OVD: Not a connection is valid. Check if the server is SSL is activated.
Hi all
If I try to connect with the /odsm repository, pops up the following error:
Not a connection is valid. Check if the server is SSL is activated.
I don't know if someone has changed our Setup, because OVD-connection was correct. How can I insulate the position of the error?
Kind regards
Ministry of health
Please run
I hope this can help, Thiago Leoncio
Tags: Fusion Middleware
Similar Questions
-
I updated Firefox on my Mac (10.6.8), and now the story is not known (that option is checked) and the back button will not work. Help?
One possible cause is a problem with the places.sqlite file that stores the bookmarks and history.
- http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
- https://support.Mozilla.org/KB/bookmarks+not+saved#w_fix-the-bookmarks-file
You can also try to repair the database of places with this extension:
-
Hello
I have MsSql running in the cluster environment and recently face the problem when there is a security agent installed in MsSql server, which the agent does nothing but only to capture the local database activity. The error led is as below:ID from step 1
Server NIBKSQLCLUST
Job name LSBackup_DRIB
Newspaper log shipping backup job step name.
Time 00:00:02
SQL severity 0
SQL Message ID 0
Operator by e-mail
Operator Net sent
Operator paged
Retries attempted 0
Message
2011-03-21 08:00:02.62 * error: could not retrieve parameters of backup for primary ID '26f46141-a676-41b2-8653-11f1b13de43a '. (Microsoft.SqlServer.Management.LogShipping) *.
2011-03-21 08:00:02.63 * error: could not connect to the server NIBKSQLCLUST. (Microsoft.SqlServer.ConnectionInfo) *.
2011-03-21 08:00:02.63 * error: a connection has been established with the server, but then an error occurred during the connection process. (provider: Named Pipes Provider, error: 0 - no process is on the other end of the pipe.) (.Net SqlClient data provider) *.
2011-03-21 08:00:02.63 - END OF THE TRANSACTION LOG BACKUP-
The process to run correctly when I turned off the security officer. Advice kindly the cause of this problem and is where all configurations should be set / changed in MsSql server.
Thank you
Boonlep coulibaly
Hello
I suggest you to send your request from the link and check.
-
Startup Repair has worked 9 hours from WAU to go home 7-7 pro running. System is not blocked because I have control of the mouse and HD shows activity. What is the problem?
I would be out of system repair and safe boot mode:
Start your PC, just before the system loads the Windows operating system; Press the [F8] key function 8 on your keyboard which will launch the menu Advanced Boot Options. Select Safe Mode.
Click Start
Type: CMD, according to the results, right-click CMD
Click on "Run as Administrator"
At the command prompt, type: sfc/scannowThis will check for any breach of integrity
Restart your system
-
Hello
I use the ODP.NET 11.2 (Oracle.DataAccess.dll 4.112.3.0) for .NET 4.5 (in Visual Studio 2012). I can connect to 11g databases but when trying to connect to 9.2.0.8 database, this error is thrown:
ORA-03134: connections to this version of the server are no longer supported
I do not understand why, like I could connect using Toad, but not a .NET application.
Furthermore, I use Windows 7 64 bit.
Any idea?
Thanks in advance,
Dave
Hi Dave,.
I see that you have version 12 of the supplier in the GAC (i.e. Version = 4.121.1.0). But only for the x 86 and you mentioned that you had Windows 7 64 bit. Your application is compiled as x 86, x 64 or Any CPU?
You have confirmed that your application does not load this version? For example, because policy redirects in the GAC (such as Policy.4.112.Oracle.DataAccess, Version = 4.121.1.0).
You can use a tool such as SysInternals Process Explorer or the Assembly Binding Log Viewer (i.e. the SDK fuslogvw) to confirm if necessary.
It is true that version 12 would return ORA-3134 when you attempt to connect to a database of 9.2 because this combination is not supported.
Thank you
Mark
-
Don't get is not to push the checks on the server
Hello
I have a server that uses the BlackBerry push format https://developer.blackberry.com/devzone/develop/enterprise/enterprise_blackberry_push_format.html to send push messages to our customer. It works very well.
I've added the following headers to POST messages when sending from the shoot:
X-Rim-Push-reliability: the value 'transport' and
X-Rim-Push-NotifyUrl: point to a POST method on a web service, I have running. This is the signature of this method:
[OperationContract] [WebInvoke(UriTemplate = "Feedback", Method = "POST")] [CorsEnabled] void PostFeedback();
Now, even if outbreaks are sent fine to the device, the notifyURL never is called from our MDS Server. I checked that the service is accessible from the BES.
Inspect newspapers MDAT on the BES I see these lines:
Notify the URL =
, pushId = 3, 2b0a9a9e, result code = 400 net.rim.protocol.iplayer.e = destination: Connection Timed Out, State = timeout > Is the 400, indicating that the surge has expired or that the HTTP request to my service has expired?
What do I need to configure something on the BES? The BES is running 10.2.4.14 version and the unit is a Q10 running latest OS 10.3.1.
OK, I realized that things went wrong:
1. all docs BB (https://developer.blackberry.com/devzone/develop/enterprise/enterprise_blackberry_push_format.html) that the service must expose a POST method for push notifications. I inspected newspapers monitoring WCF and, to my surprise, I discovered that the SDM actually makes a GET request!
Then, that it is a GET request, I changed and I started to receive notifications.But now, I was faced with a different problem. I've been putting X-Rim-Push-reliability in transport, which suggests that no acknowledgement of the thrust is required by the app, but I was still getting 400 on the push notification, which suggests that the push has never reached the device (even if she did).
2. I updated the client application to acknowledge receipt of the push notification, and now my service becomes 200 for the status of push.
You should really update your documentation on this! I spend several hours trying to figure what was wrong on my side until I realized that the docs were outdated or false! This is not the first time that I'm having problems with your API... And the fact that I almost never get all the answers here is discouraging... Please fix this
-
Hello
Using the last version of the Console 12.1.0.4 cloud. I discovered a RAC cluster consisting of two nodes.
And if I "try access the Cloud Console ASM instances will fail with this error:"
IO error: the network adapter could not establish the connection
The connection descriptor has been
(DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = tcp)(HOST=rac1-vip.localdomain)
(PORT = 1522))) ((CONNECT_DATA = (SERVICE_NAME = + ASM1) (INSTANCE_NAME = + ASM1 (SERVER = DEDICATED))(UR=A)))
My env is:
Console of clouds on: release of Red Hat Enterprise Linux Server 6.6 (Santiago)
Database Rac: Red Hat Enterprise Linux Server release 6.5 (Santiago)
Someone knows how to solve this problem?
Thank you very much!
Arturo
(1) what is the user id you are using OEM fior?
The user id should have Sysdba and should not be in the role SYSASM.
(2) in order to check your port
In server, in the gate of the House, listener, lsnrctl status--> Verify asm instance listed on your listening port.
Summary of endpoints listening...
(Check that the PORT and IP information is correct)
Instance '+ ASM1' READY State, has 1 operation for this service...
(3) in addition, connect to asm and check the connection
Show u local_listener and entered into OEM parameter details are correct.
(4) OEM, I think you add Cluster_ASM.
Oracle_home_path--> you're grid House
username--> with sysdbarole
--> Sysdba role
Cluster_name--> $GRID_HOME/bin/cemutlo - n
Service name--> + ASM
ADD
NAME: INSTANCENAME
-Home: HOST1
listener_HOST-->< show="" parameter="" local_listener=""> > exit
PORT-->
SID- + ASM1
Concerning
Krishnan
-
The following error occurred in Acrobat when you try to click version history documents in SharePoint 2010. "The URL you provided could not be reached. Check that the URL is correct and that the network location is accessible. "The revision of the document is accessible, but through type HTTP via a web browser... but not through SharePoint <>== magic Acrobat X Pro COM object that works very well for currently extracted from documents. Please see image inserted. Reflections on a fix?
Visitors have not been confirmed, but given the problem reports to is completed 6 months ago, it seems updated for the latest version of product fixes the issues.
-
Software update does not work it keeps trying to connect in vain for updating the server.
First message box: "It is strongly recommended that you apply this update as soon as possible..." Next (click Next)
Following message box:
"Download Firefox... "Connection to the server to update.
Moving green dotted line shows the current connection but nothing happens, so I close the box when I shut down the computer - sometimes hours later.The best is to go to http://www.mozilla.org/en-US/firefox/new/ and download the full installer on your desktop. Closing Firefox. Run the Setup program and re-open Firefox. If the update fails the next time, open a new question or post here.
-
Cannot connect heartbeat console to remove the server?
Hello
I am trying to connect the console of the heartbeat on my Win7 PC serving heart rate on my 2 machines in the vcenter, but I get "could not connect to host x.x.x.x: 52267 port» On each of the machines vcenter, if I run the HB Console, I can connect to the local computer, but not the remote vcenter Server (with the same error).
Reading the documentation, I opened the entrants (tried leavers so) firewall for TCP 52267 port. I checked this port is open, as when I don't have the enabled rule, if I run "telnet x.x.x.x 52267' I get no answer. When I have the enabled rule (the port is open) and I run the same telnet command, I get an answer (it was garbage, but who is not serious, he said that the port is speaking). I tried to use the nfgui.exe in the firewall so rules, but that does no better (is this true? the nfgui being the console itself, a connection from another machine don't know the name of this process, right?).
When I turn off the firewall, everything works fine, but as it comes to Windows, is not an acceptable solution. Is there another port or range should I open?
Thank you
Jason
Hi Jason,
You must add a firewall on the server vCSHB rule to allow incoming connections to the process of the heart rate (by default C:\Program VMware vCenter Server Heartbeat\R2\bin\NFServerR2.exe)
-
Not able to install Management Agent on the server no - WHO, different platform
Hello
I run 12.2 of the WHO on a Linux platform and must make a 64-bit Windows Server a target managed by getting the installed Management Agent.
The Agent software for the server to Win 64-bit platform has been downloaded using the console auto update. However, I can't add the target host because it maintains have reported that I have selected a platform for which software Management Agent is not available on the WHO and I want to use the update auto etc.
So, after that I downloaded the agent software for Windows 64-bit at WHO, using the self updated fucntion, in the list of the software updates Agent, I see:
and when has highlighted in the past, activities list it shows shares"available"and then "Download", both with the status of successful operation.Downloaded | Microsoft Windows x64 (64-bit) | 12.1.0.2.0 | Oracle | Agent Software ...
So now, I'm going to: Setup - Add Target - add targets - manually add hosts
I add an entry, fill in the IP address and choice of platform (win 64-bit), but the platform name is added with * "Unavailable software Agent" * then recommend me again to download the software for this platform using auto update !
Just in case, I made a new connection in the OEM but which did not help.
Can anyone suggest me please an action plan to "fix" it?
Thank you very much!
EdHello
After downloading the software agent, do you have one apply?
If not, then pls do more...
Setup > extensibility > auto update > click agents
in "actions" drop-down menu, select apply.
You can always check the software available in your OMS agent using emcli.
Use this command to get the list of the avlbleemcli get_supported_platforms
-
Of nowhere while he was working on some homework, windows removes a stress load on my head that I don't have right now. I got a notice that I don't have a genuine copy of Windows 7 with error 0xC004F063.
I have to go to work now, but will return as soon as possible to deal with this. Any help you can offer would be great, I tried to do the thing SLUI.exe 4 but there is no option to even activate over the phone for me. He just told me to buy a new license.
Here are the:Diagnostic report (1.9.0027.0):-----------------------------------------Validation of Windows data-->
Validation code: 50Code of Validation caching online: 0x0Windows product key: *-* - 4F8HK - M4P73-W8DQGThe Windows Product Key hash: Xs1iQgVeo0C + sObJxS7eu + FuBPQ =Windows product ID: 00359-OEM-8992687-00057Windows product ID type: 2Windows license Type: OEM SLPThe Windows OS version: 6.1.7601.2.00010300.1.0.003ID: {7DD0A71A-0C8F-4CC5-A561-D272EC4D86F2} (3)Admin: YesTestCab: 0x0LegitcheckControl ActiveX: N/a, hr = 0 x 80070002Signed by: n/a, hr = 0 x 80070002Product name: Windows 7 Home PremiumArchitecture: 0 x 00000009Build lab: 7601.win7sp1_gdr.120830 - 0333TTS error:Validation of diagnosis:Resolution state: n/a
Given Vista WgaER-->ThreatID (s): n/a, hr = 0 x 80070002Version: N/a, hr = 0 x 80070002
Windows XP Notifications data-->Cached result: n/a, hr = 0 x 80070002File: No.Version: N/a, hr = 0 x 80070002WgaTray.exe signed by: n/a, hr = 0 x 80070002WgaLogon.dll signed by: n/a, hr = 0 x 80070002
OGA Notifications data-->Cached result: n/a, hr = 0 x 80070002Version: N/a, hr = 0 x 80070002OGAExec.exe signed by: n/a, hr = 0 x 80070002OGAAddin.dll signed by: n/a, hr = 0 x 80070002
OGA data-->Office status: 109 n/aOGA Version: N/a, 0 x 80070002Signed by: n/a, hr = 0 x 80070002Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3
Data browser-->Proxy settings: N/AUser Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)Default browser: C:\Users\Fauxe\AppData\Local\Google\Chrome\Application\chrome.exeDownload signed ActiveX controls: fastDownload unsigned ActiveX controls: disabledRun ActiveX controls and plug-ins: allowedInitialize and script ActiveX controls not marked as safe: disabledAllow the Internet Explorer Webbrowser control scripts: disabledActive scripting: allowedRecognized ActiveX controls safe for scripting: allowed
Analysis of file data-->
Other data-->Office details:{7DD0A71A-0C8F-4CC5-A561-D272EC4D86F2} 1.9.0027.0 6.1.7601.2.00010300.1.0.003 x 64 *-*-*-*-W8DQG 00359-OEM-8992687-00057 2 S-1-5-21-4252885419-3906351918-2397252778 TOSHIBA Qosmio X 505 TOSHIBA V2.90 20101210000000.000000 + 00066DE3707018400FC 0409 0409 Central Standard Time(GMT-06:00) 0 3 TOSQCI TOSQCI00 109
Content Spsys.log: 0 x 80070002
License data-->The software licensing service version: 6.1.7601.17514
Name: Windows 7 HomePremium editionDescription: operating system Windows - Windows (r) 7, channel OEM_SLPActivation ID: d2c04e90-c3dd-4260-b0f3-f845f5d27d64ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059fExtended PID: 00359-00178-926-800057-02-1033-7601.0000-2902012Installation ID: 000000644431633803415351396466594251506555016825187175Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340Partial product key: W8DQGLicense status: NotificationNotification reason: 0xC004F063.Remaining Windows rearm count: 3Trust time: 16/10/2012 14:44:22
Windows Activation Technologies-->HrOffline: 0x00000000HrOnline: 0xC004C533Beyond: 0 x 0000000000000000Event timestamp: 10:16:2012 14:19ActiveX: Registered, Version: 7.1.7600.16395The admin service: recorded, Version: 7.1.7600.16395Output beyond bitmask:
--> HWID dataCurrent Hash HWID: OAAAAAMAAgABAAEAAAAEAAAAAgABAAEAln1cwwPfdxZtNfBLiIL6bRSJilL tCeUES5ganqRXF0 plus
Activation 1.0 data OEM-->N/A
Activation 2.0 data OEM-->BIOS valid for OA 2.0: YesWindows marker version: 0 x 20001OEMID and OEMTableID consistent: YesBIOS information:ACPI Table name OEMID value OEMTableID valueAPIC APIC PTLTDFACP INTEL CALPELLAHPET INTEL CALPELLASTART PTLTD $SBFTBL$MCFG INTEL CALPELLASLIC TOSQCI TOSQCI00SSDT PmRef CpuPm
Activate using the key on the sticker of the laptop and you should be OK.
J W Stuart: http://www.pagestart.com
-
I have problems related to the record of the stream on the server side. Using Stream.get ("abc") to get the stream and Stream.record (false) and Stream.record () to launch the recording to stop recording on main.asc file. After the whole process, I can see the .flv file in folder of watercourses, but can't make it to play this saved .flv file.
If I duplicate the same .flv file saved to the same folder, I can play the copied file.
I can play the saved original .flv file only if I restart FCS. Somehow his problem associated with free resources for the stream, do not know what.
Does anyone have an idea of what's going on?Sorry... for some reason, I got is in my head that a client has been connected to the stream.
I don't know of a way that you can get rid of a live stream without using Stream.clear (), but in your case, it would remove the flv. As far as I know, you will need to use a starting value for your ns.play argument.
-
For about 2 weeks, I've been unable to use sync. I get a message that says the server maintenance is underway and will automatically resume. How long will the interview last? I have urgent need to transfer my story to a new laptop and the one I'm currently back. My deadline is tomorrow that I have run out of time to complete this process
In case you can not Sync works for you before you need to activate in this old laptop, you must backup your Firefox data to a USB key or other support.
https://support.Mozilla.org/en-us/KB/back-and-restore-information-Firefox-profiles
When it comes to your bookmarks on this old laptop, you must export your bookmarks to an HTML file so that you have a file that can be imported and merged with the all new bookmarks that you may be saved on the new laptop.
https://support.Mozilla.org/en-us/KB/export-Firefox-bookmarks-to-backup-or-transfer -
Unable to connect to Oracle UCM, but the server seems to work
Hey everybody,
So when I point my browser to my cms url, I get to the standard landing page the defaul 'comments' to the Home Page.
When I click on the link to try and connect, I can't connect.
I ran the IdcServer command and the server seems to be generating a log output. I also ran the idcserver_start command and the command idcadmin_start.
Poth have process IDs. However, I am still unable to connect.
All the world has never met a problem like that, or know the two fix/debugging better?
Thank you!
Hey guys,.
I solved the problem. The apache server had stopped running, there's nothing listening on the port that is used to access our content server.
Thank you all for helping me along
Maybe you are looking for
-
Where can I buy or get a 2710 x dvd battery cover?
Anyone where I can buy or get a 2710xdvd battery cover? (only part P000297400) to the United Kingdom?
-
Most of the time when I power on I get the message "contact service provider". Rarely, I get the message "Enter subsidy password". Obviously the later I have to enter my unlock code. How can I get to this point?
-
Windows driver 3 11 motion control 10 Yoga
Unfortunately I lost the control of movement/gesture after the upgrade to windows 10 Continue to check the drivers lenovo lenovo Web site... nothing There's always a gesture control for compatible with windows 10 3 11 yoga All software is still on my
-
Write to the file of text formatting issues
My apologies if I touch on a topic that is discussed elsewhere. I have two questions, which seems to be related, I'll have to overcome the difficulties. I date of blood collection, converting it to a temperature and then writes the timestamp, tempe
-
Simple Pass access to Windows problem
Hello I'm asking this on behalf of my brother who has a new laptop and gives his Windows to pass Simple password but now when it tries to connect it comes up with this message and don't let him: Access to windows cannot be granted until you log in wi