P6 EPPM does not start after you restart Windows 7!

Similar Questions

• Application service Coldfusion 10 does not start after you restart windows 8, up

  I saw that CF10 installer now supports windows8, then I reinstalled my computer and installed coldfusion 10. After installing, everything works perfectly and smoothly CF. After restarting the computer, however, the application server service will not start. I reinstalled CF twice with the same results. Here is the error in the event viewer:

  "The 10 ColdFusion application server service stopped with the following special service error:

  The operation completed successfully. »

  whether the error in the popup you get when you try and start it:

  "Windows failed to start the server in Coldfusion 10 applications on Local computer. For more information, rreview system event log. If it is a non-Microsoft service, contact the service provider and mention the 0 service-specific error code. »

  Any help would be appreciated. I wouldn't have to reinstall completely to Win7.

  OK... Thanks Piyush!

  I looked at the file and he had:

  application. Home = C: / ColdFusion10/MenuEase

  I think it was located from when I deployed my win7 backup. I have had cases set in place and the project I was working on called MenuEase. I changed it to:

  application. Home = C: / ColdFusion10/cfusion and it works now!

  Thanks for all the help

• OnLoad does not start after you restart the device

  Hello

  is it possible that "onload" in the body section is executed when the application is actually open?

  What I've noticed is when the device is restarted and the app is started after the boot process, then I need to open the application until something works. Is this as expected?

  Is it possible to run that a hat of javascript function will be executed after the application is started after a reboot?

  Thank you.

  I think you need to add

  in your config.xml file where the file name is the file that you want are running in the background.

  More details at:

  https://bdsc.webapps.BlackBerry.com/HTML5/documentation/ww_developing/rim_background_element_1265316...

  Rory

• ASM does not start after you restart the system.

  OS = Linux 5
  Grid = 11 GR 2
  
  I've successfully installed grid for a stand-alone server. However, after I restarted the server and commissioning upward the clusterware (crsctl start has), I got the following error message when you try to start ASM
  
  sqlplus / as sysasm
  SQL > startup
  ORA-27154: post/wait create failed
  ORA-27300: OS dependent operating system: semget failed with status: 28
  ORA-27301: OS error: no space is available on the device
  ORA-27302: an error occurred at: sskgpsemsper

  kernel semaphore seems insufficient, increase last kernel.sem value in /etc/sysctl.conf and try to run to the top of the DSO.

  REF the link to follow the steps below:

  http://blog.ronnyegner-consulting.de/2011/04/11/ora-27154-postwait-create-failed-ora-27301-OS-failure-message-no-space-left-on-device-when-starting-ASM-or-database-instance/

• vCenter Server service does not start after you run Windows updates

  On a regular basis, my vCenter Server service fails to start after the automatic updates of windows are applied.  The vCenter server is a datacenter 2008R2 VM.

  The only other running applications are PerfectDisk and agents of ESET NOD32 - vCenter is in 4.1.  I tried to adjust the vCenter Server and WedAdmin service of delayed start, but that doesn't seem to make a big difference. The following errors are displayed in the case of the newspaper which lead me to think the issue is related to SQL:

  SQL Server is not ready to accept new client connections. Wait a few minutes and try again. If you have access in the error log, look for the informational message that indicates that SQL Server is ready before trying to connect again.  CUSTOMER:: 1

  The description for event ID 1000 from source VMware VirtualCenter Server can not be found. Either the component that triggers this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

  If the event is on another computer, the display information had to be saved with the event.

  The following information has been included in the event:

  Could not initialize the VMware VirtualCenter. Closing...

  the message resource is present, but the message is not in the string/message table

  Anyone encountered this before?

  Hello.

  I didn't know this, but the info in Ko 1007669 may be useful.

  Good luck!

• It does not start after you install windows 7 on an SSD without going into the bios and clicking on the reader.

  Will change the bios fix it?  If yes how?

  CharlesR salvation,

  This concern is usually caused by an incorrect configuration of the BIOS of your device settings. If you have recently installed Windows 7, then most likely the boot priority is always set to the optical drive or USB (depending on which you have used in the installation of Windows 7).

  The BIOS settings are dependent on the manufacturer of your device, this is why we invite you to contact the manufacturer of your device for assistance by changing its settings.

  Kind regards

  BIA of Hamilton

  You can use the mark as answer button, if this post responds to your request.

• The browser does not start after you have turned off and turned on the computer

  The browser does not start after you have turned off and turned on the computer. I tried to remove the program entirely (as well as personal preferences), to create a new account, install a different browser versions. All this has not helped. (I have Windows 7). Help, please! Every day I have to reinstall Firefox!

  Hello Nastena, try a clean reinstall, some Firefox issues can be resolved by performing a clean reinstall. This means that you Remove Firefox program files and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  Please report back to see if this helped you!

  • Also check if your antivirus or other access security software (firewall, antispyware etc.) blocks firefox.

  Thank you

• my touch screen does not work after you download windows 8.je have a B305 lenovo all in one PC ideas?

  my touch screen does not work after you download windows 8.je have a B305 lenovo all in one PC ideas?

  I downloaded the former driver of windows 7 touchscreen and it worked

• Help my pc does not start after you have uninstalled the video driver

  Please help my pc usually start more after I uninstall my nvidia driver mx/mx 400 with YourUninstaller I try to use this option to uninstall my driver in super mode then prompt YourUninstaller and asked "do you want to restart your computer now" then I click Yes but YourUninstaller software now on the race because the YourUninstaller has finished remove the registry left behind by uninstalling normal after that there is no register found after scanned. Then I click Next, then I closed this request. Then I restart my computer manually but blocked windows then I wait 5 or 10 minutes, but do not restart Windows. I turn off my APR, then I turn on my pc then windows does not start. I try to reformat but it's the same story that windows does not start. I try to remove the cmos battery hoping it will solve then it works. But the problem is that I insert my bootable cd, it runs automatically even I don't not press a key on the keyboard, the process to continue installing windows, it sounds I can not install my windows correctly. When he restrart the process goes again to load all the drivers everywhere why did this happen? Is there something wrong with my HARD drive once I used YourUninstaller?

  RAM of a problem with you, I guess. Remove the RAM and clean including the slot of the motherboard.

  http://www.computerhope.com/beep.htm

  If this post answers your question, click mark as answer .

• SRM does not start after you have moved the database

  We're under 4.1 SRM and moved its sql database to a new server sql (new server sql a different host name).  We moved successfully to the virtual center & Manager Update bases sql data, but after moving srm4.1 database, the srm service does not start...

  so far, I uninstalled SRM (DO NOT remove the SRM database)... After uninstalling SRM, I rebooted the server.  Then I have re-directed the SRM installation and started going through the installation of MRS... After pointing the SRM installed on the server vcenter, port 80, and pointing to an existing sql database, etc., I get a thumbnail of certificate message and a prompt on the creation of a new certificate, which i say 'yes' to... Installation continued on and arrived at the end when it says "create certificate"... then does not say "cannot install the certificate...". Database error has occurred. "At this point, the installation failed

  Any ideas on how to remove the old certificate or work around this error?

  Thank you

  I think the error message is misleading in this case and the problem is not related to the certificate.

  I still think that it is permission DB / configuration number.

  Following links may be useful:

  http://communities.VMware.com/thread/212157

  http:// http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1015883

  Michael.

• Problem with the HP Media Center M7670. UK - a - does not start after you install an update to Apple Quicktime

  I just installed the latest update to Apple Quicktime (once an update message appears on the screen). When asked if I wanted to re - start the PC now, I clicked on Yes.

  Now the computer does not start. The power led lights up, then the hard drive light blinks for a while, then nothing happens and the PC begins to beep. The beeps are repeated, with 2 short beeps and one long beep. What do the beeps mean?

  Then a CMOS clear would be the next logical step in troubleshooting.

  Here is a link to your motherboard page.

  Clearing CMOS information at the bottom of the document.

  It is usually the last step before giving up on a motherboard.

  The problem you are experiencing is hardware motherboard related firmware.

• H8 - 1280t - QC461AV #ABA: desktop HP - computer does not start after the installation (Windows 10) video card

  So, I just bought a new video card an XFX R9-390 and a new HX1200i POWER supply corsair (overkill ik ) that I put on a card mother IPIWB-PB for my 3 years old HP PC, and the new stupid video card is not working. the PC just does not start, I see is a black screen. My monitor is an HP 2311gt and I can't use my computer with the old video card no probs, BUT whenever I have to install the new card does not detect my monitor just and I only see a blank screen. I HAVE NO IDEA HOW I'M DOING. Help, please

  PS. I have RMA the new power supply and the video card and they got to check and send back to me, so I know that the two pieces of equipment are working very well AND of course I am currently using my PC with the old video card

  Wiraqocha, here is the link to start safe for HPs with Win 10 and instructions to enter the BIOS. It may be useful:

  HP PC - secure boot (Windows 10)

• After effects crashes when switching between applications (Mac) and After Effects does not start after you enable journaling

  Hey there,

  When to (for example), Illustrator and AE program seems to have a greater likelihood of crashing. I was not able to determine exactly why this is happening.

  I often copy - paste forms of AI in AE, but it is not always plant AE. It could be the speed with which I switch between programs, but I'm still not sure about this.

  In addition, it breaks the audio driver somehow and Spotify (running in the background) stops playing. Restart Spotify corrects this problem.

  AE crashes and is often frustrating. I sent Crash Reports, but so far no help.

  I just activated registration--which has also caused some AE to fail. This time when (re) launch the program. It wouldn't start, but also did not highlight as suspended in the Force Quit of OSX dialog box. She would not answer Force closes and hung my system when I tried to reboot. You had to manually restart my Mac Pro.

  Well, variable time!

  Mac Pro (end 2013) 3 GHz 8-Core

  64 GB of ram

  OS X Yosemite (10.10.2)

  After Effects CC 2014 with the latest updates

  Illustrator CC (not 2014) same with the latest updates

  He does not behave like that on my iMac at home.

  Any advice would be (very) welcome at this time.

  Huh! I should have checked the settings correctly. It is a facility relatively new compared with at home.

  Solution: Check that there is enough RAM available for other programs.

  In addition, light AICB could do the trick, too. But I suspect that the latter has a much greater effect.

• Satellite Pro A60 EN does not start after you have used the recovery CD - isapnp.sys missing or damaged

  Help am stuck with it.

  Necessary to perform a recovery on the laptop and used the recovery CD 2 they seem to work OK. No error during installation, but after that they finished and it restarts didn't get the following message.

  Windows could not start because the following file is missing or corrupt:
  System32\drivers\isapnp.sys

  You can attempt to repair this file... etc but I don't have any original installation CD all have is the recovery for the Toshiba.

  I have a setup of Windows XP for the PC disk, but when I try to run which, but it starts just the configuration. Setup is loading files and after the kernel debugger get error

  "File ntkrnlmp.exe could not be loaded.
  The error code is 4, sometimes it's 7.

  I tried to delete and recreate and formatting partitions, so I can see and I can copy a file to the C: drive

  So any suggestions as to what wrong here

  Thank you very much

  I put t know if this Microsoft Knowledge base article would be useful for you, but you should check it out.

  [You receive a "Windows didn't start because the following file is missing or corrupt: Isapnp.sys" error message at startup | http://support.microsoft.com/kb/315311]

  Microsoft has a solution, and I would like to know if you can solve this problem by following the steps of the solution described in the article.

  Feedback would be much appreciated

• My phone is lock and does not start after you install an update to Windows.

  After you have installed the Windows Vista Home Premium on my laptop, I am unable to start my laptop properly.

  Boots systems and load normally until the display of connection where instead of the login screen, I show the screen updated frozen on "Installing part 3/3 (0%) update." The laptop stays on this screen, with the cursor froze with a loading icon, for about half a minute until the screen shuts off and reboots the system, put the system in a loop, I can't on.

  I tried: turning off on and powered. using advanced boot options to open the system to all types of 'Safe Mode' and leaving the laptop for some time before trying to turn on the system again. All these things have not worked and the system remains in the lock down.

  I wonder if it is a common problem after the latest Vista updates or if it is more specific to my laptop. Whatever it is, any kind of feedback and advice would be most appreciated.

  Thank you.

  After you have installed the Windows Vista Home Premium on my laptop, I am unable to start my laptop properly.

  "part 3/3 (0%) update installation." ... and restart the system.

  See if this sugesstion can help you:- http://support.Microsoft.com/kb/949358 >