Pages displayed in the wrong order in two places

Similar Questions

• My photos are displayed in the wrong order

  In the view of pictures several pictures not displayed in chronological order of wright. A few photos (usually by iPhones) are in the wrong place. The problem usually occurs between different types of cameras.

  There is not a problem of time in the metadata of photos, I already check it. Photos I take by mourning appears by the photos of the evening.

  I can not solve, and it drives me crazy, please help!

  The problem usually occurs between different types of cameras.

  You import the iPhone photos and pictures of other devices at the same time? If you have travelled abroad, it can be a time zone problem, even if your device has been set to the same time zone as your iPhone.

  The problem is, if you import pictures since a camera, the Photos app card does not know the time zone, the photos were taken.  If the timestamp of the date of capture of the photo say 07:00, and you took the photo at 07:00 in Paris, europe, but the import to your Mac after returning to San Francisco, Photos will be the 07:00 capture date time hour and not European Middle Pacific from 07:00. Photos of the iPhone may have been imported by photo streams while staying in Paris and the zone will be treated correctly as MEST.

  In order to check the time zones.

  Select one of the iPhone photos and use "Image > setting Date and Time.  The background to set Date and time control panel will show you the time zone that is used for the photo.

  Compare this to the time zone used by the others pictures of the camera.

  

  You can correct time zones by collecting all the photos taken with the camera of sam in a smart album (file > new Smart album: camera model is...) ». Then select all the photos in that album and "Image > setting Date and Time" allows you to change the time zone. This causes the timestamp by the zone allocation out of the game. So, if you want to keep the character of the tie as he is, back the "Adjusted" to the original time, but with the time zone time schedule differnet.

• What should I do when iTunes post TV episodes in the wrong order

  I know it seems like an easy task. But what I do when iTunes TV post TV episodes in the wrong order.  I know that this seems to be a first world problem of the same (and it is) but showing bad episodes out of order is so infuriating.  And I paid $ first world over it.  Apple iTunes Australia displayed the 6 episodes of the ITV television series "Lewis" - twice MORE than two episodes 5 and 6.  I know now who is the murderer - I don't know who was murdered. I paid for the series. And I paid for it in the right order.  And... I saved these episodes so that I could enjoy together.  Now my night was ruined.  And you are right - no one died (except in the series, of course), but I don't want to let this pass.  The issue of small things. My annoyance issues!. He does.  And I paid for a product that I did not.  I called Apple support, not because personally, I want to get repair, but because no one should have to have the same experience that I had, and it should fix it, quickly, not in another 24 or 48 hours when someone (for the content provider fix it because according to apple, it's their fault) gets finally around him. When is watching a murder mystery - when the murder is solved before the murder.  VERY ANNOYING. I'm certainly not alone?

  You can try to contact iTunes Support via https://ssl.apple.com/emea/support/itunes/contact.html

  Or leave comments via http://www.apple.com/feedback/

  Or contact the TV company/holder of rights

• SMS messages that appear in the wrong order

  I've had this phone for 1 week verizon's version now, and from the beginning I was using Message + for texting. Since yesterday I have SMS messages or send/recieve began to appear in the wrong order. For example, USUALLY the person who finally got a text Message from their conversation thread is displayed at the top of the list. Now, it's not happeneing. In addition, in a conversation thread most recent SMS sent/received message does not appear in consecutive order. Rather, older messages (from yesterday) will appear at the bottom, and to see the latest messages sent/received I need to scroll to the top of the older posts. Why my texts appear without all of a sudden? Any ideas?

  Message + is not an app Sony stock so if you have a problem with it either to your network or the developer of the game store for example to bring that to their attention

• Software Adobe reader prints multiple copies of documents in the wrong order: 11 22 33 instead of 123 123

  When you print multiple copies of the same document, printing output is always Page 1 one on the other, the whole, Page 2 stacked ETC. Example: Print 5 copies of a 3 page document, it will come out as 11111 22222 33333 instead of 12345 12345 12345, this has been the case with reading 8-11 and also DC

  Hi Vanessa,

  Your printer can sort multiple copy tasks. For example, if you print two copies of a three-page document and you choose not to collect them, the pages printed in the following order: 1, 1, 2, 2, 3, 3.

  Make sure that you check the mark before printing.

  

  Let me know if you are still having a problem.

  Kind regards

  Nicos

• How can I disable the newtab most used feature display sites. I want the new tab to open the page displayed in the newtab:url in the topic: function config

  How can I disable the newtab most used feature display sites. I want the new tab to open the page displayed in the newtab:url in the topic: function config

  41 of Firefox is no longer uses the browser.newtab.url setting in about: config because he was constantly attacked by malware. From 41 of Firefox, you need an add-on to change the new tab page.

  Here are a few options (I'm learning more all the time):

  • If you are already using the extension classic restaurateur theme: There is an option somewhere (!) in his dialogues of the parameters to select another page in the new tab.
  • If you want to use your new tab homepage: Try https://addons.mozilla.org/firefox/addon/new-tab-homepage/
  • If you want to set another page or a completely blank page: Try https://addons.mozilla.org/firefox/addon/new-tab-override/

  Setting up substitute again tab

  After installing this extension, you must use the Options page to set the new desired tab page (instead of use subject: config).

  Open the page modules using either:

  • CTRL + SHIFT + a (Mac: Cmd + shift + a)
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click Extensions. Then on the side right, find the new tab override and click the Options button. (See first screenshot attached).

  Depending on the size of your screen, you may need to scroll down to enter the address in the form. (See second screenshot attached). For example:

  • (Default) page thumbnails = > subject: newtab
  • Blank tab = > subject: empty
  • Built-in Firefox homepage = > topic: welcome
  • Any other page = > full URL of the page

  Then tab or click this form field and you can test using Ctrl + t.

  Success?

  Once you have set it as you wish, you can close the Add-ons page (or use the back button to return to the list of Extensions of this Options page).

• I tUNES PLAYS SYMPHONY MOVEMENTS in THE WRONG ORDER. HOW TO PROPERLY RE-ORDER THEM?

  iTunes plays the movements of the Symphony in the wrong order.  How can - I have properly rearrange the order?

  With a playlist, you can organize tracks in order any you want. iTunes normally the media played in the order indicated on the screen. In the view of songs sort as Album of the artist should give the right order. in some cases an album may be put with movements out of sequence to adapt to the constraints of the CD format, but there is nothing to stop change you the disc and track numbers according to your desires.

  TT2

• HP Officejet 4630e all in one: the time on my printer display shows the wrong time

  The clock on the display shows the wrong time.  Does anyone know how to rectify this please.

  Hello

  The date and time settings would cause problems of synchronization with Eprint if incorrect. The date and time should be accessible from the Preferences menu.

  Try this

  Power reset

  1. Without putting off the product, disconnect the power cord from the back of the product.
  2. Wait 30 seconds and then plug the power cord into the back of the product.
  3. If the product is not already on, press the power button to turn it on.

  Now, try to change the date and time and check.

  Where this fails, try this

  Setup > tools > restore defaults

  Try to set the date and time of return

  NOTE: This will remove network also settings so you need to redo the configuration of the network

  Measures to restore the network configuration

  http://support.HP.com/us-en/document/c03834108

  Although I am an employee of HP, I speak for myself and not for HP.

  Click on the thumb BRAVO upwards on the left to say 'thank you '.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

• a loop in a struct in the wrong order?

  the attached code implements a struct containing information about 5 RSS feeds. then I have to loop through the struct and call a CFC that reads the stream, and I pulled out each signal to the screen.
  
  problem is that when I create the struct I have the keys in the following order:
  1 digg.com
  2 netflix.com
  3 phpfreaks tutorials
  4. phpfreaks items
  5 porkchopsandwich.com
  
  but they are output in the following order:
  1.Digg.com
  2. phpfreaks items
  3 phpfreaks tutorials
  4.porkchopsandwich.com
  5 netflix
  
  I can't understand why? If I dump the struct, the keys are displayed in the correct order. I don't understand. any help would be appreciated.
  

  Change your cfloop

  Since you have your structure defined with a number, just make reference only and you are fine.

  CR

• HP DeskJet F380: HP Deskjet F380 print pages in the wrong order

  By printing on both sides manually, I often use odd/even pages options to print more quickly than the management of every page on its own. However, with this Deskjet, my pages and pages of documents THAT ALWAYS get messed up would be in the sequence of sequences in a weird order break; lose my ink and my papers!

  How can I fix it? This has happened far too many times

  Hi @Itsyvonnely,

  Welcome to the Forums of HP Support!

  I understand you have some problem with the pages print is not in order when you use the manual duplex function. I will definitely do my best to help you.

  What program are you printing from?

  Try to print a document duplex from another application.

  If you are using MS Word, I suggest you repairinging software, How to troubleshoot print failures in Word.

  To check the printer driver, please download and run the print and Scan doctor, it will be probably diagnose and fix the problem you are experiencing.

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  To see if the driver software is up-to-date, d download and run The printer installation wizard The HP printer wizard detects automatically the best print available for your HP printer driver. It is only available for Windows 7, 8 and 10. 

• Canon MX870 printer under Win 8.1 prints pages in the wrong order

  I'm transition to Win 8.1 Vista.  I have a Canon MX870 printer with the problems of the order of the pages.  With my printer settings exactly the same as on my Vista, Win 8.1 machine print a multipage document insists on treatment of printing a document to the rear.

  For example, to set the printer as I always FEEL OF LAST page, he treats the last page on the first page of the document.  So on a document of 3 pages printed double-sided, pages 2 and 3 are back-to-back, and 1 page is blank on the back.

  When I undid the IMPRESSION OF LAST PAGE setting, it made no difference.  He has always treated the last page as if it were the first real page of the document.  I went on the Canon site and nothing struck me re a fix of the problem on their own.

  Ideas?

  Auggy - I got it!

  I didn't understand at first what suggested you because I had done all this (I THOUGHT!) but the design truly Byzantine Word 2013 defeated all the logic I had previously applied.

  The very way which is less intuitive word 2013 works is that it separates the printer between windows Canon printer commands and window, under Options, advanced with the printer controls the latter taking precedence.  So no matter what I tried in the print window of Canon, Word 2013 would not allow it to take effect.

  WHY IN GOD'S CREATION WOULD WORD 2013 DESIGNED THIS WAY?

  In any case, after three visits to the Options Word 2013--> window advanced (at the bottom of this window, so it is not visible at first sight), I realized that I need to uncheck command-last-page to print the word 2013.  Print-last-page Canon is taken into account that accepted.

  Damn!  Why did do so absurd?

• Print photos in the wrong order

  In the Photos app, I need to print multiple photos on one page.  It won't let me print them in the order I'd like, but seems to align them in chronological order.  The photos appear in chronological order on the page where I have chosen size, etc, but when the real print preview page comes, they are in reverse order.

  First of all, how to make them print in reverse as they originally appear (not?)  Second, is there a way to force the program to print the photos in the order I want them, not in chronological order?

  What presentation do you use?  Try the following:

  1 assemble the images in an album and organize manually in the order you want.

  2 - type command-A to select all the images in the album.

  2 - type Command + P to access the print window.

  3 - Select the Contact card or custom page layout.

  In two of these page layouts, images are in order I put in the album.

  4. for the custom sheet, you will need to choose a size that will get all the images on a single sheet.

  If you have not updated to 10.11.3 with Photos 1.3 I suggest you do so.  There are a number of bug fixes in both as well as new features that make the update is worth it.

  

• 20.0.1 updated: right click on the page displays all THE menu options, many (all?) don't work, no 'view page source', not 'open in a new tab '.

  After 20.0.1 a few hours ago, click Update right displays all THE menu options, do not work a lot (all?), as 'view page source', 'open in a new tab' etc etc.

  To clarify, this happens if you have the active Firebug 1.10.6 addon.
  You can fix it by updating to the version of Firebug 1.11.2

  Here's how:
  Go to your add-ons Manager, right-click on the Firebug add-on and select 'Find updates'.

  Hope that helps.

• Lightroom for web - images is displayed in the right order

  Images from the collection synchronized on lightroom for web show in a different order on the web, I do something wrong, or is this the case?

  Hi magicgenie,

  Well, it must synchronize in the same order that they were added to the collection on the desktop app and you can sort them further.

  If its not to do it, you can remove data from the Lightroom Web synchronization and re - sync only collection that is necessary.

  Open Lightroom

  Go to preferences > Lightroom Mobile > delete all data

  Kind regards

  Mohit

• Why this function ends in the wrong order?

  The code below should cause the stairs to move to the left and the ball to stay in his position of x, but its position there must be aligned with t

  The code below should cause the stairs to move to the left, the ball is in line with the upper stairs. Instead, what happens is that the staircase moves to the left and the ball snaps on the stairs below on the y-axis, while it is in the front of the upper stairs. The second part of the code seems to work before the first part, causing the ball do a hittest, before the stairway moves. Should what changes I make to get this code to complete in order?

  

  ball.addEventListener (MouseEvent.CLICK, jumpStairs)

  function jumpStairs(e:Event):void

  {stairs.x = 90;

  If (stairs.hitTestPoint (ball.x, ball.y, true))

  {for (var m:Number = ball.y; m > 0; m =. 1) }

  {ball.y = m;

  If (! stairs.hitTestPoint (stairs.x, stairs.y, true))

  {break}

  }

  }

  }

  in fact I don't understand what you're trying to describe, but I can tell you that you are likely to encounter a problem because the hittests flash based on the display and the display is not updated until all the code at the end of the execution in a framework particularly.

  If your hittests will be performed on objects like appearance on stage just before clicking on the ball.

  to remedy this, use an enterframe loop to make sure that the display is updated after the removal of your stairs and then run your hittests.