Similar Questions

• KB955759 does not appear when I check the updates manually, but it appears with the yellow shield after you have enabled the automatic updates.

  original title: Windows Update acts confused - kb955759 does not appear when I check the updates manually, but it appears with the yellow shield after you have enabled the automatic updates.

  I just reset my CMOS settings, writing zeros for my hard drive, repartitioned, reformatted and used the recovery cd Gateway system to get my computer to Windows 98se - factory settings, except at the beginning of the recovery of the system, when it says "press any key for advanced options," I pressed a key and then I unchecked all the default (3rd party) applications including Norton and left only 2 checked: "Updated USB Hub" and "Windows Shutdown Supplement," while nothing has been installed, leaving only win98.
   
  Then I used my disc XP Home (SP2) update.  I, immediately after the upgrade to Windows XP, installed "Office XP with Frontpage, Developer Edition", then Norton 2012 before never connect to the internet.
  Then, I connected to the internet and continuously update of Norton, before ever hitting the Windows Update page. The first thing I did then was to activate Windows, and then activate the office.
  Then I hit the update of Windows "button" that says "get all your updates in one place... upgraded"Microsoft Update".  I, then, just kept hitting the page update and restart, until I find the SP3.  Then, I took a break, until the next day.
   
  I have an ADSL broadband, with a Linksys EtherFast PCI card.
   
  Then I got SP3, which installed without any problems.
  So I just kept "microsoft continuous update" manually (and reboot), until there is no more updates - EXCEPT, I always uncheck Windows Malicious Software Removal Tool - which was the only screening at the final stop for the night.  I think that I ticked the box "don't ask me about this update".
   
  Then, in the morning, after you have enabled automatic updates, I noticed the yellow shield - Windows security icon (or whatever it's called), so I clicked on it and checked it was tellimg me was available [when I checked "Custom Install (advanced users)"].  What showed was 1 update - 955759 KB.
   
  After the problem, already at the reformat (months and months), see the yellow shield telling me there are updates available, which were already installed (before rebooting), I checked manually on the internet with IE 8, pressing alt, "T", "U".  There is no updated list.  Then I checked through my history of update (twice), and KB955759 had not been installed.
   
  My update setting is to let windows download ('important') updates, but let me choose when to install them.
   
   
   
  What is the right - Windows Update (NO update important reporting) Site, or the yellow shield (reports [a] kb955759 [update])?
   
  I can not yet confirm he is supposed to be an update for XP home kb955759, because I was unable to locate any detailed documentation on this 'thing' that protect the yellow safety seems to think is a significant update.

  Comment 1: To my rquest, a moderator merged your thread in the Sub-forum Win7 updates with your wire in the Sub-forum of updates of Windows XP 20 Feb-12, c. 07:50 UTC.

  Comment 2: If you will not contact the MS Support on this issue?

  ~~~~~~~~~~~~~~~~~~~~~~~~~~

  Just for the heck of it, I have disabled the automatic updates, cleared my browser cache, checked manually, updates from microsoft (windows) and found none (with the exception of software malware removal tool windows [which I have not installed]).  Then, I turned the automatic updates on, and without even being connected to the internet, the yellow shield popped up with the kb955759 "update"...

  Repost...

  1. If you open Internet Explore (only!) to http://windowsupdate.microsoft.com and run a CUSTOM scan, KB955759 appears in results?... If so, you manage to install it and/or security updates available?

  2 after no. 1 above [<>], is the 'yellow shield' icon appears in the Notification area (on the left of your clock)?  .. and if yes, by clicking on the 'yellow shield' icon tells you that KB955759 or any other updates is ready-to-be-installed?  .. .and if so, you manage to install it?

  3 after doing 1 # & #2 above [<>], is KB955759 or any other updates offered as a ready-to-install update when you go off your computer?  .. .and if so, you manage to install it?

  ... I guess that clearing the browser cache does not erase 'downloaded' updates.

  Nope. If you want to clear the queue of the update...

  OPTION A:

  1. stop the automatic updates service:

  Start > run > (type or copy/paste) services.msc > click OK
  Double-click automatic updates > click stop
  (Stopping the service will take a moment)

  2 remove the contents of the download folder:

  Start > run > (type or copy/paste) %windir%\SoftwareDistribution > click OK
  
  Open the download folder and delete its content
  Close the window.

  3. start the automatic updates service:

  Start > run > (type or copy/paste) services.msc > click OK
  Double-click automatic updates > click Start
  (Starting the service will take a moment)

  OPTION B:

  1. open Internet Explorer (only!) to http://support.microsoft.com/kb/910336 [don't know the titles, etc..]

  2. make disappear/close the Troubleshooter automatically pop up.

  3 repaired 50202 in DEFAULT modes and AGGRESSIVE. [1]

  4 reboot.

  Does anyone know how to determine if software mailicious removal tool is installed on XP? [source ]

  Check the located log file...

  C:\Windows\Debug\ MRT. NEWSPAPER <>

  Related...

  ... This leaves us with the malicious software removal tool don't appear not.

  I guess I'll have to leave "auto-update" (I often have less than 65 M of free memory left and do not have enough memory to msrt) and don't assume no other current error. [source; 17 Aug-11]

  It's no wonder that you ended up having to do a clean install of Win98SE & then upgrade to Windows XP again!

  ================================================================
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not updates installed in Add/Remove Programs list.

• I'm looking for missing drivers!

  I'm looking for missing drivers!

  I have ACER ASPIRE E1 - 470 downgraded to Windows 7 64-bit

  

  Try here probably first chipset:

  http://www.driverscape.com/manufacturers/Acer/laptops-desktops/aspire-E1-470/102809

  This site must be safe, but you can have the antivirus running anyway.

• Why is my music library still looking for missing unknown album everyday now never stops

  Why is my music library still looking for missing unknown album everyday now never stops

  Hello

  ·         You did changes to the computer before the show?

  ·         What Media Player do you use to play music files?

  ·         What is the file type of the music files you want to play?

  If you are using Windows media player, I suggest you to re - index the WMP library by following the steps below and check it, if it helps:

  (a) output Windows Media Player.

  (b) click Start, run, type %LOCALAPPDATA%\Microsoft\Media Player, and then click OK.

  (c), select all the files in the folder and then click on Delete on the file menu.
  Note: You don't have to remove the folders that are in this folder.

  (d) restart Windows Media Player.
   
  Note: Windows Media Player automatically rebuilds the database

• Looking for missing drivers after downgrading

  I got a new HP Envy 700 - 030qe CTO of Windows 8 for Windows 7.

  First question: is there a place I can get ALL the compatible drivers for this machine on Win7?  I'm sure that HP sold this machine exactly (or almost exact) a few months ago with Win 7 on it?  If someone can tell me the model number then I could order the recovery for her disc, hopefully.  I have a legal copy of Win7 with license key, all I need is the drive to recover to Win7.  Even if this is not correct, it would be closer to that you are looking for a bunch of missing drivers one by one.

  Second question:

  I could find most of the drivers except something that presents itself as a USB controller (although most of the USB ports seems to work, maybe all of them).  Any idea what to try for this HP drivers:

  CONTROLLER USB - Hardware ID

  PCI\VEN_8086 & DEV_8C31 & SUBSYS_2AF3103C & REV_04

  PCI\VEN_8086 & DEV_8C31 & SUBSYS_2AF3103C

  PCI\VEN_8086 & DEV_8C31 & CC_0C0330

  PCI\VEN_8086 & DEV_8C31 & CC_0C03

  Pointers are greatly appreciated!

  Thank you.

  Hello:

  You need the USB driver.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=3467&DwnldID=22824&keyword=Intel+USB+3.0+Extensible+host+controller+driver&lang=eng

  There are no models with the motherboard in your PC with W7 drivers.

  Even if there were, the recovery of one of these models discs would not work on yours.

  W7 drivers you need:

  First install the chipset driver and restart.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=816&DwnldID=20775&keyword=chipset+installation&lang=eng

  Graphics card:

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=22842&ProdId=3720&lang=eng&OSVersion=%0a%09%09%09%09%09%09%09%09%0a%09%09%09%09%09%09%09&DownloadType=drivers

  Try this audio driver:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-119074-1&cc=us&DLC=en&LC=en&JumpID=reg_r1002_usen_c-001_title_r0028

  Wired network.  Download and install the driver 4th on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=13&pfid=5&level=5&Conn=4&DownTypeID=3&GETDOWN=false

• Magic Bullet Looks is missing since the upgrade.

  Hi all

  After the upgrade to Premiere Pro for Premiere Pro 2015.3 (v10.4 "Good buddy"), all my plug-ins Red Giant now seem to be "missing" when I open existing projects containing filters from red giant.

  I have the Magic Bullet Looks applied to an element in a project.  In the effect controls panel - the filter appears in the list as 'Filter in offline mode' (sounds like).

  Anyone who knows the cause, or more importantly, no one knows how to fix this?

  Any help is very appreciated.

  I think that I found the solution to my problem.  I made a copy of the Adobe Premiere plug ins folder C:/Program Files/Adobe/Common/Plug-ins/7.0/MediaCore and saved as a backup to my desktop.  I have emptied the original file of all the plugins and reinstalled plugins via the website of red giant and then reactivated their inserting the code.

  Fingers crossed, it seems to work.

• How can I automatically insert a two paragraph after paragraph marks (¶) style?

  Sversion hort on the issue:

  How can I make 2015.4 InDesign automatically inserts a paragraph style (in this case, the style is a paragraph separator bar) after two consecutive paragraph marks appear in a linked Word file?

  Long version of the question:

  I manage a large number of product labels for my employer. I created Word files containing the necessary indications, warnings, first aid, and the news of immersion for each product. I want to be able to place the Word file in the layouts of the label, and I hope that InDesign can insert a paragraph style that I created after two consecutive points of paragraph (¶). The paragraph in question style is a paragraph dividing bar which occupies about 85% of the width of the text box. I tried to create the bar directly in the files of words themselves, but apparently not good

  An approximate example of what I'm trying to say:

  (Although the Word file would look like with on special characters)

  Nihilin tem live sedessi ntrurorum prionteludam quam optilnequi pecre conicat than pul hem omprio, caectuite autem, cum itemuli pat. SCII confirma ina, quitilii patquem teribus? ¶

  ¶

  Nihiliciorei in dog; No det, ublicae con ina, nonsus iamdiem duconsuludem in imed, conituasdam and big inam egilnes estemus tum ocremei sum ponsulem mei fur tem, quo is.

  (Would I want InDesign to do)

  Nihilin tem live sedessi ntrurorum prionteludam quam optilnequi pecre conicat than pul hem omprio, caectuite autem, cum itemuli pat. SCII confirma ina, quitilii patquem teribus?

  __________________________________________________________

  Nihiliciorei in dog; No det, ublicae con ina, nonsus iamdiem duconsuludem in imed, conituasdam and big inam egilnes estemus tum ocremei sum ponsulem mei fur tem, quo is.

  Is it possible to implement something like this?

  Thanks for your suggestions or help!

  If the empty paragraphs in Word (with just the paragraph return) have a Style applied, and paragraphs with text also have a Style applied, the answer is Yes.

  When you place the Word text in InDesign, maintain the formatting of the word and use matching Style. This allows you to take the text that contains the Styles applied Word and InDesign can automatically apply your corresponding InDesign Styles.

  Please see attached.

  

• Can't pair BT keyboard after battery replacement!

  Summer using only the keyboard for more than a year without a single question. Or I just replace battery, it won't match more. Ridiculous! View of BT devices for half the price with never affected by one question!

  "Try the pairing was unsuccessful"

  If I press the power button / egg on the right side of the keyboard, it flashes and keep fast blink 2 flashes for about 30 seconds.

  Is there a solution to this?

  When your keyboard Apple wireless, mouse or trackpad is turned on, the light blinks twice on pause and then repeats (blink-blink-pause, blink-blink-pause). This means that the keyboard, mouse or trackpad is "discoverable" by your Mac and you can pair your Mac with it. After three minutes, the light goes out. The keyboard, mouse or trackpad is yet, but it is no longer detectable. To make it discoverable again, turn it off and then back on.

  If the keyboard, mouse or trackpad wireless connects to your Mac, the light regularly for 3 seconds before it turns off. This indicates that the device has paired with your Mac.

  When your mouse Apple Magic Mouse is connected to your Mac, the LED flashes at regular intervals. He could blink fast or slow, but in all cases, a regular model in flashing means that the mouse is connected to your Mac and works correctly. If you use an Apple wireless Mighty Mouse mouse, the light continuously when it is connected to your Mac and works correctly. The indicator light on the Apple wireless keyboard does blink.

• Unable to pair Apple Watch after a reset

  My new Apple Watch replacement was paired with my iPhone yesterday after that I received it. This morning it froze (black screen) and I followed the instructions to reset. It was not to find my phone so I unpaired it. Now when I try to pair matching image does not appear, and there is no device listed to allow manual synchronization. I tried to reset my iPhone and watch again, but nothing works.

  Hello

  Clarify the status of your watch, as well depending on your watch and your iPhone. For example:

  Watch

  Is your watch still operational, but just disconnected?

  You always have access to the face of the watch and other functions, but with an icon of disconnected state indicated at the top of the face of the watch at the time display?

  

  Or is it odd - and asks you to choose a language when you turn it on?

  iPhone

  In the app shows, go to: Watch My:

  -Is your display shows at the top of my watch?

  -If you press it, then press the 'i' icon next to your watch on the next screen, the status of the next screen "Matched" above the name of the watch?

  Also

  In your question you say "it was not to find my iPhone." Please specify what you mean by that.

• Bluetooth headset | Impossible to re-pair the device after deletion

  I have 2 fields, one for my wife and myself. I've matched with success the pre of my wife with a stereo bluetooth headset Altec Lansing/Plantronics Backbeat (new) (model BBT903/R). Then I tried to pair it with my pre but it wouldn't recognize it. I have read the help file for Bluetooth on the meadow and realized that I had to remove the association with the front woman first. The help instructions supposed to remove the device to PRE Bluetooth screen name (device name of point culminating right drag, click on delete). I did it on Pre my wife. I then tried to pair with my pre but had the same problem - the machine is not found. Tried again on my wife before and now it not pair either!

  Now I'm stuck. The helmet is not recognized by a meadow. I tried to turn on/off BlueTooth. I tried to change the order in which I turned on devices (first helmet, second pre and vice versa). I tried the hard reset by removing the PRE battery and put it in. I would do the same for the helmet, but the battery is not removable/accessible.

  With the Plantronics / helmets Altec Lansing, you must press the button so that it flashes Red and blue (and alternates)... the flashing blue means it's looking for a connection to a device with which it is already associated. Hope that helps.

  Message edited by dayres on 07/06/2009 09:15

• BootCamp Windows does not start after you have enabled disk encryption

  Hello everyone, I am in a desperate situation and I need your help. Here is my sitatuaion.

  I have 13-inch MacBook Pro (early 2011). I put an SSD inside as my main drive and I also put an extra drive (HDD) in the optibay instead of my drive superdrive. The structure, I had was this:

  (1) my entire SSD was my OS X disk.

  2 my HDD optibay had three partitions: partition backup Time Machine, a) b) Extra partition (for stuff like media), c) Windows partition with Windows 7 installed.

  Had that Setup for a long time and everything worked very well, my SSD has been saved on the Time Machine partition on the HARD drive in my optibay.

  Then, I decided to turn on the File Vault 2. First of all I did for the SSD with my OS X on it. Everything went well and I could always start my Windows 7. Then, I decided to encrypt my Time Machine backup (because what's the point to encrypt the main system disk if you do not encrypt the backup as well?) -Here too everything went well.

  In other words, until I needed to start Windows. I have restarted my Mac, hold down option, the picker contraption came, but there was no windows to the choice. I came once before (but), so I knew I could always start in it.

  I jumped into my USB thumbdrive with fairing on it, he chose and he gave my start on the Windows partition option. But this time it did not work, I got an error message saying my there is no bootable device or something like that.

  I have confidence in turning the things of encryption for the partition of Time Machine (which is on the same HDD as my Windows partition) screwed disc here.

  The only question is: can I fix, start Windows, without having to install it from scratch? What I want is to have encryption enabled for both drive my main SSD where I have my OS X installed AND the partition of Time Machine that is on the disk in the optibay HARD and also have a Windows partition on it, but still be able to start Windows.

  I am running 10.11.13 El Capitan.

  Can you help me somehow? Here is my list of cs diskutil:

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 128,0 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage Macintosh 127,2 disk0s2 GB SSD

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 500,1 disk1

  1: EFI EFI 209.7 MB disk1s1

  2: Apple_CoreStorage Time Machine 150.0 GB disk1s2

  3: disk1s3 Apple_Boot Boot OS X 134,2 MB

  4: Apple_HFS Extra 300.0 GB disk1s4

  5: Microsoft Windows 49.5 GB disk1s5 data base

  / dev/disk2 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh SSD 2 GB + 126.8

  Logical volume on disk0s2

  406F3A62-89AE-4F91-BEEF-B8CE0B16C8EF

  Unlocked encrypted

  / dev/disk4 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Time Machine disk4 GB + 149.6

  Logical volume on disk1s2

  0567D276-3738-4776-9CC5-B69F922B0A0C

  Unlocked encrypted

  Your problem is not related to FileVault2. Your question should have begun when additional Apple_HFS was created. Please after the release of

  sudo fdisk/dev/disk1

  If you have a problem with your Mac, you can potentially lose the SSD and backup TM. It is not an optimal configuration. A TM must be physically separated from your Mac, so you can restore the TM backup to a new Mac, if necessary.

  Also, since you removed the optical drive, re - install Windows on your 2011 model is a very rough road to travel.

• After "Missing Boot Manager" with low RAM problems

  I woke up randomly a few weeks ago my computer, sitting on a black screen with the error ' BOOT MNGR MISSING, IMPOSSIBLE TO BOOT. PRESS CTRL + ALT + DEL TO THE RETSTART'.

  I have no idea what caused it, it seemed completely random. After some googling I found that I just need to insert my windows disk and restore, which I did and was able to start properly.

  However, since then, if I have more than ~ 10 tabs open in Chrome and XBMC running that I often an error popping up telling me that my computer is low on memory and that I should close Chrome or XBMC (it varies). This also seems to be correlated with the tabs in Chrome crashing. I seem to have a limit of about 10 tabs, after that each new tab page crashes.

  I have 4 GB of memory of decent quality and before that I never had memory problems of low.

  Below is a screenshot of my resource manager. It shows when I open I use about 70% of my RAM.

  "Windows correctly diagnosed a low virtual memory condition. The following programs use the most virtual memory: chrome.exe (4784) consumed bytes 351731712, chrome.exe (4252) consumed bytes 330465280 and XBMC.exe (1392) consumed bytes 237559808. »

  You have a configuration of Page file (virtual memory)?
  If you don't know how this is going to.
  Control Panel > system > advanced system settings > Performance > advanced >
  Virtual memory and select managed system, or choose a number like, say
  4096 MB (4 GB), or 6144 MB (6 GB) for the minimum and maximum.

  "I seem to just be able to use about 75% of my RAM."
  If you are using 32 bit Win7 that about 75% of you RAM is accessible - 3.25 GB
  all 32-bit operating systems can access.
  If you have 64-bit Win7 is probably not so much a matter of not being able to, just that it is not required by, or used by, the software you use, but the software (Chrome) do we file Page, and RAM.

• Touchpad not scrolling after disabling/re-enabling

  I am running Windows 7 on a 64-bit laptop G62. I decided recently to review what programs were running at startup and disabled the Synaptics Pointing Device Driver, not knowing what it was for. After re-start the computer, I noticed that I couldn't scroll using my touchpad more. I have reactivated the Synaptics Pointing Device Driver and restarted my machine, but scrolling does not always work. If I try to open the "mouse" of the Control Panel, it says 'Impossible to connect to the Synaptics Pointing Device Driver'. Continuing, I am told that the Synaptics PS/2 Port TouchPad "device works correctly. However, I can't change the settings to enable vertical scrolling or allow horizontal scrolling. I don't know what the problem is and what I should do to remedy. If anyone has suggestions/solutions, I would be very grateful to hear. Thank you.

  Nevermind, I solved the problem. Search "Synaptics" in my computer. Opens a folder labeled Synaptics. Selected InstNT. Right click; Choose 'run as administrator '. Problem solved.

• Trolling after the marks left by the drawing tools.

  After update to animate CC today, I noticed a problem which is severely moving down my workflow.

  After every race I do (whether with the brush, brush or pencil tool), there is a second 1-4 break that occurs before the program completely ends to treat STROKE and the registrant on the canvas. This makes it very difficult to predict the consecutive brush strokes and also animate very slowly.

  Similarly, the program seems to take its sweet time after I click on a box to fill with the paint bucket tool, especially when close gaps is turned on. The program takes anywhere between one and ten seconds to determine if the form can be filled in, then fills or not. During this long break, I can't do anything in the program and have no other choice but to wait and see what happens.

  Someone has an idea of what I can do to fix the lag spikes?

  I use Windows 10 and the latest version of Adobe animate CC.

  A few new features.

  I found the cause of brush lag spikes. Make sure that when you use the Paintbrush tool to enable 'painting as a Fill. Make sure that the object drawing mode. This greatly improved the recording of brush speed.

  However the fill tool still has considerable lag. Has anyone found a way to make work more quickly without having to turn off the narrow gaps?

• Look like quotation marks ' &gt; ' in an InDesign document

  In my work, I am updating an old InDesign CS5 file with new content. Whenever I press on the "or" I get > > or > (not exactly, but it is a symbol that looks like a lot to > > or >). I never had this problem and cannot understand why he did this. There is nothing else in the document which is the symbol of evil when the button is pressed.

  I use a Mac and nothing this Council stereotyped it helps (reset the computer, open and close the program, etc.)

  I also already went into preferences & selected the quotes, then changed the quote settings in preferences > dictionary to be the exact quotes, but it makes no difference. I feel like it should have been the solution to the problem.

  Any ideas? I'm tired of doing good quotation marks in another document and the copy-paste it everytime I want to use a (the only thing that works).

  Nevermind, I Googled it based on a response from M Blackburn and got the solution. I will now explain the solution to the case where someone else who wondered stumbled across this.

  The correct solution is:

  1 select text and go in the character Panel.

  2. in the character Panel, at the bottom there is a drop down that says language. If you have selected the text and the current selection in the drop-down list is empty, this means that there are several languages (in my case, somewhere in the document, the original author of the document used accidentally French, I guess).

  3. change the drop down list for "English: USA".

  I had already changed the language and the two options in the preferences of quote > dictionary article, and this has not changed anything. The French apparently replaces it.

  M Blackburn was right about it being French, but Bob Levine of course which is the solution... I wanted to know how to do it and Jeffrey_Smith I said earlier that I already tried. Please check your answers to ensure that they are worth!