Page with dynamic array breaks

Similar Questions

• Need help filling single textfield with dynamic array data

  Hello

  I am filling a text field with a dynamic array data. So I know how many points are in the table with the instancemanager.count function. I need to help get the data from the dynamic table and insert into a field of text followed by a comma.

  Example:

  Dynamic table: row [1]: DATA_01

  line [2]: DATA_02

  rank [3]: DATA_03

  ...

  I would like to than the text box to automatically fill data in this format: DATA_01, DATA_02, DATA_03... and continue if there is more data.

  I started with the code below, but it does not work.

  var Count = form1.page2.DATA_history.instanceManager.count;

  var temp;

  for (var i = 0; i < Count; i ++)

  {

  Temp = xfa.resolveNode ("form1.page2.PO_history [" + i + "]"). DATA.rawValue;      This seems to get the last line only entry.

  this.rawValue = this.rawValue + temp;

  }

  I hope I was clear, but if someone need for clarification please ask. Thank you.

  Hello

  Try the following:

  var Count = form1.page2.DATA_history.instanceManager.count;

  var temp = "";

  for (var i = 0; i)

  {

  Temp = temp + xfa.resolveNode ("form1.page2.PO_history [" + i + "]"). DATA.rawValue + ",";

  }

  this.rawValue = temp;

• Problem with dynamic arrays, XML and JavaScript patterns

  With the applied XML schema my JavaScript does not correctly work when it is added a 2nd row at my dynamic table. Instead of an added empty line 1st row data is copied on the 2nd line and if you change the data in the 2nd row it modifies data in the 1st row also. It works fine if the XML schema data connection is well removed.

  No idea what I can do to get this working with the schema that is applied in the same way, it works without the schema?

  Thanks for your help,

  Brian

  There you go. Its not a problem.

• How to fill a dynamic array according to the choice of the Viewer

  Hello

  I came across a dead end on my page "events".

  There is a dynamic array, get the information from a database. Initially, it will display upcoming events.

  At this point, my question is this:

  * Can fill the dynamic table based on a condition where the current date and the date of the event (as in the comic book) will be compared and if the date of the event is aware of the date, it will appear in the table. Otherwise, it will not.

  If I can do it, can someone please help me with the code?

  In addition, on the right side of the page there are 3 options for the Viewer:

  1. display upcoming events

  2 discovered past events

  3 search for events by month and year

  What I want to do, is that when the viewer clicks on 'past events', the table will be reset and populated by these events, whose date is exceeded.

  When the viewer clicks on "upcoming events", the table is reset again and filled with the relevant events.

  When the viewer selects a month and a year, the database to find reviews of research.

  Can we write this in php? Since I read smwhere that php does not work with onclick functions... I got confused. Cuz in my table data should vary depending on what the Viewer is clicking (coming events/events/research past events). I do not want to create pages for each type of event.

  If anyone has a better suggestion to complete this task, please share!

  Thank you!

  > Can I complete the dynamic table based on a condition if the current date and the event date (as in the comic book)

  > will be compared and if the event date is later than the current date, it will appear in the table. Otherwise, it will not.

  Of course. Just compare the date field in your database with the current time as returned by the function of date of your DBMS. Assuming you are using MySQL, you would compare your column with the currdate() function and the appropriate use of upper / lower to operators in the WHERE clause. If you don't know what a WHERE clause is then I invite you to learn SQL as soon as possible. You can't build data sites without a basic knowledge of SQL.

  > Since I read smwhere that php does not work with onclick functions...

  This means that php is a server side, where interactions with the user always occur on the client's site. But that doesn't mean that you can't call action from the side event on the client side server. Certainly, you can and would be.

  You should consider adding links to the page of dynamic array passing a querystring to the php script that determine which filter to add in the future WHERE clause to the current date, less, etc..

  Also, in the future, please post those questions on the application development forum.

• AMPe ADF with Dynamic tab Shell not made in iPAD 1 +.

  Hello
  
  We used the Oracle Dynamic tab Shell templates to build our page of dashboard with several dynamic tabs.
  A year back when we have initially created the main dashboard with Dynamic tab Shell and used of the UIShell API to open new dynamic tab when clicking the command links in the browser side of left hand. We started with Jdev 11.1.1.3 and upgrade us until Jdev 11.1.1.5.
  
  Now this last requirement is, we need to test our applications in the Safari browser in iPAD (2.0). During the test, we observed under questions.
  
  (1) the page with Dynamic tab Shell JSPX is keep showing "Loading"... "We had updated the Safari browser twice to render the page.
  (2) any af:commandLink under the JSPX which has shell model dynamic tab, does not. We have lots of links on the left navigation and when clicking on each link will open a new tab dynamic (we use UIShell API). Nothing happens when clicking on these af:commandLinks.
  (3) we have 'Home' and 'Logout' links at the top right. Nothing happens on the links click too.
  
  All these as af:commandLinks and af:commandButtons not working as expected when we have them beside a JSPX page without shell dynamic tab.
  
  Tested and observed the same behavior both in version 1.0 and newer iPad iPAD 2.0.
  We desperately need help on thin. Pls let us know, if I need to provide more details. Are there specific configurations required to make it work in Jdev 11.1.1.5? At this stage we cannot improve our Env 11.1.1.6 or 11.1.2 as we already have these applications in Production and we should give users flexibility to be used in the iPAD.
  
  Help, please!
  
  Thank you!!
  Subba.

  Subba,

  I understand, however support for iPad added in PS5 is a set of new features, not a bug fix, so this cannot be claimed as a one off patch with the support of the Oracle. In this case that is expected to capture customers highlights new features of upgrade.

  Thank you

• With dynamic region ADF runtime errors

  I use a dynamic region in my web project. I use JDev 11.1.1.3 and use the built in weblogic server.
  Things work very well and I do not see the dynamic region work perfect.
  
  My colleague does not Jdev/Weblogic. It uses another IDE and run the build script to deploy the project to a single weblogic server.
  But there is no ADF faces DURATION 11.1.1.3 installed on its box.
  
  He sees the error when accessing the page with dynamic region below. Guidance as to what might be missing here?
  
  < WARNING > < oracle.adf.view.rich.component.fragment.UIXRegion > < BEA-000000 > <
  java.lang.IllegalStateException: the expression "#{bindings.dynamicRegion1.regionModel}" (which has been specified for the region
  Odel attribute "value" component of the region with the id "r1") evaluated to null.
  This is usually due to an error in the configuration of the objects referred to by this term.
  If it helps, the expression "#{bindings.dynamicRegion1} ' value 'null '.
  If it helps, the expression "#{bindings} ' value 'null '. Now using a RegionModel empty instead.
  at oracle.adf.view.rich.component.fragment.UIXRegion.getRegionModel(UIXRegion.java:439)
  at oracle.adfinternal.view.faces.taglib.region.RegionTag.doStartTag(RegionTag.java:109)
  at jsp_servlet.__forecasteradmin_jspx._jspx___tag10(__forecasteradmin_jspx.java:572)
  at jsp_servlet.__forecasteradmin_jspx._jspx___tag6(__forecasteradmin_jspx.java:406)
  at jsp_servlet.__forecasteradmin_jspx._jspx___tag5(__forecasteradmin_jspx.java:351)
  at jsp_servlet.__forecasteradmin_jspx._jspx___tag4(__forecasteradmin_jspx.java:307)
  at jsp_servlet.__forecasteradmin_jspx._jspx___tag3(__forecasteradmin_jspx.java:256)
  at jsp_servlet.__forecasteradmin_jspx._jspx___tag2(__forecasteradmin_jspx.java:205)
  at jsp_servlet.__forecasteradmin_jspx._jspx___tag1(__forecasteradmin_jspx.java:154)
  at jsp_servlet.__forecasteradmin_jspx._jspx___tag0(__forecasteradmin_jspx.java:104)
  at jsp_servlet.__forecasteradmin_jspx._jspService(__forecasteradmin_jspx.java:65)
  at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
  to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:227)
  at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
  at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
  at weblogic.servlet.internal.ServletStubImpl.onAddToMapException(ServletStubImpl.java:408)
  at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:318)
  at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
  at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:499)
  at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:248)
  at com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:410)
  at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)
  at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)
  at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)
  at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)
  to org.apache.myfaces.trinidadinternal.context.FacesContextFactoryImpl$ OverrideDispatch.dispatch (FacesContextFactor
  Impl.Java:267)
  at com.sun.faces.application.ViewHandlerImpl.executePageToBuildView(ViewHandlerImpl.java:473)
  at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:141)
  at javax.faces.application.ViewHandlerWrapper.renderView(ViewHandlerWrapper.java:189)
  at org.apache.myfaces.trinidadinternal.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:193)
  at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._renderResponse(LifecycleImpl.java:710)
  at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:273)
  at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:205)
  at javax.faces.webapp.FacesServlet.service(FacesServlet.java:266)
  to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:227)
  at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
  at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
  at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:191)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  at oracle.epm.forecaster.view.filter.ForecasterSessionExpiryFilter.doFilter(ForecasterSessionExpiryFilter.java:52)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97)
  to org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$ FilterListChain.doFilter (TrinidadFilterImpl.java:4
  0)
  at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
  to org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$ FilterListChain.doFilter (TrinidadFilterImpl.java:4
  0)
  at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247)
  at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157)
  at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  to oracle.security.jps.ee.http.JpsAbsFilter$ 1.run(JpsAbsFilter.java:94)
  at java.security.AccessController.doPrivileged (Native Method)
  at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
  at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
  at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:138)
  at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:70)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:326)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.run (WebAppServletContext.java:3592)
  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
  at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2202)
  at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
  at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)

  Hello

  + <>
  + java.lang.IllegalStateException: the expression "#{bindings.dynamicRegion1.regionModel}" (which has been specified for the region +)
  + the odel 'value' attribute of the component of the region with the id "r1") evaluated to null. +
  + It is usually due to an error in the configuration of the objects referred to by this term. +
  + If it helps, the expression "#{bindings.dynamicRegion1} ' value 'null '. +
  + If it helps, the expression "#{bindings} ' value 'null '. Now using a RegionModel empty instead. +

  Seems that the link layer is not configured. The call is correct? Web.xml file has defined binding filter?

  Frank

• Table dynamic line breaks only on the first page (not on the second)

  Hello

  I have to biuld a dynamic array with Livecycle.

  If the text in the last field is long, the table expands automatically.

  If the end of the first page is reached, the line breaks above the first page to the second (= 1st break)

  This method works correctly.

  But if the text is longer, and the field at the break of the second to the third page, the field does not break!

  Please see the attachment.

  The settings should be correct, because the break (from the 1st to the 2nd page) works.

  But why, it's 'dynamic behavior' limited to a SINGLE page?

  Can you help me please?

  Thank you...

  DAS Problem kommt von der vektorielle Textausrichtung, die bei be Formularfeldern immer mittig ist.

  Of the deine Textfelder "oben ausrichten" musst, damit der text auch nach unten so sauber.

  

• Dynamic array, not filling, works very well with the test button

  I built a recordset object and tested with the Test button and the Recordset returns my data on my remote server.  I then put a dynamic array on my php page that it points to the recordset of this work and that the PivotTable is empty.  The table displayed in design mode correctly with the recordset.vcolname, but when running that data are not to be connected.  I even tried just drag a few pieces of data on and still no data.  Any help would be appreciated.  Have a great day!

  There are a lot of things I want to mention, but do not have the time to.

  I'll start with the fact that you are using soon be deprecated MySQL instead of MySQLi or PDO.

  Second, you can't have your markup in the head section of your document as in

  Third, none of the session variables will not work if you start the session after your conditional statements. In other words, session_start() should be at the top of your document.

  There is more, but lack of time prevents me from analyzing those.

  My advice is to start with my third point, which is to place the session_start() at the beginning of your document and see if that changes things.

• Dynamically, use page number in the form on the pages with their field?

  I have a form with pages having engineered.  JS for spawning exception works very well.  However, a text field on model is driving me crazy.  I wish that this field ("CaseNum") to dynamically display the page number, given that the page number also matches the file number.  On templage ("getcase"), I can calculate the value for CaseNum using custom script calc (event.value = this. PageNum).  But it does not work because each page having spawned Gets the same value (that is to say, what is the latest issue of the page generated). I also tried the JS below, using P0.getcase.CaseNum as the field on the model in which I wish the page number/box number to display:

  var this.pageNum = opaque;

  this.getField ('P' + opaque + ".getcase" + ".") CaseNum') .value = opaque;

  But it does not either, because the page automatically generated field gets the prefix of the P + .getcase page number appended to the name of the field.  Is it possible to number of dynamic page used in a form on the pages with their field?  If so, how? Note that while I try to use a dynamic file on pages with their number, it presents the same problem as dynamically displaying pages with their page numbers.  I'm a JS newbie, so any help appreciated.  I searched high and low on the web and in the forums and couldn't find the answer.  THX.

  http://forums.Adobe.com/thread/1160899

  @

  7George Johnson,.

  

  February 28, 2013 09:42 in reply to natelfo

  Is that what you mean?

  See also:

  http://www.PlanetPDF.com/developer/article.asp?contentid=6466

  d-template-pages-using-JavaScript-functions/ http://www.wordwizardsinc.com/blog/Finding-the-FieldName-prefix-on-Acrobat-acroform-spawne

• Can I create a book, whose pages are dynamically filled with text, images?

  Can I create a book, whose pages are dynamically filled with text, photos, videos?

  And then want to give these pages a curl effect when activated. Pls. note I want to build these pages on the fly.

  If it is possible, what are the possible technologies that I can use?

  See you soon,.

  Samantray

  Flash can read data from several sources (XML files, text files, on the web, on-site, etc.) and you can use these data to populate your address dynamically. He can do the same thing with the pictures and any other active flash can use (images, video, etc).

  The effect of curvature of page can be done in different ways. Just google for flash page flip effect and tons of resources and tutorials will appear laboriously explaining how to do it.

• Script dynamic Page numbering does not work on pages with engineered?

  I work in Acrobat Pro XI on a document of 4 pages with a button that allows a page template will be inserted after page 3.  I created a button for this, and it works fine.  But each page has a text field that is supposed to automatically update all the page numbers.  The code looks like this:

  Event.Value = "page" + (event.target.page + 1) + "of" + this.numPages; ""

  calculateNow();

  On the four pages visible when the file is opened it works perfectly; they will update "Page 1 of 4" to "1 of 5", etc. without any problems.  However, the inserted template pages are very random.  Sometimes the firstbegotten will work and say Page 4 of 5, but sometimes he will say Page 0/4.  It is worth noting that even when he says Page 4 of 5 print this page shows that this saying Page 0 out of 4 again.  And all additional pages triggered after which lists a bunch of random numbers on the right number of pages.  So it will look like "Page 7, 6, 5, 4, 31 9.

  I search by a large number of questions already asked and have not seen enough.

  If you want to add a new page with each press of the button, you can simplify the code:

  getTemplate("Addittional_Collaborators").spawn (numPages, true, false);

  but you need to add code to define correctly the ' page x of y "field values. Post again if you have trouble with this part.

• How to create dynamic arrays parallel/side-by-side in Adobe cycle

  Is it possible to create dynamic arrays parallel/side-by-side in Adobe cycle?  If so, how?

  Given that the tables have different sizes, in that I am running wrapping issues with running adjustment of Western characters and characters from the pagination with checkpoint.  Any other ideas?

  In fact, I had tried this solution ("wrapping the tables in a subform of position and set to automatically adjust the height and allow page breaks"), but it did not work.  Something to do with nested subforms of position within a subform control flow etc.  So to make it work, I set the page to be a subform of position and the auto-hauteur value and allow page breaks and I unpacked the paintings while they were only 'wrapped up' of the page itself.

• find a block of text on the page with the name of script

  Hi all

  I need to create a script for

  find a block of text on the page with the script titled "xxx".

  and read its contents into a variable.

  The content of the text block is a number.

  Thank you

  Hello Roberto,

  Welcome to the forum,

  This is the textFrame marked on the current page.

  var myLabel = "Foo", // change to label
        myPage = app.properties.activeWindow && app.activeWindow.activePage,
        myTextFrames = myPage.textFrames.everyItem().getElements().slice(0),
        l = myTextFrames.length,
        myVariable
  
  while (l--) {
      if (myTextFrames[l].label != myLabel) continue;
      myVariable = myTextFrames[l].contents;
      break; // presuming there's only one "Foo" labeled frame on the page
      // Otherwise you'll nead an array
      }
  
  alert(myVariable)
  

  Trevor

• How to activate the filtering and sorting in a dynamic array

  Hello everyone,
  I'm going crazy with this problem, hope that someone could help me! I have a dynamic array based on a view that changes its application programmatically. For its dynamic nature, I did in my mainPageDef no reference to the attributes of the table:
  
  <>executables
  < variableIterator id = "variables" / >
  < iterator lie = "DLOV_1" RangeSize = "25".
  DataControl = "DLOV_AppModuleDataControl" id = "DLOV_1Iterator".
  R = "always" Sortable = "true" / >
  < / executables >
  < links >
  < Tree IterBinding = "DLOV_1Iterator" id = "DLOV_1" >
  < nodeDefinition Name = "DLOV_10" >
  < / nodeDefinition >
  < / tree >
  < / links >
  
  
  Jspx page I have:
  
  
  < af:table value = "#{bindings." DLOV_1.collectionModel}.
  var = "row".
  lines = ' #{bindings. " DLOV_1.rangeSize}.
  emptyText = "#{bindings." DLOV_1.viewable? "{'No data to display.': 'Access Denied.'}".
  fetchSize = "#{bindings." DLOV_1.rangeSize}.
  rowBandingInterval = '0 '.
  filterVisible = "true" varStatus = "vs."
  selectedRowKeys = ' #{bindings. " DLOV_1.collectionModel.selectedRow}.
  selectionListener = "#{bindings." DLOV_1.collectionModel.makeCurrent}.
  rowSelection = "single" id = "t1" >
  < af:forEach elements = "#{bindings." DLOV_1Iterator.attributeDefs}.
  var = 'def' >
  < af:column headerText = "#{def.name} '"
  sortable = "true" id = "c1".
  filterable = 'true '.
  filterFeatures = "caseInsensitive" >
  < af:outputText value = "#{row [def.name]}" "
  ID = "ot1" / >
  < / af:column >
  < / af:forEach >
  < / af:table >
  
  
  which works really well with the code of my bean (the one who changes the query and execute it):
  
  
  If (am.findViewObject ("DLOV_1")! = null) {}
  am.findViewObject("DLOV_1").remove ();
  System.out.println ("off");
  }
  ViewObjectImpl dLovView = (ViewObjectImpl) am.createViewObjectFromQueryStmt ("DLOV_1", (String) qryTxt.getValue ());
  dLovView.executeQuery ();
  AdfFacesContext.getCurrentInstance () .addPartialTarget (lovTable);
  
  
  Now the problem is I can't get the functionality of filtering and sorting of column. How can I achieve that? I noticed that you define the defName in the nodeDefinition to provide a 'model', but I can't do that because my table does not have a fixed structure.
  Is there a solution?
  Thanks in advance!

  You can pass me the sample, will take a look - use the same mail id that you will find my profile

• How to change the display of a dynamic array limits?

  Hi people,

  I use DW CS4 and PHP. I have a php page with a dynamic array and the repeating region that I built for my client. This table lists our list any active member. Initially, I built the PivotTable to display records that only 50 to 300 + records because both made a long page. My client wants to now all records on a single page, because he does not like to click on through the first Recordset Paging - next - previous - last list to find who he is looking for. I tried to change the behaviour of repeat in all records (rather only 50) region, but it still shows that 50. I don't know that it is because initially when I set up the dynamic table, I limited to 50 it. Is there an easy way to change the dynamic array of 50 to all records, without rebuilding the whole page? I have looked in many places and cannot find a way to change this. Thanks for your help,

  Gail

  If the page in question is - apart from the table - not too complex, the probably simplest is to...

  (a) copy the table * code * to the Clipboard and paste it in, say, a simple text editor such as Notepad

  (b) to rename the current document to something else for backup purposes

  (c) create a new document and insert a simple recordset (must be named identically to allow an easy transition)

  (d) to paste the code in the table in here