someone at - it the y510p bios v2.07?

Similar Questions

• Can someone tell me the exact procedure updated the BIOS on an Aspire V5 - 122P.

  Can someone tell me the exact procedure updated the BIOS on an Aspire V5 - 122P. I upgraded from Windows 8.1 for Windows 10. I read somewhere that the upgrade of BIOS ver 2.10 and 2.12 will improve the speed at which it runs. It seems that here are slow running problems with this machine.

  I also know enough to know that an executed incorrecly BIOS update can cause a wipe on then, please, if you have done this correctly, please share your experience.

  I downloaded the file and the readme says: Windows flash: Please click on "SOBI0210.exe" for updating the bios.

  I didn't get this in case it defines something moving that I don't understand.

  [subject line changed to reflect the new topic]

  Hello

  There is nothing special for the update of the BIOS.

  Just download the BIOS, make sure that your laptop is plugged in (and also that he above 60% battery in any case), and run the file that you downloaded.

  BIOS

  Acer

  BIOS

  2.12

  3.2 MB

  24/07/2014

  Download

• Prodesk 400 G2 microtour: Prodesk 400 G2 microtour - after updating to the latest bios has received 512 - rear fan error

  Hello

  The same situation on three computers WITHOUT fan back.

  After bios update latest version (02.46 Rev.A) I am reciving on each 512-rear chassis error not detected start fan.

  So the problem is definitely with the bios, that someone has the same problem?

  OK, it seems that HP solutions. The problem was with the wrong bios file (version 2.46). First HP remove version 2.46 site Web and today I saw the new version of 2.47. In this case, HP automatically closed my ticket guarantee. Everything is ok with the new file.

• Spectrum of HP: Cannot install the latest Bios Update

  I get the following error message when it installs the update to the Bios: C2-error: area is write protected

  Someone knows how to fix this?

  Hello

  Thanks for posting in the HP Support forum. Welcome aboard!

  How about trying to update using the USB in the BIOS/UEFI > > http://support.hp.com/us-en/document/c00042629/ ?

  You can also check this > > http://h30434.www3.hp.com/t5/Notebook-Operating-System-and-Recovery/SOLVED-Can-not-update-Bios-Probook-640-G2/m-p/5683581#M446920

  ========

  Some notes - as mentioned in the article itself - updated only if you really must. Personally, I don't recommend do you it unless you're having problems with your existing BIOS and you are sure that the new BIOS will fix it.

  General recommendation I provided to users/customers is NOT to upgrade the BIOS/UEFI, unless they live any sort of BIOS/UEFI problem specific. Just for updaing and update just for the use of the latest verson is not the solution. Any type of update (no matter what and that relesed it) can solve 2 problems but could introduce more than 10 questions. In addition, upgrading the BIOS (for any provider) are risky more because the BIOS recovery is not that easy compared to updates of typical software IF something goes wrong.

  It goes the same for Windows updates, OS update, drivers, etc - update/update updates IF you have any questions, you know are fixed in the new version or for some serious security problems. Otherwise, keep the existing version as long as possible.

  I hope this helps! Let me know if you have any questions or if you have difficulties

• Tecra S1 - what is the latest bios?

  Hi, I wonder if someone can direct me to the latest version of the bios S1. The reason that I ask is that I have a bios loaded, which is 30/03/2005 ver 2.50 but when I try and get the latest version from the dated 07/09/07 Tosiba site it downloads just the same old bios? Is this the last or not?

  Thank you, Theo

  Hello

  The latest BIOS seem to be 2, 50-win.
  The BIOS seems to be transferred to 07/09/07
  I put t surprising, since 07/09/07, has not been updated. Tecra S1 belongs to one of the older series, and I doubt that this newer BIOS version would be published in the future

• How to install the new BIOS for Satellite Pro M50 under Ubuntu

  I am running Ubuntu on my M50 Pro. Could someone advise me what is the latest BIOS and how to install it?

  The update of the BIOS here site seems havean exe file but I couldn't see the BIOS file to the breast?

  Thank you

  Why do you want to update the BIOS?
  You have any big trouble with your laptop?

  The European driver Toshiba page provides BIOS BIOS for Vista and XP.
  Both versions of the BIOS must be completed while the operating system is running!

  If you use Linux on your laptop, you will not be able to update the BIOS!
  Do you understand?

  Once again; Updated the BIOS should be carried out ONLY if it of absolutely necessary. In other cases don't update!

• Satellite A55-S1065 - after removing the battery, BIOS ask me password

  So, something happened yesterday, and it seems to me that it is very strange.
  I have a portable Satellite A55-S1065. And while I was with power point, the
  computer crashes. In the midst of my confusion, I decided to delete
  the battery just to make him stop.

  So I did it and plugged it again
  and I tried to turn on the computer. Now, the bios ask me a password,
  but I've no idea what password it is that. Can someone help me solve this problem?
  IM really desperate to find a solution to this since this computer contain
  many of my works.

  Thank you very much.

  > After removing the battery, BIOS ask me password
  I know it may seem silly now, but I never heard of something like that. I use laptop for a long time and I had the experience with many others and strange question, but something like that, never.

  Problem is that we are dealing here in the public forum and BIOS password is a very sensitive area and very important security feature, so we can not write here about some illegal ways how you can remove the BIOS password.

  If there is no way to start your laptop, I recommend you contact the nearest Toshiba service provider and ask for help.
  I'm sorry. :(

• Satelite P300 does not start after the failed Bios Update

  Hello world

  I tried to update the bios of a P300 to this:
  18/03/10
  Update the BIOS
  Toshiba Windows 7-32 Bit 4.20 - WIN32 World Wide
  That I downloaded here: http://uk.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=UK after entering my laptops specs.

  The process flash hanged during the update and the laptop became screen starts, blank when turning on and nothing else...
  I tried to use the Phoenix of emergency crisis, created a diskette with the file Bios image that I downloaded but nothing succeeded.

  Access to the floppy drive USB floppy when you enter the recovery mode, I hear the beeps that indicate that a process is carried out, but when everything stops and restart... the problem remains.

  -Does anyone have a clue what to do next?
  -The warranty is void after a bios update attempt?

  Thank you for yor time.

  > - Someone at - it an idea what to do next?
  Well in this case, you will need to contact a local ASP (Toshiba authorized Service Provider).
  Guys could clean CMOS and flash the BIOS ROM module with a BIOS disk special crisis

  You will find here all the FSA all over the world:
  http://EU.computers.Toshiba-Europe.com-> support download &-> locate an authorized Service partner

• Y510p BIOS will not update

  I just tried to install the new BIOS for my y510p that came out July 2, but when I tried to run, I got "BIOS version compare error! I have no idea why this is happening. Any help would be appreciated, I know how much we all love a new BIOS . Thank you.

  error is due to Flash Back inside the bios is set on {disabled] enable first and then exit save changes once your OS again you can re-run the .exe file and it will work correctly without error}

  It will restart after producing runned .exe and then you will see a flashing screen where it will be at 3.05 version of your computer's bios portable flash

• Try to set / change the password BIOS admin via the script WMI on ThinkStation D20

  Hello Lenovo Community!

  Start using the WMI Lenovo_SetBiosSetting class on a D20 system.

  If I understand the documentation that there is a limitation on the BIOS password in the past, but I updated to the latest BIOS Rev who support States was added for this feature.

  I use a script that changes the supervisor on computers password successfully thinkpad, but when even to run the script from command line on the D20 system it returns "SUCCESS" however to change the password did not effect!

  I'm using the right parameters are the standard of lenovo

  ' pap, oldpass newpass, ascii, we.

  I thought maybe "pap" is not the correct setting for password Admin on the D20, however the WMI available, posted 2010 guide, does not show otherwise.

  Someone at - it an example script that they can display successfully change the password on a D20 system?

  Please and thx!

  Did you run the SaveSetting script after changing the password?

  You can get the SaveSetting script from the sample scripts D20 located at the following link:

  http://support.Lenovo.com/en_US/downloads/detail.page?docid=UM002033

  You can use the script SetAdminPassword from the library of scripts of series E, then a follow-up that with something like what follows before restarting:

  "cscript SaveSetting.vbs" originalpwd, ascii, we.

  Replace 'originalpwd' with all what your existing password was at the time wherever you booted the system.

• How to find the latest BIOS for my T60P?

  Dear Experts,

  I own a 2007FBG T60P I love to do it again works like a charm. I am interested in downloading the latest version of the BIOS but, unfortunately, 'my' type of model is not listed on the Lenovo Web site:

  http://www.Bilder-hochladen.NET/files/12b4-C4-3c77.jpg

  It would be much appreciated if someone showed me the way to the most recent and correct BIOS for my T60P.

  Thanks in advance

  pudu51

  It does not matter.

  The BIOS is shared between all units of T60/p non-large.

  The latest version is 2.27

• The fan runs all the time because xinetd running more than 80% all the time.  Someone else has the same problem?

  xinetd is running at 83% or more 24 x 7 devours battery in 2 hours or less and making the fan run all the time.  I am connected to a bug report, and it turns out that it was a duplicate because someone else had the same problem.  However, I have no access to the other bug report or find anything either in the discussion forums or online.  Anyone experience this problem?

  Hello gorgonzola1111,

  I doubt that someone else has this problem because xinetd does not part of macOS. Have you installed it from a package of "ports" 3rd party?

• How is it when I send photos to send to send to someone... the legends do not give.

  How is it when I send photos to send to send to someone... the legends do not give.

  Because captions are not part of the picture.

• THE CURRENT BIOS PASSWORD

  Hello

  I have a compaq mini 110

  having the problem with the current bios password

  Error CNU9243TDY

  HELP PLEASE

  Hello

  Try to enter: e9lo7vfati (3rd character is a lowercase L)

  Rehards,

  DP - K

• HP Jet 11 mdl # 11 - d010wm: I forgot the password (BIOS) to start to get into my HP flow 11 laptop.it Windows8

  I changed the passwords (Bios and login) on my laptop HP flow 11... (OS win8) IM in the service and delivered on the seas for 9mnths... my back that my passwords disappeared completely from what I remembered them at be.when I turn on my laptop it immediately wants admin.password and after 3 failed attempts, she said system is off. Please help me solve this problem... relevance is the key... I am very grateful for having taken the time to help me...

  @PORKCHIZZLE

  Enter: 69671381

  Kind regards

  DP - K