Audition with multiple monitors and nVidia - crashing / flicker

Similar Questions

• Problems with multiple monitors for critical update Windows 7

  Since the update critical October 1, I can no longer run multiple monitors.

  According to the record, this update made changes at the same time the driver for my AMD Radeon 7470 and Dell monitor 1.1 card, and I've updated the software.

  Devices for work and when I pass cables or remove cables. Yet they are simply not recognized as connected.

  Hello Kent,

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the issue.

  This problem may occur because of corrupted or incorrect display settings.

  I suggest you run the hardware and devices Troubleshooter and check.
  Reference:
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Please also read this article and check.
  Work and play better with multiple monitors
  http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• 4235 with multiple monitoring Interfaces?

  This is a general question as to whether anyone is running on 4.0 4235 sensor code with multiple monitoring interfaces?

  Basically, I wonder if you have any comments on the performance or if you run into any problems with the configuration. I have not seen too much documentation for configuration in fact this, so I wonder if there are additional requirements or considerations.

  Hi Chad,

  With ID 4.0, you can only montior using an interface to sniff. 4.1 you will have taken care of multiple monitoring interfaces.

  As far as performance goes, I don't see any problems and more to ensure that the management station is able to handle the upcoming alarms when using several interfaces.

  Thank you

  Obaid.

• Display problems when you run applications JavaFX 2.0 with multiple monitors

  I noticed a number of issues when running JavaFX 2.X applications on a system with multiple monitors. My setup consists of 2 monitors (primary and secondary on a dual graphics card) and my third on a separate graphics card.
  
  The questions I have observed are,
  
  (1) the application is not too sensitive when running on the second or third monitor.
  
  (2) when the application runs on 2 monitors and re-tire it will only redraw correctly on one of the monitors. The application will be displayed as a black box on the another moniter
  
  (3) where the application does not run on the primary monitor and a ChoiceBox is selected choice appears as expected but it blackens the application in the background.
  
  Someone else encountered similar problems? I'm going to raise a JIRA with screenshots and details of my system if other people are able to confirm that they are also suffering from similar problems.

  Hi, I had similar problems. My application uses 2 monitors and now everything works just perfect. It turned out that the interface is causing these disorders. I changed mine, then he worked (actually more the new installed I also had to update the driver for the new interface)

• Can bookmarks be portable to multiple computers? Is it an option to connect and use my favorites with multiple computers and locations? Thank you

  Can bookmarks be portable to multiple computers? Is it an option to connect and use my favorites with multiple computers and locations? Thank you

  https://support.Mozilla.com/en-us/KB/what-Firefox-sync

• is it possible to save the Office XP for multiple monitors and restore after using the laptop in mobile mode?

  Is it possible to save the Office XP for multiple monitors and restore after using the laptop in mobile mode?

  Hi Kenelms,

  You can follow this link & check if it helps.

  HOW to: Set up hardware profiles for laptop computers in Windows XP

  Hope the helps of information.

  Please post back and we do know.

• Why are there people tecsavy call me to get money for my microsoft programs I already bought with my computers and they crashed my good computer

  Why are there people tecsavy call me to get money for my microsoft programs I already have bought with my computers and they crashed my good computer, I am a stay home Grandma take care my 3 grandchildren, they wanted 300. for my computer with windows vista and now they want 190. for this computer, why microsoft would let people do such things

  s7cwa7

  Hi Julie,.

  Microsoft has none of the unsolicited telephone calls to help you fix your computer. You can consult the following documentation to learn more about the same.

  Avoid phone scams | A cybercriminal Tech Support Scam | Security threats

  Fraudulent emails and credit scam advice cards | Microsoft Security

• Impossible to uncheck "extend the desktop on this monitor option" when you work with multiple monitors.

  Title: Cancellation of the DESKTOP EXTENSION

  I am wanting to "uncheck" the 'extend the desktop to this monitor "... It's 'grey '.  How can I fix?

  Hi Goldie01,

  I understand that you are haivng problem with the connection of multiple monitors. I'll be happy to help you with this problem.
   
  (1) have you tried to connect the monitor directly on the CPU and check?
  (2) have you made changes on the computer before this problem?
   
  Method 1: I suggest you run the Microsoft FIXIT from the link and if it helps.
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us
   
  Method 2: I also suggest you follow the steps to configure and change the display on multiple monitors of links and check if that helps.
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-multiple-monitors
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-display-settings-on-multiple-monitors
   
  For reference:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-multiple-monitor-problems
   
  Method 3: Also, I suggest you to update the graphics card drivers and check if it helps.
   
  I hope it helps. If you have problems in the future, please let us know. We will be happy to help you.

• Flash with multiple monitors

  Hello
  
  I have a problem with the Flash projector and multiple monitors.
  
  I'm developing an application with the .exe file running on a multiple monitor environment, when I try to get a full screen (with CTRL + F or fscommand ("fullscreen", "true")) display only goes to the main screen.
  
  The only thing that works is to maximize the application but I get the menu and the windows taskbar and the key.
  
  Someone has any idea how to solve this problem?
  
  Thank you in advance.
  
  Javier.

  I think that unless your desktop is set on both monitors and double not only a vision, full screen will always go to just the main monitor. Most graphics cards dual monitor give you the possibility of having dualview, or span.

  Russ

• RDP to machine with multiple monitors, preserve the application position

  Dear community

  I have a Windows 7 Pro machine in my office with 2 monitors. I have my apps positioned on these two monitors.

  Of the House, I use RDP to connect to this computer. My RDP supported a single window, applications appears in this window.

  If I disconnect the RDP session, my desktop computer remains connected. I connect back to the office, and my apps will automatically go to their 'proper' again monitor.

  It's all a great feature, which means that I can't move my apps around again once I am back in the office.

  My colleague has the same configuration, but it has 6 monitors at the office.

  Following the same logic from above, I would expect applications to their selected monitor, but appears not to be the case.

  Does anyone know if there are limits here?

  Kind regards

  Hello

  Thanks for posting your query on the Microsoft Community.

  I understand how it could be frustrating when things don't work as expected and I appreciate your efforts to resolve the issue.

  However, before I would need some information to help you best.

  This computer is on a domain network?

  If Yes, then we have a support forum dedicated to systems on area issues, I suggest you to post your query on Microsoft TechNet forum for this issue. You can get more effective suggestions and adapted by experts familiar with this topic.

  Please visit the link below to find a community that will support what ask you:

  Microsoft TechNet

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

  Thank you

• Detection of resolution Windows move Application Windows with multiple monitors

  Looking for a few tips:

  I have a laptop Dell XPS13 plugged into a Targus docking station, to which I have two connected displays. So, indeed, I have three monitors, which is the screen of the laptop.

  Every now and then monitors everything flashes once or twice; When it's finished, all or part of my application windows are passed to different monitors, generally meet on the screen of the laptop. I think that Windows must re - adjust the resolution or something, and is not to remember what application is linked to which monitor.

  What is the result of an intermittent connection between the monitors and laptop docking station? (These last two are brand new.) As I type this now, I have not known the issue for some time, so I wonder if it has nothing to do with what applications I use. I tend to 'maximize' windows in monitors, if that makes a difference.

  Jason

  Hi Jason,

  Thanks for sharing the information. Your efforts to solve this problem is appreciated.

  Feel free to post your request here on the Forums of Windows, we would be happy to help you.

• You can print screen a single monitor in a system with multiple monitors?

  Hi all

  In our application, there is a 'Print' button which will take the printscreen and add it to a report. Now that we have improved the system works in several monitors, I could not yet find a way to printscreen only the specified monitor.

  PS. : Normally whenever we do that PrtScr, it will take the image of all the monitors and not a single monitor. Alt + PrtScr print only the active window, but not all windows of this monitor.

  Any suggestion is appreciated.

  Thank you

  Luxama

  Hi George,.

  How do you the printscreen? I think that you simulate a command 'Ctrl + print' and read the image of the cilpboard. I have corrected the AAM?

  Before saving the image to a file you can cut it to the size you need. Sorry, resize was not talk to her.

  Mike

• Problems with external monitor and the Satellite U200 - 10 d

  I have a Satellite U200 - 10 d running Vista Business Edition. When I attach an external display screen flickers (horizontal lines on the screen)... It's worse when you move the mouse on the screen. The monitor on the laptop is fine I just have problems with the external display.

  The screen that I is a model VG1930WM viewsonic (widescreen) here is the specs of res for this screen...

  PC VGA up to 1440 x 900 non-interlaced
  Analog analog/digital RGB (75 Ohm, 0.7 Vc - c) / DVI - D

  Anyone have any ideas? I checked the graphics driver for vista and this is the latest version...

  HM, it's a nice solution, I have a friend with a similar problem.

  We will try your suggestion, snipe and perhaps give feedback if it worked for us.

  Welcome them

• Satellite L30-149, only works with external monitor and VGA mode

  Satellite L30-149, Windows XP Home Edition

  Yesterday I did face the following problem:

  I swithched on my laptop but I have nothing on the screen. I tried to reboot several times, but it did not help. If I look very carefully, I see the logo of Intel (black text on white on the screen) but nothing else. The logo shows very low.

  I plugged on the external monitor. With that he gives a little more. The Intel logo with the instruction how to reach configuration etc. Then Windows logo but when it should ask the user, the external monitor going to sleep mode and nothing happens after that.

  And an external monitor, I managed to connect to Windows in safe mode and also in VGA mode. In VGA mode, I tried to change the resolution, after that I got black screen again and I had to start.

  Now I wonder if I could do something (update of drivers, etc.) or should I go to the store where I bought the laptop and ask them to fix it. This look like a problem covered by the warranty?

  --
  Upgrade to this message (what happened after that I wrote the above text).

  I turned on the laptop again. I thing the lightning from the room is now better because I noticed that the laptop seems to work (almost) correctly. Windows starts normally, I can faintly see the desktop. This seems to be a problem in the background ligthning. FnF7 does not change the situation.

  Post edited by: mpetas

  > If I look very carefully, I see the logo of Intel (black text on white on the screen) but nothing else. The logo shows very low.

  This sentence is very interesting.
  Sounds like a question of FL-ups!

  It is a small part behind the screen and control the backlight of the screens.
  Usually, this part is not very expensive and the replacement is not complicated to a technician for laptop.

  If your warranty is valid, then everything should be done for free.
  Try to contact the ASP in your country and ask for later handling.

  Greetings and good luck

• Problems with multiple framerates and Blackmagic Decklink 4 K Extreme reading

  Recently, I exchanged by AJA Kona card for extreme Blackmagic Decklink 4 K in order to get external followed in DaVinci Resolve.

  I work in a 1080 p 23.976 project that includes a 29.97 SD and HD images. Loading these images of 29.97 FPS in my layer source footage, I meet regularly with frozen reading (the triangle of game in my toolbar becomes a symbol of the square and stays that way). From there on, I am unable to playback images in any scenario and requires a complete closure of the system to return to normal! The problem is apparently BOUNCING, with successful reading happening sometimes.

  Images of 29.97 was DVCPRO, I tried to transcode to Prores to solve problems. No dice. I think it's a problem related to the inability of the Decklink to manage several rate display on the fly, but wanted to present here, too. I also experienced delays intermittent sync on my monitor.

  DeckLink driver 10.0

  First CC 7.2.1

  Mac OSX 10.9.2 (mavericks before the same problem)

  Hi Andy,.

  You should not have problems with Blackmagic manage several formats on the fly. However, I believe that the problems of reading frozen that your description is related to the Desktop Driver video 10. I suggest rolling back to 9.3.3 for now. Blackmagic now turns on this issue.

  Best,

  Peter Garaway

  Adobe

  Premiere Pro