Output of the coil of large table with millions of records
HelloI'm trying to simply take the exit of records in a table in the text file by using the query. I get error "ORA-01841 full year should be between 4713 and 9999 and not 0" after extraction of very few records in the table.
Here's the query I'm currently using:
SET THE POSITION
SET VERIFY OFF
SET SERVEROUTPUT OFF
TERMOUT OFF SET
SET FEEDBACK OFF
SET TRIMSPOOL ON
SET LINESIZE 32000
SET PAGESIZE 0
SET COLSEP «|»
Column MANDT A5 format
Column BUKRS format A5
Column BELNR A10 format
Column GJAHR A5 format
Column BLART A2 format
Format of column BLDAT A11
Format of column BUDAT A11
Column MONAT A5 format
Column CPUDT A10 format
Column CPUTM A8 format
Column AEDAT A10 format
Column UPDDT A10 format
Column WWERT A10 format
USNAM A12 column format
TCODE A20 column format
Format of column BVORG A16
Format of column XBLNR A16
Column DBBLG A10 format
Column STBLG A10 format
Column STJAH A5 format
BKTXT A25 column format
Column WAERS format A5
Column KURSF 999999999.99999 format
Column KZWRS format A5
Column KZKRS format 999999999.99999
Column BSTAT A5 format
Column XNETB A5 format
FRATH 9999999999999.99 column format
Column XRUEB A5 format
Column GLVOR A5 format
GRPID A12 column format
Format of column DOKID A40
ARCID A10 column format
IBLAR columns A5 format
Column AWTYP A5 format
AWKEY A20 column format
Column FIKRS format A5
Column HWAER A5 format
Column HWAE2 A5 format
Column HWAE3 A5 format
Column KURS2 999999999.99999 format
Column KURS3 999999999.99999 format
Column BASW2 A5 format
Column BASW3 A5 format
Column UMRD2 A5 format
Column UMRD3 A5 format
Column XSTOV A5 format
Column STODT A10 format
Column XMWST A5 format
Column CURT2 A5 format
Column CURT3 A5 format
Column KUTY2 A5 format
Column KUTY3 A5 format
Column XSNET A5 format
Column AUSBK A5 format
Column XUSVR A5 format
Column DUEFL A5 format
Column AWSYS A10 format
Column TXKRS format 999999999.99999
Column LOTKZ A10 format
Column XWVOF A5 format
Column STGRD A5 format
PPNAM A12 column format
Column BRNCH A5 format
Column NUMPG A5 format
Column ADISC A5 format
XREF1_HD A20 column format
XREF2_HD A20 column format
Column XREVERSAL A10 format
Column REINDAT A10 format
Column PSOTY A5 format
Column PSOAK A10 format
Column PSOKS A10 format
Column PSOSG A5 format
PSOFN A30 column format
Column INTFORM A8 format
Column INTDATE A10 format
Column PSOBT A10 format
Column PSOZL A5 format
Column PSODT A10 format
Column PSOTM A8 format
Column FM_UMART A8 format
NIEC A4 format column
CCNUM A25 column format
Column SSBLK A5 format
LOT 10 column format
SNAME A12 column format
Column SAMPLED A8 format
Column KNUMV A10 format
XBLNR_ALT A26 column format
ZZREASON_CD A12 column format
ZZREASON_DSCRPT A50 column format
coil bkpf.txt
Select MANDT, BUKRS, BELNR, GJAHR, BLART, decode (' BLDAT, '00000000', ' 00.00.0000', to_char (to_date (substr (BLDAT, 1, 10), "DD-MM-RRRR"),' JJ.)) Messrs. RRRR')) as BLDAT, decode ("BUDAT, '00000000', ' 00.00.0000', to_char (to_date (substr (BUDAT, 1, 10),"DD-MM-RRRR"),' JJ.)) Messrs. RRRR')) as BUDAT, MONAT, decode (' CPUDT, '00000000', ' 00.00.0000', to_char (to_date (substr (CPUDT, 1, 10), "DD-MM-RRRR"),' JJ.)) Messrs. RRRR')) as CPUDT, decode (cputm, '000000','00: 00:00', to_char (substr (cputm, 1, 2) |': ': substr (cputm, 3, 2) |': ' | substr (cputm, 5, 2))) as CPUTM,
Decode (' aedat, '00000000', ' 00.00.0000', to_char (to_date (substr (AEDAT, 1, 10), "DD-MM-RRRR"),' JJ.)) Messrs. RRRR')) as AEDAT,
Decode (' UPDDT, '00000000', ' 00.00.0000', to_char (to_date (substr (UPDDT, 1, 10), "DD-MM-RRRR"),' JJ.)) Messrs. RRRR')) as UPDDT,
Decode (' WWERT, '00000000', ' 00.00.0000', to_char (to_date (substr (WWERT, 1, 10), "DD-MM-RRRR"),' JJ.)) Messrs. RRRR')) as WWERT,
USNAM, TCODE, BVORG, XBLNR, DBBLG, STBLG, STJAH, BKTXT, WAERS, KURSF, KZWRS, KZKRS, BSTAT, XNETB, FRATH, XRUEB, GLVOR, GRPID, DOKID, PROFESSIONNAL, IBLAR, AWTYP,
AWKEY, FIKRS, HWAER, HWAE2, HWAE3, KURS2, KURS3, BASW2, BASW3, UMRD2, UMRD3, XSTOV, decode ("STODT, '00000000', ' 00.00.0000', to_char (to_date (substr (STODT, 1, 10),"DD-MM-RRRR"),' JJ.)) Messrs. RRRR')) as STODT, XMWST, CURT2, CURT3, KUTY2,.
KUTY3, XSNET, AUSBK, XUSVR, DUEFL, AWSYS, TXKRS, LOTKZ, XWVOF, STGRD, PPNAM, BRNCH, NUMPG, ADISC, XREF1_HD, XREF2_HD, XREVERSAL,
Decode (' REINDAT, '00000000', ' 00.00.0000', to_char (to_date (substr (REINDAT, 1, 10), "DD-MM-RRRR"),' JJ.)) Messrs. RRRR')) as REINDAT, PSOTY, PSOAK, PSOKS, PSOSG, PSOFN, INTFORM, decode ("INTDATE, '00000000', ' 00.00.0000', to_char (to_date (substr (INTDATE, 1, 10),"DD-MM-RRRR"),' JJ.)) Messrs. RRRR')) as INTDATE,.
Decode (' PSOBT, '00000000', ' 00.00.0000', to_char (to_date (substr (PSOBT, 1, 10), "DD-MM-RRRR"),' JJ.)) Messrs. RRRR')) as PSOBT, PSOZL,.
Decode (' PSODT, '00000000', ' 00.00.0000', to_char (to_date (substr (PSODT, 1, 10), "DD-MM-RRRR"),' JJ.)) Messrs. RRRR')) as PSODT, decode (PSOTM, '000000','00: 00:00', to_char (substr (PSOTM, 1, 2) |': ' | substr (PSOTM, 3, 2) |': ': substr (PSOTM, 5, 2))) as PSOTM, FM_UMART, NIEC,.
CCNUM, SSBLK, BATCH, SNAME, SAMPLED, KNUMV, XBLNR_ALT, ZZREASON_CD, ZZREASON_DSCRPT from sapsrp.bkpf where mandt = 200;
spool off
Please suggest what Miss me in this area, so that I can extract all records from this table.
Thank you
Manish
>
This issue is that all of these columns are to the date format, but when I try to extract data from these columns it comes like 20120606 (YYYYMMDD) while I need my output as DD. MM YYYY.
I used decode only to convert values to these fields in these columns, where the date was not entered and therefore containing 00000000.
>
This is simply not true. Did you read my response? You use "substr (BLDAT, 1, 10)" - so how can you say "the data in those columns happen like 20120606' which is only 8 characters long? Which does not match what you just said.
Also, as I said before, if you have data in BLDAT that contains ' 00000000' and then to the ' to_date (substr (BLDAT, 1, 10),...). ' throw an exception because you try to convert the 8 zeros of a date. This is the problem that you are experiencing.
BLDAT contains a string that is a valid date, or it doesn't.
You continue this problem posed by the same if you copy values such as "00.00.0000" as these will cause an exception when you attempt to convert their return at a date each time that data are used.
If you have at least two problems with BLDAT and the other two that I mentioned.
1. the data in the column are 8 characters or 10 length may not be both - use you 8 in the decoding and 10 in the substr
2. the data is either a string representing a date is valid or not.
If all values are "00000000" or a string such as "YYYYMMDD" then you need to use a decoding that creates ' 00.00.0000 "' if the value is '00000000' or makes a TO_DATE (BLDAT, 'YYYYMMDD'). In only one of the two values will be issued. Now you're different columns show two for BLDAT.
Suggest that experiment you with a simple query that contains only BLDAT until you get the process worked on how get the result without errors. Then expand the query to include other columns.
Keep it simple until it works.
Tags: Database
Similar Questions
-
How to get the title of a table with FDK?
How to get the title of a table with ad FDK C++?
I did people. I get objects table paragraph and later the textual elements for each of them.
-
GetLength errors on CLOB. Retrieves the size of a table with CLOB columns
Hello
I try to find the size of a CLOB to a table column and get the error
PLS-00306: wrong number or types of arguments in the call to "GETLENGTH.
When you try to use dbms_lob.getlength. Here is the code
declare
number num.
Start
for rec in (select xmlupload from FILE_TABLE where file_table_id = 33635) loop
NUM: = dbms_lob.getLength (rec.xmlupload);
end loop;
dbms_output.put_line (num);
end;
Database version: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
I'm actually trying to find the size of a table with CLOB columns, is there an easy way to do this Besides using getlength and without having to contact the Administrators (they are outsourced)?It works fine on my computer, the version is also 10g.
SQL> declare 2 num number; 3 begin 4 for rec in (select cntnt from ims_toms_msge where rownum<3) loop 5 num := dbms_lob.getLength(rec.cntnt); 6 dbms_output.put_line(num); 7 end loop; 8 9 end; 10 / 3837 3837 PL/SQL procedure successfully completed.
You should check if xmlupload is the CLOB data type.
In addition, if you just want to get the CLOB size, you can use LENGTH() as well, you will get the same result;SQL> select length(cntnt), dbms_lob.getLength(cntnt) from ims_toms_msge where rownum<2; LENGTH(CNTNT) DBMS_LOB.GETLENGTH(CNTNT) ------------- ------------------------- 3837 3837
Published by: PhoenixBai on September 24, 2009 13:40
-
output of the coil in .csv file - of the problems with the display of data
Hello
You will need to provide the result of a select query that contains approximately 80000 registration in a .csv file. A procedure is written for the select query and the procedure is called in the script of the coil. But few of the columns have the decimal point in values. For example, there is a personal_name column in the select query that says the name as "James, Ed. Then the output in different columns. Therefore, the data is being shifted to the right for the remaining columns.
Some could help solve this problem. I mainly used a procedure as the select query is about three pages, and so you want the script to look clear.
Script is,
AUTOPRINT activated;
Set the title.
Set TRIMSPOOL ON;
the value of colsep «,»;
set linesize 1000;
set PAGESIZE 80000;
variable main_cursor refcursor;
escape from the value.
coil C:\documents\querys\personal_info.csv
EXEC proc_personal_info(:main_cursor);
spool off;Hello
set PAGESIZE 80000 ;
is not valid, and it will print header as all the 14 ranks of default.
You can avoid printing the header in this way:set AUTOPRINT ON ; set heading ON; set TRIMSPOOL ON ; set colsep ',' ; set linesize 1000 ; set PAGESIZE 0 ; set escape / set feedback off spool c:\temp\empspool.csv SELECT '"'||ename||'"', '"'||job||'"' FROM emp; spool off
The output will look like this in this case
"SMITH" ,"CLERK" "ALLEN" ,"SALESMAN" "WARD" ,"SALESMAN" "JONES" ,"MANAGER" "MARTIN" ,"SALESMAN" "BLAKE" ,"MANAGER" "CLARK" ,"MANAGER" "SCOTT" ,"ANALYST" "KING" ,"PRESIDENT" "TURNER" ,"SALESMAN" "ADAMS" ,"CLERK" "JAMES" ,"CLERK" "FORD" ,"ANALYST" "MILLER" ,"CLERK"
Alternatively, you can consider creating a single column by concatenating the columns in this way:
spool c:\temp\empspool.csv SELECT '"'||ename||'","'||job||'"'
In this case the output will look like without spaces between the columns:
"SMITH","CLERK" "ALLEN","SALESMAN" "WARD","SALESMAN" "JONES","MANAGER" "MARTIN","SALESMAN" "BLAKE","MANAGER" "CLARK","MANAGER" "SCOTT","ANALYST" "KING","PRESIDENT" "TURNER","SALESMAN" "ADAMS","CLERK" "JAMES","CLERK" "FORD","ANALYST" "MILLER","CLERK"
Kind regards.
AlPublished by: Alberto Faenza may 2, 2013 17:48
-
Find the size of a table with partitions; Two questions
DB version: 11.2.0.4
Platform: Oracle Linux 6.4
The slot table MH_PKT_HEADR in UTMSBL schema has more than 5000 partitions.
Because there partitions, you cannot use just view DBA_SEGMENTS to determine the size of the table.
So, I tried to use 2 SQLs mentioned below. Query1 returned 5 GB. But Query2 has returned a value zero. Query2 is actually a note metalink mentioned below, so he cannot deceive you, I guess.
That is the reliable accurate query: Query1 or Query2?
No idea why Query2 returns a Null value?
- Query1
fixed lines 200
Col TABLE_NAME format a18
with
BaseData as)
Select the owner
nom_segment
segment_type
, round (sum (bytes) / 1024/1024/1024) GB
sum (bytes) bytes
count (*) segment_count
of s dba_segments
Group by owner, nom_segment, segment_type
)
,
LOB type as data)
Select the owner
table_name
nom_segment
of dba_lobs
)
,
all_segs like)
Select coalesce (lobs.table_name, basedata.segment_name) table_name
basedata.*
of basedata
left outer join
type LOB data
on (basedata.segment_name = lobs.segment_name
and basedata.owner = lobs.owner)
)
Select table_name
sum (bytes) bytes
sum (gb) GB
of all_segs
where table_name = 'MH_PKT_HEADR'.
and owner = 'UTMSBL. '
Table_name group;
TABLE_NAME BYTES GB
------------------ ---------- ----------
5869469696 5 MH_PKT_HEADR
- Request 2
-Source: how to calculate the size of a Table that contains outline CLOB and BLOB (Doc ID 118531.1()
SELECT
(SELECT SUM (S.BYTES) - the Segment of Table size
FROM DBA_SEGMENTS S
WHERE S.OWNER = UPPER ('UTMSBL') AND
(S.SEGMENT_NAME = UPPER ('MH_PKT_HEADR'))) +
(SELECT SUM (S.BYTES) - the size of the Lob Segment
FROM DBA_SEGMENTS S, DBA_LOBS L
WHERE S.OWNER = UPPER ('UTMSBL') AND
(L.SEGMENT_NAME = S.SEGMENT_NAME AND L.TABLE_NAME = UPPER('MH_PKT_HEADR') AND L.OWNER = UPPER('UTMSBL'))) +
(SELECT SUM (S.BYTES) - the size of the Lob Index
FROM DBA_SEGMENTS S, DBA_INDEXES I
WHERE S.OWNER = UPPER ('UTMSBL') AND
(I.INDEX_NAME = S.SEGMENT_NAME AND I.TABLE_NAME = UPPER('MH_PKT_HEADR') AND INDEX_TYPE = 'LOB' AND I.OWNER = UPPER('UTMSBL')))
"TOTAL TABLE SIZE.
FROM DUAL;
TOTAL TABLE SIZE
----------------
SELECT
(SELECT nvl (SUM (S.BYTES), 0)-dimensions of the Segment Table)
FROM DBA_SEGMENTS S
WHERE S.OWNER = UPPER ('UTMSBL') AND
(S.SEGMENT_NAME = UPPER ('MH_PKT_HEADR'))) +
(SELECT nvl (SUM (S.BYTES), 0)-Segment Lob size)
FROM DBA_SEGMENTS S, DBA_LOBS L
WHERE S.OWNER = UPPER ('UTMSBL') AND
(L.SEGMENT_NAME = S.SEGMENT_NAME AND L.TABLE_NAME = UPPER('MH_PKT_HEADR') AND L.OWNER = UPPER('UTMSBL'))) +
(SELECT nvl (SUM (S.BYTES), 0)-size of the Lob Index)
FROM DBA_SEGMENTS S, DBA_INDEXES I
WHERE S.OWNER = UPPER ('UTMSBL') AND
(I.INDEX_NAME = S.SEGMENT_NAME AND I.TABLE_NAME = UPPER('MH_PKT_HEADR') AND INDEX_TYPE = 'LOB' AND I.OWNER = UPPER('UTMSBL')))
"TOTAL TABLE SIZE.
FROM DUAL;
David Fitzjarrell
-
How to find the size of a table with CLOB
Hello
I have a table with CLOB as follows:
SQL > desc INFO_MESSAGES
Name Null? Type
----------------------------------------- -------- ----------------------------
CLNT_OID NOT NULL VARCHAR2 (16)
USR_OID NOT NULL VARCHAR2 (16)
LAST_client_msg_ID VARCHAR2 (36)
LAST_client_msg_DATE DATE
LAST_client_msg CLOB
LAST_USR_MSG_BOD_ID VARCHAR2 (36)
DATE OF LAST_USR_MSG_DATE
CLOB LAST_USR_MSG
Now I just want to find out what is the size/area total absorbed by the table (including the CLOB columns), so how can I find? I think that the usual command does not - the
Select format from dba_segments where nom_segment = "INFO_MESSAGES" is only showing 7 MB, while I think that the table has several GB of space due to the CLOB.
Also to add one more detail: when dba_segments seeking, I see a result like this:
Select * of dba_segments order by bytes DESC;
MIGRTN SYS_LOB0000111131C00008$ $ LOBSEGMENT SAMS DATA1 20690 6 1963 14528000 119013376000 <-the top row
MIGRTN this is the schema where this INFO_MESSAGES table is present.
Thanks,
OrauserN
you will need to add the segment_size of the LOB segments to the segment_size of the table. The connection between the two pieces of information you find in USER_LOBS (or the corresponding ALL_, DBA_ objects).
-
Problems with the sorting of a table with drop-down text cells
I have 2 subjects (among a number of topics), and each section has a table.
I followed Mr Grainge help to sort a table without an arrow and in heading 1, it does not work as expected. When I generate my WebHelp I can click on any one of my columns will sort the data. I can see the little black arrow head and black arrow head.
I know absolutely nothing about HTML and basically followed the instructions for help and got to work.
The second is a little different in that has 3 columns and rows about 375. The second column contains cells with the drop down text (but not all) as some have yet to be converted.
The questions are:
(1) a column will sort once only. So if I click on column 1, the head of black arrow appears. Subsequently, no amount of click will change the State of the data. I can sort the data on any of the 2 remaining columns, but I can never switch between ascendants and descendants of sequence on the same column.
(2) in Design view, I see all the data in each cell. After that I generated my WebHelp, some of the cells that contain drop-down text fields are missing. Some are, and some are not. Those who are there, work perfectly when I click on the text and the text of the menu drop-down appears. Each drop-down text field has a bookmark.
((3) continuous on 2) above, if I use the combination of keys ctrl-w in design, some of the cells that contain text to menu drop-down are missing (probably all those lacking in the Webhelp) and oddly, some of the borders of the cells (I used light blue) are missing. However, they are there in the WebHelp. A sample is attached.
Get my second table to work as I had hoped would be fantastic and worthwhile so far. However, I'm not quite there yet and need your help and suggestions.
Please see the last item in the list under the Notes. I suspect this is the problem.
See www.grainge.org for creating tips and RoboHelp
Follow me @petergrainge
-
By comparing the data in the pass of 2 tables - with a calculation
There are 20 records in 2 different tables (A and B). Records relate to periods between Jan 07 and 09 March. There is a logic that says that all records of 15 who are understood between Jan 07 and 08 Dec; their amount must be changed in Table B. While the amount for the rest 5 records that fall between Jan 09 and March 09 would remain the same. The formulas to be applied in the first 15 recordings is "amount/.50*0.125" and this result should take into account in the new table in the amount column.
Now the task to ensure that the calculation that happened correctly in table A, for these 15 records that fall between January 2007 and December 2008 in Table B, and that the amount is the same for the records for the period after January 2009. I will conduct trials only that the new amount after the calculation of business logic is reflected in the new column of Table B.
This, to a sql statement.
Thank you
Dushyou might want to try this pseudo-code
update [2nd table] set amount = (select t.amount / .50 * 0.125 from (select id, rownum rn, amount from [1st table] where period_date between '01-JAN-07' and '31-MAR-09' order by id) t where t.rn <= 15 and t.id = [2nd table].id) where id in (select t.id from (select id, rownum rn, amount from [1st table] where period_date between '01-JAN-07' and '31-MAR-09' order by id) t where t.rn <= 15)
It's even better if you can post the actual tables, columns and a few examples of data
-
FUSION table on millions of records takes too long
Hi friends,
I have two tables with the following data.
CS_DS_DETAIL: 15.8 million lines
SALES_DATA: 28,05 million lines
When I run the following MERGE statement he finished only 1% after 8 hours.
How can I make it work better. It's a simple Merge statement and we use Oracle 11 g.SQL> explain plan for 2 MERGE /*+ INDEX(dtl cs_ds_detail_pk,sd sales_data_pk) */ INTO sales_data sd 3 USING cs_ds_detail dtl 4 ON ( sd.item_id = dtl.item_id 5 AND sd.location_id = dtl.location_id 6 AND sd.sales_date = dtl.week_end_date) 7 WHEN MATCHED THEN 8 UPDATE 9 SET sd.cs_turn_ord = dtl.turn_plug_adj, sd.cs_promo_ord = dtl.promo_plug; Explained. SQL> SELECT * 2 FROM TABLE(DBMS_XPLAN.DISPLAY); PLAN_TABLE_OUTPUT ---------------------------------------------------------------------------------------------------- Plan hash value: 3300673510 ---------------------------------------------------------------------------------------------------- | Id | Operation | Name | Rows | Bytes |TempSpc| Cost (%CPU)| Time | ---------------------------------------------------------------------------------------------------- | 0 | MERGE STATEMENT | | 15M| 457M| | 2615K (2)| 08:43:12 | | 1 | MERGE | SALES_DATA | | | | | | | 2 | VIEW | | | | | | | |* 3 | HASH JOIN | | 15M| 4279M| 897M| 2615K (2)| 08:43:12 | | 4 | TABLE ACCESS BY INDEX ROWID| CS_DS_DETAIL | 15M| 723M| | 1319K (1)| 04:23:52 | | 5 | INDEX FULL SCAN | CS_DS_DETAIL_PK | 15M| | | 80488 (1)| 00:16:06 | PLAN_TABLE_OUTPUT ---------------------------------------------------------------------------------------------------- | 6 | TABLE ACCESS FULL | SALES_DATA | 26M| 6178M| | 929K (4)| 03:05:56 | ---------------------------------------------------------------------------------------------------- Predicate Information (identified by operation id): --------------------------------------------------- 3 - access("SD"."ITEM_ID"="DTL"."ITEM_ID" AND "SD"."LOCATION_ID"="DTL"."LOCATION_ID" AND "SD"."SALES_DATE"="DTL"."WEEK_END_DATE")
The tables are not partitioned.
Is there a way I can write this using the simple update rather using Merge?
Anyone think that update gives best performance that merge in this case?
Thank you guys for your time.
~ RedaIs there a way I can write this using the simple update rather using Merge?
There is nothing wrong with the MERGE, but if you want to use an UPDATE, you can try a modifiable join view:
update (select sd.cs_turn_ord ,sd.cs_promo_ord ,dtl.turn_plug_adj ,dtl.promo_plug from sales_data sd join cs_ds_detail dtl on sd.item_id = dtl.item_id and sd.location_id = dtl.location_id and sd.sales_date = dtl.week_end_date ) set cs_turn_ord = turn_plug_adj ,cs_promo_ord = promo_plug ;
Whatever it is, I agree with William... get rid of the index indicator!
-
output of the coil with break and invites
10.2.0.5 & 11.2.0.2 on linux & windows
From time to time, I have to run scripts that include a large data sets insertion of a large number of lines. I spool the results of these scripts, I'm coming back back and make sure that there are no errors. I put statements of pause between the different stages of scripts to try to ensure that the last part was successful prior to execution.
The problem I'm running into is that when I have the output coil, if there is a large amount of data to sift through, it's not all flushed to the file waiting until after that I hit enter to move forward after the break statement.
Is there a way to ensure that all data is flushed the real-time spool file and not kept in the buffer? I guess that it is held in a buffer.
For example, you can run the following and check the file spools at each break in the script. I do not see the number of rows returned for each select until after the next selected process or even once the script has completed.
main_test. SQL:
Set sqlprompt "" _USER'@'_CONNECT_IDENTIFIER > "".
set echo on
Set termout on
programmed on
set timing on
Set trimspool on
set pages 0
sname new_value by spool_name column
Select to_char (sysdate, 'yyyy_mm_dd_hh24_mi_ss')
|| '.' || sys_context (' USERENV', 'SERVER_HOST' ")
|| '.' || sys_context (' USERENV', 'DB_NAME' ") as sname
Double;
coil & & spool_name... Journal
--###############################
--#DEPLOYMENT # STARTS HERE.
--###############################
@test.sql
quick end of test
pause
"exit";
test. SQL:
Select 1, 2 from dba_objects;
quick end of the first statement select
pause
Select 1, 2 from dba_objects;
quick end of 2nd selection tool
pause
Select 1, 2 from dba_objects;
quick end of 3rd, select
pauseIt is best to use each time THAT SQLERROR EXIT if it is dangerous to proceed after errors occur. SQL * more empty and close a hold file.
Or you can close a hold file. Then, to ACCEPT... The GUEST... you have to spool to another file, or you can replace the existing one. -
A better way to treat the form as a table with the variable column type?
I wanted to make a column to return according to the status of a flag column as readonly. I have a column defined as follows in the report query.
Decode (sys_flag, 'Y', APEX_ITEM. DISPLAY_AND_SAVE 3, TYPE_CODE, APEX_ITEM. SELECT_LIST_FROM_LOV (3, TYPE_CODE, 'LOV_TYPE_CODE_LOV')) AS TYPE_CODE
To get the SRM process noting that column, I had to put this 'band of HTML code' to 'No', then the column attributes, I put:
"Expression HTML" to "#TYPE_CODE #
' Display under "to"text display (saves the State).
And then it took me to get new lines of work:
"Default of Type" to "Expression of PL/SQL.
'Default' to APEX_ITEM. SELECT_LIST_FROM_LOV (3, NVL(:P18_TYPE_CODE,'LOV_TYPE'), NULL, 'LOV_TYPE_CODE_LOV', ' NO')
This makes large, however submit that it seems that the checksum of line used by MRU included the raw HTML generated by the APEX_ITEM package and not just the value of the column. I worked around this by including an element hidden checksum and creating a process that replaces the checksum generated automatically with my custom.
Is there a better way to intercept this checksum, preferably before it is rendered on the page? I now hide the sum of hidden HTML control in the output HTML of another column, so it's a bit ugly. If not, is there an easier way to achieve what I'm looking for? I tried several combinations, and it seems to work better. It's just a shame there's no way to have a standard hidden column included in the SRM process.Hello
I tried different possibilities and seems to run the following:
Create a report questioning in NORMAL SQL function to help:
SELECT APEX_ITEM.HIDDEN(1,EMPNO) || APEX_ITEM.TEXT(2,ENAME) ename, CASE WHEN DEPTNO = 10 THEN APEX_ITEM.HIDDEN(3, SAL) || SAL ELSE APEX_ITEM.TEXT(3, SAL) END SAL, EMPNO, DEPTNO || APEX_ITEM.MD5_CHECKSUM(ENAME, SAL) DETPNO FROM EMP
Do not specify something special for column definitions.
Create a button that submits the page.
Create a PL/SQL process that runs "On submit - after calculations" and Validations, triggered by this button and using the following code:
BEGIN APEX_ITEM.MULTI_ROW_UPDATE('#OWNER#:EMP:EMPNO,1:,|ENAME,2:SAL,3'); END;
I've done here: http://htmldb.oracle.com/pls/otn/f?p=55041:35
Any element with the value of DEPTNO 10 has the value SAL, read-only, as otherwise it's editable. This is done by creating a hidden input field for the actual value, followed by the text version OR by creating a single entry field. This ensures that we have the correct number of SAL elements on the page.
APEX_ITEM. MULTI_ROW_UPDATE is the "manual" version of the MRU that you would normally get with a form of table and works for above normal as sql based query reports. The format of this very strict is that you must always allow for two primary keys. See the text of presentation here: http://download.oracle.com/docs/cd/B28359_01/appdev.111/b32258/api.htm#CHDFDACC
Andy
-
Hi all
For example I have script called
XYZ. SQL
coil roles.sql append.
exec ROLES (list = > 'CONNECT');
spool off;
coil users.sql append.
exec users (list = > 'XYZ');
spool off;
Now, if I run this xyz it put the output in a file of waiting including exec statements. I want a clean hold as file
Roles.SQL
create rolle connect;
Not like
SQL > exec ROLES (list = > 'CONNECT')
create rolle connect;
spool off
My SQL setting are
together set to echo on serveroutput on newpage 0 space 0 linesize 999 pagesize 0 comments off check out mandate
Set longchunksize 4000 trimspool on long 10000000
All ideasAdd them to your file xyz at the beging of the file,
SET ECHO OFF SET FEEDBACK OFF SET HEADING OFF SET TERMOUT OFF SET TRIMSPOOL ON SET SERVEROUT ON
You can add your other orders set as well.
Learn more about sql * more to define the commands here.
http://SS64.com/ora/syntax-sqlplus-set.html
G.
-
Select all / all - check the boxes in a table with multiple lines
Adobe Livecycle Designer ES2
Hello
I have several boxes that I need to do a check of all the option for. I work but this is inneficient and much time given the number of times it needs to be done. I need like 5 of these per page, 20 lines per page, 10 pages per document and about 7 total documents: S
During the click event of the box has the following code:
If (this.rawValue is '1')
{
Form1.facility.Table6.row2.Subform7.pharmacy1.RawValue = '1';
Form1.facility.Table6.Row3.Subform7.pharmacy2.RawValue = '1';
<>...
}
on the other
{
Form1.facility.Table6.Row2.Subform7.pharmacy1.rawValue = '0';
Form1.facility.Table6.Row3.Subform7.pharmacy2.RawValue = '0';
<>...
}The name 'subform7' does not change, table 6 made but I can always rename the rest of them, does not change form1, installing Exchange (and not only facility1, installation2... etc, has no guaranteed).With the help of this hierarchy is there a better way to check these? Here's what I was playing around with, but it did not work:for (var in form1.facility.Table6 myRows){Renamed all to be 'pharmacy '.myRows.Subform7.pharmacy.rawValue = '1';}If anyone can shed some light it would be great.You use formCalc and lines should be renamed so that LCD shows them as Row [0], row [1], row [3]... etc. in the hierarchy tab
I'm a little confused by the subform residing on a table row - although it is possible to do. So, I guess it's okay. A good way to ensure that you have the good SOM for the checkbox control is to CTRL-click one of these check boxes while your cursor is in the Scrpt Editor.
Good luck!
-
retrieve the information of partition table with lack of offline data file
I just restored a backup of a database. When I unzipped data files, I discovered that a single data file was so damaged in the starting order of the database, I had to put the offline data file. The tablespace which reports the data file holds the information of partition of a table. Since I have no archives from when the data file has been created, I know it is not possible to recover the data file, I have to recover as many lines as possible other files in the tablespace data but when export or create the table as what to choose in the affected partition get ORA-00376 : cannot read file 1624 at the moment.
is there a way to tell oracle to ignore the data offline file and export the remaining data file information?
Just to clarify my situation a little more;
iI have a table called PPGA_ACTABOPRE that is partitioned by HASH and has 20 partitions, each partition in a different tablespace and tablespace each have about 8 files of data. A data file in the partition 9 is missing and I want is to get the information from the files of the remaining data, but whenever I issue a select statement or an exp or anything I get ORA-00376.
I try to set the flag to ignore blocks corrupt with run DBMS_REPAIR. SKIP_CORRUPT_BLOCKS ('PPGA', 'PPGA_ACTABOPRE'); and then select the info but it did not work.
Any suggestion would be appreciated;
Thanks in advanceFor the actabopre_p08 partition, some files are available, and we're not. You can access data at the segment level, because some extensions are missing.
You would need to access the data by rowid. You could loop through dba_extents and use dbms_rowid.create to generate a list of ROWID that may exist in the available data files.
This may help: -.
http://kerryosborne.Oracle-guy.com/2009/02/saving-rows-from-corrupt-blocks/
http://kerryosborne.Oracle-guy.com/scripts/save_u.SQLPublished by: Robert Geier on March 12, 2010 15:33
-
SQL text of the query are output in the output of the coil-ed
Hello
I have s script that starts with sql * more:
My out.txt must contain all records from table1, where the fields are separated by a semicolon.SET SERVEROUTPUT ON SET LINESIZE 1000 SET ECHO OFF SET TERMOUT OFF SET FEEDBACK OFF SPOOL /home/scott/out.txt SELECT col_1||';'||col_2 FROM table1; --and my select statement here! SPOOL OFF
Unfortunately, out.txt also contains the text of the query itself:
How can I Remove the text of the query output?SELECT col_1||';'||col_2 FROM table1 ------------------------------------ 1;one 2;two AND SO ON!
Thank you!Looks like you want to delete the pages headers. VR;
set pagesize 0
Maybe you are looking for
-
How to allow my new iMac desktop computer to download previous purchases on the iTunes Store?
How to allow my new iMac desktop computer to download previous purchases on the iTunes Store? I transferred all of my information from my old Mac Mini to my new iMac, retina 4K, 21.5 - inch desktop computer via my Apple, WiFi, and Migration Wizard. M
-
How can I configure search to open in a new tab?
When I do a 'google' search I want to open it in a new tab... How is that defined?
-
Can we run through our Apple TV cable?
Is it possible to run our cable through the Apple TV in addition playback of Apple?
-
I try to install Nova Development Scrapbook Factory Deluxe 4.0 to my laptop. I get the error above to try to do. My laptop is Windows XP Home Edition with service pack 3 I thank for information, you may be able to offer.
-
Taskbar, removed by accident
You click view in the bar of tasks, accidentally disabled something and my family disappeared from the taskbar. I would like to take back. Help, please! 6584f61b-b71f-45F2-90d9-45e924a567cd 1.03.01