Page master vs content different heights

Similar Questions

• Problems with the page master Muse appearing differently

  I use a master page to create a header/footer consistent throughout my site.  It looks like a lot when I saw in the browser, however when published gets wildly distorted/changed... Except on one of the pages.  On one of the Web pages, it appears exactly as it did in the preview.  I checked everything I can think and have run out of ideas.  See the screenshots below, I'm sure you can guess which is the wrong version

  

  

  Perhaps you have been broadcast on a bug that will be fixed in the version of fix to come.

  If it is this bug, it is a temporary workaround by going in "Site Properties / Advanced" and cut the option 'enable editing InBrowser'.

• Master of different heights to match the corresponding page?

  In my site, I have several pages with different heights. Should I create a lot of masters with different heights to match the corresponding page?

  Hello

  You have one create one page of Mater.

  As you add content to pages, the foot moves downwards and will increase the height of the page. So it is not necessary to create multiple master pages.

  Kind regards

  Sachin

• Problem creating PDF (different page size or content Cup)

  Hi all, I have a random problem when I save the PDF to illustrator (CS6 o CC, the same): if I open a PDF in illustrator is to correct both the size of the page that the content. If I open it in Acrobat I see different page size or cut content, anyone know how I can solve it? Thank you!!! Viewing acrobat

  Illustrator visualizatin

  Check your PDF options and relevant options in Acrobat for which various bounding boxes you actually use to display the page of cultures.

  Mylenium

• Affecting elements of Page Master unique any spread

  Another day, another little problem.

  I'm on the latest Indesign, 2015.4. I'm working on a file that is an update a for a year, so I've been using a previous version of Indesign, then held well.

  Basically, I have a document divided into sections. Each section has a distinctive colour that extends from the external purge exactly at the edge of the page in the gutter, sure it overlaps on the next page.

  Here are the settings in master pages.

  But I need to change their height on a page by page basis, if I click to get around. However, when I do that, Indesign jumps into a new element behind. I noticed that this does not happen if the items do not extend to the edge of the gutter. So as a solution, I stopped being the width color bars full page.

  Example:

  Here is my purple section with the applied master page:

  

  Here I clicked to replace this purple bar and drag it to the right height. But Indesign has added a new green bar, because the master page applied to the page on the right in this spread, which is the beginning of the Green section of the document:

  

  My work around is this page master points cannot run on the edge of the gutter. I always substitute as before, but in height and width. But Indesign doesn't add them to the nearby page more:

  

  I think you might have misunderstood me. Half a mm is only on master pages. Simply stop the glitch to occur on pages that have a master applied. I then override it on every page and let it slide to the edge once he became a page element, thus fully bridge the gap.

  If the gap at the edge of the master page is not enough, the problem occurs.

• Conflicting style sheets in HTML Page Master?

  Hey all, got an interesting case here. My apologies to read for a long time.

  I worked with a web developer here at my company to create a nice little script for a feedback tab that appears on each topic. Click, opens upward to was this useful > Yes or No. Clicks of the user, and the server sends the results. Works very well end front and back.  However, there are some funny behaviors on the side of the project.

  The part of the code is below (these are the last three lines; I have bolded the line in question)

  " < script src =" http://AJAX.googleapis.com/AJAX/libs/jQuery/2.2.4/jQuery.min.js "> < / script > .

  "" < script src = "... /guidefeedback/feedback.js?v1.0" type = "text/javascript" > < / script >

  "< link href ="... / guidefeedback/feedback. CSS? V1.0"rel ="stylesheet"type =" text/css">

  When I let down all of the code in the bottom of the Page Master (in HTML mode of course), RoboHelp accepts, acknowledges the scripts, etc., but it automatically moves the bold line to the header, directly under the line of code to the Master Page by default CSS:

  < link rel = "StyleSheet" href = "Millennium_OnlineBooking.css" type = "text/css" / > "

  "< link href ="... / guidefeedback/feedback. CSS? V1.0"rel ="stylesheet"type =" text/css"/ >

  < / head >

  Now if I just leave it alone, regenerate and place the output on the server, everything works fine. But if I do a minor change to the Master Page, either in HTML or Design discover... and save, it sweeps away the default CSS that applies to all topics. The code in the HTML of the Page master remains the same, the CSS default remains the same, but if I look at individual topics Properties > appearance, the CSS was missed against zero. If I delete this line of code "BOLD", I can make changes to the Master Page to the content of my heart with any strange behavior or change of stylesheet to themes. This line is certainly confound HR somehow.

  I know a simple solution is to simply pull the top of the topic list and reapply the CSS wanted to all subjects, and I know that I will rarely change a Master Page as soon as I understand how I like it, but I can't help but think that we are missing a fundamental tweak that will allow HR to manage two CSS.

  Does anyone know what I'm missing here?

  Thanks in advance!

  Joe C.

  You can add multiple CSS files to a topic in RoboHelp, but it does not include the RoboHelp dialog box. Nothing to do about it. I also tried to use the @import rules, but HR doesn't like either. I the end I merged al my files into one. This works as expected.

• PDF content differs from the content of the framework

  Using FrameMaker 12.0.3.424

  Have a page with the content of the text (formatting as a numbered list). In the framework document, the last item in the list on this page is #6, # 7 appearing at the top of the next page. The PDF, however, has #7 on the bottom of this page and #8 at the top of the following.

  While this may seem like a strange curiosity that doesn't really matter, I have a Master Page rotated in the same file that formats incorrectly because of this (the page wrong turns).

  Someone at - it ideas?

  Update: I just saved in PDF with the screen on the pages in question: as soon as distilling began to run, #7 article moved to the bottom of the previous page, then moved after the PDF has been created! With item #7, beginning at the top of a page with a Page break prevented him from moving. But why is happening!

  What is the system default printer in the session of FM? If it's not the AdobePDF printer instance, then FM has share printers over the SaveAsPDF operation and this can cause a re-flow due to differences in the settings of the printer (and perhaps fonts). There is a third-party utility (freebie) automatically sets the AdobePDF as default printer for the session of FM and then switches back on your system by default. See utility SetPrint of Sundorne to: http://www.sundorne.com/FrameMaker/Freeware/setPrint.htm

  There is also a 12.0.4 patch for FM that you should update.

• Why my Page master is crushing my CSS styles?

  I just upgraded my TCS of the 2015 release 4.0. In the process of updating my team models, I discovered a problem that I have not met before.

  We have a custom CSS. We have our FM HR manuals and custom CSS helps keep our subjects a single source set shaped like we like them. When you apply the CSS custom HR, everything looks and works like a charm.

  We also have a custom master page that inserts a header bar and the bar footer on each page. I went into the properties of the file of the Page Master and applied the CSS custom to that Master Page.

  However, when I apply the Master Page in the list of topics, the format of the body looks different, he has just the CSS has been applied (when no Master Page is applied). I've included two screenshots - an are only applied CSS and the other with the Master Page.

  I tried to apply two CSS and the Master Page by the general and the appearance of the Properties dialog box tabs, but I always get the same question. I also checked the HTML view and the correct CSS file is linked in the head.

  Why these two things are not talking to each other?

  

  Hi Sarah,.

  I looked at the project and found that the problem comes from the binding process. The topics generated using 2 CSS files: the inforeliance one and the other for the FrameMaker file with styles not mapped. Assign master page removes this second CSS file while the inforeliance THAT CSS is used.

  In my view, that the solution is to improve the mapping of files in the file CSS inforeliance FM. If all your styles of FM are mapped, there will be no more difference. I hope Jeff can verify this.

• The value "allow Page Break in content" during the execution

  Hello

  Some can help me setting the subform/table property "Allow Page Break in content" with javascript? I have a repeating table in a form and want only long tables to break after a certain height. Simple question but I guess that the answer is not. Cannot find anything whatsoever after searching for several days.

  Thank you

  Arvind

  Hi Arvind,

  I don't think you can set the page break in content 'allow' with JavaScript.  If you set allow a page break in the content on your table, and then you could add a subform that causes a page if the table is small enough to fit on the next page.

  You'd have to do in the event layout ready and update form in the ready layout structure can cause that it become desensitized because it weakens the event fires again.  This means that you must be careful to remember what caused the event.

  In any case, here is an example that should help you get started.  https://sites.Google.com/site/livecycledesignercookbooks/home/ForcePageThrow.PDF?attredire cts = 0 & d = 1

  Take a look at the layout event code: loan Subform1.

  Concerning

  Bruce

• Can I copy or cut a file of muse a high level of the page master form to another?

  Can I copy or cut a file of muse a high level of the page master form to another?

  Hi Graham,

  You can copy the contents and paste them into another file of Muse however copy and paste pages are not supported currently.

  Kind regards

  Akshay

• How can I configure my site to extend atomically pages to repair windows different bower?

  How can I configure my site to extend atomically pages to repair windows different bower?

  Hello

  I think we're talking about creating sensitive to the Muse pages that adjust the content according to the size of the window. Now Muse don't create sensitive design but there are few features in Muse using which you can do this to a certain limit.

  Please check the suggestions of Zak in the link below.

  You can create sensitive sites with Adobe Muse?

  Concerning

  Vivek

• Link to the page master pages

  I have a document of identity have been I have two masters (propagation) pages but my pages are unique pages. If initially, when I created master pages, it only works on all other pages, so I duplicated it and place the content of the first page master on the second page master.

  I ran into a problem when I go on change something on the master page (like naked an object above), because my pages are simple rather that extend, if travel off road Center. I tried to delete a master page and its works, but only for the odd number pages, because the evens have been ordered by the second master page.

  Is it possible to convert a master to a page alone, or at least a link to the single master page numbered pages?

  Here's the problem:

  

  Here's what I want:

  

  Nevermind I figured out that remove a car linked to the others, however, some of them would not be updated because the object I want to move has been locked on the page in question. If some even number pages changed, it's just those specific with a lock on the object on this page which would not update.

• Blocks of text on the Pages of body 'Buried' after update of the Page Master

  I have a background full screen on my main page (on the left in this case) that integrates static graphics and borders for certain master pages. I use the borders/boxes for NOTE and END of text on some pages. Blocks of text on these master pages do not overlap. I added text blocks with my icons and the text of the note to these body Pages that I need them. All great so far.

  I decided to update the background chart on page master to change colors, etc.. All files are linked.

  Now, with funds master page updated, these pages where I added text blocks are 'buried' as on a sublayer. I checked that my Master Page background images are "sent back". I tried to wear my text boxes at the front on the Pages of my body, but they are still hidden. Interesting as the anchored frame (the icon), I attached to each NOTE or TIP point appears, but the text is not. Also, I can see and select the contours of the block... the text is hidden. If I drag the fame to another part of the document (for example, on top of another Master Page text frame sank, while the text is displayed.

  There is no image on the master page to the enclosed area. I wonder if that's what I need trouble. Just add a backstory (not attached flow)?

  Advice before I go and screw something else?

  It is what it is supposed to look like (1). Image (2) what I mean now.

  

  

  Thanks Arnis,

  It was the property of skin! How simple... I didn't have on this subject.

  Solved!

  To answer you question, however... my approach for the construction of this new model was:

  1. I created a graph from bottom (full page) to contain the image of brand and imported/positioned.
  2. I placed the header and a footer frame and filled with content.
  3. I placed the blocks of text with streams (as a single stream in this document).

  I'm not dropping blocks of text for the content of the body... except for these tips and remarks. I don't want to use a workflow for this because I never know where they'll pop up and I want to be able to (position) specifically on each page. Is this a good approach?

  Yes, I'm aware of the continuous line down the block of text NOTE you mentioned. Originally, I had all the text within the limits. When I have updated master, all offbeat pages (only in blocks of text body page with notes/tips). I repositioned and they flow very well now.

  Thank you very much for your help continues with it. Why these problems always pop nitpciky - up to date - not when things are slow!

• What are the causes of pages to display in different widths?

  I am doing a website in Dreamweaver, but I find that some pages display a slightly different width.

  Still a few pages to the same exact width, but some do not.

  All files have been cloned originally the same index file.

  I checked all the numbers in the CSS code for the width of the body, container, padding, content, etc... and they seem to all match.

  But they appear at different widths... so it's a little jarring when a click from one page to another.

  The original index file is:

  http://www.johnnez.com/xindex.html

  The wider pages are:

  http://www.johnnez.com/xmainslideshow.html

  http://www.johnnez.com/xmaindigital.html

  I wonder where should I look to change the width to make sure that all pages display the same width?

  Jean nose says:

  I thought that my pages already had CSS.

  They do, but each individual page contains the same CSS rules. Very inefficient and time-consuming to maintain.

  Much more effective if you move all CSS in a separate file and a link to a file CSS on each page. That's what Nancy to come.

  Jean nose says:

  I wonder is there an advantage to having the CSS linked to an external CSS sheet?

  Yes, certainly.

  Remove all the CSS of each page rules means less code per page = faster download times.

  All CSS in a spot means you don't have that one place to look to change the CSS for the whole site and the rules in the CSS a tiny file instantly updates every webpage linked to this CSS file.

  Jean nose says:

  I still don't understand why some pages display a bit wider than others.  I checked all the padding and cannot find the difference to realize.

  I wonder if there is a way to fix the width of the page, so it won't expand at all?

  Add "html {overflow-y: scroll ;}}. (without the quotes) to the CSS on each page.

  Or, better, to outsource the CSS code in a single file and add "html {overflow-y: scroll ;}}. (without the quotes) for a single CSS file.

  See http://css-tricks.com/eliminate-jumps-in-horizontal-centering-by-forcing-a-scroll-bar/

  Jean nose says:

  This is the main index file I used with the internal CSS.

  You have provided a link so there is no need to post code. We can see what we need via the link in our browsers.

• How can I remove shadow in the page master Muse?

  Hi, I'm trying to get rid of a drop shadow around the edge of the browser as a Muse. Simply unchecking the effect in the master page ("' effect > shadow" ") does not work. Cleared the cache of browsers, downloaded from the site of BC, verified the effect in various breakpoints, nothing seems to work. Anyone?

  Discovered this problem caused. In my master page - even without selecting something - the graphic style of an element with a shadow was applied, accidentally. I changed the graphic style in the whole of the page master to 'none' and that did the trick. Problem solved.