OutlineLoad utility not only loading text or dates in Hyperion Planning

Good afternoon

I tried several times to use the Outlineload utility to load the text and dates in an unsuccessful planning application. I use the Version of EPM: 11.1.2.1. Here are the steps I took:

1. in EPMA, created a new Member, CommentsText, under the accounts dimension and all its data type 'Text' and then deployed the application.

2. has created the following source file:

Pilot Member, value, perspective, loading data Cube name

CommentsText, go to my comments, here, ' Jan, FY10, USD, real, Final, C101 ", BUD_IS

While preparing the source file, I made sure all the dimensions were represented by one member at the lower level.

3. I ran the command below to the DOS command line:

OutlineLoad S:Localhost A:PLN_GAL /U:admdem / m /I:d:\temp\loadtext5.csv /TR /L:d:\temp\Outlineload-log.log /X:d:\temp\Outlineload-exceptions.exc

See the command to run successfully. This is what the log file:

[Thu Sep 26 19:16:36 CDT 2013] Input file located and opened successfully "d:\temp\loadtext5.csv".

[Thu Sep 26 19:16:36 CDT 2013] Record header fields: pilot Member, value, perspective, loading data Cube name

[Thu Sep 26 19:16:36 CDT 2013] Finds and uses the 'OFADataLoadDimension' size for loading the data in the application 'PLN_GAL '.

[Thu Sep 26 19:16:36 CDT 2013] The parent-child command option (switch/h) will not be performed: this option is not available for the dimension "OFADataLoadDimension."

[Thu Sep 26 19:16:36 CDT 2013] Member from input command (switch/o) option file will not be performed: this option is not available for the dimension "OFADataLoadDimension."

[Thu Sep 26 19:16:38 CDT 2013] A refresh of the cube operation will not be run.

[Thu Sep 26 19:16:38 CDT 2013] Create filters for safe operation will not be performed.

[Thu Sep 26 19:16:38 CDT 2013] Look at the files of newspapers of Essbase to status if Essbase data have been loaded.

[Thu Sep 26 19:16:38 CDT 2013] Planning of vector data store finished loading processes. 1 data record has been read 1 record of data have been processed, 1 has been loaded successfully, 0 is rejected.

But even if the log indicates that the comments were written, no text is written!

Two possible problems, I've noticed are:

1. the logs says: "located and using"OFADataLoadDimension"dimension for the loading of data into the application"PLN_GAL" I don't know what can be the dimension "OFADataLoadDimension."

2 even if I put the text in EPMA data type, the data type is NUMERIC - NOT TEXT and more once I have deploy the application and check with the console service Regional. This blows my mind. I don't know why this is happening.

Can someone please help? I tried A to Z for 2 days without success.

Thank you!

Luis

I suppose that you have set the order of evaluation in EPMA - Parameter Data Type evaluation order

To be honest that I have not used the utility outlineload to load the data when planning is EPMA mode, only in classic mode, in theory, it should work as it isn't metadata and data but not something that I tested.

See you soon

John

http://John-Goodwin.blogspot.com/

Tags: Business Intelligence

Similar Questions

Load data into Hyperion Planning problem with police? Thai tank.
Hello

Can someone help me I just load the ODI in Hyperion Planning data; However, it has char Thai in my data. When I see data in Hyperion Planning, char Thai converts? instead. So, how can I load data without problem of tank with ODI fonts? Any expert! Please help me for this

< img src = "http://img10.imageshack.us/img10/6087/20090316155228.th.png" border = "0" alt = "Free Image Hosting at the www.ImageShack.us" / >

< img src = "http://imageshack.us/img/butansn.png" alt = "QuickPost" border = "0" > QuickPost this image to Myspace, Digg, Facebook, and others!

In Journal of Hyperion, there is no error here

2009-03-16 15:14:47, 847 [DwgCmdExecutionThread] INFO: Oracle Data Integrator adapter for Hyperion Planning - free 9.3.1.1
2009-03-16 15:14:47, 847 INFO [DwgCmdExecutionThread]: connection to the planning application [Budget] on [192.168.3.20]: [11333] using [hypadmin] username.
2009-03-16 15:14:47, 925 [DwgCmdExecutionThread] INFO: successfully connected to the planning application.
2009-03-16 15:14:47, 941 INFO [DwgCmdExecutionThread]: loading for the charge of planning options
Name of the dimension: location like Parent child: true
Order By entry load: true
Update the database: false
2009-03-16 15:14:48, 019 INFO [DwgCmdExecutionThread]: beginning of the loading process.
2009-03-16 15:14:48, 019 DEBUG [DwgCmdExecutionThread]: number of columns in the result set of source does not match the number of columns planning targets.
2009-03-16 15:14:48, 066 [DwgCmdExecutionThread] INFO: type of load is a [member of the load dimension].
2009-03-16 15:14:48, 285 INFO [DwgCmdExecutionThread]: circular reference detected Possible, abandonment of sort and continuing with load. 1368 possible circular reference documents found.
2009-03-16 15:15:14, 660 INFO [DwgCmdExecutionThread]: load the process is complete.
2009-03-16 15:27:45, 821 [DwgCmdExecutionThread] INFO: Oracle Data Integrator adapter for Hyperion Planning - free 9.3.1.1
2009-03-16 15:27:45, 821 INFO [DwgCmdExecutionThread]: connection to the planning application [Budget] on [192.168.3.20]: [11333] using [hypadmin] username.
2009-03-16 15:27:45, 883 [DwgCmdExecutionThread] INFO: successfully connected to the planning application.
2009-03-16 15:27:45, 899 INFO [DwgCmdExecutionThread]: loading for the charge of planning options
Name of the dimension: location like Parent child: true
Order By entry load: true
Update the database: true
2009-03-16 15:27:45, 962 INFO [DwgCmdExecutionThread]: beginning of the loading process.
2009-03-16 15:27:45, 962 DEBUG [DwgCmdExecutionThread]: number of columns in the result set of source does not match the number of columns planning targets.
2009-03-16 15:27:45, 993 [DwgCmdExecutionThread] INFO: type of load is a [member of the load dimension].
2009-03-16 15:27:46, 165 [DwgCmdExecutionThread] INFO: circular reference detected Possible, abandonment of sort and continuing with load. 1368 possible circular reference documents found.
2009-03-16 15:28:14, 540 [DwgCmdExecutionThread] INFO: planing cube refresh initiated.
2009-03-16 15:28:22, 993 INFO [DwgCmdExecutionThread]: planning of the cube refresh operation completed successfully.
2009-03-16 15:28:22, 993 INFO [DwgCmdExecutionThread]: load the process is complete.
Hello

I'm glad you find the blog useful.

I understand that you use 9.3 and to prove that it is not a question of ODI, log into planning from the web, add one manually with thai characters, then refresh the application to push information to essbase, then look at the Member in EA.

See you soon

John
http://John-Goodwin.blogspot.com/

Copy of data in Hyperion Planning time consuming
Hi all
Hello.
I use copy of data in hyperion planning (11 1 2 2) to copy from one scenario to another selection account annotations and supporting details.
The essbase copy of the completed data (checked sessions) part, but when I checked the console work in planning, he said: treatment for more than 2 hours.
My planning java heap size is 1.5 GB and the backup database is SQL server

My suspicion is that the issue was with sql backend. but I have no where to start.
anyone can guide me please.
It get connected in the HSP_JOB_STATUS table. I think that it disappears once you restart Planning.

Why do we not use port no. 11333 for Hyperion planning?
Why do we not use port no. 11333 for Hyperion, planning for metadata by ODI?
More, what you need to know, when you deploy planning you will see that there is a process of 'Java RMI Registry' / service, it works on port 13333. The planning adapter communicates with the RMI registry and then communicates with the planning. If you need to know more, then look for "Java RMI" on the internet.

See you soon

John
http://John-Goodwin.blogspot.com/

Creating a data server - Hyperion Planning
Hello

In the old 10.3 ODI, in physical Architecture we would right click on Hyperion Planning in "physical Architecture. Then we entered name, Server (database server), user and password. Downstairs there are buttons: OK, cancel, apply, help and test. Then, when you have selected OK here a new window emerged where you can enter the request (catalog), request (catalogue of work) on the definition tab. Then go to the tab context and add context and the logic diagram.

In ODI 11.1.1 is a different GUI and I am confused how to proceed. I right click "Planning of Hyperion" under physical Architecture section and select "new Data Server. Fill in the 'name', 'Server (data)', 'User' and 'Password '. What I'm doing here to get to the next step and perhaps to test this connection...

Confused here...
You are getting confused between the database server and the physical schema. Looks like that you cooked up with success a data server now need do is create a physical schema, which is where you will specify request (catalog), request (catalogue of work) on the definition tab and establish a context. All you have to do is right click on your server of planning data and add a new physical schema.

Paragraph styles changing all of the text, not only selected text

Hello, I'm using CS5, InDesign, on a Mac and I'm having a terrible time applying my paragraph styles in the imported Word document. The main problem is when I select text to apply my paragraph style to, the style is applied to all the text in the thread of the text in InDesign. The solution I understood is to go in Word, cut and paste each section on Word, a new Word document and be sure to 'Paste special' and select 'text style' in Word. Then, I am able to apply for the different sections of text paragraph styles when it is imported into InDesign. The only problem is that all hyperlinks are removed and I must now enter and put them all by hand. It is well over 100 hyperlinks in this ebook. I spent 4 hours trying to solve this problem. There seems not to be a conflict of style when I import the Word document and I am sure no paragraph or character styles are selected when I put them the text. I changed the options "next style" in paragraph stlyes and which seems not helped either. This would be a matter of Word?

That sounds to me like you have separte paragraphs, but have line breaks forced in the place where the paragraph breaks must be. You can check that by showing the nonprinting characters.

Two sites of finance not only loading login pages

Before the latest updates Firefox loaded two Web sites without problems. Now site Colonial First State does not display a login page and the readings I have to update my browser. The Commonwealth Bank site lets connect me but will not open any account information. The Commonwealth bank helpdesk told me to use Google Chrome. I did and it works very well with both sites.

Hello

Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

(If you use it, switch to the default theme).
- You can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
- Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.
Once you get the pop-up, simply select "" boot mode safe. "

If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

When find you what is causing your problems, please let us know. It might help others who have the same problem.

Thank you.

Loading ODI11g meta-data to the planning application
Hi all

Ive just started using ODI 11 g. While I was trying to load the metadata in the planning application, I got an error copied below. At first strange thing, when I created a new interface, the staging area are diff of target option was grayed. only after that I did the maps, I could come back and and activate this option. Was it a change in functionality or something wrong on my part.
I tried to use two motors SUNOPSIS and planning scheme, nothing has worked, the two were throwing the same error. IAM, load data from a csv file (the same who worked in the 10g version)

org.apache.bsf.BSFException: exception of Jython:
Traceback (most recent call changed):
File "< string >", line 23, < module >
at com.hyperion.odi.planning.ODIPlanningWriter.validateColumns (unknown Source)

at com.hyperion.odi.planning.ODIPlanningWriter.loadData (unknown Source)

at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

at java.lang.reflect.Method.invoke(Method.java:597)

com.hyperion.odi.planning.ODIPlanningException: com.hyperion.odi.planning.ODIPlanningException: the source result set contains the column [C1_ACCOUNT] that has no corresponding column on the side of planning.

at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:346)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2457)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:47)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)
at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2906)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2609)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:537)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:453)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1740)
to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ 2.doAction(StartSessRequestProcessor.java:338)
at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:214)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:272)
to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$ 0 (StartSessRequestProcessor.java:263)
to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ StartSessTask.doExecute (StartSessRequestProcessor.java:822)
at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:123)
to oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$ 2.run(DefaultAgentTaskExecutor.java:82)
at java.lang.Thread.run(Thread.java:662)

Please do help me.

Thank you
I agree with you, I tried on 11.1.1.5 and saw the same problem, I don't see this problem on 11.1.1.3 however.

See you soon

John
http://John-Goodwin.blogspot.com/

Select the Member not level 0 in the form of Hyperion Planning

Hello
I have the next dimension:
Total product (Lev 3)-> product-> product-> product (Lev 0) (Lev 1) (Lev 2)
In the form of selecting members, I need to dynamically select ALL AND ONLY members of level 1 (range). How can I do this?
I can't use a filter on an attribute, because the product range is not level 0 and the member functions (ancestors, children, Parents,...) do not seem to apply in my case.
I thank you,
Federico

I don't think that there is a simple approach. If your rating is sparse, then you can assign attributes to the level 1 members and use the form.

Concerning

Celvin Kattookaran

Problem with data type 'Date' in Hyperion Planning V11.1.2.2

Hello
I created members with the date data type. However when I save the date, it disappears or comes up with a random date? One has encountered such a problem before?
If so can you share the fix.
Thanks in advance for your help.
See you soon,.
XXX

Hello

This problem is related to you not having is not a coherent framework for your type of date entry.

So, go to the administration of the application and define the date format DD/MM/YYYY in the application settings and display options, under current default application settings. Then after doing that as a user, go to user preferences and display options and the date format, select the same. Or delete automatically detect them.

I've seen this behavior if you detect automatically on the user's preferences

Thank you

Anthony

backup & restore for data in Hyperion Planning form
Hi all

I want to know the procedure backup & data restore form in 4.0.1... Please planning of Hyperion to provide any documents about this topics...

Thanks in advance,

Kind regards
Katia...
The location of the utility all depends on the version as it was preparing round several times on your version of the utility should be in \Hyperion\HyperionPlanning\Utils

The format of the command line will be

formdefutil

for example
FormDefUtil.cmd export Form1 localhost password admin APPNAME

FormDefUtil.cmd export - all localhost admin password APPNAME

See you soon

John
http://John-Goodwin.blogspot.com/

Extract data from Hyperion Planning
Hello Experts,

I have a question that is asked repeatedly. Question is, how to extract data from planning with ODI?

I saw most of the answers saying we need to extract the data of Essbase (as Essbase stores planning data). But what happens if I want to retrieve data that is stored in the relational repository with its data into Essbase? As list of smart, the textual data in the case of system 9?

Thank you
SIDD
It is possible to extract the essbase data and then link to the planning of the relational tables to transform the digital value of essbase in text planning.

See you soon

John
http://John-Goodwin.blogspot.com/

Unable to open the data on hyperion planning form
When I open the data form this message appears:
"Your data request refers to a member who does not know planning or Essbase. Make sure that all members are defined in the planning and Essbase'
First do you have confirmed all the elements you reference on your form exist in Essbase using EAS - if perform a refresh of the planning database solves this problem is the problem.

Then, confirm that if you use substitution variables, as they are indeed correct values.

Kind regards

John A. Booth
http://www.metavero.com

I want popup in the Data Form (Hyperion Planning) so all chainges
Hi all

is possible to set a popup in data form.if know tell me.

EX:
If the data changes in months now I want data popup are changed...

Thanking you.
Mohan.j

Published by: failure to restructure Essbase by adding the attribute on 5 April 2012 02:55

Published by: I want popup in the form of data, if necessary chainges on April 15, 2012 23:48
Essbase transformed into shared Service security mode?

See you soon

John
http://johngoodwin.blogspot.com/

Loading text in the planning data.
Dear Experts,

Loading text data using tables HSP the only way to load text data in planning?

It would be great if someone could explain to me the process to do OR give me links to some docs/blogs related to this topic.

Thank you
~ RN.
You should not need to load the tables, you can use the outlineload utility, or ODI, if it is active-EPMA application then the data synchronization.
For the outlineload have a read of http://docs.oracle.com/cd/E17236_01/epm.1112/hp_admin_11122/ch05s02s01.html or to have a reading of http://john-goodwin.blogspot.co.uk/2011/12/planning-loading-text-member-data.html or http://john-goodwin.blogspot.co.uk/2012/01/loading-to-epma-planning-applications_22.html

See you soon

John
http://John-Goodwin.blogspot.com/

OutlineLoad utility not only loading text or dates in Hyperion Planning

Similar Questions

Maybe you are looking for