Pages BSD system calls and functions in the C library is missing

Similar Questions

• Calling a function in the HTML window that course is located inside - 8 Captivate

  Hello

  I scoured the forums to answer this but still have developed in white.

  Our LMS is launching a course in a pop-up window and inside that the Captivate output file .htm lies.

  Currently this pop-up window has a button that performs a function.  The problem is this button is rather unsightly sitting above the price in the HTML window and I wish I could call this function inside the Captivate course itself.

  The function is called closeSCOContent() and it closes the window of course but basically sends the user to a page of comments.

  So, basically is it possible to call this function using the Javascript function in Captivate 8?

  I hope that I have explained that sufficient

  Thank you very much!

  You should be able to call the function, but you would need to know where he is regarding parents/children/opener. Looks like there's frameset inside the popup.

• Calling a function in the main sequence of a loaded swf file

  I know this is probably a very basic question, but I loaded a SWF file in another film. Now, I want to call a function in the main SWF file. Is it possible to do? Otherwise, I have a custom class where I could put the function, but I was not able to understand how to call it from the SWF loaded either. Can I somehow associate the class with the main movie, or...?

  Nevermind - I did something very stupid and was not calling the function as a method of a clip. I was just calling checkTarget (event) and not event.currentTarget.checkTarget (event); that seems to work.

• call a function in the hull of the SWF to a SWF imported

  We have set flash up as a shell to retrieve data from the lesson in XML and display image by image.
  
  We import SWF files when the XML code that tells it to affix the frame.
  
  How can I get the SWF file imported to call a function in the hull...
  
  basically a button or movie clip in swf call imported the function "gotoNextFrame()" in the hull.

  We found an easier way to 'bit' if anyone is interested... We have an eventlistner added to the charger to assign an event in the swf file that is imported:

  flashLoader.contentLoaderInfo.addEventListener (Event.COMPLETE, addEventHandlers);

  then when its done, it adds event listeners and calls our function "goNextFrame" (then it clears when its removed from the scene):

  function addEventHandlers(event:Event):void
  {

  var swfMC:MovieClip = event.target.content as MovieClip;

  swfMC.addEventListener ("NextFrame", goNextFrame);
  swfMC.addEventListener ("PreviousFrame", goPrevFrame);
  swfMC.addEventListener (Event.REMOVED_FROM_STAGE, clearEventListeners);

  }

  Then in the swf file that will be imported, its real simple:

  next_btn.addEventListener (MouseEvent.CLICK, MoveToNextFrame);
  prev_btn.addEventListener (MouseEvent.CLICK, MoveToPreviousFrame);

  function MoveToNextFrame(e:MouseEvent):void
  {
  dispatchEvent (new Event ("NextFrame"));
  }

  function MoveToPreviousFrame(e:MouseEvent):void
  {
  dispatchEvent (new Event ("PreviousFrame"));
  }

• Call a function within the same CFC component

  Hello
  / * Niewbie Question * /.
  I have a strange problem. When I try to call one function on the other in the same CFC component, I get an error named: "Entity has incorrect type to be called as a function."
  I looked on many forums and searched in Google groups. I have yet found a work around for this problem.
  I thought I did caution o not use twice the same name...
  Can someone tell me what I did wrong?
  
  My sample code to reproduce this error is included
  
  The full error message is:
  Entity is of the wrong type to be called as a function.
  The symbol you provided superfunction is not the name of a function.
  
  The error occurred in C:\ColdFusion8\wwwroot\admin\_components\test.cfc: line 6
  
  4: < cfinvoke
  5: method = "superfunction".
  6: returnVariable = "myReturn" >
  7: < / cfinvoke >
  8: < cfset some_text = myReturn >
  

  OK, solved with all your advice!

  A big thank you to everyone

  Here is the final code for others...

• Whenever someone calls, I'm not able to take the call and cannot see the identification of the appellant as well. However, he gets noticed in the missed calls.

  I have an iphone 6. Whenever someone calls, I'm not able to take the call and cannot see the identification of the appellant as well. However, he gets noticed in the missed calls. Help, please.

  It is a problem of carrier - I would like to talk with my carrier

  Your signal may be weak or you can be in a dead zone - or there may be interference - those that can cause the call to go directly to voicemail

• Why have I not the calendar option checking / unchecking at two locations in the Prefs system, iCloud and accounts on the Internet?

  Why have I not the calendar option checking / unchecking at two locations in the Prefs system, iCloud and accounts on the Internet?

  Why have I not 2 switches that control the same light fixture in my living room? It's the way it was designed.

• Whenever I start my computer with Windows XP, I get the message "it is necessary to restart your computer. If I select 'YES', the system restarts and I get the same message.

  Original title: "RESTART YOUR COMPUTER IS REQUIRED" MESSAGE LOOP

  Whenever I start my computer with Windows XP, I get the message "it is necessary to restart your computer.  If I select 'YES', the system restarts and I get the same message.  Always shut up if I keep you select 'YES '.  I can work around the problem by choosing 'NO '.  How can I avoid that this message that appears constantly when I start the computer?

  http://forums.techarena.in/Windows-Update/1095335.htm

  read the above and follow the tips on adobe updater and maybe this will help.

  If this is not the case after return and include information about your machine, svc pk and IE #.

• Can I add a new page to both phone and desktop in the same respective location? Is only possible manually?

  It seems that, once you create your phone site, a from there, when I add a new page for a layout or on the other, the command ' Page/go to even ' struggles. Can I create a new page and have it automatically create a page space reserved on the alternative format/site plan?

  Hello

  To respond to your request, I'm afraid that you can't add a new page to both phone and desktop in the same respective location. You must manually do the same thing.

• I deleted pages from a pdf and accidentally saved the wrong version.  Can I recover the lost pages?

  I accidentally deleted the bad pages to a pdf and then save the new document.  How can I get the previous document.  With the help of Adobe Acrobat Pro and the Mavericks.

  Thank you

  I hope that you have a copy backup of the file somewhere, because you do not have

  have many other options...

• Can I call a function using the array index?

  I defined a table that stores the name of the function, like this:

  var aresetButtonTop:Array = new Array(resetTop1,resetTop2,resetTop3,resetTop4,resetTop5);

  Then I have a button named "btnresetTop" which, once clicked will be called one of the five functions stored in the array (aresetButtonTop) above. Functions are called at runtime depending on certain conditions. I need to figure out how I can call these functions using the array index. I use the following code to call the function. The value of i has already been calculated.

  
  

  btnresetTop.addEventListener (MouseEvent.CLICK, aresetButtonTop [i]);

  After doing this, I get the following error when I click on the button:

  TypeError: Error #2007: parameter listener must be non-null.
  at flash.events::EventDispatcher/addEventListener()
  at gallerytest_fla::MainTimeline/thumbTopClick()

  Note: thumbTopClick() is a function within which all these codes are written.

  I need to know if it is posible in AS3 to call a function name using array index or not. If so, could you afford ehelp me out.

  You can certainly do.

  In your case, it looks like i is out of range. Show your loop.

• When I turn on the system of its display in the moniter as NTLDR missing.please give me the solution for this problem.

  When I turn on the system of his displayiing on the moniter as NTLDR missing. Please give me the solution for this problem

  Hello

  NTLDR is not used for installation of Vista, it's a vestige of WinXP / 2K. If it is listed as "missing", then your boot sector is damaged and must be repaired. The steps are described here: http://support.microsoft.com/default.aspx/kb/927392?p=1

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Then I reinstalled FCPX and some how the scale option is missing in the effects window. Can anyone help?

  Then I reinstalled FCPX and some how the scale option is missing in the effects window. Can anyone help?

  Try resetting your preferences. Organize your Opt - Cmd launches the application. Post screen shots of what you see.

• Hard drive partitioned using its missing data after restarting the system, sharing and management of the computer

  Hello

  I have a Toshiba Satellite with Vista and since my laptop came with only a single 250 GB, i.e. C:\ partition I tried to partition more than I did the following, I had about 90 GB of data to start with which I transferred to a portable hard drive then:

  Panel--> Admin Tools--> computer management--> management disk storage--> right click C:\ Drive and reduce volume--> it showed only 50 GB of space heat shrink and I created a new volume with this space (F:\ 50 GB)--> transferred all the files to the new 50 GB portable HD space F:\ and remaining 40 GB on the drive C:\

  When I started my computer after a few hours, the new partition F:\ was missing! In addition, there was only the C:\ drive of origin with 40 GB data that I had transferred + 45 GB of data I think it was there previously because the installed files.

  C:\ was so now 40 + 45 = 85 GB without a trace of the 50 GB of data on the new partition I created!

  I had recovered my system to a day before before I did it, it could be the reason? Now, when I try to go to System Recovery it does me not an option for a restoration of watch system.

  To be sure, I now have a backup of the 40 GB of data from the C: drive, but I lost the data of 50 GB of the new partition, and since I have not written new data on the drive is possible that it's still there?

  When I try to search for some files I know research shows me the name of the file, but the file does not open, and the location of the file shows that it is not accessible.

  Kindly advise me on what can be done given that 50 GB of data is really important.

  Thank you

  Go to disk management and open it in full screen and then press the PrtScr button.  Go to start / all programs / Accessories / Paint and open the program.  Go to Edition and click on paste.  Then go to file and click on save as and select a .jpg file type and call the disk management and save it to your desktop.

  Then go to http://skydrive.live.com/ (you will have to perhaps sign up and maybe download some programs, but this will give you a free online place where you can store files for others.  Once the page to the top, click on add files and navigate to the file you just save it on your desktop and add it to one of the folders (I suggest the Public folder).  Once it clicked, and information about it will appear at the bottom right, including where exactly the file.  Copy this URL and include it in your next post.  I would like to see what looks like disk management without asking a thousand questions to describe everythhing for me.

  If you did a restore of the system already on the previous day, there is probably no new restore points created since then, so there is no option to do a system restore.  In addition, a system restore would not solve this problem - this is way beyond its capabiliities.

  Download the free EASUS Partition Manager: http://www.partition-tool.com/ and run it to scan your drive and see if it finds anything Disk Manager can not - it "s possible he can pick up our lost F:\ partition or unidentified space which could be this partition but not correctly identified.  In a same, t I would like to see if it detects anything useful (and it can also be useful the fixing of the problem if we can find it).  Moreover, the total space of the C:\ drive is now is what it was before you have shrunk or it it showing the size reduction that you can expect if the new volume had actually been created?  Let me know what you find if anything.

  Right-click on your CD-ROM drive, and then click on change drive letter and paths.  Click on edit and then right click on the drop box for the available letters.  F shows as available or is missing in the list?  Leave it (don't change anything in reality - I just wanted to see if F has shown as available since if it was assigned (such as C: is assigned) should not be shown at the top on the list.)  I would like to know if he was there.

  I hope this helps or at least gives us some clues on how to solve the problem (whatever it is).   Keep me informed.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Camera to call and wait for the photo?

  Hello world

  First post on these forums, but I've been lurking here for a while. I have a simple question that can have a simple answer, and I hope someone here can enlighten us on this issue.

  I'm looking to call the camera of my application, I can do it quite easily. In addition, I have a listener of filesystem implemented seeking a .jpg file saved after that the user takes a photo. Here are the relevant lines of code (more or less):

  Listener = new FileSystemJournalListener() {}

  public void fileJournalChanged() {}

  Long USN = FileSystemJournal.getNextUSN ();

  for (long I = USN - 1; i > = lastUSN; i--) {}

  Entry FileSystemJournalEntry = FileSystemJournal.getEntry (i);

  If (input! = null) {}

  If (entry.getEvent () == FileSystemJournalEntry.FILE_ADDED: entry.getEvent () == FileSystemJournalEntry.FILE_CHANGED: entry.getEvent () == FileSystemJournalEntry.FILE_RENAMED) {}

  If (entry.getPath () .indexOf (".jpg")! = - 1) {}

  lastUSN = USN;

  photoPath = entry.getPath ();

  }

  }

  }

  }

  lastUSN = USN;

  }

  }

  UiApplication.getUiApplication () .addFileSystemJournalListener (listener);

  Invoke.invokeApplication (Invoke.APP_TYPE_CAMERA, new CameraArguments());

  My problem is I want to access and extract the image from the camera in a way series application, then I would like my request for locking/blocking/wait until what the auditor has identified a new image file. I believe that this is possible, but I'm not familiar with how to do it. In my debugging experience, at least on the Simulator, invokeApplication is threaded (asynchronous) and my request is still ongoing in the background, even if the camera application is active and on the foreground. I tried to add a dummy while loop after the call to Invoke that checks whether my application is in the foreground (using isForeground) but has not lead me on the path.

  I'm working with JDE 4.6.1 and 4.7. Any help would be greatly appreciated!

  Best,

  Wire update

  Hi Peter,.

  Thanks again for your response. I'm really not in one of the videos/images . You can always check my github profile (www.github.com/filmaj), which also contains my range of PhoneGap - it contains the latest code of BlackBerry for our project. In addition, PhoneGap is completely open source and under license by virtue of the MIT, which is pretty liberal, so feel free to grab the code and play with it / use it at your leisure!

  Thanks for the info on the thread of events, which is very insightful. And Yes, almost all PhoneGap runs on the event Thread (except for the recovery of the resource - two resources the application external or local-unit, i.e. the pages html, css, js, images, etc.). It is indeed a difficult situation, but I think I have the solution, but it does not actually the code Java of BlackBerry. I think I can actually solve this problem as soon as the end of JavaScript.

  For context, here's a brief overview / example of how PhoneGap works on a BlackBerry:

  1. developer making an app with PhoneGap called something like navigator.camera.getPicture (success, failure) of JavaScript on the access to its Web site, with the 'success' and 'failure' based on the handles to reminders for image retrieval success or failure, respectively.

  2 some PhoneGap JavaScript wrapper code sets a cookie (document.cookie = "foobar"-call with a particular PhoneGap message format, in this case for the camera.)

  3. We then carry on native code of BlackBerry. Object BrowserField, that displays web application pages and executes the JavaScript Shell, then intercepts this cookie-setting event (via the eventOccured to the RenderingApplication method and Event.EVENT_SET_HTTP_COOKIE event type) and numbers which native device to recover/call feature.

  4. the specific device feature is called and returns a string from a combination of code JavaScript logic and JSON (code object for data transport representation). This string is stored in a Java vector, which is a member of class PhoneGap.

  5. at this point, the cookie-setting event method has finished running, execution returns to the wrapper of PhoneGap JavaScript function. Now, we get the contents of JS document.cookie. As done previously, using the same approach, catch us the event "getCookie" and fill it with the contents of the Java vector we populated earlier. It finally passed into the web page's JavaScript.

  6 back in the land of JavaScript, the last step is to eval() the contents of the cookie, fill data members and call reminders on the right.

  So my solution is to simply ask document.cookie (and therefore indirectly on the contents of the Java vector election) in a defined - for example, every second - interval instead of immediately after the launch of the functionality of the device and only once. In this way, the app will be keep polling the vector object to the new answers PhoneGap and evaluate constantly.

  In all cases, you can not directly solved my problem, but you led me in the right direction! Congratulations to you, Sir!

  Thanks again,

  Wire update