Outlook Express 6: could not resolve the name of the beneficiary - abandoned user command
original title: could not resolve the name of the beneficiary - abandoned user command
When trying to send outside of Outlook Express 6 (right click, send to or by clicking on a hyperlink email), the above message appears.
AVG is known to cause problems with OE. One thing that must be done is to ensure that is NOT set to scan the mail. I know that the only way in the past to avoid this problem is to uninstall AVG and then reinstall it with the email Scanner option is disabled. I don't understand what else could be blocking, unless it is another program running in the background. I have recently spent 6 hours trying to resolve a problem where a program installed on a computer just wouldn't work, and I tested it on another computer and it worked fine. I turned off and installed in safemode, and he still wouldn't run on this computer. I told my friend that computer, it is that the only thing left that I could think of to try to uninstall the anti-virus software (which will move without a name) and see if it would make a difference (I had already turned off all its services) and of course the program executed instantly as soon as the machine was gone. So I put MSE (www.microsoft.com/security_essentials/) about it, and gave it to my friend. The moral of this story is that the running software can interact with windows to break and sometimes the only way to identify the culprit is to get rid of all works we can imagine.
That said, I can't really fault necessarily on dysfunction something else installed on your computer, but if you went through all the hoops and it still doesn't, which suggests a background process running blocking things. It is in any case my point of view on this.
Another thing. Under this key:
HKEY_CLASSES_ROOT\mailto
the hull | Open | order value must indicate:
/Mailurl:%1 "%ProgramFiles%\Outlook Express\msimn.exe".
but it is probably already.
Steve
Tags: Windows
Similar Questions
-
Q10 Q10 blackBerry WIFI - browser error - could not resolve the host name
Hello
I use my Q10 while overseas for the Wifi only. My SIM card is in my 9900 (thank you BB not to tell anyone that BIS no longer works and WW BB roaming is not until after people buy OS 10 devices, anyway...) but I want to use the Q10 for Skype, browsing and Email while on WIFI.
Skype works.
Browser gives "Could not resolve the host name" and charge no emails.
WiFi network is good (the 9900 is connected and works, as do other devices). I reset the phone, router, etc. etc.
All to nothing does not.
A telephone conversation of two hours with T-Mobile (from abroad) was unnecessary and disconnected.
All DNS data seems to be there.
Please help.
Thank you
Aviv
Hello
Problem solved.
I have reset the router before, nothing helps. The only way I got it work is as follows:
(1) turn off the router and wait for the phone to 'do not see' to the network in question.
(2) turn off Wifi on the phone (menu setting and tap on wifi)
(3) restart router
(4) restart the phone
After about 10 minutes, it is finally connected.
Thank you all,
I would BB would have simply kept the features of the 9900 and just made more attractive to the masses, instead of making an iphone with a keyboard...
-
Hello
So I started with a Horizon view, so I apologize if this is a noob question. I wanted to try to put a security server in our DMZ, but before I put it in the DMZ I wanted to test whether customers would be on our network. So here's my setup:
Overview of VMware View Administrator 5.3.2 generation-188719
Same version for security server.
Windows Firewall is activated 'On' on all profiles on security and the server connection. (this might be important later)
Laptop with Horizon installed Client, Version 3.2.0 build-2331566
IPad Air2 with Horizon Client Version 3.2.0 build-2331566
On the Administrator display > display Configuration > Security servers > change on the Security Server
I PCoIP Secure Gateway set to the IP address of the Security Server (say its 192.168.1.10:4172)
Connection servers > edit on the login server
I also have the Security server defined as PCoIP Secure Gateway (192.168.1.10:4172)
Yet once I wanted to test it before I put it in the DMZ
So when I connect with the iPad, it works fine, I can connect, see all my connections and connect to just fine.
On the laptop, when I try to connect, I get the login screen where I put my user name and password (correctly, I might add ) and when I try and I get a connection error.
"Error: could not resolve the address of the server: the requested name is valid, but no data of the requested type was found."
I found the article KB VMware goes around the question: KB 2085365 (without help)
I changed the Secure Gateway on both safety and the connection to the server at each IP I can think of, but it still does not work.
Can someone give me an idea what can be wrong?
What is my firewall to connect to the server? (I don't remember if I had turned on firewalls when I installed the login server while they could not properly configured summer when I install?)
Any help would be amazing!
Thanks for reading!
I found the problem, it turns out that the network port to the Security server has been set for public and not private in the firewall. Thanks for the help!
-
Workstation 8: Upload failed: Curl error: could not resolve the host name
I have workstation 8 connected to our ESX host, it shows all the machines and allows me to connect to their end. But when I try to copy/paste/drag and drop a local virtual machine over there he said "Vmware workstation 8: Upload failed: Curl error: could not resolve the host name.
Someone at - he fell on this or have any ideas why this would be. I think that if it does not find the host name, I could not navigate or connect to my Virtual Center.
Hello
Whats is your ESX host name? I would recommend using with full ESX host name during the connection. You can connect to the ESX host using the host name, but to download the VM in this topic, you will need to use FULL of ESX host of domain name when connecting.
Please try to do it and let us know if it solves your problem.
Thank you
Deep
-
ORA-12154: TNS: could not resolve the connect identifier specifier (XE)
Hello
«I installed on my laptop with win 7 Oracle Database 10g Release 2 (10.2.0.1) Express Edition for Microsoft Windows, but when I tried to connect with Toad for Oracle Freeware 10.6 I get the following error ' ORA-12154: TNS: could not resolve the connect identifier specifier (XE)» I read on the forum that the problem comes from the wrong configuration of the AMT.
This is rhe tnsping respons
"C:\Users\Sergiu > tnsping XE.
AMT Ping Utility for 32-bit Windows: Version 10.2.0.1.0 - Production on 13-NOV-2
010 15:20:10
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Use settings files:
C:\oraclexe\app\oracle\product\10.2.0\server\network\admin\sqlnet.ora
TNSNAMES adapter used to resolve the alias
Try to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP) (HOST = Sergiu-PC) (p)
(ORT = 1521)) (CONNECT_DATA = (SERVER = dedicated) (SERVICE_NAME = XE)))
OK (0 msec)
"
EARPHONE
"
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oraclexe\app\oracle\product\10.2.0\server)
(= Extproc PROGRAM)
)
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = C:\oraclexe\app\oracle\product\10.2.0\server)
(= Extproc PROGRAM)
)
)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC_FOR_XE))
(ADDRESS = (PROTOCOL = TCP) (HOST = Sergiu-PC)(PORT = 1521))
)
)
DEFAULT_SERVICE_LISTENER = (XE)
"
SQLNET
"
# This file is actually generated by netca. But if customers can opt for
# install 'Software Only', this file does not exist and without the native
authentication #, they will not be able to connect to the database on NT.
SQLNET. AUTHENTICATION_SERVICES = (NTS)
"
TNSNAME
"
XE =
(DESCRIPTION =
(ADDRESS =
(PROTOCOL = TCP)
(HOST = Sergiu-PC)
(PORT = 1521)
)
(CONNECT_DATA =
(SERVER = dedicated)
(SERVICE_NAME = XE)
)
)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS =
(PROTOCOL = IPC)
(KEY = EXTPROC_FOR_XE)
)
(CONNECT_DATA =
(PRESENTATION = RO)
(SID = PLSExtProc)
)
)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS =
(PROTOCOL = IPC)
(KEY = EXTPROC_FOR_XE)
)
(CONNECT_DATA =
(PRESENTATION = RO)
(SID = CLRExtProc)
)
)
"
Can someone tell me what is the problem?
Best regardsIt can be caused by the location of the TOAD software. The have you installed under "Program Files (x 86)? If Yes, then try to reinstall in a different directory, media in the path name can cause problems.
-
Greetings
There are a lot of topics about this problem on the internet, but none of them deal with this issue properly, so I couldn't find a solution to the problem.
I installed: Oracle Database 10 g Express Edition
After that the installation was done, I opened the SQL command line
and I used the command "connect" to connect
I enter username
Then I entered the password
After a few seconds, I got the following error message:
ORA-12154: TNS: could not resolve the connect identifier specified
Screenshot of the error:
http://I35.Tinypic.com/14o26g7.PNG
I installed this version of Oracle on Windows XP 32 bit and Windows 7 32 bit and I get the same error message when it tries to connect.
Why Oracle does not immediately after installation?
Are there other measures that need to be accomplished in order to make this work? If so I'd appreciate any help step by step, I was stuck trying to find a solution for days.
Published by: user10192105 on August 22, 2010 19:34>
I was able to connect using the above command, but I would like to know why can't connect using a user name and password? I still cannot connect using a user name and password even after the environment variable.
>The problem is that the normal user accounts are either locked, you use is maybe not the right password or they may not have the necessary privileges to establish a session (there are a number of reasons).
Since you are in the console database, you don't need the environment variable set. SQL * Plus Gets the location of your database in the registry.
Make the alter statement that I posted earlier for a user which you know that there is and we'll take it from there.
John.
-
ORA-12154: TNS: could not resolve the connect through TOAD VAT registration
Hello
I want to configure the TOAD to connect to servers on my place of work.
I installed on my laptop desktop
Toad for Oracle 9.7
Oracle client 10g Express edition
I am able to connect to the server to other servers in the office at the level of the unix.
But I get this error message.
Oracle (from the server to access) version: 11 GR 1 material
See you soon,.
MalikaHello
It is not related to Toad, check the TNS entry in your TNSNAMES.ora & make sure what is it pointing to the appropriate service name.Error: ORA-12154 / TNS-12154
Text: TNS: could not resolve service name
-------------------------------------------------------------------------------
Cause: The specified service name is not defined correctly in the
TNSNAMES. ORA file.
Action: Perform the following checks and fix the error:
-Check that a TNSNAMES file. ORA file exists and is in good
Place and accessible. Refer to the specific manual of operating system
For more information on the location and the name required.
-Check that the name of the service exist in one of the
TNSNAMES. ORA file and add if necessary.
-Make sure that there are no errors of syntax anywhere in the file.
Search for unmatched parentheses or stray characters.
Any error in a TNSNAMES file. ORA file makes it unusable. See
Chapter 4 in the SQL * Net V2 Administrator's Guide. If
possible, regenerate the configuration using the Oracle files
Network Manager. -
ORA-12154 tns could not resolve the specified correct identifier
I am facing the following problem:
labVIEW 2012 32 bits 64 bits of Windows 7, 10.2.0.1.0 oracle client (32-bit).
I created a DSN from Data Sources (ODBC) (32-bit version of what in % windir%\syswow64\odbcad32.exe) pointing to an instance of Oracle 10 g.
I have test the DSN in this way (IE. Data sources (ODBC) and the connection is successful (which means that the tnsnames.ora is correct).
I use the "DB tools Open Connection.vi" in order to get connected to this database, passing as parameters the DSN above, the user name and password.
I get the error:
ADO error: 0x80040E4D
Exception occurred in the Microsoft OLE DB provider for ODBC drivers:[Oracle] [ODBC] [Ora] ORA-12154: TNS could not resolve the specified correct identifier
all will help much appreciated
Thanks in advance
Hello everyone.
I already solved the problem (work until late Saturday).
the solution was to install the latest version of the Oracle customer, namely: Oracle 11 g Release 2 CLIENT for Windows 32 (11.2.0.1.0).
Now everything works OK.
I also tested in Windows 7 32 bit (the .vi even and the same Oracle client). This will also OK.
Thans a lot.
-
sqlplus ORA-12154: TNS: could not resolve the connect identifier specified
Hello
I am not able to connect to the database using sqlplus, using following command:
sqlplus activites@OCA010
I get the error message "ORA-12154: TNS: could not resolve the connect identifier specified.
I tried to connect by providing the full as connection string: "" sqlplus activities / [email protected]:1521 / compix "and he succeeded."
I also tried to connect using sql developer by providing network TNS alias 'OCA010' it is also successful.
Someone could please help out here and let me know how can I connect using sqlplus using aliases TNS network.
content of the tnsnames.ora file is as follows
tnsnames.ora # Network Configuration file: D:\Oracle\product\11.2.0\dbhome_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
COMPIX =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP) (HOST = LUCKY-HP)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = compix)
)
)
BC =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP) (HOST = LUCKY-HP)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = BC)
)
)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))
)
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
)
)
OCA01 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP) (HOST = LUCKY-HP)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = OCA01)
)
)
OCA010 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.10.3)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = compix)
)
)
Thanks in advance.
2931143 wrote:
Hi EdStevens,
I used option TNS with Alias network as 'OCA010' in Sql Developer.
I checked in tnsping and tnsnames.ora directory is correct.
Please find below the exit of tnsping:
C:\Users\LUCKY>tnsping OCA010
AMT Ping Utility for 64-bit Windows: Version 11.2.0.1.0 - Production on October 29, 2015 21:07:38
Copyright (c) 1997, 2010, Oracle. All rights reserved.
Use settings files:
D:\Oracle\product\11.2.0\dbhome_1\NETWORK\ADMIN\sqlnet.ora
AMT-03505: failed to resolve the name
Have you worked from the link I provided? (I don't think you have time to do).
It is possible that your tnsnames.ora is corrupted by some weird characters printable somewhere. In some versions of the oracle, he might be sensitive to spaces vs. tabs. If in doubt, netca to add entries, rather than doing it by hand.
-
DB Link error: ORA-12154: TNS: could not resolve the connect identifier specified
Hi all
We need to make an entry in the tnsname.ora file in a local database to connect to the remote database using db link?
Here is my code: -.
create the database link * _DBLINK
connect to the USER IDENTIFIED BY 'user '.
using '(DESCRIPTION =)
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP) (HOST = *. *. *. *)(PORT = 1521))
)
(CONNECT_DATA = (SERVICE_NAME = REM)
)';
After the creation of the DB connection when I'm trying to run select 1 of dual@***_DBLINK
He throws me an error ORA-12154: TNS: could not resolve the connect identifier specified
Am I expected to do an entry in the file tnsname.ora for "REM". I don't remember making any changes in the file tnsname.ora for the creation and access of the remote database via dblink.
Help, please.
Thanks in advance.
2925917 wrote:
Hi all
We need to make an entry in the tnsname.ora file in a local database to connect to the remote database using db link?
Here is my code: -.
create the database link * _DBLINK
connect to the USER IDENTIFIED BY 'user '.
using '(DESCRIPTION =)
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP) (HOST = *. *. *. *)(PORT = 1521))
)
(CONNECT_DATA = (SERVICE_NAME = REM)
)';
After the creation of the DB connection when I'm trying to run select 1 of dual@***_DBLINK
He throws me an error ORA-12154: TNS: could not resolve the connect identifier specified
Am I expected to do an entry in the file tnsname.ora for "REM". I don't remember making any changes in the file tnsname.ora for the creation and access of the remote database via dblink.
Help, please.
Thanks in advance.
I've learned to trust in your obfuscation you covered something important, or you are showing some apples and oranges. Error to declare you come from not being able to find referenced in tnsnames.ora entry, but the way you say you created your link db, you hardcoded the entire connection, so he never users tnsnames.ora.
I would change the definition of db_link
create the database link * _DBLINK
connect to the USER IDENTIFIED BY 'user '.
using "REM."
Then create an entry in your tnsnames.ora
REM =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP) (HOST = *. *. *. *)(PORT = 1521))
)
(CONNECT_DATA = (SERVICE_NAME = REM)
)
)
Also, use server name instead of the HOST = IP address
The closer looks that you can miss brackets final closing on your original definition.
-
Hi friends,
We do face-down question when executing the execution Plan in DAC for full charge. We are working on the project of modernization of the OBI Applications and my client has worked on this environment is a few days. Before this, they load to the source 'EBSTST' instance and now changed data for instance 'EBSWKLY '. We have changed the details of connection under the tab 'Physical Data Sources' DAC. Test the connection Source and target are good. We have added input TNS of EBSWKLY in the path: u01/app/oracle/oracle11g/product/11.2.0/client_1/network/admin.
ORA-12154: TNS: could not resolve the connect identifier specified
Database driver error...
Function name: connect
[The database error: could not connect to the database using the [apps] user and the connection string [EBSWKLY].].
Please suggest me if I m done mistake anywhere...
Thanks in advance.
Raghu Jen7782
I was saying about the environment variables defined by you on the server of informatica/dac under the .profile or .bash_profile as below:
TNS_ADMIN = $ORACLE_HOME/network/admin; Export TNS_ADMIN
ORACLE_BASE = / home/oracle/app/oracle; export ORACLE_BASE
ORACLE_HOME=$ORACLE_BASE/product/11.2.0/; Export ORACLE_HOME
ORACLE_SID = InstanceName; export ORACLE_SID
Path = $PATH: / usr/sbin: $ORACLE_HOME/bin. export PATH
LD_LIBRARY_PATH=.:$ORACLE_HOME/lib:/lib:/usr/lib; export LD_LIBRARY_PATH
CLASSPATH = $ORACLE_HOME/jlib: $ORACLE_HOME/rdbms/jlib. Export CLASSPATH
Here are some examples I mentioned everything. You can set them in the user profile from which you installed the server informatica/dac.
If it is a CAR Forum, try to set the value of the instance-specific SID for example: orcl11 or orcl12 or orcl13... try to connect to each instance. Sometimes the general SID does not recognize configuration
-
ORA-16783: could not resolve the deficit for the database
I have two databases emadb and emadbdg, governed by Data Guard. emadb is currently principal. emadbdg is currently pending physical.
ORA16783 - cannot solve the gap for the database is one I think, is the origin of the problem. Anyone can help solve the problem below. Logs attached.
Output of data protection
DGMGRL > show detailed configuration
Configuration - DRSolution
Protection mode: MaxAvailability
Databases:
emadb - primary database
Error: ORA-16825: multiple errors or warnings, including failover quick start or warnings, errors detected for the database
emadbdg - (*) Physical standby database
WARNING: ORA-16817: configuration not synchronized rapid failover
(*) Fast failover target
Properties:
FastStartFailoverThreshold = "30"
OperationTimeout = "30"
FastStartFailoverLagLimit = "30"
CommunicationTimeout = "180"
FastStartFailoverAutoReinstate = 'TRUE '.
FastStartFailoverPmyShutdown = "FALSE".
BystandersFollowRoleChange = "ALL".
Fast-Start Failover: ENABLED
Threshold: 30 seconds
Target: emadbdg
Observer: emarn1
Offset limit: 30 seconds (do not use)
Primary closure: FALSE
Auto-Rétablir: TRUE
The configuration status:
ERROR
DGMGRL > see the detailed database emadb
Database - emadb
Role: PRIMARY
State of destination: TRANSPORT-WE
Occurrence (s):
emadb
Database error (s):
ORA-16783: could not resolve the deficit for the database emadbdg
Warning (s) of database:
ORA-16817: unsynchronized fast-start failover configuration
Properties:
DGConnectIdentifier = "emadb.
ObserverConnectIdentifier = "
LogXptMode = "SYNCHRONIZE".
DelayMins = '0'
Binding = "optional."
MaxFailure = '0'
MaxConnections = '1'
ReopenSecs = "300"
NetTimeout = "30"
RedoCompression = "DISABLE."
LogShipping = 'ON '.
PreferredApplyInstance = "
ApplyInstanceTimeout = '0'
ApplyParallel = 'AUTO '.
StandbyFileManagement = 'AUTO '.
ArchiveLagTarget = '0'
LogArchiveMaxProcesses = "4"
LogArchiveMinSucceedDest = '1'
DbFileNameConvert = 'emadbdg, emadb '.
LogFileNameConvert = "/ opt/app/oracle/oradata/emadbdg, / opt/app/oracle/oradata/emadb '"
FastStartFailoverTarget = "emadbdg".
InconsistentProperties = "(monitor).
InconsistentLogXptProps = "(monitor).
SendQEntries = "(monitor).
LogXptStatus = "(monitor).
RecvQEntries = "(monitor).
Nom_sid = "emadb.
StaticConnectIdentifier = ' (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=emarn1) (PORT = 1521)) (CONNECT_DATA = (SERVICE_NAME = emadb_DGMGRL) (INSTANCE_NAME = emadb)(SERVER=DEDICATED)))'
StandbyArchiveLocation = "/ opt/app/oracle/oradata/emadb/archivelog1.
AlternateLocation = "
LogArchiveTrace = '0'
LogArchiveFormat = '% t_%s_%r.dbf '.
TopWaitEvents = "(monitor).
State of the database:
ERROR
DGMGRL > see the detailed database emadbdg
Database - emadbdg
Role: STANDBY PHYSICS
State of destination: apply
Transport delay: (unknown)
Apply the Lag: (unknown)
Real-time query: OFF
Occurrence (s):
emadbdg
Warning (s) of database:
ORA-16817: unsynchronized fast-start failover configuration
Properties:
DGConnectIdentifier = "emadbdg".
ObserverConnectIdentifier = "
LogXptMode = "SYNCHRONIZE".
DelayMins = '0'
Binding = "OPTIONAL."
MaxFailure = '0'
MaxConnections = '1'
ReopenSecs = "300"
NetTimeout = "30"
RedoCompression = "DISABLE."
LogShipping = 'ON '.
PreferredApplyInstance = "
ApplyInstanceTimeout = '0'
ApplyParallel = 'AUTO '.
StandbyFileManagement = 'AUTO '.
ArchiveLagTarget = '0'
LogArchiveMaxProcesses = "4"
LogArchiveMinSucceedDest = '1'
DbFileNameConvert = 'emadb, emadbdg '.
LogFileNameConvert = "/ opt/app/oracle/oradata/emadb, / opt/app/oracle/oradata/emadbdg '"
FastStartFailoverTarget = "emadb.
InconsistentProperties = "(monitor).
InconsistentLogXptProps = "(monitor).
SendQEntries = "(monitor).
LogXptStatus = "(monitor).
RecvQEntries = "(monitor).
Nom_sid = "emadbdg".
StaticConnectIdentifier = ' (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=emarn2) (PORT = 1521)) (CONNECT_DATA = (SERVICE_NAME = emadbdg_DGMGRL) (INSTANCE_NAME = emadbdg)(SERVER=DEDICATED)))'
StandbyArchiveLocation = "/ opt/app/oracle/oradata/emadbdg/archivelog1.
AlternateLocation = "
LogArchiveTrace = '0'
LogArchiveFormat = '% t_%s_%r.dbf '.
TopWaitEvents = "(monitor).
State of the database:
WARNING
DGMGRL >
DGMGRL >
DGMGRL >
DGMGRL >
DGMGRL > outputAlex Antony Samantha wrote:
Head nodeSQL> archive log list Database log mode Archive Mode Automatic archival Enabled Archive destination /opt/app/oracle/oradata/emadb/archivelog1 Oldest online log sequence 65 Next log sequence to archive 67 Current log sequence 67 SQL> select thread#,max(sequence#) from v$archived_log group by thread#; THREAD# MAX(SEQUENCE#) ---------- -------------- 1 925
It is misleading to the column sequence, sequence of real number is 65 series, but it's beyond. Have you restored any old backup with the incarnation?
When you perform incremental backups, is the current_scn in the two primaries and Eve was balanced?And the sequence number * 29 * is transferred from the primary to the standby (or) he has been removed from the primary?
Perform the two methods.(1) SQL > alter system set log_archive_dest_state_2 = 'reporter ';
(2) conduct 3-4 log switches
(3) SQL > alter system set log_archive_dest_state_2 = 'enable '.and displays the alert log database and backup files.
And you mentioned the hostname in the entries of the listener, if this entry is added in/etc/hosts? otherwise you can use the IP address instead of the host name and then reload the listener.second method
(1) copy archives missing from primary sequence of 29
(2) place manually and then perform a recovery
or
(3) retrieve manuallyAnd update with your conclusions after all these lists.
Thank you. -
ORA-12154: TNS: could not resolve the connect identifier specified in 11g R2
Hello
Recently we changed the name of our Linux server, after chanding hostname, I made changes in tnsnames.ora and listener.ora and also local_listener at the database level.
When I am trying to connect database of his failure with the error.
[orawiz@wizapp admin] $ sqlplus system/oracle@WIZ
SQL * more: Production of release 11.2.0.1.0 LUN 20 16:57:58 Feb 2012
Copyright (c) 1982, 2009, Oracle. All rights reserved.
ERROR:
ORA-12154: TNS: could not resolve the connect identifier specified
Here's my entires of tns.
[orawiz@wizapp admin] $ cat tnsnames.ora
tnsnames.ora # Network Configuration file: /wiz_app/wiz/oracle/product/11.2.0/db_1/network/admin/tnsnames.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP) (HOST = 10.172.20.236)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = wiz)
)
)
#wiz = (DESCRIPTION =
# (ADDRESS_LIST =
# (ADDRESS = (PROTOCOL = TCP) (HOST = 10.172.20.236)(PORT = 1521))
# (CONNECT_DATA =
# (SERVER = DEDICATED)
# (SERVICE_NAME = wiz)
# )
# )
[orawiz@wizapp admin] $ cat listener.ora
listener.ora # Network Configuration file: /wiz_app/wiz/oracle/product/11.2.0/db_1/network/admin/listener.ora
# Generated by Oracle configuration tools.
WIZ =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP) (HOST = 10.172.20.236)(PORT = 1521))
)
)
#SID_LIST_LISTENER =
# (SID_LIST =
# (SID_DESC =
# (SID_NAME = wiz)
# (GLOBAL_DBNAME = wiz)
# (ORACLE_HOME = wiz_app/wiz/oracle/product/11.2.0/db_1)
# )
# )
ADR_BASE_LISTENER = / wiz_app/wiz/oracle
[orawiz@wizapp admin] $ cat sqlnet.ora
sqlnet.ora # Network Configuration file: /wiz_app/wiz/oracle/product/11.2.0/db_1/network/admin/sqlnet.ora
# Generated by Oracle configuration tools.
NAMES. DIRECTORY_PATH = (TNSNAMES, EZCONNECT)
ADR_BASE = / wiz_app/wiz/oracle
tnsping also default.
[orawiz@wizapp admin] tnsping wiz $
AMT Ping utility for Linux: Version 11.2.0.1.0 - Production on 20 February 2012 17:03:16
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Use settings files:
/wiz_app/Wiz/Oracle/product/11.2.0/Db_1/network/admin/SQLNET.ora
AMT-03505: failed to resolve the name
[orawiz@wizapp admin] $Nothing to with listener.ora file with ORA-12154.
If the listener does not not or the status is not ready then it's listener.ora.Below add entries in your file tnsnames.ora and post $tnsping wiz
WIZ = (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 10.172.20.236)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = wiz.
) ) ) Publish your file sqlnet.ora
Published by: CKPT on 20 February 2012 17:28
-
AMT: could not resolve the connect identifier specified
Hi guys, I have installed Oracle on Windows XP SP2 11.2.0.1.0 C:\oracle folder
I use the ORCL service to connect to the database using SQL more. I am connected yesterday and it was very good. Now I get this error:
ORA-12154: TNS: could not resolve the connect identifier specified
Of course, this error is related to the file tnsnames.ora and identifiers of Service and not correct SID.
Here are my tnsnames.ora
Here's the listener.ora# tnsnames.ora Network Configuration File: C:\oracle\product\11.2.0\dbhome_1\network\admin\tnsnames.ora # Generated by Oracle configuration tools. LISTENER_ORCL = (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521)) ORACLR_CONNECTION_DATA = (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521)) ) (CONNECT_DATA = (SID = CLRExtProc) (PRESENTATION = RO) ) ) ORCL = (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = orcl) ) )
Here's the sqlnet.oraSID_LIST_LISTENER = (SID_LIST = (SID_DESC = (SID_NAME = CLRExtProc) (ORACLE_HOME = C:\oracle\product\11.2.0\dbhome_1) (PROGRAM = extproc) (ENVS = "EXTPROC_DLLS=ONLY:C:\oracle\product\11.2.0\dbhome_1\bin\oraclr11.dll") ) (SID_DESC = (SID_NAME = ORCL) (ORACLE_HOME = C:\oracle\product\11.2.0\dbhome_1) ) ) LISTENER = (DESCRIPTION_LIST = (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521)) (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521)) ) ) ADR_BASE_LISTENER = C:\oracle
All the world is facing something like this before?SQLNET.AUTHENTICATION_SERVICES= (NTS) NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
RAF Royal wrote:
Ok
But now, I noticed something strange.If I try to connect with you the user's SYSTEM:
C:\>sqlplus system/password@ORCL
SQL * more: Production version 11.2.0.1.0 sea Giu 8 12:26:08 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
ERROR:
ORA-12154: TNS: could not resolve the connect identifier specifiedIf I login with user SCOTT:
C:\>sqlplus scott/tiger1@ORCL
SQL * more: Production version 11.2.0.1.0 sea Giu 8 12:26:26 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connect to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With partitioning, OLAP, Data Mining and Real Application Testing optionsSQL >
Also, with the sys user, I get error
What is going on?
The 'system' password includes a ' @' character?
-
ORA-12154 TNS: could not resolve service name
Hi all
I cloned an Oracle Apps 11.5.10.2 instance on a new server and coompleted it successfully. I could connect to the applications and submit queries with success. But when I try to connect to the database using SQLPLUS or TOAD, I get an "ORA-12154 TNS: could not resolve service name" error. I have the tnsentry for this database in tnsnames.ora on my PC. the entry is as below:
QA11I. WORLD =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP (Port = 1561))(Host = amcdev0004.xxx.com))
)
(CONNECT_DATA = (SID = qa11i) ORACLE_HOME = qa11i/app/qa11iora/9.2) (SERVER = DEDICATED))
)
TNSPING does not work. I have tried other servers as well but does not work. Please notify.
Thank you.Hello
A parenthesis is missing in the tnsnames.ora to your first post (just to the left of the ORACLE_HOME).
For your listener.ora on the next post I did not notice a missing parenthesis.
Best regards
Jean Valentine
Maybe you are looking for
-
Qosmio F20: cannot get broadband wireless
HelloI just purchased a Qosmio F20 age of 8 months, and bought a Netgear rangemax wireless router so that I can go wireless. The only problem is, I don't know how! I bought a wireless card for my old computer (the one that the qosmio replaced) and it
-
Satellite L300 - how to install Ethernet controller?
Hi all The other day I was cleaning up my computer (just uninstall unused and games programs and other things) and I accidentally uninstalled my ethernet controller. I restarted my computer and it came with a box saying install ethernet controller. S
-
someone at - it the y510p bios v2.07?
Does anyone have the BIOS 2.07 or earlier version to the y510p of lenovo? Since I've updated my bios, my video card does not do error 43 in any version of Windows. Version 2.07 is there lenovo y510p of the bios that I could download? Please? Thank yo
-
HP 6700 and Mac - is a deadly combination?
my hp 6700 don't scan, print or copy - I have a Mac - please help
-
ProBook 6570b: drive space
Hi I tells me that I'm running out of space on the 'C' drive, I uninstalled a few obvious programs I've ever used but it hardly makes a difference when I lokk on the rest of my programs I do not know where it is safe to remove I don't want to uninsta