Pages and chapter markers

Similar Questions

• Compressor can import markers .wav or .txt cue lists and convert them to chapter markers?

  A simple...

  Compressor can import markers .wav or .txt cue lists and convert them to chapter markers?

  Best

  T

  See this support document and go where it says "Add markers using a list of chapter markers":

  Compressor 4: Add markers

  https://support.Apple.com/kb/PH21224

• How to import Final Cut Pro video in still and still get the chapter markers?

  I want to burn a DVD of a Final Cut Pro video.  How can I import in again and still get the chapter markers?

  I imported as a timeline, but the chapter markers do not show

  You also try and put a candle Chevy in a Ford engine?

  As far as I know, there is no interoperability between still (and program from Adobe) and FCP (Apple program)

• Avoid problems common with headers paging and chapter pages

  I'm carrying a book and I have headers running on the A-master to show the left of book title and the title of the right chapter. Chapter pages themselves I want to remove the header, so I have a B-Master even A-master but the topics in the topic. That works fine except that I'm still working on a layout that will affect the paging and if all this shifts the masters will be out of sync from the pages of chapter and I; "he's had to go through manually and fix them - is there a way to avoid this? (IE tie / script it so that any page with a "chapter" on that style has applied B-Master of another A-master?)

  M

  Then you are probably best to wait until the book is finished, then assign then masters or substitute and delete headers right there.

• in the film in the Ipad chapter markers

  Is it possible to add to a video chapter markers installed in Folio tat overlays so when read on an Ipad we can use these markers as a marker for links to other pages of information or other videos to increase the info on this particular chapter.

  I tried to add markers to the Prime Minister but could not bring him to be seen when the video has been held back in InDesign and Folio overlays?

  This is not supported by DPS.

  Neil

• Generate the table of contents with chapter markers?

  It has been a while since I had to install and create a table of contents for a long document of single file, but I'm sure that I created TOCs in this way in the past. Then, why the text in the Section markers will appear in the table of contents? It is even possible to generate a table of contents that contains text of article marker?

  I use InDesign CS5 in Windows. I have a file single document I'm trying to generate a table of contents for. I designed a 16-page manual in an inDesign file that includes a cover page, table of contents page and seven "chapters."

  I created a separate section for each 'chapter' and used Chapter markers in the top of the page master for chapter names. It's something I did in the past of syntactically long documents containing several chapters.

  I put the first page of each 'chapter' as a new Section on the Pages panel. In numbering and Section Options for each page, I checked the Section getting started, Automatic Page numbering, the Style of Page numbering: 1,2,3,4... and in Section marker: I put the name of 'chapter' in the text box.

  

  I've set up paragraph and character Styles and has used throughout my document. When I put in place the table of contents I created everything correctly, including a heading style that I used for all the sub lines in my file and my style of Section marker for chapter names.

  

  When I insert the table of contents, generate headers sub with their page numbers, but the titles of the chapters which are chapter markers do not generate. Am I missing something or is it still possible to enter the text of chapter markers in a table of contents? I'm sure that he's worked in the past. Can anyone offer a solution for this?

  Thank you

  Kat

  Looks like the markers section present only in the table of contents if they are on a document page. Try manually to the substitution of the frame.

• You can add chapter markers... I know they went from iMovie 10.1

  Very frustrated with the iMovie 'upgrade', but I have already imported and edited the video so new that it is not possible to go back to the old backups. My frustration is the lack of chapter markers. If I want to burn to a DVD or look in other software, I would that the ability to jump quickly between specific scenes in a video of 1 h. For example, I have a video of dozens of swimming events. My girls love to watch their races to watch their technique, and they often want to attend a race several times given. I just want to be able to hit 'new chapter' and be at the start of a particular race. Since iMovie 10.1 can no longer do this, I'm looking for other solutions... without having to invest hundreds. I tried to import into GarageBand (an older version) and I think this might work (my version of exports still GB to iDVD), but the timeline for Go is kind of awkward to find exactly where I want to place markers. So, although I might end up here, I hope to other solutions.

  I found Subler.  I have tested it on a file exported .mp4 but it seems to work well (even after importing to iDVD).

• For use in VLC chapter markers

  I have a video I play in VLC and want to use the next / previous buttons, but chapter markers are not displayed in VLC, is anyway to do this?

  Markers used in the first are still not for other devices.

  Might need to read the manual of vlc or go on their forum.

• Seeing no chapter markers in Encore CS6.

  I created Chapter (not the generic markers) in first Pro CC markers, and given each of them the names (no comment), that I confirmed arise as hover text in the timeline of the PrP.  Now, when I tried to export a simple sequence with this chapter, as MPEG-2/DVD markers, make chapter markers appear when I "import calendar" in Encore CS6.  However, when I export my whole project, which nested sequences (not sure if it matters), the base clips which have chapter markers... I have him not see my chapter markers in Encore.  What is a limit?  I mean, in the PrP chapter markers must be set to the shallower (less nested) level of the timeline to export?

  I looked around forums some, and what little I found spans a few versions of again, with some changes to the UI complications.  One, in Encore CS4, advised the "make sure you have 'Include Source XMP data' selected,'... but I can't find such an option (in my most recent software).  The closest thing is the button of "metadata" at the bottom of the Adobe Media Encoder, which opens a panel with a drop down (top-left) to "export options", including "Create file" or "embed in the output file. Unfortunately, the latter is gray.  I understand that certain types of format do not xmp data to be shipped, but I thought that MPEG-2/DVD enabled him.  Nevertheless, the online tutorials I found say that Encore CS6 is smart enough to pick the file with data xmp (chapter markers).  With this in mind, I was careful to not rename or move the file .xmp of which created Adobe Media Encoder.

  Any thoughts?

  Thank you.

  It seems that the problem is nested sequences.

  Fix. Markers are only exported to the exported sequence.

  is there any fix that doesn't involve respotting and retype it all markers from ~ 40 to the timeline root manually?

  Not that I know of.

• Export of in CC2015 chapter markers

  I spent all day preparing sequences of the Organization for creating files of DVD in CS6 again by creating chapter markers in the sequences of the body. It is a practice that I used time and again in previous versions of the body, but I can't get the chapter markers for import into even this go round. With zero information in chapter import files. Is this a bug with the new software, or am I missing something? I specifically selected the "Chapter marker" option when creating markers. I would not lose a day of work, any input would be greatly appreciated.

  Thank you!

  As well as MPEG2-DVD preset, I thought by selecting "Metadata" (which are at the bottom of the export settings) next to the export queue cancel

  without selecting metadata stays black after selecting it metadata a 'blue line' under

  If metadata is selected, a window of export of metadata. I just said OK, once I see the check mark next to "Export Master speech Track and markers"

  This is the desired sequence markers. Yes, chapter markers. Fill out their names in first and were still also use chapter names.

• How can I update my DVD .xmp without chapter markers - export all!

  I use first Pro CC to create a DVD mpeg-2. I already exported the DVD, but I forgot to create my chapter markers. I have now taken up in first and added my markers, so is it possible to export the metadata on its own and attach it to the DVD mpeg2 files. I only need to edit the metadata, I don't want to re - export the entire project! (who has had 30 hours :/) Thank you!

  If you still use to make the dvd, you can add markers there or you might be able to export only the audio first and may have markers. If this does not work, first duplicate your sequence and replace it all with the same length of black video, export to mpeg-2 dvd, chose the faster settings, something like 7. CBR is a new timeline with markers in the still of this export, then just replace the black with the correct video.

• Sequences can inherit the nested sequences chapter markers?

  I am in my project of edition about 2 hours of video. For that things remain manageable and being able to do fast makes it partial, I have divided the project into several parts. Each part is edited in a clean sequence. Finally I combine parts by adding them in the form of sequences embedded in my master sequence. The problem with this approach is that I can't get the creation to inherit the nested sequences chapter markers. For example, in my 03 sequence, I put a chapter marker.

  

  When I put this sequence in my master sequence, chapter markers will not appear and it is also not be counted when I export the main movie to a DVD:

  

  I could of course place the markers on the main sequence, but I would rather their place in the sequence of the child for two reasons:

  • Markers and edited scenes would be in one place.
  • If I choose to re - edit some parts of the sequence, I won't forget to update the position of the mark.

  I'd love to hear your ideas on how I could do this. If my work flow is poor/ineffective, I'd love to hear about that, too

  You can do all your editing in different sequences and bring them a master.

  But I leave the markers to the end of the Master.

  You want to export a DVD or BD?

• Ripple delete and move markers too?

  I am looking for a way to remove the ripple this gap so as to move with her chapter markers. Is it possible to define the editing until the beginning clips and the timeline from scratch? Seems there used to be a way to do this, but I can't.

  Menu marker > ripple sequence markers

• How to make a table of contents to display the chapter number and chapter text together

  I'm working on 11 of FrameMaker. How can I get my Table of contents (TOC) to display the chapter number and chapter title on one line. My chapter titles have the chapter number and chapter title on two lines, two centered at the top of a new page. I wish that my OCD to pick the chapter number and chapter name on one line not two. Thank you.

  If you'v created the table of contents with activation of hyperlinks (default) setting, and then simply hold the CTRL + alt keys and click on empty entries in your TOC file. FM will open the file containing the entrry and jump to the correct section.

• set as default chapter markers

  I see another change in the ORGANIZATION CS6 Cloud.  I see the button of "marker" on the timeline, but no 'chapter marker"I double click on the marker and can change to a chapter marker.  It's SLOW.  Can I change the default setting to maker chapter rather than marker?

  You can set a shortcut to add chapter markers.  As M is the ordinary marker, I use SHIFT + M to the chapters.