Output 2 sound at the same time cards

Similar Questions

• How to play 2 or more sounds at the same time?

  I build an app using QML instrument & everything goes well except this little thing. I have created several "ImageButton" & gave them individual sounds by the command "onClicked. but I found these sounds play in a queue (click twice after the first audio button is filled & third time after 2nd and so on...) instead of playing at the same time. Y at - it a command which activates the buttons launch at the same time?

  Thank you

  You can add myPlayer more

  ....

  MediaPlayer {}

  ID: myPlayer2

  }

  Now you can player your sound with myPlayer2 at the same time with myPlayer.

  You can create as myPlayer you want, then play them at the same time with different sound.

  Hope this helps

• Headphones and speakers play a sound at the same time!

  Hello.

  I had a problem in recent weeks where the sound that plays on my computer, either a film or music or a game, it is both my helmet and my built-in speakers.
  Can someone help me please?

  Hey Elliot,

  You did changes to the computer before the show?

  Try to configure the speakers as audio device by default.

  To do this:

  a. click on the icon sound in the Notification area.

  b. click Next, click playback devices.

  c. under the its , select the playback tab.

  d. right-click on the speakers , then click on defined as peripheral by default.

  
  

  If the problem persists, post your reply with the results. We are pleased to help you further.

• Drive hard sudenly started making noise beeps from scrathing and emits a sound at the same time?

  I was using my computer, looking at the pictures I got there with my camera and I had to get something up and closed the lid of my laptop. My Hd has started making a funny kind of like an alarm beeps scrathing, as the rally mixxed fast code rhythm to the sound of a fax machine. I turned it off, tried to restart always sound said I had to reinstall the hard disk and I tried a recovery and recovery disc windows can't find anything, this hard drive information is invaluable because it contains an amout of my web development, php, the GFX and work programming work. I have stored backups every month and online with carbonite, but here there are 3 weeks and the information currently on a project I was working on was more recent. I would like to know if there is a way to fixxing this problem or if I'm just F'ed and had to start over on 3 weeks of work?

  Just in case I'm done I have a few other drives I bought I can pass in and out. but I don't have a working computer in which I can make the ISO or burn DVDs to other 3rd party software, so if there is another problem I would appreciate it.

  This could be the click of death. Click here for more information and to see if it sounds like your problem

  http://www.TechwareLabs.com/community/showthread.php?p=71251

  It is possible to work for a short time by placing it in the freezer. For more information watch this 11 minute video in.

  http://Channel9.msdn.com/shows/the-defrag-show/defrag-ejecting-USB-devices-game-stopping-Windows-button-getting-mkv-file-thumbnails

  There are companies that can recover data from defective discs for a price.

  http://services.Seagate.com/index.aspx

• Helmet + pregnant at the same time

  How do you get sound from your headphones and speakers at the same time? I played with the settings, but it seems that you select each and make them 'default' to get a sound on their part one at a time.  I would use my headphones and speakers and do not have to continually change the settings.

  Hello MurseIRL,

  Thank you for your message.  To clarify, you try to get a sound from your speakers and headphones at the same time, or you are trying to get sound to play simultaneously on different applications.  It is not possible to play sounds at the same time by speakers and headphones because only can be default at the same time.  You can, however, play the sounds of two different applications (e.g. WMP12 and video game).  To do this, follow the steps below:
  Open WMP12, play a song with headphones being the default player.
  Open your second request and change the default player to the speakers.
  Your music will continue to play through your headphones while playing your second request through your speakers.
  Please let us know if this or do not answer your question.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Play two sound waves through two different sound cards at the same time?

  Hi all.

  With the help of old ship poles and the example of screw provided with Labview 2009 SP1, I could get a part of the path.

  The goal is to simultaneously play two .wav files, to two different sound cards. So far:

  (1) I can play a wav file for each sound card

  (2) I can generate two sinusoidal waves of different tones and put each two cards separately at the same time.

  But when I replace these two tones of #2 with .wav files, wave files play in turn. If wav_1 plays sound_card_1, THEN wav_2 plays sound_card_2, not simultaneously.

  It is even possible to play 2 wav files simultaneously on different maps?

  I've included a VI of the attempt to #2 above. WARNING: my labview skills are minimal and this vi was very experimental is probably terrible form.

  Why do you want to do this. Many modern sound cards have 5 channals output

• How to get two outputs at the same time?

  Hello

  I use the PCIe6351 DAQ card to generate two signals separately. This product has two exits, so I thought that I can use both at the same time, but when I run the code it gives an error: "the spesified resource is reserved. I just want to know if it is possible for me to use both outputs together at the same time or not? If so, would you please guide me what should I do to solve the problem?

  Thank you very much

  Soran

  Great! This works. I appreciate your help

• Continuous 5V output and signal of Stimulation at the same time

  Hello

  I'm out a constant signal to 5V to power a testbed and output a signal of stimulation (create a small magnetic field, etc.) at the same time.  I try to use DAQassistant with several output channels, but I can't fix an AO0 data set and the other set of data in AO1. Please notify; my code is up to this home.

  Thank you!

  Emily

  Many DAQ cards provides a constant voltage of + 5V output.  DAQ hardware do you use, and there a such output?  If so, use instead.  It will manage a current higher than an analog output.  The analog output lines are not designed to power no matter what, they are purely for signalling.

• I can't get two cards USB worked at the same time

  I use Labivew 8.6 to program an application using NI UBB-9211 and USB-6211 connection to two USB ports on my PC in order to measure the temperature and pressure (voltage) at the same time. Also, I need to generate two AOs of USB-6211 to drive my engines. I tested two cards, they are OK. But when I program them together, I get only 9211 worked, an error poped to acquisition of data USB-6211. Could you please help me on this? advice or examples of VI / would be greatly appreciated. Thank you in advance!

  Hi navistar.

  It seems that you should be able to do what you are trying to accomplish. Can you post some information about the error you receive? You use the lower level Assistant DAQ or DAQmx screws in your application? You can post a screenshot of your code where it is merged together and easier troubleshooting. You use any trigger of your application? We have examples in the example Finder (help > find examples) under Hardware Input and Output > DAQmx. These examples are a good place to start to build your application. If you already have the code work for each instrument and you have problems combining them, it might be easier to work with where you are at as opposed to leaving it everywhere.

• Is it possible to have the audio from two different sources and routed to separate outputs at the same time?

  I currently have a string of the guitar signal electric-Rocksmith Real Tone cable - ASIO 4 all help IK Multimedia Amplitube 3.   I would like to know if I could also watch DVD with her while the implementation of the programme of Amplitube with sound.  It would be great that I use the DVD for guitar and play at the same time.   I don't have the signal of two merged as one.  In my mind, I should be able to disable the ASIO devices and use them with DirectX as usual.  I could send the ampitube signal to the headphones and use external speakers for the guitar signal, and use the lessons of speakers for the DVD (or maybe YouTube) laptop on board.

  Is this possible?

  How can I do?

  Toshiba Satellite X 205-S7483

  Jeff

  Yes.  For example, I have my Skype phone calls go to my helmet (normal just plugged in the headset) while my media player plays my speakers.  You can choose your default communication or multimedia devices with a right click on the volume control icon and choosing "playback devices".

  Other programs can also be built to be "to the output current" and allow you to choose the output too.

• How to put in place two sound devices and make two of them work at the same time?

  I am on Windows 7 Ultimate and I have a problem...

  I downloaded the SRS Audio Essentials software that improves the sound quality

  And I have Realtek audio device which is an audio driver that come with bulit in sound card

  But the problem is that I can choose only one of them as the default audio device

  When I was with Windows Xp, two of them worked at the same time...

  He is the captain:

  http://www.Flickr.com/photos/96392754@N07/8812378555/

  Help, please!

  PS: Sorry for my bad English... ^_^

  Hello

  Unfortunately this does happen, as it is by design,

  Here, a single device can be marked as default device, follow these steps below for more information.

  a. Click Start, type Sound in the box to start the search.
  b. click sound in the results of search at the top of the start menu.
  c. click the reading notice the check mark next to the default device.

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• Lenovo L450 Dock Pro video output DVI and DP at the same time

  Hello

  I have L450 NB and Pro Dock station.

  I have question. Can I connect and use two monitors (1 - DVI, 2 - displayport)?

  In this link (https://support.lenovo.com/cz/cs/documents/pd029622) is writable:

  3 - any combination

  What it means?

  If I connect DP and DVI at the same time came out video only on DP.

  Is possible to use two screens on the digital output?

  Tomas

  maniakum wrote:
  Is possible to use two screens on the digital output?

  No, the DisplayPort and DVI Pro docking station port can be used at the same time. So, you need the Dock Ultra.

• Using Nvidia Geforce and Intel hd graphics card both at the same time for games

  Helloo,

  I am new to the community. I bought Lenovo y50 last month. It comes with the dedicated graphics card Nvidia Geforce gtx 860M and Intel HD 4600 Graphics intigrated. Its a portable game even if I am faced with leggings in some high permorfance games.

  Can I use the graphics card Nvidia GeForce and Indigrated Intel HD graphycs... the two all in games...?

  Thank you... Help will be appreciated...

  One thing you can do to ensure the highest perfomance on games is to go to the Nvidia Control Panel programs, manage 3D settings, then find the game you want and set to use only High Performance NVIDIA graphics (or discrete).

  You can not use both cards at the same time by writing this (DirectX 11), but with the arrival of Windows 10 and DirectX 12 July 29, you will be able to use both at the same time to increase performance. So far, however, it is simply not possible to use both at the same time. The best option is to use only the GTX 860 M.

• Can I acquire at the same time HAVE two cards of different acquisition installed on the same computer

  Here's my question:

  I have two different cards installed in a PC. Specifically, PCI-6224 and PCI-6254. I need to acquire 50 analog inputs (real time). Can I use two cards to do? I mean I can synchronize these two cards and acquire simultaneously several channels at the same time?

  Thank you

  Alessandro

  Yes. You can use a RTSI cable between them. See the examples of the expedition. If you are using LabVIEW, look at several Synch - Analog Input - Cont Acquisition devices.

• I have a DAQ Assistant configured to read several channels at the same time. When I have a graphical indicator of wire to the output, I see all my signals mixed together. How I divided them into separate signals?

  I have a DAQ Assistant configured to read 2 channels at the same time. When I have a graphical indicator of wire to the output, I see 2 signals mixed together. How I divided them into separate signals?

  When I wire any type of indicator, it is show that a release of a single channel.

  I want 2 indicators showing 2 different signals as expected from 2 channels configured. How to do this?

  I tried to use split signal but it end by showing that 1 out of 1 signal two indicators.

  Thanks in advance.

  Yes you are right. I tried, but I don't have the result.

  I just find the path. When we launch the split signal, we should expand it (split signal icon) by top, not the bottom. It took me a while to understand this.

  Thank you