Page master detail problems

Similar Questions

• Filtering Page master/detail with a menu drop-down

  Hey there!

  I'm going to build a Web site where I have the list of some products on a master page and can be clicked to go into details.

  I do it through the Insert > data objects > page master detail and it works very well...

  but I can't filter the results of the master page with a menu drop-down.

  Can anyone help? I'm in a bit of desperation ;-)

  Thank you

  Jaume

  Yes, this is what happens - you will be variable on the page of search results page. The variable name is what you called the drop, as MyDropDown. The value is what is the value of the selected item. So, now on the results page, create your recordset. As we use only a variable as a filter, use the simple mode. Working up and down in the dialogue window, name the Recordset, select the connection and the table.  Below, yo have four entries/selections to make. Select the database column that is filtered, in the other, select '='. Below on the left select "Variable form". The text box to the right of that will be pre populated with the name of the column. Replace it with the variable name, the name of the drop-down list on the page of research - such as "MyDropDown", without the quotes, or anything else. Click Test and you will be presented with a window asking for a value - enter any value that is contained in the menu drop down and ensure that the recordset object gives results and only records with that value. If it works, save it and're you good to go. If this isn't the case, then we will do some troubleshooting.

• Problem of page master details

  Hi all

  I have problem with the Master details page:

  If I change the catID after the connection to other ID to another user his show me the content? How can I restrict the user to see he's happy?

  Please your help as soon as POSSIBLE.

  Thank you and best regards,

  FAIZ ALI

  He solved

  That's what I did:

  
  

  <>

  Dim WebsiteName

  WebsiteName_cmd Dim

  WebsiteName_numRows Dim

  Set WebsiteName_cmd = Server.CreateObject ("ADODB.Command")

  WebsiteName_cmd. ActiveConnection = MM_mybag_STRING

  WebsiteName_cmd.CommandText = "SELECT * FROM WebName WHERE WebGroupID =?" and UserID =? ORDER BY WebNamID DESC '.

  WebsiteName_cmd. Prepared = true

  WebsiteName_cmd. Parameters.Append WebsiteName_cmd. CreateParameter ("param1", 5, 1, -1, WebsiteName__MMColParam1) ' adDouble

  WebsiteName_cmd. Parameters.Append WebsiteName_cmd. CreateParameter ("param2", 5, 1, -1, WebsiteName__MMColParam) ' adDouble

  Set WebsiteName = WebsiteName_cmd. Run

  WebsiteName_numRows = 0

  %>

  Thank you

• All pages master detail question

  I hope I'm in the right forum.  Apologies if this doesn't fall in that category.

  
  

  I previously created master page has details.  Theyr'e actuallly pretty simple.

  
  

  More recent experience.  Master page is good.  I think so.

  
  

  Problem is with the details of the page does not display do not fields, I selected.  What appears instead is a very brief message:

  
  

  Unknown column 'MESSAGE' in ' where clause'

  
  

  The MESSAGE is part of a code for a piece of jewelry.  The complete code for this project is JGER-IC00330. JPG.

  
  

  I compared the previous series of pages of fully functional master details with the news that I am creating.  Against the codes, compared to what appears in the links & signs of server behavior.  Also compared MySQL tables in the database.  It is the same database, but different tables.

  
  

  I'm clearly missing something.  To this day, I remain puzzled.

  
  

  Anyone experienced this?

  Thanks for reporting!

  I m replied that as supposed marker.

• Page master/detail with update function

  Hi people, I hope that someone can help me with this problem.
  I am writing a site in ASP for a club with a large number. Part of the private side is to select a member and update his info. The procedure is broken down because end users aren't all that sophisticated computer and need step by step instructions.
  (1) text box for a search where they enter a family name.
  (2) search brings back a list of all w / that name (Master Page)
  (3) details of the page * ideally * should be the updated page, but this was not the case. (Hold it to however.) So, I left the single detail page and linked to a separate update page w / the same variable, passed through.
  (4) the update page w / the correct record, but when the Send button is hit, I get the following error message:
  Microsoft OLE DB provider for ODBC error '80040e14' drivers
  
  [Microsoft] [ODBC Microsoft Access driver] Syntax error in UPDATE statement.
  
  etcetcetcetc.asp, line 111
  I use the DW8 Wizard to create update code (all code, really) and I have * ever * experience this problem and I'm using DW since Version 2!
  
  Any ideas? Best is to have details of the page to be also updated page, but when I tried, I got details page in a table and a form of update separated with the wrong record.
  
  Help?

  
  I have it!
  The problem of all was along as I had not applied the update to version 8.0.2. Once I did, the code generating worked exactly as it was supposed at the beginning - no additional pages to pass variables, etc.

  Thanks to all for research.

• Master detail problem

  Scenario is,

  I have a form master detail. using DBSequence on the two keys on the master and detail. But I am facing problem Parent key not found do not where to insert data. I think that Seqnce with master detail creating problem

  J Dev Version: 11.1.2.0.0

  Consult the:

  http://Ahmed-alzamer.blogspot.com/2013/09/entities-Association-not-composition.html

  Liu Wuhua technology and learning of Notes: insert master / detail in ADF BC

  http://docs.Oracle.com/CD/E23943_01/Web.1111/b31974/bcadveo.htm#ADFFD1149

• How to disable dynamically interactive report filed in the page master detail

  I use APEX 4.0 & very new to APEX. I am not able to disable a class in area of detail (which is an interactive report) of a master detail Page.
  I want to turn off the field in a row based on the value of another field of recording, like set_item_instance_property of the oracle forms. Please help me.

  See {message identifier: = 10743324}

• Join page master detail

  I am trying to create a master - master - detail page in PHP environment that uses the Assembly between two tables in the same db MySQL.
  
  The first page (chessmenu.php - chessmenu of the recordset object) displays a list of the types of the Exchequer in a MySQL table called chessmenu in the db of chess:
  The 3 areas are: itemID (auto_increment), itemName (IE. Marble) and itemType (M)
  (NOTE: in this test, there are 3 rows, marble, glass and theme - itemType is my field joining, M, G, and T respectively - which are all unique)
  
  I want this first page a link to the next page and send the URL = chessboards.php parameter? recordID = <? PHP echo $row_chessmenu ["itemType"];? >
  
  I created the second page (chessboards.php - chessboards recordset) and let the FILTER in the recordset as follows:
  itemType = recordID URL parameter
  
  When I run the first page, displays items appropriate, however, when I click on one of these elements (i.e. marble (M)) it does not display anything on the second page. I ran the TEST query on the second page in the recordset of filtering, and when I enter M, it displays the correct records (2 in total).
  
  They would then select the type of Exchequer of marble of the second page, which would then send them to the details page (3 pages total, so my comment about master, master, detail)
  
  What I am doing wrong? I send the incorrect URL parameter? Any help would be appreciated. I thought I was following the instructions in the TUTORIAL on this site:
  "If the recordsets is different, make sure the recordset on the detail page contains at least one column in common with the recordset on the master page." The common column is usually the record ID, column, but it can also be the join field from related tables. »
  
  BTW - the two fields of ItemType in the two Tables are the same (CHAR (1))
  Thank you
  
  Steve

  UPDATE: I figured out how to do this. Sorry for the useless posting.

  ANSWER: The above worked as is (I forgot to update the front page during the test after some change). To display correctly in the second page, however, DO NOT drag the fields as you would for a detail of the page. As always, the second page is a master page, create a dynamic table instead (this will allow you to have several lines instead of the method). The URL parameter will send the appropriate information to the dynamic table as well.

  See you soon.

• Navigate a page master detail editing a page using detail rowKey

  Hi all
  
  I use JDev 11.1.1.0.1.
  
  A few cases test using HR schema:
  I have 2 pages countryLocation.jspx and departements.jspx with a control flow "deptFlow" between them.
  countryLocation.jspx is a master/detail page using country as a form of master and places like detail Table.
  Locations table is surrounded by an af:panelCollection. In the pane toolbar, there is an af:toolbarButton with "deptFlow" as an action. Button using 'table1:locationId' as partialTrigger.
  The departments.jspx page is also a master-detail with sites as a form of Master and departments as an array of detail.
  I do not support pods in the pages (should I?).
  When I click the button change, I want to see all the departments of the location I have selected table of localities in the countryLocation.jspx page.
  Unfortunately, this isn't the behavior.
  If I choose 'US' as a country and LocationId 1700 (Seattle) when I click on the button, it goes to departments.jspx Edit, but it shows LoactionId = 1000 (Rome - Italy).
  What Miss me?
  
  Thanks in advance.
  Paulo Domingues

  What technology do you use for the Service of the company (in the template)? ADF business components?
  If it's BC of the ADF, what type of departments use VO were based on the departments.jspx? It is a child of the locations, or is it a use of high level in the Application Module data model?

• Problem with page validation APEX_APPLICATion master detail.  Help!

  I'm having a problem with the Apex_Application.g_fxx data structure.  I'm trying to validate the lines in my page master detail and need to use apex_application.g_f10 as the name of the variable inside the HTML data source electricity.  The name of the item I need is "f10" because it matches the database column "status" on my page.  I'm trying to validate that all the detail items have the same status, or an error is reported.  I use the following PL/SQL block that returns a Boolean value:

  < code >

  declare
  l_first_value varchar2 (4000);
  Start

  -f10 = column PO_STATUS of PO_DETAILS table on a part as a table on the page.

  l_first_value: = apex_application.g_f10 (1);
  because me in 2... apex_application.g_f10. COUNTY
  loop
  If l_first_value! = apex_application.g_f10 (i)
  then
  Returns false;
  end if;
  end loop;
  Returns true;
  end;

  
  < code >

  The HTML data that I is not intended to "f10" are the following:

  < code >

  < td headers= "Status" class= "t20data" >

  < label for= "f10_0000" class= "hideMeButHearMe" >status< /label>

  < Select name="f10"  id="f10_0000">

  < option value= "" selected= "selected" >make a selection< /option> ""

  < option value= 'APPROVED' >APPROVED< /option>

  < option valeur= « FERMÉ » >FERMÉ< /option>

  </ Select >

  < entry type="hidden" name="f02" value=""  id="f02_0000" />

  < entry type="hidden" name="f03" value="30427" id="f03_0000" />

  < entry type= 'hidden' id= "fcs_0000" name= "fcs" value= "2158A9B101842608F4CA966C0BC1433D" >

  < entry type="hidden" id="frowid_0000" name="frowid" value="" />

  < entry type="hidden" id="fcud_0000" name="fcud" value="D" />

  </ td >

  
  

  < code >
  

  So I do not know why there could be a problem when used to work before this validation.  The PL/SQL block takes the first line of F10 data and compare it to successive lines.  If the data is not equal, then an error occurs and the user is prompted to adjust the data.

  It doesn't work anymore, although I checked and the status are still of points in F10.

  I left mouth gaping.  I do not use an official page master detail previously.  I used two separate front pages: one for the header and one for show master detail.  I've updated the page for the treatment of the more fluid user. I think that even if the data structure would be the same, but maybe I'm wrong.

  Any ideas?

  
  Thank you!

  Thank you to reproduce the problem so overall. Note that if you will share your workspace in this way you need to change your username to something else than a direct email address and don't use not the actual data for your test cases. Create a guest account to developer without administrator privileges to work space for the members of the forum to use.

  Validation in this app is coded to use a different picture of the description in this thread. Above, you have identified the point like g_f10 dashboard, but the validation code is using g_f09:

  declare
    l_first_value  varchar2(4000);
  begin
  -- f09 = PO_STATUS column of PO_DETAILS table
    l_first_value := apex_application.g_f09(1);
    for i in 2 .. apex_application.g_f09.COUNT
    loop
      if l_first_value != apex_application.g_f09(i)
      then
          return false;
      end if;
    end loop;
    return true;
  end;
  

  Therefore (thanks to instrumentation code added), the validation is running by using the values of the previous column, which was be the one that I have changed according to your instructions:

  0.09114	0,00018	... Posting type "Status check IN." -: FUNC_BODY_RETURNING_BOOLEAN	4	0%
  0.09132	0,00049	... Run the statement: select count (*) in the sys.dual where exists (Select 1 from PO_DETAILS where PO_ID =: P230_PO_ID)	4	0 g
  0.09181	0,00015	...... Result = true	4	0%
  0.09196	0.00573

  ... Run the statement: declare function x return boolean is begin declare

  l_first_value varchar2 (4000);

  Start

  -f09 = PO_STATUS table PO_DETAILS column

  l_first_value: = apex_application.g_f09 (1);

  apex_debug.message ('g_f09 (1): %s, l_first_value);

  because me in 2... apex_application.g_f09. COUNTY

  loop

  (apex_debug.message('g_f09(%s): %s, i, apex_application.g_f09 (i));

  If l_first_value! = apex_application.g_f09 (i)

  then

  Returns false;

  end if;

  end loop;

  Returns true;

  end;

  Returns a null value. end; begin wwv_flow.g_boolean: = x; end;

  4

  28%

  0.09769

  0.00005

  g_f09 (1): TEST2

  4

  0%

  0.09773

  0.00010

  g_f09 (2): TEST

  4

  0%

  0.09783

  0,00003

  ...... Result = false

  4

  0%

  0.09786

  0.00004

  ...... Does NOT pass

  I created a new liquidation which uses the correct column, but at some point the validation passes and data, so I didn't get a chance to conduct tests.

• tree and master detail on same page oracle apex

  Hello.

  How can I create a form in the apex that contains a tree view and a master in detail on the same page?

  I already finished the tree, but when I finished the master Wizard detail, apex automatically creates a new page.

  any ideas?

  I use apex 4.2

  Thanks in advance.

  Siberia wrote:

  Hello.

  How can I create a form in the apex that contains a tree view and a master in detail on the same page?

  I already finished the tree, but when I finished the master Wizard detail, apex automatically creates a new page.

  any ideas?

  I use apex 4.2

  Thanks in advance.

  Backtrack. First create a form page master detail. On this form Page then create the tree. So the shape and the tree will be on the same page.

  BR,

  Patrick

• Updating of the master/detail does not work after the failure of the validation

  After validation of the judgment of the further processing of a page page page master detail, I get the error message Oracle depending on the display of the detail portion:

  < code >

  ORA: 01445: cannot select ROWID, or sample, a view of join without key preserved table.

  ORA-06510-PL/SQL unhandled exception defined by the user.

  < code >

  
  

  Clues as to why this might happen?  The master of the page displays fine as well as the validation error message personalized appropriate. It's just part of detail (from SQL-based report) that is causing the problem.  I use either a ROWID.

  
  

  Thank you!
  

  Just an info for all those who may have this same problem in the future.  I corrected the error and it had nothing to do with the ROWID or views or something like that.  Under the section of Page rendering when you set the definition of the region in the source section, I included the "order by" clause in my SQL statement.  This was the cause of my ORA-01445 error!  When I removed the clause of the definition of the source, and instead included in the attributes report by checking the box of the appropriate column sorting (which allows the apex generate so for me), the error has disappeared!  The error message Oracle NEVER would have given me a clue to what caused the error.  I joined just thinking 'what if I take the order by clause.  What's a flukey fix!

• Failed to add new detail in the form of master detail record

  Hello
  
  I created a simple database application from scratch by selecting the start a page master detail. This has generated a report (for the parent) and a page of form (for the child). On using the form to add a new record to the child, the following error is generated:
  
  Internal error in the routine mru: ORA-20001: error in MRU: line = 1, ORA-01400: cannot insert NULL into ("Student" 1.) "" DELEGATE. " "" ""DELEGATE_ID"), insert"Student"1." DELEGATE values' ('DELEGATE_ID', 'CLIENT_ID', 'NAME', 'INITIAL', 'SEX', "SPECIAL_NEEDS") (: b1,: b2,: b3: b4,: b5,: b6)
  Error failed to process the update.
  
  The field 'child' in the error message is automatically hidden on the form and I guess on the generation of this form using the wizard I would have had the opportunity to link the field delegate_id to a trigger or a sequence like this seems to happen when you create a scratch from application database using other types of page. I'm new to Apex then I would be grateful if someone could let me know why this default behavior occurs.
  
  Kind regards
  
  Kevin.

  I tried for Apex 4.0.2 (my version) and 4.1 (on apex.oracle.com) and I'm wondering for the production of main PK and details in both versions.

  What are your steps exactly in the wizard? Like this?
  Create page-> form-> form detailed Master
  Now you see a list of steps sub whose "Source of primary key.

  Oh I see "Create an Application Assistant." in your message. Start with an empty application (blank page) and use the wizard to create a Page. Maybe it's the difference.

  Published by: InoL on November 18, 2011 09:27

• MASTER DETAIL - SET THE DEFAULT VALUES FOR ELEMENTS

  I have a page master detail where, on the master, I do things like update the fields entered_by and entered_date
  by applying functions to define item-level details and the read-only setting.
  
  On the portion of the page detail, I would do the same thing, but I don't see the point of page details - only master items.
  The portion of details is for comments so I wish I had the commenter_name and commenter_date the value of the values
  When I hit the Add button line on the portion of details.
  
  Where are the elements of detail?
  
  I use APEX 3.2
  
  Thank you
  
  Steve

  Hello

  When you use the master detail form, APEX build "Detail part" in the report. So if you edit the page, you won't see actual items for 'Party detail'

  If you want to set default values or want to format these items, you may need to perform like this

  1 > edit 'report' of the "retail portion.
  2 > click on attributes report
  3 > click on the column, you want to set default values
  4 > now here, in accordance with article 'Tabular form Element' you can do this by setting appropriate in 'default' type fields and "default".

  It may be useful

  See you soon
  Hari

• The master/detail Page scroll, Incorrect rendering position

  I think that it is something simple that I am on and I hope that someone will be able to indicate what it is.

  I have a Setup master/detail, how they were created in the packed app go live Checklist for projects (see page 200) mirroring.

  • This means that my page template is a type of master/detail with a classic/region report selector in the master detail region. The classic report is set to not show in the region selector.

  Under it, I have several regions, each game to be included in the region selector.

  UPDATE: My first region on the page has several components display only in it. If I do not show this region then the problem of scrolling stops.

  My problem is when I insert in the page that the page is automatically past the master section, scroll up to the region selector. However I can scroll to top knowledge my master.

  Anyone have an idea what might cause this behavior?

  Hamster wheel engineer wrote:

  I think that it is something simple that I am on and I hope that someone will be able to indicate what it is.

  I have a Setup master/detail, how they were created in the packed app go live Checklist for projects (see page 200) mirroring.

  • This means that my page template is a type of master/detail with a classic/region report selector in the master detail region. The classic report is set to not show in the region selector.

  Under it, I have several regions, each game to be included in the region selector.

  UPDATE: My first region on the page has several components display only in it. If I do not show this region then the problem of scrolling stops.

  My problem is when I insert in the page that the page is automatically past the master section, scroll up to the region selector. However I can scroll to top knowledge my master.

  Anyone have an idea what might cause this behavior?

  The Cursor Focus of page property is set to the first item on the page? If so, change it to don't focus cursor.