Organizer freezes when importing all the mov and some jpg files
I used the Task Manager to close Photoshop Elements 10 and then go out the jpg on that it froze the folder. Relaunch Photoshop, select some files and run until the frost.
He has read thousands of jpg files, but just freezes on the other. I have no idea what's different about these jpg. Can't find any help by searching the forums. Since a few hours on this now.
Any suggestion would be appreciated.
I need to find a way for her to read mov files, because with all the travel, I managed to delete them from my network-attached storage which did not have the burning trash (he says disgustedly).
Your original thought "except a few network problems" proved to lead me to a solution.
Open and save the photo on which Photoshop has frozen in XnView or Lopesoft does not solve the problem, but Photoshop would hang on the last picture in a directory, so I do not think the problem, I noticed was due to bad data.
I was reading the photos on my home network of a SIN. I transferred photos on a scsi drive connected to the pc (I think about 30 vs 4-Mbit/s). Photoshop imported about 6000 photos. The only difficulty was with a single photo and Photoshop gave me a message that it has been altered and could not be read. This allowed me to continue to import.
Your suggestions of two software look like they may be very useful in the future. If you have any other suggestions for the software I'd appreciate hearing about them.
You are the kind of knowledgeable and helpful person that I always hope to meet in the forums.
Thanks again for your help.
George
Tags: Photoshop
Similar Questions
-
Windows Vista Home Edition of Preimium. I deleted by mistake the wrong USER account. I went back and he added. Still lacks most of the documents and some programs and my e-mail program is missing. I Retored back to an earlier date and is not good, but when I search in the search bar in the start menu, I find the documents but can't seem to them.
Hello
It gives you a warning before you delete an account that you will lose data from it, if you do not save it.
Try this free program to search for these files:
http://www.Piriform.com/Recuva
See you soon.
-
Computer stops responding especially if I have more than 1 page open. Cursor problems, Outlook 2007 running super slow and not very responsive, ran the repair for this tool. Ran Ccleaner, checking virus, Malware, Spybot, clean disk, defragmentation, do a startup repair, chkdsk, and then the tool of sfc. 32-bit Windows system, Dell Inspiron running Windows Vista SP2 with an AMD Athlon X 2 processor.
2009-12-27 17:39:41, Info CSI 000000 d 1 [SR] cannot repair the military record [l:22 {11}] "c:\windows\system32\dllcache\icardie.dll" Microsoft-Windows-IE-Infocard, Version = 8.0.6001.18702, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
2009-12-27 17:40, Info CSI 000000 d 3 [SR] cannot repair the military record [l:22 {11}] "c:\windows\system32\dllcache\icardie.dll" Microsoft-Windows-IE-Infocard, Version = 8.0.6001.18702, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
' 2009-12-27 17:40, CSI Info 000000 d 4 [SR] this element is referenced by [l:216{108}]"Microsoft-Windows-InternetExplorer-8-RTM-Update~31bf3856ad364e35~x86~~8.0.6001.18702.Internet-Explorer-8-x86. '
2009-12-27 17:40, Info CSI 000000 d 7 [SR] could not reproject corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\Windows\System32"\[l:22{11}]"icardie.dll '; source file in the store is also corrupted
2009-12-27 17:56:34, Info CSI 00000196 [SR] cannot repair the military record [l:22 {11}] "c:\windows\system32\dllcache\icardie.dll" Microsoft-Windows-IE-Infocard, Version = 8.0.6001.18702, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
2009-12-27 17:56:34, Info CSI 00000198 [SR] cannot repair the military record [l:22 {11}] "c:\windows\system32\dllcache\icardie.dll" Microsoft-Windows-IE-Infocard, Version = 8.0.6001.18702, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
2009-12-27 17:56:34, Info CSI 00000199 [SR] this element is referenced by [l:216{108}]"Microsoft-Windows-InternetExplorer-8-RTM-Update~31bf3856ad364e35~x86~~8.0.6001.18702.Internet-Explorer-8-x86. '
2009-12-27 17:56:34, CSI Info 0000019 c [SR] could not reproject corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\Windows\System32"\[l:22{11}]"icardie.dll '; source file in the store is also corruptedHello
What antivirus/antispyware/security products do you have on the machine? Be one you ALREADY had on this
machine, including those you have uninstalled (they leave leftovers behind which can cause strange problems).------------------------------------------------------------
Part of the problem is probably SpyBot which can greatly affect the peformance IE and Vista/Windows 7.
Start - type in the search box-> find Services at top - click right on - RUN AS ADMIN
Double-click Service SBSD and change it to MANUAL and STOP
Then run SpyBot and in settings uncheck TeaTimer - close and restart.
Now you can run SpyBot as a scanner at the request.
------------------------------------------------------------
Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html=================================
If you still have performance problems:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes without doing anything - then right click on the task - bar
The task manager - take a look at stored by - Services - process - it is a quick reference (if you have
a small box in the lower-left - show for all users can check only).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG and then display a list of the people here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out what are the files, registry keys and other objects processes have opened, the dll
they loaded and much more. This exceptionally effective utility will show you even owned by each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to startup automatically when your system boots and you
opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
start the settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspxWhatsInStartUP - free - this utility displays the list of all applications that are loaded automatically when Windows
starts. For each request, the following information is displayed: Startup Type (registry/Startup folder).
The command - line String, product name, file Version, company name, location in the registry or the file system,
and much more. It allows you to easily disable or remove unwanted programs that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window Watcher says it all, reporting of any window created by all running programs, if the window is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/I hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
I have a PC with Windows 10 on which I installed Lightroom. Whenever I have open and click Import, disable all the menus and I can no longer move forward. No command is active and I can only leave the program. Please help as soon as POSSIBLE. Thank you.
-gA
Hi gA,.
Please reset the Lightroom preferences and check if that helps.
Reference: How to set preferences for Lightroom
In addition, you can create a new catalog and open Lightroom with that and check if it works.
Kind regards
Mohit
-
No preview image deployed when you try to import new images, no possible imports all the
Hello
I use Lightroom 5.7.1 on a 'Late 2012 iMac' with Yosemite OS X.
I installed Yosemite first and then Lightroom 5.
After that I encountered the first problem (no preview images shown the import module when you try to import new images, the central part of the screen remains black, now shaded not extracted, nothing, no possible to import at all), I tried all possible changes to checkboxes and preference settings.
After reading dozens of Internet Forum articles on very similar problems seem to many other users, I even deleted all preference setting files in the OS X Finder (a recommendation that has been said to succeed), however, the problem remains.
Also, I completely deleted the software entirely from my iMac (including all the system and setting files), downloaded the latest version (5.7.1) Adobe, rebooted the system, installed new Lightroom, even restarted again, WITHOUT SUCCESS.
What could I do? As I can't work at all with Lightroom, I would be very happy to get any help on this issue.
Best regards
Thomas.
If the Destination Panel does not appear.
You must make the Destination panel displayed on the right side by right-clicking one of the other items Panel (like "file management") and then place a check next to the Destination
-
Is it possible to cut all the sounds and haptic feedback when the iPhone is connected to Carplay Apple?
While driving, I noticed that all the comments navigation are also sent to my phone, creating a distraction while driving. Is there an automatic way to stop sending alerts to my watch whil the iPhone is also connected to Carplay?
If this is not the case, consider this as your comments/request. If there is, please share. I do not want to switch manually and on all notifications when you use Carplay.
Best regards
Q
Hello
It may help to place your watch in mode do not disturb before driving:
-On your watch: when the time display, drag upward on the dial of the watch > drag left/right to the gaze of settings > tap the moon to turn do not disturb on and outside.
You can also disable mirroring for do not disturb mode. When mirroring is enabled, turning on do not disturb on your watch also automatically her allow on your iPhone.
-On your iPhone, in the application of Eve, go to: Watch My > General > do not disturb - turn the market / stop iPhone mirror.
To send comments and/or service requests to Apple, you can submit the form here (all comments are read):
https://www.Apple.com/feedback/watch.html
(This is a supportive community focused on user - you don't talk to Apple here).
-
ITunes is downloading all items purchased from my iPhone, including tv shows and movies, using all the memory and batteries, does anyone know how to stop this?
Hi anthony248,
If you don't want the automatic downloads enabled on your iPhone, follow the steps outlined in the article below, except that you will turn off the switch rather than turn them on. I'll also include a link about the storage capacity of your iPhone and how to delete items that you don't want.
Check your storage space on your iPhone, iPad and iPod touch
Take care
-
. Video streaming
I can stream movies on my PC using the desktop PC monitor. But when I unplug the monitor and use a PC to TV HDMI cable I get the video but the audio now... Suggestions?Thanks for the file INF. I ck'ed for driver updates and I have the latest drivers installed. I got the sound working on the TV by hanging the audio output of the PC to the entrance of the TV with the HDMI cable in place for video. It's the simplest solution to this problem, so I took it.
By the way, I have a Dell 620 with windows 7. -
When I close the lid and open it again, my computer freezes
Original title: back to zero problem
I am running Windows Vista Home Premium on a laptop ACER 5570. When I close the lid and open it again, my computer freezes. Just a black screen and nothing that it will restart. I have to close it using the power button, and when I try to launch again the computer does not start upward. I need to reboot with a Vista startup disk. What is my problem?
Have tried to take the battery out and restart, but no go.Hello
I suggest you to follow these steps and check if that helps.
Method 1:
Try to update the latest drivers for the graphics card and check if it helps:
http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctlyMethod 2:
Try to perform the commissioning of repair and check if this may help:
http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questionsIt will be useful.
-
Had upgraded LR 4 to 6 a few months ago. Have updated all the software and am running LR 6.4 and 9.4 Raw. Mac also improved to 10.11.3 software. Camera not too new... Nikon D800e. Always make me the note 'files were imported not because they could not be read ". Any thoughts? Thank you
This means that you don't have WRITE permission in the destination folder.
You should:
- In Lightroom, determine the exact destination folder (it is on the right side of the import dialog box under Destination)
- Change the permissions in your operating system on this specific file WRITE permission; OR Change the destination folder in a place where you don't have WRITE permission
-
Is there a way to flatten all the images and the text when you optimize?
I want to flatten all the images and text (not only those with transparency) in PDF files to ensure that no one can steal my images and work. Are there settings that I can choose when I save as optimized in Acrobat? This is on a Mac. Thank you.
Flattening, but you use that term, does not extract images from a PDF. You can apply security, products from Adobe that will prevent the extraction of content from a PDF file, but that's all. If it is in a document, it can be extracted.
-
I installed creative cloud but it has not installed all the products and when I try to install Photoshop or Lightroom nor install it simply places another version of creative cloud.exe into my list of downloads
You try to install from the Web or Adobe Creative Cloud application?
If you had installed the Adobe Creative Cloud desktop application, launch it and connect.
Once logged in, click on the tab menu Apps.
After loading the list of apps apps, Photoshop and Lightroom and click Install next to him.
Location of the Adobe Creative cloud: C: > program (x 86) > Adobe > Adobe Creative Cloud > VAC > creative cloud.
For more details, see the 2 links above mentioned in the previous post
-
I created a form to fill in professional, with several fields. When I try the form and enter data in a field - it fills the SAME data in all other fields.
Give a unique name to each field.
-
How to trace all the functions and variables Movie Clip
How can I find all the functions and variables available Movie Clip? Thank you
Use the describeType() function.
-
7.0 Photoshop elements Organizer freezes when opening
So, I am very frustrated. I have used this program for onver per year. I recently started experiencing this problem. When I import photos to a folder, the Organizer shows 'generate thumbnails' then freezes. I can't use the organizer at all. I have to use my task manager to close the program. I thought I had solved the problem that I uninstalled the guide then reinstalled. It worked well for a week or two, but then I had to import photos mor to work with and once more I'm back to zero. I use Windows XP and have 1.0 GB of ram... and 1.81 ghz... my laptop has less GHz and works very well with PSE, so I do not understand? It's the same syatem I use all; the long and now I have a problem. Can someone please help?
Launch the Welcome screen of your desktop shortcut or "C:\Program Adobe Photoshop Elements 7.0\Photoshop éléments 7.0.exe". It will launch your homescreen for PSE7. Now, press on and hold alt + shift + ctrl set keys and click the Organizer button to start the Organizer. It will show you the dialog of catalog management. Click the new button, if the right upper side and give a name to create a new catalog. By clicking OK, it will launch the organizer with your new catalog.
Maybe you are looking for
-
Hi, I made a bunch of supposed to upgrade and get rid of the incompatible add ons, etc., now that I've lost my progress bar data and there's a box boring biggish, in the lower left corner, my computer describing every piece of data is zoom through wh
-
I can't find a command "go to" pages as exist in Word. (for example, on page 163). I find it necessary to move easily large documents.
-
A speech synthesis in Java engine. to make it compatible SAPI, a wrapper on the current engine was built in C++ using Microsoft Visual Studio 2010. STDMETHOD (Speak) to the wrapper makes a call to the function of speech synthesis on the TTS engine. H
-
Error message from windows 7 + 0 × 8007007B record lost on system protection
I lost an important file on the desktop of my PC. I have Windows 7 as operating system. When I tried to do system restore, it asked me to turn on system protection. When I tried to do, I got the error message 0 × 8007007B. Please help me, I need this
-
I can connect to wifi networks but cannot access the internet
As the title says, I have no problem connecting to all types of wireless (password protected or not), but once I plugged in, there is always a message saying that I have limited access, and I will not be able to access internet since. It is not a pro