Page of dashboard with multiple reports and guests

Similar Questions

• Sometimes a web page is displayed with only text and no picures. It is not always the same site and is not always the case. If I'm going to explore for the same website that always works

  Sometimes a web page is displayed with only text and no picures. It is not always the same site and is not always the case. If I'm going to explore for the same website that always works

  Hello

  Also try a Ctrl + F5 refresh. This allows to bring the content of the page again.

• Can bookmarks be portable to multiple computers? Is it an option to connect and use my favorites with multiple computers and locations? Thank you

  Can bookmarks be portable to multiple computers? Is it an option to connect and use my favorites with multiple computers and locations? Thank you

  https://support.Mozilla.com/en-us/KB/what-Firefox-sync

• Indicator of waveform data dashboard with multiple locations

  I have a chart in waveform with multiple locations on my main VI running.

  I use the Application Dashboard data 2.2.1 on my Ipad to monitor table of wave shape of my running app.  I placed a marker on my Ipad and also related waveform with my waveform array variable.  I can't play my data dashboard application because it shows unable to connect to the server.  I noticed that it is because of multiple plots being plotted on my table of waveform.

  I could only play the App data dashboard when it is just a single parcel related to an indicator on the App.

  My question is if it's possible to have a graphical indicator of waveform on a data dashboard that has several plots being plotted and not only a single square, and how to configure it?

  Thank you.

  Click on Bravo and select as an accepted answer.  You are welcome.

• gmail login page always opens with my username and password already filled

  I go to the login page for gmail - little matter how I'm here via a bookmark or not - the page is always displayed with my username and password already filled. Questions (a) is not sure, anyone could sign as me simply by pressing 'back' (b) other users in the House need to back my details away in order to enter their own.

  I tried to reinstall Firefox - no use. How to make a gmail login page to open with empty boxes for username and password?

  Thanks in advance for any advice!

  It seems that your username and passoword are saved in your browser. You cannot remove from tools > Options > Security > saved passwords Panel. Also you can enable/disable this password box do not forget in the same pane.

• Problem with the report and the system of axis 2d

  Hi, I'm trying to write a script with tiara, who wrote a 2d axis system in the report but I'm having a lot of problems with it.

  What I'm trying to do, is make 3 or more system axis 2d in the report, each displaying a part of the data of 2 channels (x = ch0, ch1 = y).

  With only 1 graphic I get what I want, but when I try to add the 2nd or the 3rd, they show without my defined x-scale and with the offset x different from the first chart.

  I tried everything, but I could not remedy

  I added as attachments the .csv file that I use to ch0 and ch1 and 2 screen shoots "what I get" (about the problem with the script) and "what I hope to get" (done manually, is what I'm trying to get the report)

  Any help will be appreciated, thanks in advance

  Ierman

  I'll post my code here:

  Dim Xscale, Yscale
  XScale = Array (0,25,0,5,49)
  Yscale = Array(-0.2,0.2,-0.2,10,4)
   
  Call PicDelete()
  Call GraphObjNew ("2D-Axis", "2DAxis1")
  Call GRAPHObjOpen ("2DAxis1")
  D2AxisTop = 1

  D2AxisBottom = 70
  D2AxisLeft = 1
  D2AxisRight = 1
  Call GRAPHObjOpen ("2DYAxis1_1")
  D2AxisyScaleType = "manual".
  D2AXISYBEGIN = Yscale (0)
  D2AXISYEND = Yscale (1)
  D2AXISYORIGIN = Yscale (2)
  D2AXISYTICK = Yscale (3)
  D2AXISYMINITICK = Yscale (4)
  Call GRAPHObjClose ("2DYAxis1_1")
  Call GRAPHObjOpen ("2DXAxis1_1")
  D2AxisxScaleType = "manual".
  D2AXISXBEGIN = Xscale (0)
  D2AXISXEND = Xscale (1)
  D2AXISXORIGIN = Xscale (2)
  D2AXISXTICK = Xscale (3)
  D2AXISXMINITICK = Xscale (4)
  D2AxisXTxt = ""

  D2AxisXColor = 'black '.

  D2AxisXTickAuto = 1
  D2MTickLineWidth (1) = 0.1
  D2MTickLineType (1) = "solid".
  D2AxisXTickSize = 60
  D2AxisXTxtAutoCo = 0
  D2MTickColor = "red".
  Call GRAPHObjClose ("2DXAxis1_1")
  Call GraphObjNew("2D-Curve","New_Curve")

  Call GraphObjOpen ("New_Curve")

  D2CCHNX = "[1] / [1]" "

  D2CCHNY = "[1] / [2]" "

  D2CurveColor = "red".
  Call GraphObjClose ("New_Curve")
  Call GRAPHObjClose ("2DAxis1")

  Dim Xscale1, Yscale1
  Xscale1 = Array (25,50,0,5,49)
  Yscale1 = Array(-0.2,0.2,-0.2,10,4)
  Call GraphObjNew ("2D-Axis", "grafic")
  Call GRAPHObjOpen ("grafic")
  D2AxisTop = 40

  D2AxisBottom = 37
  D2AxisLeft = 1
  D2AxisRight = 1
  Call GRAPHObjOpen ("2DYAxis1_2")
  D2AxisyScaleType = "manual".
  D2AXISYBEGIN = Yscale1 (0)
  D2AXISYEND = Yscale1 (1)
  D2AXISYORIGIN = Yscale1 (2)
  D2AXISYTICK = Yscale1 (3)
  D2AXISYMINITICK = Yscale1 (4)
  D2AxisYTxt = "" ' testo asse label y
  Call GRAPHObjClose ("2DYAxis1_2")
  Call GRAPHObjOpen ("2DXAxis1_2")
  D2AxisxScaleType = "manual".
  D2AXISXBEGIN = Xscale1 (0)
  D2AXISXEND = Xscale1 (1)
  D2AXISXORIGIN = Xscale1 (2)
  D2AXISXTICK = Xscale1 (3)
  D2AXISXMINITICK = Xscale1 (4)
  D2AxisXTxt = «»

  D2AxisXColor = 'black '.

  D2AxisXTickAuto = 1
  D2MTickLineWidth (1) = 0.1
  D2MTickLineType (1) = "solid".
  D2AxisXTickSize = 60
  D2AxisXTxtAutoCo = 0
  D2MTickColor = "red".
  Call GRAPHObjClose ("2DXAxis1_2")
  Call GraphObjNew("2D-Curve","New_Curve1")

  Call GraphObjOpen ("New_Curve1")

  D2CCHNX = "[1] / [1]" "

  D2CCHNY = "[1] / [2]" "

  D2CurveColor = "red".
  Call GraphObjClose ("New_Curve1")
  Call GRAPHObjClose ("grafic")

  Hi lerman,.

  Here is an edited version of your code that works on my computer.  A problem that I know that I fixed it was that your presentation of the STATE was in the name-oriented mode but you use the variables based on the number to assign it X and Y channels.  The execution of these commands in a loop FOR makes it much easier to debug the code and to avoid any annoyance at first.

  Brad Turpin
  Tiara Product Support Engineer

  National Instruments

• Choose a high allpage of facebook and do only one page of facebook with all messages and friends

  My facebook log page came a few anonimosmalaway and I try remomve and date there. My faceboopage separated into four pages and

  I have a friend and member of my family on the individual page. And I don't know how when I go to close the page with log on and go to showt the PC in the form of four icons with facebook pages and an icon of such Microsoft fix it facebook.

  HI Los,

  What is the problem that face you?

  Operating system?

  Browsing using Internet Explorer? So what version?

  If this question is on facebook, then contact Facebook support.

• Audition with multiple monitors and nVidia - crashing / flicker

  When using mulitple monitors hearing signal several times at the start, take longer to start and often crashes.  When you use a single monitor, hearing throw very well.  We run Windows 7 Pro on to Lenovo T430 with nVidia NVS 5400 M card.  I have also some Lenovo x 230 who have Intel Graphics.  When you use multiple monitors with Intel graphics card, it works fine.

  E-mail log files (na not see an option on attach firmly to this topic).  It seems that the main difference is not only with multiple monitors, but rather with nVidia graphics.  Multiple monitors on a laptop computer Intel Graphics ONLY works great... no problems.  Multiple monitors on a computer of graphics from nVidia has problems.  However, when the didn't use a monitor on nVidia computer, it works fine.

• unique IP address does not work properly. with win7 host and guest.

  Hello

  I can use internet equally as good on my host and guest WIN7 using a bridge connection.

  I use a bridge connection.

  My main goal with win7 as a virtual machine is to use the same application online with a different IP address... This is where it falls apart. When I do 'whatsmyip"on the virtual machine and the host. It appears to be the same.

  ipconfig in CMD shows 192.168.1.x1 on the host and 192.168.1.x2 on the comments. but make an ip check online shows that

  96.365.1xx.x on two of them.

  I only got an E-card... but maybe there's a way to fool the router by giving me two single dynamic IP address...

  Thank you for your time!

  Attached is a mental map of the way I'd like it works. (The two runnig Windows 7)

  On the IP addresses should not be the same as those listed below

  

  The problem here is not in VMware Workstation or your host, its your NAT:ed internet connection.

  Your internet provider very probably only you give an IP to get out, if you want more you have to communicate with them.

  Linjo

• Adding pages that integrate with the previous and sebsequent.

  Now if I add a page and delete text on the page before the addition of the page, text on the page after adding the page moves back to the previous page as if the new page wasn't there?  How can I get InDesign to recognize the addition of the page in the document, this text is screwed to the addition of the page?

  And is there an easy way to block all text and graphics on a specific page, for example, the title page chapter so it isn't thread returns to the previous page, when something is deleted on the previous page?

  InDesign is not a word processor. If you want a string of blocks of text, you need to add a block of text to the new page, click the out port of the block of text on the previous page and then click in the text frame on the new page. The out port can be seen here (circled in red):

  

  Jim-Montreal wrote:

  And is there an easy way to block all text and graphics on a specific page, for example, the title page chapter so it isn't thread returns to the previous page, when something is deleted on the previous page?

  Do not include the things that you do not want to flow with the text in the text flow. Use a block of text. In addition, you would benefit from an InDesign training. This book was recommended by many on this forum: CC InDesign: Visual QuickStart Guide (version 2014): Sandee Cohen: 9780133953565: Amazon.com: books

• Problem with hard stop and guest OS - question of VMotion

  Hi all! I'm having a problem and I hope I can find help...

  Basically, we are in the middle of HA and VMotion test and we found that when we make a hard stop on one of our boxes of ESX 4 (simulating the loss of an ESX box), the guest operating system disconnects and stops on the ESX host that cut us off. He does VMotion off for another host ESX in our environment and then restarts the VM guest save... Anyone has any ideas of why it does this? It should be keep alive, no?

  I have install multiple ESX 3.5 environments and never had this problem and hoping maybe I am missing something in ESX 4.

  Thank you!

  Ed

  false, he did exactly as it was designed... the name chosen for HA is perhaps not the biggest.

  It should help you understanding between the HA and FT:

  http://www.VMware.com/products/VI/VC/HA.html

  www.VMware.com/PDF/vmware_ha_wp.pdf

  http://www.VMware.com/products/fault-tolerance/

  www.VMware.com/files/PDF/Resources/ft_virtualization_wp.pdf

  Essentially if you want continuous availability, without interruption, you need to implement VMware FT (Fault Tolerance) While HA, will try to minimize downtime as little as possible, but it's time to stop, as you saw.

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  repository scripts vGhetto

  VMware Code Central - Scripts/code samples for developers and administrators

  http://Twitter.com/lamw

  If you find this information useful, please give points to "correct" or "useful".

• Multi language support for reports and guests of labels

  Is there a way to configure reports prompt the labels with the session\presentation variable
  in order to support multi language interface?

  Hi Nir,

  The reference is established to the RPD. Open the RPD-> presentation-> double layer click on the category column and type in the name of session variable, as shown here.

  http://i51.Tinypic.com/qp3pkh.PNG

  Rgds,
  DpKa

• Directly open an htm page to help with the TOC and header frame

  I was wondering if there was a way to directly load a specific help page and still have the images left and top display.

  For example, my main help page is:

  MyHelp\mainHelp.htm

  When I enter this url everything seems correct, and I have a TOC box with a senior that include search, etc.

  I also have a help page specific that I can navigate from the TOC framework.  Let's say that:
  Topic1.htm

  If I go MyHelp\Topic1.htm - the only thingdisplayed is the page of Topic1.htm itself and no other frames.

  Does anyone know how I can do these chassis more appear?

  Thank you

  See call WebHelp by using URLS on my site.

  See www.grainge.org for creating tips and RoboHelp

• How to operate the laboratory discovered multi-function synchronization with multiple devices and change the recording time?

  Hi, I'm new in Labview. I need help for:

  1 change a program multi-function in order to record the data of three cards daq (devices 1-3) and output through the map (1 unit). The current program was created to record and output signal of one of the card (1 unit). I try to choose multiple devices when I run the program, but there is an error 200558 shows "a task cannot contain multiple independent devices. Create a task for each independent device.

  2. change the duration record for a longer period, for example: 0.1 s. Currently, the recording time is s 0.009971.

  I joined the multi - funtion.lld. In this library, "des_v2_Multi-Funtion_Synch I - AO.vi" is the program that I need to change. I've also attached a file of input for runing the program signal.

  Thank you very much!

  Sincerely,

  Jie

  Hello Jshen6,

  You can have different examples of VI if you do not use the same version of LabVIEW. I am currently operating on LabVIEW 2013 SP1. Whatever it is, this article should be useful to you that he describes in detail how to synchronize multiple tasks of series M.

• The filtering of the VPN 3000 with multiple businesses and internet access?

  Hello

  We have a scenario where we want to up to 6 companies to connect to a concentrator 3000 3002 HW-customers. Companies should be able to have access to the e a few machines at the central site and and at the same time having access to the internet. We will use network extension mode. They cannot use the PIN-tunnel and we want that all internet traffic through the central site.

  Anyone who think that using the 3000 for this "filtering" is a good idea or should I use an external router routing policies?

  I use the 3000 to complete tunnels and parallel with your corporate firewall. Set the default gateway of Tunnel on the 3000 to be inside the IP address of the firewall and add a static route on the 3000 to your internal network, pointing to your next hop router. Add static routes on your firewall for remote VPN network pointing inside the VPN3000 IP address. This way no matter what VPN traffic that is destined for your interior, network will go to your home router and nothing else (Internet traffic), will go to your firewall and get routed Internet.

  As to where you place the filters, you could put them either on the 3000, but personally I do not like the filter - rule in 3000 stuff too. I would put a list of access on your router (who carry static electricity pointing towards) which allows specific remote networks simply get to the individual inside the hosts and nothing else, it's a lot easier to manage.