Works with Windows Vista SP2, constant freezing, jumped through all the hoops and now it seems to be corrupted files after that I ran the sfc.scannow.

Similar Questions

• discs made with WIndows XP, but none does not work with Windows Vista

  I have many discs made with windows XP and now none will work with windows VISTA, does anyone have an idea, I tried for weeks now, alll over the internet, but nothing, can someone help, because I need these files on CD RE-WRITER and RE-ENGRAVER of DVD discs.

  Hello

  ·         You get the error message?

  Follow these methods and check if that helps:

  Method 1:

  I suggest you run the Microsoft Fixit tool from this link and if it helps.

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems

  Method 2:

  Follow the steps in troubleshooting this article and check if that helps:

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista

  http://support.Microsoft.com/kb/929461

• lovely better does not work with windows vista home Premium what another program removes LSO and HOW to prevent the trackers?

  Question
  better privacy does not work with windows vista home Premium that another program removes LSO and HOW to prevent the trackers? Edit
  Details

  In current versions of Flash you can also do this via the control panel.

  • Control Panel > Flash Player, click on remove and erase data

• Cipher.exe to overwrite the data deleted in Windows works with Windows Vista?

  Cipher.exe to overwrite the data deleted in Windows works with Windows Vista? He worked under Windows 2000, but not sure about Vista!  Otherwise Vista contains a command to clean free space HDD?

  Hello

  you need 3 of third party programs to clean free hard drive space

  For your question:

  always check the compatibility of vista programs on the link below

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  If a program is compatible with vista you can try right click on the setup.exe, and then selecting run as administrator

  It is not compatible with vista, you can try running it in a previous operating system mode

  This does not work for all programs

  read the information below

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

• the recovery came with my compaq presario cq60 dx211 disks would work with windows vista home premium. the recovery disk, I was created when I had windows vista home basic.

  Windows Vista Home Basic to home premium compatibility

  the recovery came with my compaq presario cq60 dx211 disks would work with windows vista home premium. the recovery disk, I was created when I had windows vista home basic.

  How is - happen you to Vista Home Premium.  No, they will reinstall Home Basic.

• Why CRYSTAL_REPORT program does not work with windows Vista? __

  Why CRYSTAL_REPORT program does not work with windows Vista?

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  If this is not Vista compatible, read the info on the link above.
  It works for some programs, but not all.

  This applies to software programs, NOT hardware drivers.

  If it's Vista compatible > uninstall it > Re-download/save to your desktop > right click on the setup.exe > run as admin.

  See you soon.

  Mick Murphy - Microsoft partner

• forgotten user password to connect to the computer that works with Windows Vista Home

  version Windows vista home my daughter composed of a password that she can't remember now, we can't access the computer.  How to enter and reset this password without factory default and lose all the images and files?

  You can change your password to something that you remember another administrative user account. If you had only an administrative user account and you have forgotten the password, all is not lost. You can then follow the general recommendations for implementing user accounts in Vista that I will give you at the end of this post.

  All this requires a certain level of computer skills. You know better and that take the machine to a competent local computer tech (not a type of BigComputerStore/GeekSquad place) is the best solution for you.

  If you have an installation of Vista DVD (not a recovery DVDs), you can start the system with it. Select the default language, then select "repair your computer". Then select "Command Prompt". At the command prompt, type:

  NET user administrator / Active: Yes [press Enter]
  NET user [insert here the name of your user account] [insert the new password of user as 1234 here] [press Enter]

  [Note: do not enter the brackets!]

  Remove the installation DVD and restart the computer. Now, you will be able to connect to your user account by using the password that you set; for example, 1234.

  If you do not have a Vista installation DVD (only have a recovery disk), the computer mftr. may have given you the option to repair Vista (not a system recovery!) system in the diagnostic menu. This menu of diagnosis is the same one where you can choose Safe Mode. Get to this menu by repeatedly pressing the F8 key as the computer starts. If you do not have this option, you can make a bootable Vista file repair DVD in this link:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Note: All the Neosmart recovery disk downloads are torrent files. There is a good explanation of the torrent on the site Web of Neosmart files. You will need a torrent as muTorrent client to get the files. Torrent client will download the .iso file with which to create the bootable DVD. You will need to use third-party burning software such as Nero, Roxio or the free ImgBurn (http://www.imgburn.com ) to burn the image .iso image file, not in the form of data.

  Once you have fixed things, log on to the additional administrative account you will be made by the suggestions below and disable the administrator account integrated yet for security reasons:

  Start Orb > Search box > type: cmd
  When cmd appears in the above results, right-click and choose "Run as Administrator" [OK]. Now, you will get the command prompt. At the command prompt, type:

  NET user administrator / active: No. [Enter]

  Exit the command prompt.

  General recommendations for creating users in Vista:

  You absolutely don't want to have only one user account. As XP and all the other modern operating systems, Vista is a multi-user system with integrated system of accounts as default Administrator and comments. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want one account user with administrative privileges on Vista because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult.  It is not impossible to activate the built-in administrator to rescue things, but there may be more that you want to do. Better not to put you in a bad situation at first.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. As a user Standard is recommended for security reasons and will help protect your computer against infections. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.

  If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:

  Start Orb > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null). MS - MVP - Elephant Boy computers - don't panic!

• Lightroom 4 runs on a pc with Windows Vista SP2, Intel Core 2 Duo T8100 - 2.10 GHz-4 GB RAM - NVIDIA GeForce 8400 M GT with 256 MB of memory? THX

  Lightroom 4 runs on a pc with Windows Vista SP2, Intel Core 2 Duo T8100 - 2.10 GHz-4 GB RAM - NVIDIA GeForce 8400 M GT with 256 MB of memory? THX

  Vista is spec'd for Lightroom 4.  Check the requirements of the system through the following page:

  System requirements | Lightroom

• Photoshop elements 13 works with windows vista?

  I have a Windows Vista computer that is fast and paid for, and V10

  Thinking of buying a new software from Adobe.

  Photoshop elements 13 works with Windows Vista?

  No. Windows 7 or 8.x only Windows.

  System requirements | Adobe Photoshop Elements

• came loaded with Windows Vista Home Premium. Recently, I reformatted the hard drive and did a clean installation of Windows 7 Professional. I have no games. No solitaire, Minesweeper, no nothing.

  original title: lack of games
  I have an Acer Aspire PC. It came loaded with Windows Vista Home Premium. Recently, I reformatted the hard drive and did a clean installation of Windows 7 Professional.

  I have no games. No solitaire, Minesweeper, no nothing.
  How can I, without seeking to erase and reinstall again?

  To activate the built-in Windows 7 games:

  1. click on Start (lower-left) and then on Control Panel.

  2. click on programs and features.

  3. on the left side of the screen, click on 'Windows turn features on or off".

  4. find the entry called games & check the box next to it.

  5. click on OK.

  6 reset.

  If the games box is already checked, uncheck the box , click OK, restart, then do steps 1-6 above.

• Logitech webcam C250 with windows vista sp2

  I have webcam C250 logitech that does not load the software bundled with it or the logitech website or the update driver, s the windows update try, s to load when I put the CD to load the software, I get an error 800f020B code. I have windows vista sp2.

  Hi Scott Choate.

  Have you an error when you try to install the software?

  See this link for more information about Update error 800F020B:
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-800f020b

  Click on the link below and run the Fixit diagnostic tool to fix the problem automatically.

  Hardware devices not detected or does not:
  http://support.Microsoft.com/GP/hardware_device_problems

  Kind regards
  Afzal Taher-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Printer does not work with Windows Vista

  My HP Deskjet2540 all in one printer will print with windows vista. Ive tried printing from excel, works and all I get is a blank sheet. Sometimes I get some very weak marks. I have a lot of ink, I uninstalled and reinstalled only to get the same result. However, I can print something on the internet and I can print a test page. I get no error message.

  Hi cat22,

  Thank you for visiting the Forums from the HP Support! I see when you print from Excel to your HP Deskjet 2540 printing comes empty or with very weak lines. You have a lot of ink, and you have no problem printing from other programs. You tried to uninstall and reinstall the software without success.

  I would like to first you attempt to change the quality setting, you can have currently set to normal, we will try to print in optimized mode and see if that helps:

  1. go to your Start Menu

  2. go to your devices and printers

  3. right click on your DJ 2540 and navigate to Printing Preferences

  4. click on the paper/quality tab

  5. Select the best mode

  6. click on apply

  Now try printing from Excel, you still get blank pages? Please let me know the results if you are still running into errors let me the following information:

  1. What is your current operating system, Windows or Mac and what version?

  2. What is the connected USB printer or wireless?

  3. are there any exceptional computer upgrades that have not been installed?

  I hope hear from you soon.

• FireFox works with Windows Vista?

  Question is not on the machine I use now - so I did not open the window "troubleshooting." The question is about old computer Vaio laptop to my wife with Windows Vista operating system. He travels very slowly. You may want to use FireFox and possibly the speed of navigation. Use Chrome now and want to move tabs and bookmarks (etc.).

  Is it possible and it might make the system a little faster?

  Hi Earl,
  Yes, Firefox is supported on Windows Vista and it will be important in that its power to Chrome.

• HIDData.exe has stopped working in Windows Vista SP2

  I am running Windows Vista w/SP2 on a Compaq CQ70 w/an Intel T3200 2.0 ghz processor. I recently installed a USB Bluetooth device. I get the error "HIDData.exe stopped working" reported before with a USB Bluetooth mouse. Every avenue, I used to try to find a solution show KB941600 cumulative update installation. However, when I started to install the update, I learned that it is applied to a different operating system than the one on my computer. I guess that's because it applies to Windows Vista without SP2 installed. Is there a way to solve this problem for the updated Vista version?

  Hi IXOYE4Us,

  This error may occur due to the old version of the HP Quick Launch Button software. If you have installed a HP Quick Launch toolbar, then you can try to disable the toolbar HP Quick launch at startup or uninstall it and check.

  You can try to perform a clean boot and try disabling the HP Quick launch at startup toolbar.

  For more information about execution of boot, you can consult the following link:

  http://support.Microsoft.com/kb/929135

  You can also view the following link to uninstall a program:

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Flash player 10 does not work on windows vista sp2, any NPSWF files found in the system as well

  Hi, I use windows vista, downloaded flash player 10 several times but it will never work.

  just updated to SP2 today after reading the other popular solution here, but it still will not work.

  I use IE 8, went to C:/windows/system32/c:\windows\system32\macromed/flash on my computer but it

  is not NPSWF files at all.

  There are those I have flash10e.ocx install.log, flashUtil10e.exe, uninstall_activeX.exe

  and trust flashplayer with rpconverter.ctg in her file.

  Please help me with this, thanks a lot!

  Hi candy, happy you found that Shockwave Flash Object, it works with Flash files and is very important

  NPSWF files you said aren't there, those who are for the browser Firefox or Chrome or any other browser. If you use Firefox and you want the Flash Player to do this, close all your browsers if you are looking only at your office.

  Click on the Flash Player for Firefox installer and save it on your desktop. Then run it from your desktop, and after it is finished installing, restart your computer.

  Then using Firefox go to the plug-ins and find a SWF vs 10.0.45.2 and make sure that this option is enabled. It's like the Shockwave Flash for Internet Explorer object, but it is one that works with Firefox.

  I would like to know if this is what you wanted to do. If you do not use Firefox, but Chrome or any other browser, this will work for that one also.

  If you do not use another browser, then do this. I have just thot maybe that you did and that is why you were concerned that the NPSWF files were not there.

  Thank you

  eidnolb