Output settings reset inside the DTS sound

Similar Questions

• Output video HDMI to the TV is fine, but audio not transferred to the TV

  HP G60-440US Notebook PC, Windows 7 32-bit. Laptop connected to LED TV via HDMI cable. Video output from the laptop to the Tv is perfect, but the sound is in the laptop speakers (NO SOUND OUTPUT OF TV). The play sound icon does not appear on the click with the right button on the VOLUME in playback devices. I've updated all the possible drivers and BIOS. Help, please

  Thank you

  Hello

  Check the document below:

  Connect a TV or monitor to your Windows 7 PC using HDMI

• My office has been reset to the factory settings. I am enrolled in my sync account, but my favorites that are on my laptop, did not came to the top. Now what?

  I was fortunately sync-ed a year betweem my computer laptop Mac iBook and desktop HP - a lot of bookmarks - I am a student. My office had a small problem and I got it clean and reset to the factory settings. I'm now creating upward. I installed Firefox and made Google my default search engine. Then I logged in sync - no problem (even email, password... I wrote it!) I clicked sync, but my favorites are not come to the top. I closed Firefox and re-opened, but still no bookmarks. I looked at the settings and everything is checked. I wouldn't change anything. What Miss me? Thank you.

  Both devices use new synchronization and more importantly on Firefox 30.

  If you you don't need the synchronization of the former, and even if you use the same address as used for synchronization of the old all should operate under the new synchronization.

  I think that the new synchronization drops devices that have not synchronized within the past 21 days.

  Former site of Firefox Sync: new Firefox Sync https://account.services.mozilla.com/ site: https://accounts.firefox.com

• every time I erase content and settings on my iphone 6 after reset at the start of my phone and after crossing the screen as Hello > select language > Connect wifi > my iphone doesnot ask me activation lock even if my unit is also found on

  every time I erase content and settings on my iphone 6 after reset at the start of my phone and after crossing the screen as Hello > select language > wifi connection > my iphone doesnot ask me lock activation that says that your iphone is connected with the old apple ID, please enter the id and password

  I always reset on find my optional equipment please tell me how to activate locking activation so that whenever I have factory reset my phone with finding my camera so my phone always ask an old apple and password

  I do not understand your question, but let me go with what I believe. Looks like you entered in iCloud and erased all the content and settings on the iPhone, and once you go by assigning back up again, you do not see something that you expect to see, for example, a request for an Apple ID. When you go through the installation process to select the language, etc., it must, at some point, ask you to identify yourself with your Apple ID. are you not see this?

  It would be better if you try to describe exactly what you do again. Also, without the help of any sign of punctuation, it is difficult to track everything you ask. Try providing the steps of what you do, and then what you see when you get to the point that you believe that something is going wrong. You mention both an old and new Apple ID, which is rather confusing.

• Air iPad does not connect to wifi. Network settings reset did not help. Unable to connect to the internet to do the software update.

  I can't connect my wifi iPad air. I tried;

  Reboot & force restart

  Reset network settings

  Connect the iPad to my Mac.

  I can't do a software update to 9.3.2 (without wifi). Seen on another thread to remove this update under settings > storage management. Tried, did not help. When I try to check the updates, I get this message "an error occurred while checking for a software update".

  Something is blocking your access to the update from Apple servers. Update iOS has never worked in this place before? Have you tried to use iTunes to update to iOS?

• Reset to the factory settings without restoration. Why do I see previous contacts?

  I have a new 5 iPhone.

  I added 6 contacts, 2 new downloaded applications. Saved on iCloud and iTunes.

  I had a very old Apple ID with an email address that I no longer use.

  I created a new Apple ID online by using this:

  Change your Apple - Apple Support ID

  Probably because of something, that I was wrong, there is a conflict between this new Apple ID and one on my iPhone.

  No problem. Because I only had 6 contacts and two additional applications, I decided to reset to the factory settings. I do NOT accept the offer to restore a backup.

  So I guess I now have a new phone out-of-the-box.

  In fact, my 6 contacts were always present. The two extra apps were not present.

  I would be very grateful if someone could explain why the 6 contacts are always present.

  I wonder how many other things could be hiding somewhere, which would not be present out-of-the-box.

  You can use a computer and connect to https://www.icloud.com/ and check the Contacts app it (under the two identifications of Apple as I'm not sure of the exact sequence of events that you did). If they are there and if you have settings > iCloud > Contacts under tension, which could explain from whence they came. With this setting, any changes to the Contacts is immediately synchronized between iCloud and the phone as soon as it is connected to iCloud.

• With GarageBand music itself inside the material and sound materials makes new music

  With GarageBand music itself inside the material and sound materials makes new music

  This kind of music can be put in the game when the background music

  I don't know about this

  Y at - it friends who know say me thank you very much

• I recently bought a used iPhone 6, I was able to reset the phone to factory settings, but unfortunately, the iPhone is still under an other customers Apple ID, is it all the same way I can have this changed?

  I recently bought a used iPhone 6, I was able to reset the phone to factory settings, but unfortunately, the iPhone is still under an other customers Apple ID, is it all the same way I can have this changed?

  Turn off find my iPhone Activation Lock - Apple Support

  contact the person you bought the phone from and their info to remove the lock of the activation.

• Setting up Deskjet 6988 for wireless printing after a reset to the factory settings, using Mac OS 10.8

  Hi - How re - connect to my printer wirelessly after a reset to the factory settings? I use Mac OS 10.8. The network on the printer flashes, and on the Mac, it is listed as "not connected". And the page of report confirms that he has lost all of its data.

  Fortunately, I made a report page before resetting, so I think that I know all of the critical information, I need to come back here, but I can't figure out how to do this.

  I read the installation guide, who said to use an ethernet cable and the CD of HP, but I don't have the CD anymore.

  I tried an ethernet cable and entering the IP address of the printer, but which did not, perhaps because it has more this IP address.

  I tried the steps hereand downloaded the latest version of the HP update software software, but I don't see my printer. I went from my wifi to hpsetup network and then I could see and add a second new instance of my printer, but it did not help, because this second instance of the printer is not connected or the other.

  Interestingly, when I am connected to hpsetup, I can print.

  Can someone help me to re - connect this printer? I'll save the reason for reset for another post!

  Thank you very much!

  FIXED! Sunshyne2005, thanks a lot to direct me to the solution!

  Here's what worked:

  1. Connect to hdsetup
  2. Press the report Page button on the printer (the one with the box)
  3. Continue with step 3 of the Sunshyne2005: open a browser and enter the IP address of hdsetup.
  4. Look around for the wireless configuration wizard (sorry, I can't access is no longer hdsetup, and I just don't remember where it is)
  5. Enter the SSID (name) of the wireless network and the password
  6. Note: You will see a button to finish, but it has no effect. At this point, the printer is successfully added to the wireless network and access the hdsetup disappears. Therefore, the wizard will no longer work, but the important thing is that the printer is connected. : )

  Thanks again, Sunshyne2005!

• Best settings for Canon A1200 decision-making inside the image

  I need to take a high quality photo with my Canon PowerShot A1200 camera for my site one of my pieces of wood art that I have craft.  It is tie wooden a man and is shown on a model of human torso (about 1 1/2 ' wide, 2' 1/2 high), so that the image will be large rectangle. The photo is taken in a light inside the box.

  Because I try to display all images on my site as the place, I'll have to put the picture of rectangle in a square frame swamp.

  I have little to know the skills in how to take a good photo. I use a tripod and use the timer. Suggestions and recommended settings will be appreciated.

  You ask for help in taking the photo or in the treatment of her after taking? If you have a part of the photo album must be stretched forward if you are using a tripod, but if you need help editing / cutting / filling a canvas etc is a great & very depends on the software you own or need to buy.

• Service Pack 1 will not install after that the pc has been reset to the factory settings

  At my pc reset due to problems of crashing and freezing factory settings, when turned on after resetting received masses of updates Service Pack 1 has not been installed, but it shows in the story as being successful. He reappears in the form of waiting for update installation, but when the terms & Condtions accepted the installation takes a few seconds, history shows successful but it has not yet installed. So I can't install SP2 to update Internet Explorer 9

  Hello.

  Thanks for the reply. I found a previous question with a similar problem as mine, there was a solution that I followed and was able to install SP1. I should have done this before my question!
  I also installed SP2. Resetting to the factory settings was a last resort due to a problem I was experiencing, but after installation of SP2 my original problem reappears. The problem is now in terminal phase and looks like a new pc.
  In any case, once again thanks for your help, I know where to go with future questions I have.
  John

• NVIDIA HDMI output - not plugged in (?) = no sound on the TV, but great picture!

  Hello

  I'm not very experienced in the computer, but I know now that the connection from your laptop to a flat screen HDMI cable TV is not as easy as it should be...

  Description of the problem: no sound, but the big picture on the TV when connecting to my HP dv7 entertainment PC through HDMI to it. Specifically: for NVIDIA HDMI output icon is grey and not active in the "pilot sounds and reading - menu" - you can not simply give (other icons that are active are: speakers and headphones double, double independent headphone & SPDIF). You can also see the TV under "Control panel" > "Devices and printers" - so the tv is connected. In Device Manager, I see that I have 2 sound processors (?) "IDT High Definition Audio CODEC" and "NVIDIA High Definition Audio" - I don't know one that is used for the HDMI connection.

  I have at my own risk installed the latest driver (?) for my graphics (NVIDIA Geforce 9600 M GT) - before I did, the NVIDIA HDMI output icon participated actively in the "... sound"-menu (so you can turn it, etc.)- but no sound on the TV and then either...

  I suspect there to be something wrong with the drivers for my graphics card or processor... or maybe you can't send sound to the tv with my cable? It's a standard HDMI cable...

  Laptop model nr: HP Pavilion dv7-1094eo

  Operating system: Windows 7 Professional 64-bit don't know ServicePack... .

  Graphics card: NVIDIA GeForce 9600M GT

  HDMI cable, tv LCD Philips model: 37PFL7605H

  If someone could help please advise me on what drivers to install or anything else, I would be very grateful!

  / Marie
  

  First do you uninstall IDT High-Definition Audio CODEC Driver and NVIDIA GeForce 9600 M GT drivers by going to

  Control Panel\Programs\Programs and features.

  In case if request you a restart of the computer, please make sure that restart you one after the other. Do NOT avoid restarting the computer.  So go ahead and download view updated and audio drivers from the HP website here.

  Yet once, after installation if you are prompted to restart the computer, go ahead and restart the computer. Once done, go to:

  Control Panel\Hardware and the sound and click on sound. On the Read tab, right-click on the white (empty) space and you will see 2 options (see the disabled devices and show disconnected devices). Make sure that both options are checked for all devices listed reading.

  Now, right click on the option to output HDMI device and make sure that the option "set as default device" is selected for the sound of the external display during playback picture on external monitor.

• How to reset to the default settings for Windows Media Player

  I ran the troubleshooting and now need to reset the Player multimedia default settings how to do this?

  You can reset WMP the default settings in the Control Panel, programs, troubleshooting, WMP settings [WMP reset to default values]

  If that did not solve the problem you're trying to fix then perform these two steps [they are the closest thing possible to uninstall then reinstall WMP & will actually provide a new installation of WMP]

  1 unload WMP - Panel, programs and features, [left] turn on or off has Windows, multimedia features, clear box Windows Media Player, Yes, OK, restart the PC.

  2 reload WMP - Panel, programs and features, [left] turn Windows features on or off, multimedia features, set the Windows Media Player box, Yes, OK, restart the PC.

• BlackBerry 8520 smartphones resetting to the factory settings

  Hi there at - there a way to reset a bb to factory settings without using the button of bb in advance thanks

  Without using the Blackberry Menu button?

  Set a password for security on the device, then enter the incorrect password on the device ten times.

  I don't think the Menu key will be necessary for this.

• I want to reset all the gpo admin, security settings, etc. by default setting. Is there a script file, treatment by batch or reg I can access?

  I want to reset all the gpo admin, security settings, etc. by default setting. Is there a script file, treatment by batch or reg I can access?

  Hello

  I suggest you to send your query in the TechNet Forums to get help.

  http://social.technet.Microsoft.com/forums/en/category/w7itpro

  It will be useful.