Packard Bell BV Diamond 1200 Plus Scanner

Similar Questions

• Cannot connect my packard bell scanner to my computor, please help me

  bought a new laptop and the scanner had always worked perfectly on my desk, but doesn't work with the notebook, think that I have to download something

  Maybe you should ask experts in Support of Packard Bell:

  http://www.PackardBell.com/support/

• Packard Bell M3671: New installation will not leave my upgrade or install updates

  Hello

  My mother has a Packard Bell M3871. Recently, she had a problem she turn on the computer and the date would go to 01/01/2011 and not all startup applications start as the antivirus, etc. I decided to restore the system to factory settings. Worked well. The day following the date returned in 2011 and I was not able to use internet as he said the connection is not private and it was recommended to install updates. So I waited a few hours while he was looking for updates and without success. Continues the search now and find nothing. I even tried the upgrade to windows 10 but the GET installation stuck at 99% and after a manual reboot as usual, loads of windows 7.

  Any help is much appreciated!

  Hello:

  See if these two updates of W7 installed solves the problem.

  https://support.Microsoft.com/en-us/KB/3083710

  https://support.Microsoft.com/en-us/KB/3102810

  You can also read this article for more info...

  http://www.ZDNet.com/article/sticking-with-Windows-7-the-forecast-calls-for-pain/

• Failed to get a high bandwidth of simple note of packard bell TS.

  OT: link to internet with rigid cable router. What should I do?
  I am trying to connect to a tutor on the site of the line (for English teaching) I have hard wired router (using a yellow cable) to my computer (packard bell) easy note TS, but I am unable to get enough high bandwidth because it seems not to join the hard wiring (just the wireless) (I think). I get 100.0 Mbps through the telephone line for ADSL. (I'm not very good but better than nothing.) Can you please guide me to solve this problem for me... Thank you!!

  Hi PhilippaDawes-Fox,

  1. the problem occurs only with the Guardian Online site?
  2. don't you make changes to the computer before the issue occur?
  3. what operating system is installed on the computer?

  If the problem is with all Web sites, then try the steps from the following link:

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  If the steps above fail, then I suggest you to contact your Internet service provider for high bandwidth.

• No sound on Packard Bell, SW85. Before sound

  NO SOUND on Packard Bell, SW85. Previously sound.

  Drivers disabled & deleted once I had problems all the sounds.
  Re-installed sound, BUT still NO SOUND options.
  
  * original title - "WindowsUpdate_800F0203" "WindowsUpdate_dt000."
  .
   

  Hello

  1. what operating system do you use?

  2 did you receive an error message?

  3. have you made changes on your computer?

  Method 1:

  I suggest you to follow the links and check out them.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  If you use windows7 see the link. Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  Method 2:

  I also suggest you to follow the link and check.

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  I also suggest you to contact packardbell support center and check.

  http://IL.PackardBell.com/PB/en/IL/content/support

• I have a Packard Bell computer laptop, installed speedypc and scanned but pc still keeps freezing

  Oh my? is my title lol

  * original title - Hi got packard bell laptop computer, installed speedypc and scanned but pc still keeps freezing - silly instrucs pse - thx * need help of pse - no new download installed and has had this prob for a few days.

  Hello nettynooross,

  Here attached a link where other users have had this problem.  There are several steps to try.  I hope this helps out.

  Microsoft Answers:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/my-computer-freezes-randomly-and-is-doing-it-more/21b36130-50c8-41d2-B82C-5655f32a7831

  Thank you

• HOW TO INSTALL A WIRELESS PRINTER MODEL HP OFFICEJET 6700 PREMIUM ON PACKARD BELL LAPTOP

  I have NEED to INSTALL MY HP OFFICEJET PRINTER 6700 PREMIUM without THREAD AS I ONLY HAVE A HEWLETT PACKARD computer LAPTOP so CAN NOT PUT IN THE DISK PROVIDED.

  I assume you mean that you have a Packard Bell netbook which doesn't have a CD player.

  You can download the necessary software on the Internet and install it without the CD.  The location of base for your printer is here--> http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lc=en&os=228&product=5058338&sw_lang=&

  Most netbooks come with Windows 7 Starter, so for a better response, please indicate the model of your computer and the version of Windows you have installed (right click on desktop and select properties for this information).

  You have a wireless router? If so, what is its brand & model?
  The printer came with a USB cable (even if in the end, you want to print wireless)?

• Packard Bell m/c will now fire up to the "home page" - MS system is Windows XP

  Windows xp now will not pull upward on the old Packard Bell computer, then the screen falls in "sleep" mode I have the original Windows XP disks, but does not help. Can I make a record of 'boot' via the net using my second computer?

  Here are the instructions to burn a cd for the disk to boot Hiren that you can then run checkdisk, a memory test and other tools

  Courtesy of Jose Ibarra

  Do you have a Hiren Boot CD, which you can download here:
  
  http://www.hirensbootcd.org/download/

  The ZIP file is large, so the download will take probably a little while to complete the bit it is worth.  Then unzip the download to extract the Hirens.BootCD.ISO file that will be used to create your new bootable CD.

  Create a bootable CD. ISO file is not the same as simply copying the. File ISO onto a blank CD.  You must use software that includes how to burn a. ISO to a CD to create a bootable CD.

  In the file Hiren ZIP are the file BurnToCD.cmd that you can double-click to start, but I've never used and prefer to use ImgBurn.

  If you need a simple and CD burning, this is a free software popular software:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install anything from UniBlue or the Ask Toolbar (never install the ASK toolbar for nothing).

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your new bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.

  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When starting on the Hiren's CD, you will see a menu of options.  Choose Mini XP.  It will appear while Windows is loading and you will be presented with a desktop computer that has the look and feel of the interface of Windows Explorer, you are already accustomed to using.

  A way to check the drive for errors is to open my computer and right-click on your afflicted player and choose Properties, tools, error, check checking now... put a check mark in the boxes and then start.

  Sometimes that works, then you can also click on start, run and in the type box:

  cmd

  Click OK to open a command prompt window and enter the following command (assuming that XP is installed on your C drive)

  CHKDSK c: /r

  This disk check can last a long time (perhaps several to several hours) depending on the size of the volume, the amount of data on the volume and what the disk check finds to do.

  Let chkdsk finish to correct the problems, he could find.

  According to the speed of your system, the size of the volume, the amount of data on the volume and what chkdsk finds to do, he may take a long time for chkdsk with error correction to complete (several hours) or it may seem to be 'stuck '.  Be patient.  If the HARD drive led blinks always, chkdsk is something to not interrupt him.  It finally end one way or the other.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You may need to run Chkdsk c:/r more than once.

• I bought an acer laptop travelmate 4500its running on packard bell windows vista but the key to produce on ifor machine windows xp pro, what do I do as the activation key is to say its not authentic

  Windows vista laptop, but the activation code on the bottom is for windows xp pro, what I can do

  You have an Acer laptop, Packard Bell Windows Vista computer running?

  Packard Bell OEM Windows can only be used on machines from Packard Bell.

  If the label says XP, then the machine was initially delivered with XP,

  and the one who sold you the machine will rip you off with an illegal copy of Vista.

  If you can, get your money back.

  If not, you will have either to reinstall XP, or get a legitimate copy of something more recent.

• Loss of volume in the packard bell note

  Original title: ive a packard bell note and somehow lost my volumn absolutely nothing in accessories or property?

  My question as above hope someone out there can help and advise me, it has been installed do not know what I did?

  Hello

  I understand that you have lost volume on Packard Bell note. I understand the inconvenience.

  Did you of recent changes to the computer before the show?

  I suggest to refer to the following article and follow the steps suggested by Stephanie S.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-desktop/i-lost-my-volume-and-my-volume-icon-how-can-i/49d25886-e45a-4fb8-A883-1e30e9223934

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

  Concerning

• Packard Bell EasyNote ENTG71BM Ram Upgrade

  Hello.

  I got a new packard bell easyNote laptop computer ENTG71BM. This one has 2 GB of ram and windows 8.1 so ram is not enough. Can I remove the backcase and install another 2 GB of ram? Is an empty slot available?

  First remove your image (full S/N and SNID said).

  PB ENTG71BM (8.1 - 64 bit Windows) has the same mothers like the Acer Aspire ES1-512.

  Your laptop supports up to 8 GB - DDR3L - 1600 MHz (1x8Gb).

  1 - the bars of origin are:

• Activation of Windows XP on Packard Bell after clean install

  I do a clean Windows XP Home edition installation, so that a computer can be sold on.  I installed windws disc OEM (Packard Bell), but when I try to activate windows activation fails despite the use of the serial key on the OEM sticker that is on the side of the PC.  I checked the counterfeit site and everything seems to be OK and especially the Council.  How can I solve this?  Usually, the PC was working fine before the re install and the only change was a 1 GB 512 MB memory upgrade, any help would be appreciated.

  The operating system installed is not Pro - home. (ignore my previous post, if you got a notification)

  You need to reinstall with XP Home media.

• The WLAN Driver problem with Packard Bell igo laptop

  I have an old laptop Packard Bell IGO which I did a reinstall with XP Pro all what went well had no problem but now I am unable to find WLAN driverfor this model

  I tried to Packard Bell, but they seem not to have my model.  I hope someone can help me please with this please.
  Here are the details of the laptop
  Packard Bell igo
  Model: MIT - WEA01
  Mobile AMD Athelon (tm)
  1900 + processor
  clocked at 1.6 ghz
  352 RAM
  Thank you understand helps
  Gerry

  Oddly enough, the site I linked to more early does not include a driver for a wireless adapter.

  Although it is usually better to get the drivers from the manufacturer of the computer (especially for laptops) from other sources, if you cannot obtain a driver from the manufacturer of the computer, the next best source is the manufacturer of the device or of the less the manufacturer of the chip used in the device.

  Go back to the Device Manager or msinfo32 and get the make and model of your wireless adapter.  For a more accurate identification, get the 'Device ID of Instance' (msinfo32 called cela the "PNP device ID").  It is a string of letters and numbers beginning with PCI.  You need only the first part of this string, for example:

  PCI\VEN_8086 & DEV_2449

  You can then search the information here http://www.pcidatabase.com/ -->

  I found a British site that offers to sell a collection of drivers for the Packard Bell iGO 2000 series--> http://www.user-guides.co.uk/cddownload/Packard/PackardBell/Packard-Bell-iGo-2000-XP-Driver-CD-Recovery-Restore-Disk-419868.html

  You can buy this collection (which may include other drivers you need) or you can confirm the information located on this site that says that your computer has a "Intel Calexico2 (PRO Wireless 2200BG)" with PCI Device ID start wireless adapter PCI VEN_8086 & DEV_4220 (Web site displays the full PCI device ID if you want to compare that indicates your computer).

  If this identification is correct for your computer, you can download (free) the driver for this device directly from Intel--> http://www.intel.com/p/en_US/support/highlights/wireless/pro2200bg/ (you can consider running one of the Intel/tools identification also device driver on this web page).

• Packard Bell Easy Note back to factory settings

  I want to return my Packard Bell Easy Note A to the factory setting. No idea how to do that?

  1. Make a backup of personal data, as the recovery process will delete all your files, such as email and photos.
  2. Turn on your computer. When Packard Bell logo is displayed, press in and hold the ALT key while pressing the F10 key several times. Release the keys when a message that Windows is loading files.
  3. After the system recovery program has loaded follow the instructions to reinstall the operating system.
  4. In case recovery software does not start, you need to use Recovery DVD or CD; Please visit our basis of knowledge article recovery using CDs or DVDs.

• Need drivers for graphics card for a Packard Bell iMedia 5070

  Hello!

  I have a "Packard Bell iMedia 5070 desktop PC", unfortunately I have more preinstalled graphics card drivers. Is there someone who could direct me to a place where I can download them? They are not on the main site of Packard Bell.

  Thanks in advance!

  Hello

  Here are the links to the graphics card that can be installed on your computer. Access links and run the driver search tool, which is the driver to be installed on the computer automatically.

  Intel: http://downloadcenter.intel.com/

  NVIDIA Driver Downloads: http://www.nvidia.com/Download/index.aspx?lang=en-us

  AMD Support & drivers: http://support.amd.com/us/Pages/AMDSupportHub.aspx