load(new URLRequest("http://www.calgaryheraldonline.com/rss_echo.php"));
  }
  

• Why do I get texts into pieces and in the mess of others?

  Why my iPhone OS 6 more 9.2.1 receive texts into pieces and out of use?  Of it only happens with only the texts of some people, not everyone else.

  If it's TEXT and not iMessage (green bubble) then it is a function of carrier. Different companies have their "gateways" configured differently and so long texts can sometimes be break. Are the cases where this happens - individuals with one carrier other than yours?

• Convert a text into an MP3 file in the Alex voice?

  Hello world

  Is it possible to convert a text file to an MP3 file in the Alex voice on the iPad or Windows PC?  Apparently, this can be done on the Mac.

  I use the Alex voice to read the text all the time on my iPad, and I would like to be able to save the text as an MP3 file so that I can play on other devices (for example, iPod, Windows PCs).  So far I could not find built into the functionality of the iPad or iPad app that would allow me to do.  I also was not able to find any program for Windows PC that does this.

  I found various programs that convert text into MP3 files (for example, TextAloud3, Voice Reader home 15, etc.), but I like the Alex voice much more than the voice in these programs, so I really hope that there is a way to do it on the iPad or Windows PC.

  Thank you in advance for your help!

  N ° you can't do on an iPad. I don't think there's a way to do it on a Windows PC since voice is the property of Apple, as far as I know.

• Registration of image data to text - multi-column file

  Hello

  I'm currently grabbing images using functions IMAQ and am averaging of each image through the columns using IMAQ LinearAverages.vi. I am currently saving these values (IE a size of profile line 1: n) to a text file. However, I have a large amount of images (M) to capture, so I would like to display each image line profile data to an individual column.

  At the moment the text file captures all of the data, but in a single column, not very useful for the purposes of post-processing. Can someone suggest a nice way to do this? Records in a spreadsheet file better?

  I would appreciate any advice.

  Kind regards
  Miika

  
  

• How to upgrade the form for organizations put into service?

  Hello

  I have a similar problem, as indicated here IOM - provided users with versions of form different resources

  But I need to update the form for organizations. I added 3 custom to your UD_ADOU attributes and this form is visible to the new accounts set up. Old accounts ORG provisioned see attributes form the only version 0.

  So I tried to use FVC utility to update these accounts of Organization put into service, but it does not work.

  Here are my properties file:

  $ cat fvc.properties

  ResourceObject; OU AD

  FormName; UD_ADOU

  FromVersion; 0

  /ToVersion; AdOUForm02

  Parent; UD_ADOU_DEPARTMENTCODE; N/A

  Parent; UD_ADOU_ORGUNITTYPE; Department

  Parent; UD_ADOU_MANAGER; '' cn = manager01, ou = users, dc = adroot, dc = local"

  I think it works for the only user accounts (see doc: http://docs.oracle.com/cd/E27559_01/admin.1112/e27149/formver.htm#CCHCBDBJ )

  My question is, who can update a form for organizations put into service? Is it possible to update the configured accounts of organizations by FVC utility? If so, how?

  Thank you

  Milan

  OK I found the solution and I found a bug in the IOM probably.

  The main tables are SDK and UD_ADOU;

  The SDK table contains information about the last active version of the form... org

  The UD_ADOU table contains all the forms (supplied) and their version of the form that uses the account provisioned.

  So I used the following SQL command to update the version of IOM 11.1.2.1 forms:

  Update UD_ADOU set UD_ADOU_VERSION =

  (select SDK_ACTIVE_VERSION in the SDK where SDK_NAME = 'UD_ADOU');

  commit;

  In IOM 11.1.2.2.x I started the work of the "upgrade" form, but as I said, after this i see new attributes in the form of commissioning Org, but when I change the data, these data are not configured for the announcement.

  Then I checked the SDK and UD_ADOU tables and I found in the SDK table active the last version of the East ADOU 1.  BUT! in the UD_ADOU table, all records have UD_ADOU_VERSION = 7! (Value 7 is the number of the line of the record with the SDK_NAME = "UD_ADOU").  Is this a bug?

  I changed all these archives to the value 1.

  Update UD_ADOU set UD_ADOU_VERSION = 1;

  commit;

  And now, also commissioning works well in IOM 11.1.2.2.x

  Milan

• Text-to-speech using a variable

  Hello

  Is it possible to use a text variable in the text to speech for a specific slide? Are there examples of this? I use 8 Captivate to create a sensitive project.

  Thank you

  Peter

  As far as I know, it is not possible to insert a variable text into TTS text in Captivate.  In fact, it really must be very careful on the use of certain types of punctuation in Captivate of TTS to avoid conflicts when running.

• because the muse adobe converts text into an image?

  because the muse adobe converts text into an image?

  Hello

  Unless you use a Web safe font or install a Muse supported TypeKit fonts when designing or on your web page - Muse will turn these words into images to preserve their appearance.

  Secure Web fonts:

  http://www.WPDFD.com/issues/87/knowing_about_web_safe_fonts/

  Fonts taken Typekit support for Muse:

  http://museinsider.com/how-to-add-Typekit-fonts-to-your-Muse-site.html

  http://TV.Adobe.com/watch/Adobe-inspire-magazine/using-Typekit-with-Adobe-Muse/

  In addition, whenever you add text and try to create a hyperlink, it is said that the text requires the pixelation and the hyperlink does not work. In this case, either you use a font on the text system or apply the hyperlink to the structure of the whole text, not the selected text.

  See you soon,.

  Laurant

• How can I increase the font size of the url using CSS?

  I thought I knew how to do this. I want to increase the size of a url using CSS.

  I created a rule:

  {a.15text}

  do-family: Arial, Helvetica, without serif.

  font size: 25px;

  make-weight: normal;

  color: #BC2828;

  text-decoration: underline;

  }

  In the code, I have the following:

  " < a href =" http://www3.Imperial.AC.UK/edudev/workshops/intro/TfL "class ="15text"target ="_blank"> Introduction to teaching for learning < /a > "

  In Dreamweaver, the class = "15text" make the font size of the above more general url, but when I saw in the browser, the size of the font of the undelrined url remains low.

  What I am doing wrong? How to make the url, the largest font size?

  I have no problem of change in the characteristics of normal text, but a problem with URL.

  It's because you can't have class that start with a certain number of names.

  Replace - 15text - Texte15

• Better way to format the text: tags HTML or CSS?

  Probably a silly question, but...  I can format the text in a div using CSS Styles (Font size, make-Style, Font-Weight, etc.) or by applying an HTML tag, for example, < H1 >. (Or, I guess a combination where I use CSS to format the tag, but never mind that for now.)

  In general, one approach is better than the other? Thank you!

  Titles, paragraphs, lists, etc. give the semantic meaning and the vital structure to your content.  You can build a site without CSS styles, but you can not build a site without titles, paragraphs, and other HTML tags.

  Nancy O.

• How to change a large number of images using CSS in HTML5 and CSS3

  I have a CSS image gallery that displays a larger picture with descriptive text underneath, a thumbnail image is hovered over.

  Each photo has code like the following:

  < a class = "thumbnail" >

  "< img src="thumbs1/paradethumbs/DSC_0073.jpg "alt ="thumbnail"/ >

  "" < span > < img src="pics1/paradepics/DSC_0073.jpg" alt = "" / > < br > 19 - a black face sheep. " </span >

  < /a >

  The first source is an image thumbnail, stored at a size of 72 by 48.

  The second source is an image stored at 600 x 400.

  When the thunbnail is hovered on, enlarge the photo is displayed to its size using css.

  There are 20 or if thumbnails in this gallery and different numbers in the other galleries that use the same code.

  The above example is number 19 of 20.

  This works very well on tablets and large screens.

  When I want to show it on an Iphone or similar, with a screen that is 480 or less wide, I need to enlarge it up to 300 large scale.

  The Iphone will have a lower quality of the image to a larger screen, it won't matter too much if photography 600 x 400 is reduced, and after having tried giving him an ID with CSS as

  #imagescale {width: 300px ;} seems acceptable.} However, as the ID is supposed to be unique, then it's a no go area for the remaining photos.

  My problem is how can I select the second source of the image shown in bold above and scale it and reach of 50% text.

  The text is not too important because it can be modified to fit - the image is the main problem.

  I need something like "If the display is less than 600 and the image is located in the directory of photos, it shows 300 offshore."

  I hope that the browser will take care of the height.

  Any suggestiosn would be appreciated.

  Howard Walker

  Unlike #IDs, the .classes can be used multiple times per page.

  Use the questions from the media and an external CSS file for portable devices,

  http://www.Adobe.com/devnet/Dreamweaver/articles/dw_html5_pt3.html

  CSS:

  . {img full-size}

  Width: 50%;

  height: 50%;

  }

  . Full-size {make-size: 50 %}}

  HTML:

  class = "life-size"> 50% of size

  Nancy O.

  ALT-Web Design & Publishing

  Web | Graphics | Print | Media specialists

  http://ALT-Web.com/

  http://Twitter.com/ALTWEB