Hard drive partitioned using its missing data after restarting the system, sharing and management of the computer

Similar Questions

• Color calibration settings reset after restarting the computer

  Hello!
  I had a really hard time with my monitor calibration.
  I will try to describe my problem as simple as possible. I hope that someone will find a solution to this because I just couldn't.

  SYSTEM:
  ASUS N750JV, Intel Core i7, NVIDIA GeForce GT 750 M + Intel HD Graphics 4600 and, of course, Windows 8.

  PROBLEM:
  "Calibrate display" settings change/reset back from each time after restarting the laptop, shut down or put to sleep.

  DESCRIPTION OF THE PROBLEM
  I just can't calibrate my screen. Everything I do just does not work.
  Calibrating monitor in Windows 8 works very well only during the time when I actually do
  But if I restart, stop, or put my laptop to sleep just goes back to normal.

  For example, as a first step, the screen of Loggin on Windows 8 when I start seems calibrated.
  but when I connect I wait 2 seconds or two and all my settings are changed in return.
  I have to recalibrate the screen again and again once and again and again...

  Swear to God that I tried all possible solutions to solve my problem and none of them worked.
  I have read a lot of forums, and I can't find the solution that actually works.
  I did the solution 'Safe mode' , the 'clean boot' solution, in 'color management', I changed the settings (in a way that people who said it should work).
  I've updated all my drivers (my system than the GeForce GT 750 M is up to date). I installed all available updates for Windows 8 (when I check updates, the system tells me there aren't everything and my system is also up-to-date).

  I guess there could be a problem with my graphics card. I know that everyone has had problems these last time with the new update for GeForce, but like I said before, if I have confidence in my laptop then my graphics card is up-to-date.

  It really bothers me. It's annoying and I'm frustrated by that. The worst is that I can't find a solution to this, so I'm really asking for help.
  Thank you!

  Original title: calibration unsolved display problem - Windows 8

  Adeline B, thank you very much for your answer.
  I'm sorry that I have not responded in such a long delay.

  Well, my problem has been resolved. I downloaded my GeForce graphics driver was last updated.
  Now everything works fine.

  • I know that this problem can be irritating. If anyone has the same issue so I recommend you (like everyone else) download of the updated driver for your graphics card.
  • If this does not work, try to calibrate your system using programs/software installed on your computer by your manufacturer. In my case it was splendid ASUS utility. I also used Intel® HD Graphics Control Panel.
  • Another thing is you may think that your system does not calibrate when it actually... made. So what you can do, it's just waiting for the start until your system is finally charge up. In my case, Windows 8 something takes about 10 to 12 seconds, until what it changes all the settings of ' my settings'.»» Then first Windows 8 loads up to original settings (and this is why you find that your screen is not calibrated) but then it loads the calibration settings you make before you restart and all is well.

  I know this sounds so easy is probably not solve anything, but when I had this problem with the calibration I was so irritated by it I wasn't noticing the changes! I'd just instantly to the desktop or control panel configuration, or web and try to solve the problem, without waiting for my system completely load all settings. But... If the wait does not then consult my previous statements.

• El Capitan: macbook pro encryption self started after the update to iTunes on 11/12/16.  After restarting the computer open to grey screen asking if I wanted to use ICloud password or logon password updated.  I don't want / need for encryption I do?

  After update iTunes on 11/12/16 my computer restarted "grey screen" and required a password for encryption.  He encrypted then my MacBook Pro (10.11.2) in addition, the iTunes update has 'lost' My Playlists, and 90% of my purchases.  Apple Care level 2 could not find them!  They appear in my account, but not in my iTunes.

  1 can I fully encrypted computer?  Otherwise how can I UN-encrypt?

  2. How can I get my old, entirely organized iTunes back?

  Thank you

  File Vault encryption is a security feature. Olny you know if you want or need it. I don't use it.

  To remove the see of

  Use FileVault to encrypt the boot on your Mac - Apple Support disk

  You can re-download most of iTunes purchases by:

  Download after purchase from the App Store and iTunes Store iBookstore

  It appears that there is a problem. This happens a few times. If you have a backup yo can restore from the backup

• Cannot start the services automatically after restarting the computer and also unable to define themes.

  Original title: My Services do not start automatically

  I've implemented all Services on 'Automatic', but when I restart the PC, they do not themselves. This is problematic because of the themes won't start not and my PC theme returning to 'classic '. Does anyone else have this problem, if so please help.

  More info, please ask.

  Thanks in advance

  In fact, the problem persisted due to the fact that:

  1 'Windows Cache of police service' was running, so I disabled it.

  2. "Windows Presentation Foundation Font Cache 3.0.0.0" also ran, so I disabled too.

  After disabling these two services, then by restarting the PC, he was back to normal and show to the it's the best.

  For those who need help, these are the instructions.

  Click Start, type "run" in the search box and click Run and enter "services.msc" and click ok. Once you've done that are looking for the two services above, located once double click on the first found, and in the drop-down list next to "Startup Type" choose "disabled", and then click on apply and then ok, do this for the second service also. Once that is finished, restart your PC, and I hope that your problems must be solved.

  Also, I think that it is better to download the "Free Window Registry Repair" of http://download.cnet.com/Free-Window-Registry-Repair/3000-2086_4-10606555.html.

  Install and click on "Full Scan" and after it has completed (this may take a while) click on "Error Correction".

  After all this, your computer must be at its best.

  I hope this helps someone.

  Thanks for all the help.

• Custom printer form disappears after restart the computer.

  Hi, I have a problem when I need to create shape size custom made every day once the computer restarts to print on my matrix printer. description of format custom: 4.5 height 1.5 in. in width.

  My computer running on Windows 7 Professional with the new Panasonic KX-P1121E connected via the USB Port.

  I formatted computer once installed with Trend Micro Antivirus. Is there a solution to the change in the management of printing where new forms can be change to built in either user-defined type? Maybe it'll work?

  I read a lot of discussion and reading forums but no solution. If microsoft is able to help me on this would be much Grateful. thx a lot.

  Hello

   
  When you make these changes?
   
  I suggest you try these methoods and check.
   
  Method 1:
  Change the settings through the application you are trying to print from if you don't need the size for a single project. Change the settings in the section printer and fax devices and printers of method if you need to print a certain size of default letter. I suggest that you try the following steps and check.
  a. click Start, open Control Panel.
  b. open devices and printers.
  c. Select the printer, click the printer server properties.
  d. check to create a form.
  e. to make changes, and then click Save form.
  f. click apply and ok.
  
  Method 2:
  
  I suggest to keep the computer in a clean boot state and check the status of the issue.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.microsoft.com/kb/929135.
  Note: Please see 7 step the computer to a normal startup Dungeon upward after the problem is resolved.

• Writing Excel using activeX - missing data after column IV

  Data size is about 400 (col) x 100 (row), save in excel using ActiveX, it cuts the data only with 256 columns, other IW data... are missed.

  

  How to solve this problem in LabVIEW? I save the file in .xlsx format.

  

  Pls ignore this question because I already solved the problem, thanks to you all!

• Satellite L670 - change of HARD drive partitions

  I just brought a new toshiba laptop Satellite L670.
  I just watched the player and its distribution, but they put the 139g on the d drive,
  Is there anyway I can change this?

  Hello

  How do you change it?
  I put t recommend that before you didn't create a Toshiba Recovery disk!
  You must create this disk to reinstall the OS again in case something goes wrong with the HARD drive partitions

  In General, you can change the size of partitions in Windows 7 disk management.
  To start disk management diskmgmt.msc term use

• After I restart my iMac and double-click on the hard drive, a pop up appears with this message: 'the 'Hard drive' file cannot be opened because you don't have permission to view its contents.'.  What is the problem?

  After I restart my iMac and double-click on the hard drive, a pop up appears with this message: 'the 'Hard drive' file cannot be opened because you don't have permission to view its contents.'.  What is the problem?

  Is the name of an external drive or internal one?

• Is it possible to partition the hard drive by using software like Partition Master, install XP and an earlier version of Office on the new partition?

  Partitioning of a Windows 7 computer

  On a laptop Windows 7 HP, it is possible to partition the hard drive by using software like Partition Master, install XP and an earlier version of Office on the new partition? I know I can run Win7 XP mode, but many prefer a base XP environment. Yes, I have new copies unregistered XP and Office 2003.

  TIA,

  Steve

  Besides Partition Master you can also use Windows 7 "Disk Managment" to shrink the partition of Windows 7, create a new partition of the space "unallocated", and then do a formatting NTFS "Full".

  Installing dual Boot with Windows 7 and XP
  (Read each method in this article and that fits your needs)
  http://www.SevenForums.com/tutorials/8057-dual-boot-installation-Windows-7-XP.html

  EasyBCD allows to appear more user-friendly boot menu:
  http://NeoSmart.NET/DL.php?id=1

  J W Stuart: http://www.pagestart.com

• External hard drive no use / formatting / causing a lot of problems on Windows 8

  Hello, please someone help me! ??

  I just got a new Samsung M3 2 TB external hard drive and I tried running it on my laptop (Windows 8).

  I tried to partition it into two parts, but now everything goes terribly wrong.

  When I connect it via USB, the computer makes a sound of ping and it seems that 2 drives in my computer. He asks automatically format it... and when I start the formatting process (which takes hours)... in the end it gives me an error report saying "format could not be completed successfully."

  Whenever the HARD drive is connected I can not run the disk management tool, because it does not load. I even downloaded the partitioning of the internet tools, but when the HARD drive is connected those just freeze. When the HARD disk is not connected, disk management and all the partitioning tools work correctly.

  It's as if the HARD drive takes over from the computer in a way since I can't even make a stop down with it connected. There is no way that I can remove it without risk either. Also sometimes it freezes my computer and the screen is blank. So I have to force my PC off.

  It's really driving me crazy. Please can someone advise me on how to solve this problem.

  I don't have access to the other PC to see if it works well on them. I really need to get to this sorting.

  Hello Dezrtroze,

  Thanks for your reply, appreciate the time taken by us keep up to date on the State of the question.

  1. You are able to open the command prompt when the external HARD disk is connected?

  Keep the external hard drive connected and put the computer to boot, check if it makes a difference.

  Also, check if you are able to open command prompt when the device is connected, if so, to run the check suggested such disk in method 3 above.

  On addition to that, you can also run /Scan research on CFS to check any file system corruption and repair it if found any.

  The command sfc/scannow (System File Checker) analyses all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  Use the System File Checker tool to troubleshoot missing or corrupted system files.
  http://support.Microsoft.com/kb/929833/en-us

  Please reply with the results, we will be happy to help you.
  

• Satellite P850 138 - a non-visible memory and no HARD drive partition

  Hello

  I recently bought a Satellite P850 138 and loading up, I noticed that when that card said she had 640Go hard drive but mine is only showing the 570 GB and off that 540 GB available. on other computers laptop toshiba Ive got theres usually a partition, so I guess this must be why theres missing 100 GB.

  But when I chose to view all folders of that backup partition has not always shown. Is it a fault with the laptop or is the partition hidden for just the idiots like me can not messing around with it?

  The laptop was one given to nine and it works fine just worried that if I need to format the laptop and it reboot patients have problems and im starting to think it might be the wrong decision when buying a used laptop.
  Help, please!

  > it had 640 GB hard drive, but mine shows only 570 GB

  The point is that your HARD drive has 3 partitions.
  (1) small hidden partition that contains the Windows 7 repair files
  (2) C partition for the system
  (3) D partition for files image of Toshiba

  So don t be worried, everything is ok.

• Satellite P750 PSAY1A: how to create the recovery Toshiba on the new HARD drive partition

  Hello

  I have an old Toshiba Satellite P750 (PSAY1A-01Y022). I just upgraded my memory from 4 GB to 8 GB and am preparing to take my 500 GB HARD drive 1 TB. I had to order the disk online and wait to happen.

  I always try to understand how to create the arrival of my new HARD drive Toshiba Recovery Partition. I do the same thing for an old book, I handled based on something similar to it's original factory State.

  I have reflected on the recovery partition, but does not know how it was created. It is not NTFS. Does anyone have experience in the creation of a Toshiba Recovery on a new HARD drive Partition?

  And the help is very appreciated.

  Thanks and regards,
  Dinesh

  Recovery partition can be created when you use the original Toshiba Recovery disk and install recovery image. Before the partitions to boot OS install will be automatically created, recovery image copied on a recovery and then partition as last step recovery image installation starts.

  A sort of migration of files from one to the other HARD disk is not solution.

  Only for laptop with factory will work and the usable recovery partition.

• external hard drive partition in disk utility impossible

  on El Capitan, disk utility does not a new external hard drive partitioning.

  When is this corrected?  Is there a work-around.

  With I TB seagate drive and I cannot partition?  It is not useful.

  Marilyn

  Mac mini end of 2014 2.6 Ghz Intel core i 5

  8GB memory

  El Capitan

  Of course, it does.

  Select the drive:

  

  Set how many partitions:

  

  Click on the Add [+] button once for each partition that you want to add. You can set the size using the size field.

  Before you start to complain about something, it would be wise to get your facts straight.

• Can I use the disk utility on an external hard drive Mac os 10.6.8 to repair the drive on my macbook pro running mac os 10.7.5?

  Can I use the disk utility on an external hard drive Mac os 10.6.8 to repair the drive on my macbook pro running mac os 10.7.5?  My Macbook Pro does not start after that I upgraded to mac os 10.6.8 Lion and I have a bootable backup just before the upgrade.

  OS X: on OS X Recovery - Apple Support

• Cannot take possession of the hard drive Partition

  I have a partition on my hard drive to store media. OS is XP home SP3. For some reason, I didn't have full access to certain folders on the partition so I tried to change the permissions for the entire score. I don't remember exactly what I did, but the main thing is that I have more access to the root of the partition. (I can always access all files using the file Explorer). I tried to appropriate the partition via the safe mode and the administrator account, but it won't allow me to take this way. I also tried to merge with the c drive partition using partition magic, but I had an error half way through the process. I suppose that the permissions would not happen. I read on the internet that "you can always take ownership' and I wonder what I'm doing wrong.

  Can someone help me?

  Manually apply permissions to a file or folder, follow these steps. Manually apply permissions, it's something that only advanced users should do because you could end up with unexpected results.

  1. right click on the file or folder and then clickProperties.

  2. click on the tab Security and then clickchange.

  3. If you want to set permissions for a user who is not listed undergroup or user names, click Add, type everyone in the name of the user or group, clickOK, select permissions and then click OK.

  For more information, visit the below mentioned link:

  http://Windows.Microsoft.com/en-us/Windows7/what-to-know-before-applying-permissions-to-a-file-or-folder

  You can also check out the link below.

  http://Windows.Microsoft.com/en-us/Windows7/what-are-permissions

  See the answer of Alex B-

  http://www.Vistax64.com/Vista-General/118340-folder-access-denied-unable-display-current-owner.html