Outgoing sample does not create a output file

Similar Questions

• does not create a pdf file

  I was happy with trial Pro XI and therefore purchased the monthly version that I downloaded.  But it does not create a PDF file.  It is impossible to find any exisitng document, in word or any other form.  I stopped and restarted.

  Thanks a lot for your concern. Prashant using Adobe got on with me and fixed an issue with my office.

• First SDL application on the playbook, builds, but does not create a binary file.

  /*This source code copyrighted by Lazy Foo' Productions (2004-2012)
  and may not be redestributed without written permission.*/
  
  //Include SDL functions and datatypes
  #include "SDL.h"
  
  int main( int argc, char* args[] )
  {
      //The images
      SDL_Surface* hello = NULL;
      SDL_Surface* screen = NULL;
  
      //Start SDL
      SDL_Init( SDL_INIT_EVERYTHING );
  
      //Set up screen
      screen = SDL_SetVideoMode( 640, 480, 32, SDL_SWSURFACE );
  
      //Load image
      hello = SDL_LoadBMP( "hello.bmp" );
  
      //Apply image to screen
      SDL_BlitSurface( hello, NULL, screen, NULL );
  
      //Update Screen
      SDL_Flip( screen );
  
      //Pause
      SDL_Delay( 2000 );
  
      //Free the loaded image
      SDL_FreeSurface( hello );
  
      //Quit SDL
      SDL_Quit();
  
      return 0;
  }
  

  This generates without error, but does not generate a binary file to get started. Only a .o

  Any suggestions?

  EDIT: I am also including TCO with her. It's trip over. Did I miss something in my code for TCO runs correctly?

  C:\Users\Acer\Desktop\TouchControlOverlay\Device-Debug/libTouchControlOverlay.so: undefined reference to `png_create_read_struct'
  C:\Users\Acer\Desktop\TouchControlOverlay\Device-Debug/libTouchControlOverlay.so: undefined reference to `xmlStrncasecmp'
  C:\Users\Acer\Desktop\TouchControlOverlay\Device-Debug/libTouchControlOverlay.so: undefined reference to `xmlDocGetRootElement'
  C:\Users\Acer\Desktop\TouchControlOverlay\Device-Debug/libTouchControlOverlay.so: undefined reference to `png_init_io'
  C:\Users\Acer\Desktop\TouchControlOverlay\Device-Debug/libTouchControlOverlay.so: undefined reference to `png_get_image_height'
  C:\Users\Acer\Desktop\TouchControlOverlay\Device-Debug/libTouchControlOverlay.so: undefined reference to `png_get_image_width'
  C:\Users\Acer\Desktop\TouchControlOverlay\Device-Debug/libTouchControlOverlay.so: undefined reference to `png_create_info_struct'
  C:\Users\Acer\Desktop\TouchControlOverlay\Device-Debug/libTouchControlOverlay.so: undefined reference to `png_set_tRNS_to_alpha'
  C:\Users\Acer\Desktop\TouchControlOverlay\Device-Debug/libTouchControlOverlay.so: undefined reference to `png_set_longjmp_fn'
  C:\Users\Acer\Desktop\TouchControlOverlay\Device-Debug/libTouchControlOverlay.so: undefined reference to `png_read_image'
  C:\Users\Acer\Desktop\TouchControlOverlay\Device-Debug/libTouchControlOverlay.so: undefined reference to `png_set_palette_to_rgb'
  C:\Users\Acer\Desktop\TouchControlOverlay\Device-Debug/libTouchControlOverlay.so: undefined reference to `xmlReadFile'
  C:\Users\Acer\Desktop\TouchControlOverlay\Device-Debug/libTouchControlOverlay.so: undefined reference to `xmlFreeDoc'
  C:\Users\Acer\Desktop\TouchControlOverlay\Device-Debug/libTouchControlOverlay.so: undefined reference to `png_read_info'
  C:\Users\Acer\Desktop\TouchControlOverlay\Device-Debug/libTouchControlOverlay.so: undefined reference to `png_set_bgr'
  C:\Users\Acer\Desktop\TouchControlOverlay\Device-Debug/libTouchControlOverlay.so: undefined reference to `xmlCleanupParser'
  C:\Users\Acer\Desktop\TouchControlOverlay\Device-Debug/libTouchControlOverlay.so: undefined reference to `png_destroy_read_struct'
  

  EDIT: missed me png and xml2

  It seems to be missing the library 'png' on the link phase. Can you confirm for me that the link against it?

  Go into the settings of your project, build C/c++, select tab "settings of the tool. You will see the folders 'QCC Linker, libraries' on the list. You must have "png" it.

  Another way to check is when you compile look at the last line (the link phase, starting with "qcc o", you should see a '-lpng ' modifier.)

• Creating a new Bootstrap document does not create required dependent files.

  I work on a Mac under OS X Yosemite (10.10.4) and Dreamweaver CC 2015. I followed all the items available on how to implement a new startup as well as verified document for issues known in Dreamweaver and looked through the Dreamweaver forum.

  I need some advice regarding the creation of a new Bootstrap document in Dreamweaver CC 2015. I followed using Dreamweaver's article "Working with the Bootstrap Files" (https://helpx.adobe.com/dreamweaver/using/bootstrap.html). I followed the instructions precisely to create a new Bootstrap document without any pre-built model extra. I used the "create a new" option in the Startup dialog box tab new document, does not make use an available pre-built, made a minor change to the width in pixels of the screen of medium size under the Customize menu and click on the create"" button. Dreamweaver then prompted me to save the associated CSS file that I saved as "styles.css" in the "css" folder file root of my newly defined site. Dreamweaver has not created a new CSS file called 'styles.css' in the location I've just specified, has not added any dependent Bootstrap files in the folder root of the site except "bootstrap.css" (added in the "css" folder) and left me confused as to how to get started with this feature. Please let know us if there are additional configuration steps or things to watch during the creation of a new "bootstrap" page/site. It's frustrating because I'm eager to try this new potentially important feature. I thank you in advance for any help, you can give me.

  Hi Nancy,.

  Thanks for your comments. Everything you said is true, but it does not directly concern the question I had.

  It was a conflict more profound by which I had a wrong folder in my hard drive that had the same name as the hard drive itself. This prevents any local dependent files open in Dreamweaver: https://forums.adobe.com/message/5633342#5633342#5633342 I assume that the file was somehow created when I updated my OS before installing the latest version of Dreamweaver.

  In addition, this can cause problems when you set up a new boot environment and have prevented the necessary being created dependent files as I said originally. The files are added to your local disk with a status of 'read only' applied to the primary Bootstrap CSS file to prevent replacement.

  Thank you for your help and have a great day!

• Re: Ripple does not create a .cod file

  Hello

  Please I need your help with HelloWorld - need to know how you packed. I get the error message
  Oh, Snap! Build request failed with the message: C:\Program Files (x 86) \Research In Motion\BlackBerry WebWorks SDK 2.3.1.5 is not a valid path

  I use BlackBerry WebWorks 2.3.1.5 SDK and Toolkit jdk1.7.0_21.  The device is the Blackberry Curve 9350 and the Blackberry OS is 7 v. I'll run a simulator first Blackberry Curve 9350

  Thanks in advance

  Marc

  Hi Marc,

  Please note that our tools need JDK6 (latest version is fine) and it must be 32-bit.

  As for the previous post, we will eliminate ripple of the equation for a moment. Just waving calls the command line, so if we do follow the work in the command line, shoulud to ripple. Can you please:
  -ZIP your project folder (so your config.xml is originally from the zipper).
  -Copy your ZIP file in your folder SDK WebWorks (i.e. same folder as bbwp.)
  -Open a command prompt and navigate to the folder SDK WebWorks.
  -From the command prompt, run the script: bbwp MyApp.zip

• HelloWorld app - could not create the .bar file

  I went through the helloworld application, but it does not create the .bar file.

  The code is ok as its condition, the settings are correct and I've activated bbwp to run as admin and java.exe with the back of the RIM.

  In Wellington, when I click on the package or package & sign or package and launch using the emulator, the same thing is happening: (I use Windows 7) it promts launch me bbwp.exe as admin and I click Yes, then the command line performs generation, seems complete construction okay, said the generation succeeded, but only generates a zip file and does not create a .bar file , or if I try to run on the emaulator - does not launch. I also tried the same thing from the command line and the same, it does not create the. bar.

  can anyone help?

  Problem solved in java unistallin and reinstall Java SE 6 Update 38 and changing UAC settings

• LabVIEW 2014 app installer doesn't create files % 2Ffiles in the documents and does not create the registry entries at least as administrator

  the LabVIEW 2014 32 bit app installer doesn't create folders/files in personal documents folder and does not create the registry entries in hkey_current_user\software except as an administrator.

  It's a true statement.

  You must change the windows policies, user restrictions (not recommended), normally the register (write) access is limited to normal users.

• OfficeJet 4500 scan does not create a file on disk

  Recently purchased, this replaces a PhotoSmart HP 2570, no problem with the software install, printer setup, network (ethernet connected), etc. Print and copy of work. Did not try the fax. Scan to file (pic to file) does not create a file on the disk that you use the HP Solution Center or on the button scan Panel before starting the scan.  "Preview scan" and "launch Windows Explorer in the save location after saving the files" are both checked.  I also used different 'save locations' and even created a new subfolder "temp1" from the root C: and set security to be "full control" for all of the listed users.  During a scan, all works well until and including the scan preview projected.  When "Finish" is selected, a progress dialog box is shown with a message to «Finish the scan of the computer...» "reasonable given the"Save location"by which the progress bar gets about 2/3 full and then disappears.  Windows Explorer does not start in the save location and there is no file created anywhere on the disk.

  Appreciate sincerely all serious and constructive comment.  If I don't get this resolved, I need to go back and return to the PhotoSmart...

  Download and run this HP critical update for their software v13.

• When I import my .wav and my .m2V files still accepts the .wav file but does not load the .m2V file.  I created movie DVD 5 discs - still accepted the .wav and for the four remaining groups .m2V files and created 4 DVD discs for

  When I import my .wav and my .m2V files still accepts the .wav file but does not load the .m2V file. I created movie DVD 5 discs - still accepted the .wav and for the four remaining groups .m2V files and created 4 DVD discs for these files. What can I do to be free from this error?

  OSstatus = error-37

  Note that this a Mac operating system error.

  http://forums.CreativeCOW.NET/thread/145/865447

  Error when importing the file: slash or other character in file name

  http://forums.Adobe.com/message/3729601

  The build error: slash or other character in file name

  http://forums.CreativeCOW.NET/thread/145/868994

  The build error: complete startup disk

• Movie Maker does not recognize the MPEG2 files that are created from my new video camera. What can I do?

  I bought a new video camera and Movie Maker on my computer does not recognize the MPEG2 files as video files. He brings only in the sound. Is there something I can do?

  I bought a new video camera and Movie Maker on my computer does not recognize the MPEG2 files as video files. He brings only in the sound. Is there something I can do?

  ======================================
  You run Vista Movie Maker 6? Might be interesting to try
  Convert MPEG files to WMV format before importing.

  Or... it may be interesting to try to install Windows Live Movie Maker...
  which could be compatible with the MPEG2 files.

  Windows Live Movie Maker
  http://explore.live.com/Windows-Live-Movie-Maker
  (There are other applications included in the download...
  Uncheck the ones you don't want)

  Good luck...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• APX1099 process does not respect the "output Destination.

  Hi friends!

  I have run the APX1099 process to print COPY B 1099 files and I'll put the 'output destination' until I run it:

  P.S. I have administrative privileges for this directory.

  

  But the files are generated in a different directory and I can not find where this directory has been created (\appserv\prcs\psdev\files\XMLP). The process does not have the 'output destination' that I put forward.

  Does anyone have an idea what could be causing this problem?

  P.S. The output location in report definition routine is defined as "all":

  

  Thank you very much for your help!

  Kind regards

  Tarsio Alvares

  Tarsio Alvares based on code, I see in the App Engine, writing of file is not managed.

  

  You can see that OutDestType = 6 (Web) and % OutDestType = 3 (printer) are dealt with. Technically, should also have some code for % OutDestType = 2 (file) to cover for the file option.

  You will need to write the following code to operate temporarily. Moreover, wear it like a SR with Oracle that this appears to be a delivered report and should be able to print to file.

  If OutDestType = 2 Then %

  & REPORT_DEFN. OutDestination = FilePath %;

  End - If;

  As follows:

  

  Let us know if that helps. Once I added this code, it seems to work very well when I'm printing to a file. Thank you!

• Does not create a folder takes during recording

  I'm working on a project in logic. When registering, I usually use cycle check and choose the best catch in the take folder. For a case in the song, I found it easier to use punch in recording. I don't know what other changes I might have inadvertently done, but now that I go back to the recording of the cycle, it records in cycles, but does not create a take folder. Punch in the feature is disabled and all my settings registration are set to 'Create takes the file. " Please help, thanks

  It fixed... The button replace was turned on... always wondered what was done.

• Could not create the work file. Check the temp environment

  After I did my Vista SP2 update, the only thing I could do was to reformat the HD. After all, including Office 2007 reloading, Outlook and work has worked well. Again, I went through the updates, Vista and Office SP 2 and now in Outlook and Word I get this error message Outlook (Word) could not create the work file. Check the temp environment

  variable. I am alos having other problems in Word. Help, I can't find all the answers!

  Follow the steps below at our own risk.  Set a restore point before doing this. Make a mistake in the registry can have bad results

  In your registry HKEY_CURRENT_USER\Software\Microsoft\Windows\Current Version\Explorer\User Shell Folders\Cache Database Cache data value must be %USERPROFILE%\Local Settings\Temporary Internet Files

  Close all programs. Then in the registry editor, once you get in the folder above, right click on "Cache", make a left-click on "Change", paste in "%USERPROFILE%\Local Settings\Temporary Internet Files" (without the quotes), on the left, click 'Ok' close the editor of the register. Restart the PC.

  This should solve your problem.

  - Http://blogs.msdn.com/powlo/archive/2007/01/01/fix-for-error-outlook-could-not-create-the-work-file.aspx

  a. start-> Run-> enter "regedit" and press "Enter" to run the program to change registry variables.

  b. navigate to the folder-> "HKEY_CURRENT_USER\Software\Microsoft\Windows\Current Version\Explorer\User Shell Folders\Cache"

  c. check the values of variables [for everything in the "User Shell Folders" folder] - all the variable should have values from '% USERPROFILE%\ '. ». Any variable that is not of this starting point is probably damaged. In my case, all variables corrupt has been a correspondent of "Backup_VariableName". Example: my variable "cache" was damaged when there is a variable called 'backup_cache' with the correct values

  d. change the value of variables corrupt to correct the values. Example of change variable value "cache" in "%USERPROFILE%\Local Settings\Temporary Internet Files" and so on.

  e. close all of Ms Office programs, and turn. The problem should be solved now.

  I added the text in square brackets [] above.

  Microsoft partner - "gentlemen, you can't fight in here! This is the war room. »

• ODI-15005: data type "varchar" does not close in technology: file?

  Hello

  I created the interface that loads data from flat file (source) oracle (target).

  For this, I took LKM SQL FOR SQL and SQL TO ADD FILE IKM.

  Please check the source and target data types.

  

  When I am executing this interface, I get the error as

  ODI-15005: data type "varchar" does not close in technology: file.

  
  

  To resolve this error, I changed the types of flat file data.

  I went to the Manager of topology-> select technology of files-> data types: string - > orcle to the number data type.

  Even if I do not correct this error. Please help me.

  
  

  Thanks in advance,

  A.Kavya.
  

  Hello

  Can you please check what are the data types for the columns in your data target store. As you say it's a file, can you check if the data type for the two columns has the String value (and not varchar).

  Thank you

  Ajay

• I bought a Canon 70 d. Photoshop CS5 extended does not load the CR2 files. I installed Camera Raw 0.2. Help

  I bought a Canon 70 d. Photoshop CS5 extended does not load the CR2 files. I installed Camera Raw 0.2. Help

  Photoshop CS5 is only compatible with Camera Raw to version 6.7. Photoshop CS5 is is no longer updated by Adobe. The best way to have the latest version of Photoshop is to his scribe for the package of creative photography of cloud. This would have the latest version of Photoshop and Lightroom. You will receive updates of these two programs through the creative cloud.

  If you don't want to upgrade your Photoshop you can download and use the DNG Converter last to create digital copies of (DNG) negatives of your raw images. You would be able to use these files with the software you already have. But you won't receive updates for the software you are currently using. Your new device photo, the 70 d, requires camera Raw 8.2 which is only compatible with Photoshop CS6. Camera Raw 9.2 is only compatible with Photoshop CC 2015, which is only available through the creative cloud. You might want to consider the purchase of 14 Photoshop elements as a complementary program to what you use.