Overview of the animation Flash is all white
I use Flash CC on a windows computer. My document is a HTML5 canvas. I have my all finished animation, except for the button action. I tested the animation before you add Actions and that it appears in the browser fine (I used both Chrome and IE). But when I add in the Actions of the button to go to another web page and test it, the animation turns all white. I used the code snippet "Click to go to Web Page", while the button is selected.
I looked at several different sites and books and looks like I'm doing everything right. But my test shows just a white box.
In the output is the following:
WARNINGS:
Supported text is limited. It is generally recommended to include the text as HTML (see DOMElement) elements. (6)
In EaselJS frame numbers start at 0 instead of 1. For example, this STOP button and gotoAndPlay calls. (2)
Happy with the two Bitmaps and buttons can generate errors of local security in some browsers to run from the local file system.
The motion tweens are published in the form of animations frame by frame. Use Classic tweens where possible. (15)
I thought about it! I used the code snippet in the ActionScript, not HTML5 file folder. When I went there it works fine!
Tags: Adobe Animate
Similar Questions
-
Yet created the animation flash with HTML link
Having some problems with (in CS6) recently.
Use it to create a flash with the link of file HTML file.
Flash is installed and running, but when clicking on the index file I just get the black box and nothing else in the web browser.
Tried Firefox, IE and Chrome, all with the same results.
It worked well on 09/05/16 but the 15th, it had stopped working.
The play flash file directly works without any problem.
Any help or ideas would be appreciated.
I took a few minutes. An old yet to Flash projects displays the player controls and does not work. A new export shows no control and does not work.
Nothing has changed in still (it has not been updated for a long time). Flash (23.0.0.162) and I don't think that has changed. I don't remember when it worked last.
So I headed to the forum Flash and discovered that it was a new version of flash (5 days ago) which has the default value no local file access. It's a security issue. See this link for the workaround:
Flash Player 23 23 AIR release notes
All good once again!
-
Placement of the animated Flash in HTML
Whenever I have publish a movie to HTML, it always appears in the upper left corner of the browser window. I tried to change the publishing settings to try to get the film to be centered, but nothing works. I currently have the HTML publish settings as follows: model: Flash only
Dimensions: Match Movie
Alignment of HTML: default
Flash of alignment: Horizontal: Center Vertical: Center
Find the extension 'Center in the browser' in the riding of Flash from adobe.com. This will position your Flash in the Center (horizontally) of your html page, you can edit the html code to Center vertically.
-
I downloaded the creative cloud adobe but when I open it, the screen is all white.
I tried to download photoshop and fireworks, but when I opened the desktop screen is all white and white.
If you are behind a firewall corp, Creative Suite Enterprise Deployment. Adobe Developer Connection
Otherwise, rename the Opm.Db file in
Windows: "Users\ {username} \AppData\Local\Adobe\OOBE directory.
"" Mac: "~/Library/Application Support/Adobe/OOBE"
-
I have a hard time getting the animation to fit all sizes...
Thanks for the help!
You did it reactivates to animate?
-
Since last week, my laptop screen shows all the colors in its truest form ;-) in fact after work for a few minutes... the screen unexpectedly goes all white, sometimes black, purple, orange and all the colors we could recall with a shrill of an annoying buzzzzz.
I have no idea on the reason of this wild behavior from my laptop and so I ask aloud the front to get fixed up.mention the reason and repair?Hello
Maybe the hardware failure, however it could be linked as well video card driver.
Make sure you have the latest video card drivers. If you are already on the latest graphics card drivers, uninstall and install a version or a few versions behind the last to make sure this isn't a last number one driver. If you have already tried the latest version, but also the many versions previous possible, you can try a beta driver if they are available.
Kind regards
Patrick
-
InDesign flashing black and white screen
I have a new computer and I have installed InDesign out of the creative cloud and when I open the program, the screen flashes black and white and I am unable to select one of the drop down tabs menu. Photoshop and Dreamweaver work perfectly, so I'm not sure what the problem is with InDesign. Help, please!
I think I've seen reports of this problem with the new workspace of departure which is new.
If you can press Cmd - K (Mac) or Ctrl-K (Windows) to open the preferences > General > uncheck 'Show 'Start' workspace... '.
See if that helps.
-
Why "Overview" and "Export" flash to the high content of the page and then go white?
I have a page that worked well before, but now when I Export, preview or preview in the browser, the content flashes then disappears / becomes white. Inspect items shows a lot of HTML, but not content? It was really visible, but is completely gone, maybe even of the html code.
This happens in Muse, Chrome, Firefox and when exporting to HTML in any browser. With the help of Macbook Pro retina, end of 2013, with OSX 10.10.5 and Muse CC 2015.0.0.597, CL 791874
I get such errors in the console:
"webkitRequestAnimationFrame" is specific to the provider. Use instead the standard 'requestAnimationFrame '.
(2) - file:///Users/calebirie/Downloads/Muse%20Template/export2/null could not load the resource: net::ERR_FILE_NOT_FOUND
And here is an example of the HTML I see during the inspection:
< div style = "position: absolute;" Top: 0px; left: 0px; z index: 100001; display: none; ">
< div style = "position: absolute;" Top: 0px; left: 0px; ">
< div id = "u3794" style = "left: 0px;" Top: 0px; Width: auto; height: auto; padding: 0px; margin: 0px; z-index: auto; ">
< div class = "overlayWedge" >
< / div >
< / div >
< / div >
< div class = "LightboxContent" style = "position: absolute;" left: 0px; Top: 0px; ">
< div class = "SlideShowContentPanel rgba-background clearfix" style = "width: 443px;" height: 496px. position: absolute; padding: 0px; left: 0px; Top: 0px; border-width: 0px; Background: none; ">
<!--battery box-->
< div class = "clearfix grpelem wp-Panel clip_frame round SSSlide-corners" id = "u3795" style = "display: none;" position: absolute; left: 0px; Top: 0px; ">
<! - image - >
< div id = "u3795_clip" >
< div class = "clip_frame" >
"< img class ="position_content"id ="u3795_img"data-src =" images/2.jpg"src =" images/2.jpg"alt =" "data-width ="334"data-height ="445"width ="334"height ="445">
< / div >
< / div >
< / div >
< / div >
< div class = "SSCloseButton popup_element shadow-rounded corners clearfix" id = "u3800" style = "top: 459px;" left: 399px; ">
<!--Group-->
< div class = "grpelem clearfix" id = "u3801-4" >
<! - content - >
< p > x < /p >
< / div >
< / div >
< / div >
< / div >
Notice the <!-content-> x < /p > < p >? That's what most every div on my page. What you see above is essentially repeated ~ 10 times and the rest is scripts.
So, anyone have any ideas? Why I see my content for < 1 second, then * poof! *
Any help would be greatly appreciated!
Well, since I have no help here I had to force my way into Adobe Chat support and get help there. And surprisingly, the woman who helped me was great! Neha thanks!
So, to provide the answer here for posterity: it's a 3rd party widget which removed all my content. At some point the widget or Adobe updated and it broke. I will need to reach out to the preparer of widget to see if they can solve the problem. Meanwhile, deleting the widget solved the problem.
-
When I insert my file "adobe" edge oam animate in must get a rectangular white flash at the head of the animation?
Hello
I would appreciate if you could share the screenshots of the Design view and mode of preview for better understanding of the issue.
You can also create a temp BC to us URL.
Concerning
Vivek
-
The animation slides ignore content in flash published
Dear assistants and experts,
I may be new to Captivate, but have worked with all his predecessors...
My simple demonstration consists of 6 slides:
a text slide;
a slide of animation built from an AVI (123 sec);
a text slide;
a slide of animation built from an AVI (23 sec).
a text slide;
a slide of animation built from an AVI (165 s)
When the preview of all content is indicated. Then I publish (HTML export). The flash seen ignores the end of all the slides in the animation: from the beginning that 107 seconds are displayed, from the second 10 seconds, are displayed in the third only 110 seconds.
To be more precise on the previw: this is the reading on the timeline where everything is played - not 'play this Slide' button in the Preview button - that creates a temporary file to flash.
With uncompressed Flash, it's the same problem.
It was not here?I have now found the source of my problem:
There is a difference if I insert via
(1) insert > slide > animation Slide - or
(2) insert > Slide white; and then in the blank slide: Insert > AnimationCase 2, I get the "New Animation" dialog box where I can configure options. In case 1, that this dialog box does not display upward and with properties to slide the desired option not adjustable.
The option to cure the problem is "synchronize with the project.
The help text for this option "select this option to synchronize the speed at which the animation file plays with the speed of timeline. (If you find that the animation file is not playing smoothly, test with this option selected and cleared to see which setting gives you better results) ». has not triggered my brain first, because during playback (any avi) animation in the timeline, it is displayed properly with or without this option.So: If the final flash file ignores the end of imported animations (e.g. avi) and early moves to the next slide:
-Import the animation in a blank slide (do not import via Insert > Slide > animated slides)
-Set the option "Synchronize with the project" in the dialog box "new Animation.Klaus stew
-
Export SWF to have all the animation in the main timeline?
I have an animated logo (LOGO. SWF) and I have several instances of the same symbol playing outside the main storyline. I would like to export this SWF (LOGO. SWF) so that I can import it into an another FLA (BANNERAD. (FLA). But when I import now in (BANNERAD. FLA) does not have these symbols as they are not played in the main storyline of the original (LOGO. (SWF). Is there a way to export the movie (LOGO. SWF) so that you can in a sense all of the animation of the scene? Who is?
This is a flash banner ad, so I can't it be linked through ACE
The only thing I can think to think is to copy the logo file timeline in the timeline of the file bannerad.
-
Hi I'm creating animation frame by frame in photoshop.
I import photoshop files into flash using
FILE > IMPORT > IMPORT TO STAGE
I used to be able to preview or 'test line' my movie easily by clicking on:
FILE > PUBLISH PREVIEW > FLASH
I could watch the animation in a loop and see where improvements are needed. Now, flash struggles a lot with the files, takes a long time to load the preview, when that happens, it shows me maybe a third of the animation, running on empty and behaves as if all my frames are completely empty. I can't see on my main work no more later.
Anyone know what is happening? I keep restarting flash but the same problem persists.
Thanks in advance for any help or suggestion
It's more 100megs of images, then you are probably hitting a limit of flash cs5/system.
are you using a channel alpha and overlay of some of these pictures on another?
-
Flash Player white (all black or all white) on multiple sites
On a number of sites (for example: www.thedailyshow.com) Flash video area is empty, either all black or all white. Flash works on most of the other sites and all Flash ads, including on pages where the main flash video is empty. (See attached image)
It's on a Win7 HP, 64-bit using IE9 and Adobe Flash 11.1.102.55. (more details below)
This lasts for about two weeks. I did all the standard stuff:
Off to hardware acceleration, checked the box 'Use software rendering instead of GPU rendering'; persons with disabilities followed by protection; has confirmed that the Shockwave Flash add-on has been activated; temporarily the security value low. see the page in Firefox. uninstalled and reinstalled Adoble Flash; Uninstalled and installed Flash Flash 10.3. Nothing is no good. I hope someone can help. Thank you
------------------
Information System
------------------
Operating system: Windows 7 Home Premium 64 - bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.110622) - 1506
System manufacturer: Dell Inc..
System model: Inspiron 620
Processor: Intel (r) CPU of Core i3-2100 3.10 GHz (4 CPUs), ~3.1GHz
Memory: 4096 MB RAM---------------
Display devices
---------------
Card name: Intel(r) HD Graphics Family (onboard graphics)Driver version: 8.15.10.2509
Driver date: 31/08/2011Would be WHQL logo: Yes
---------------
Browser
---------------
IE9 (64 and 32 bit) Version 9.0.8112.16421
Adobe Flash 11.1.102.55.Did you go to %appdata%/adobe/ and %appdata%/macromedia/ to remove the Flash Player folder in each?
-
Animation Flash on the menu drop-down
Hi guys,.
I'm having a problem with one (as the State line) about a flash animation that covers my menu drop-down. When I remove the animation, you can see the menu... my question is, why it happened, and how to fix it?
Thanks in advance!All active content on a page will always come to the top, so to speak,
including Flash, some elements of form, Java applets and controls Active X.
This means that each one will push through the layers.For browsers IE and NN6 + there is a reliable way of solution to solve this problem
question of the use of Flash
setting wmode.Articles MM:
http://www.Macromedia.com/support/Flash/TS/documents/flash_top_layer.htm
http://www.Macromedia.com/support/Flash/TS/documents/wmode.htmKind regards
.. Trent Pastrana
www.fourlevel.com"noobie2005" wrote in message
News:e99jro$C30$1@forums. Macromedia.com...
> Hi guys,.
>
> I'm having a problem with one (as the subject line State) a flash
> animation
> which covers my menu drop-down. When I remove the animation, you can see
> the
> menu... my question is, why it happened, and how to fix it?
>
> Thanks in advance!
> -
All the time when I'm trying to connect my headset. The Adobe Flash Player plugin has crashed. I'm tired of Firefox. All the movies I have already downloaded lost. I have to restart again. I had to use other browsers such as Opera and Chrome. I'm really tired.
-> Adobe Flash plugin has crashed - avoid that it happen
Check and tell if its working.
Maybe you are looking for
-
Tecra A7: Some keys on the keyboard do not work
Hello all of a sudden the following keys on my Tecra A7 do not work: 8 9 I have o k l and the down and right arrows. The first 8 are in a straight line down. Now using a USB external keyboard, but that does not in my bag when visiting customers. Some
-
Black 700 &; Intel SSD 1 TB
Hello can I use this double-sided m.2 ssd? SSDSCKKW010X6X1 INTEL SSD 540 s series Anyone have experiences? Anyone know an alternative for a 1 TB SSD? I now 256Go and her pups. Thank you and best regards
-
HP laptop Toshiba LCD TV via HDMI connection
Sometimes, I try to connect my laptop HP G70t for my Toshiba LCD TV. I see that if I close the laptop the TV picture also disappears. What should I do to have the TV be posting video, even when the laptop is closed. Note: I should still be able to us
-
HP Photosmart C495: How do we install photosmart c4795 in Microsoft Windows Vista
I need help downloading the driver for Photosmart C4795. He says that he supports only Microsoft 7 and 8. My system is Microsoft Windows Vista 64. Thank you
-
I constantly have problems with updates. It seems to be their installation. But when it's over I get a message saying "some updates were not installed". "Error found: Code 646 Windows Update has encountered an error." Get help with this error"I click