Palette for the Edit menu?

Similar Questions

• How can I add a text field for the main menu?

  I have a project with a menu.  He has a title.  I wanted to add an additional track on the menu, what I had done in an earlier draft.  I would have thought he would have intuitively obvious, as highlighting the existing title I and do a copy and paste.  However, I learned that nothing is intuitive with Premiere elements 12.  Can someone tell me how to get a 2nd title on my main menu?  I have done it before, but apparently did not write it and I was faced with that I falsely assumed would take me 30 seconds to accomplish.  Thank you.

  Rick

  Do you really need a second title for the page in the main menu and the selection of scene or you page fixed for your Adobe title in more than one line?

  I wonder

  I wanted to add an additional track on the menu, what I had done in an earlier draft.

  Is it possible that as soon as you use a theme which came with 'subtitle', as the trip/Beach Resort, not all do.

  

  Workaround for the title with more than one line of text can backfire on you. But you can try. Excerpt from my first items 13 on this blog

  0019 first Elements 13 movie Menu title question: multiple lines of text

  
  A first elements 13/13.1 user reports that, if it creates a 3 lines of title text for the main menu of the fake big screen theme in the customization area of Movie Maker project, these 3 lines of text eventually "encoded" in the project of reopening after that that there had been closed.

  We have confirmed this report and extended it to include this problem appears for 13 of Menus other than the fake Widescreen cinema. This issue is not seen in first items 12/12.1 and earlier versions.

  BEFORE REOPENING THE CLOSE SAVE

  Figure 1. Main menu of Spring Flower home with 3 lines of text, as seen before the closure of the Reopen

  AFTER THE REOPENED NARROW SAVE

  
  

  Figure 2. Spring Flower main Menu title initially with 3 lines of text, as seen from the closure of the Reopen

  
  
  The only way found so far to get the final product to have 3 lines of title text for menus in the final product is to customize the theme to the movie Menu in the customization of the Menu movie of the project area, do not save, close the project at this time and can do the burn to.

  
  Many variables were examined to explain this behavior. So far, no answer for why.

  If you are determined to use a particular theme that comes with the title menu and subtitle, look at the text of the Palette layers layers in the editing menu .psd file (.psd Editor could be Photoshop CS or higher).

  Regarding

  on my project last year that was the menu that I liked with 2 text fields, I have also got rid of the "arrow" shortly before the text that was the menu key.  Anyone know how I do that?  I can't figure that out now.

  Could you be more specific. But, for now, consider... If you Play All text, you double-click to open the text of the amendment, the deleted text, click OK. Play All disappeared. Sometimes, in page and removal of text "main menu" scene selection to the navigation button... double click on the button to open the changes to the text, delete text, press ENTER, and then bar spacing, and click OK.

  Please let us know if everything above the target you wanted to know.

  Thank you.

  RTA

• Rotation of the photos in iPhoto I could simply use the trackpad with 2 fingers turning motion.  In pictures, it seems that I have to use the Edit menu, etc etc?

  In iPhoto, I could simply use the trackpad with 2 fingers rotating motion to change photos quickly to stand.  In the Photos but it seems I have to use the Edit menu, etc. etc.?

  command + r or command + option + r, depending on the direction you want.

  Also, right-click on the image to the same command, hold the option for the choice

• The find command in the Edit menu does not work. No window in which enter the words I want to find opens.

  When I go to edit and click on find no window opens and so I can't enter the words I'm looking for on the Web page. The same result is delivered with the help of Ctrl + f. Infact, when I click on the Edit menu, I noticed that Find is not followed the habit... Does that mean that search doesn't do not form part of this new version of Firefox and if so why?

  If you use Edit > Find or Ctrl + F, then you should see a bar of search at the bottom of the browser window. The current versions of Firefox do not show a pop-up window.

• What are the CSS selectors for the main Menu of FireFox 4?

  What are the CSS selectors for the main Menu of FireFox 4?
  http://img228.imageshack.us/img228/5512/ff4menubar.gif

  Always the same as in Firefox 3.5 and 3.6 versions:

  #main-menubar
  #file-menu
  #edit-menu
  #view-menu
  #history-menu
  #bookmarksMenu
  #tools-menu
  #helpMenu
  

• inserting submenu items via the code - not the file editor graphics *.uir (not the edit > > Menu Bars... method!)

  How submenu items are constructed by code and not the edit menu bar settings in the *.uir Editor?  NemMenuItem (...) does not do that, or I'm not plugging in parameters correctly, which I doubt is the case.  BTW, he has no explanation in the help of v.8.0.1 AIC menu items on NewSubMenu (...) and how to use the subMenuHandler for all other functions.  At least everything I found had nothing to do with submenu items.  Is it impossible to do it by programming?

  Hi Chris,

  You can paste the code below directly to the interactive execution window and run.

  The result is in the attachment.

  #include

  public static int NLP, mbar, menu;
  public static int mitem, submit, submitem;

  NLP = NewPanel (0, "", 250, 250, 250, 250);
  mbar = NewMenuBar (NLP);
  menu = NewMenu (mbar, "menu",-1);

  mitem = NewMenuItem (mbar, menu, "submenu",-1, 0, 0, 0);
  prese = NewSubMenu (mbar, mitem);
  submitem = NewMenuItem (mbar, submit, "submenuitem",-1, 0, 0, 0);

  DisplayPanel (NLP);
  RunUserInterface ();

  I hope that's what you asked for.

  Have a nice weekend

• I have Adobe Acrobat Pro XI.  I went to special characters from the Edit menu and choose some emoji as Favorites, but I can't understand how to insert in the document.  How can I insert special characters into a document?

  How can I insert emoji or other special characters in a document using Adobe Acrobat Pro XI?  I went to special characters from the Edit menu and may not understand how to insert the special character in the document.

  He's not that kind of editor. You can use the characters in a font. If you can select a font with the emoji, which fits into the case, and then enter the characters, it can work.

  This suggests that you try to do TOO MUCH with a PDF file. It is a common thing, but the message should be: everything simply because you can edit a PDF file, does not mean that it is the most effective way for you to do your job.

• How to enable the Edit menu and layers in the trial version of PSE12?

  After watching http://www.Adobe.com/products/Photoshop-elements/FAQ.html#trial-information 1., who says that it is a fully functional version, I downloaded the trial version of PSE12,.

  But when I opened a photo, then select > All, the Edit menu States the following:

  

  Thinking that maybe the layers has for assets, but the menu of the window displays the following text:

  

  As in the Edit menu, everything is gray.

  How can I make things active so I can really evaluate this trial version?

  You are in Expert Mode?

  See you soon,.
  --
  Neale
  Insanity is hereditary, get you your children

  If this post or by post from another user solves the original problem, please mark as correct and/or useful messages accordingly. This helps other users with similar trouble getting answers to their questions more quickly. Thank you.

• InDesign CS5 crashes when you click the Edit menu or the context menu

  I had this problem with InDesign CS4, infuriating some references to other people having the same problem, but never real solutions found.  This problem seems in InDesign CS5.

  When a document is open, if I have the Edit menu or click anywhere in the document window (including in the area of cardboard... it is to be on an object), ID immediately freezes and I get the dialog box Windows 7 "Adobe InDesign CS5 has stopped working".

  I've deleted preferences, created a new document of a page, and the problem persists.  If no document is open, I can pull down the Edit menu very well.  When a document is open, ID crashes before it even to call the menu.  It does not matter that I use the mouse or the keyboard to access the Edit menu.  I can also right click on things like the tabs in the palette to bring up the context menu.  But I can't right-click anywhere on the document itself without ID crashing.

  The maddening thing is that the problem has not shown until shortly today.  I grew up effects of an object window via click many times, but also use the context menu of fitting.  It was working fine last night and this morning.  Then suddenly no visible reason, the accidents began to occur.  I'm not aware of any change to my system that could reasonably be expected to cause this.  No new fonts, no update of Windows, no updates of Adobe.

  Any suggestions on if not, how can I solve this?

  Brian,

  I noticed when I Open Office started sometimes my InDesign blocks exactly in the same way that you described. Because the programs work secure storage space I realized that the only thing that connects them is Clipboard.

  Sometimes if you ctrl + c some common OO sheet, by access to the menu edit InDesign content or content, InDesign crashes at the same time. In edit & menus command "Paste". InDesign checks Clipboard (I assume it does) and some Open content in there Office actually planting.

  That's how I see it.

• I lost the code for the option menu 'limitations' of the iPhone 4, how can you do then? so I can come and factory reset, it is a 4 digit code, so I can be able toexample factory reset the phone, don't know if this is the right forum for my question but

  I lost the code for the option menu 'limitations' of the iPhone 4, how can you do then? so I can come and factory reset, it is a 4 digit code, so I can be able toexample factory reset the phone, don't know if this is the right forum for my question but

  Sorry, but the restriction password cannot be reset, it is part of the backup and restore a backup that was taken after the restrictions were activated, restore this code again.

  You will have to start without the help of the data backup, configure the phone to factory settings and start over. Follow the steps mentioned in this article:

  Use iTunes to restore your device to factory settings - Support Apple iOS

  If you lose or forget your password restriction, you must erase your device and then put it up as a new device to remove the restriction password. Restore the device by using a backup does not delete the access code.

  copied from: Sur les Restrictions (parental control) on iPhone, iPad and iPod touch - Apple Support

• Spectrum HP convertible x 360: right-click (for the context menu) has suddenly stopped working.

  In my brand new laptop right-click suddenly stopped working (for the context menu or any other use), while I was working with Excel 2010. I checked with Word 2010 and then also with Open Office: there is no right click works with any of them, whether Microsoft or not. I spent more than 5 hours looking for a solution, I did a repair of MS Office 2010, I looked for answers in cats - but nothing seems to work. I guess it has something to do with the touchpad - but what? Thank you for any suspicion.

  Hey @jopg,

  Welcome to the Forums of HP Support!

  I see that you have some problems with a right-click on your convertible of spectrum x 360. I can help you with that, but I'll need to know the model number above all. Once I know that I will be better able to help you.

• Get "key to upgrade is for the edition of windows that does not work with Windows Anytime Upgrade"

  The PC is running Windows 7 Starter.  I'm trying to upgrade to Windows 7 Professional. I bought the card from Windows Anytime Upgrade Key.

  When I entered the PK, error, "put key in level is for the edition of windows that does not work with Windows Anytime Upgrade"

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  If Anytime Upgrade still does not work:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

  Additional resources:

  http://answers.Microsoft.com/en-us/Windows/wiki/Windows_7-windows_install/how-to-successfully-do-and-troubleshoot-Windows/47e1943f-8255-452A-a7ad-2ae14dc974af

• I use Photoshop CC and have just watched a tutorial by Andy Anderson about bosses. In the tutorial Andy put a frame around a picture using the fill on the Edit menu. When I try the exercise my fill window is different and that is not the image

  I use Photoshop CC and have just watched a tutorial by Andy Anderson about bosses. In the tutorial Andy put a frame around a picture using the fill on the Edit menu. When trying to exercise my fill window is different and does not have the picture frame option. How to overcome this please?

  Hello

  Please, go to the filter menu and choose make it > photo frame.

  Thank you

• PSE 13 - activate the Edit menu options

  I just installed 13 PSE and want to put a single border around a photo.  The selection of line under the Edit menu option (in fact, almost all the options under the Edit menu) are greyed out.  I go to the menu Select and selected 'all' before I went to the Edit menu.  How to activate the options in the Edit menu?

  Hello

  You are in Expert mode?

  Stroke is not available in fast mode.

  Brian

• Good laptop cheap for the edition of light during the trip?

  Hello comrades,.

  I'm traveling to the Philippines and need a cheap laptop good (less than 800) for my travels.

  I know that this laptop at low price and Assembly is basically an oxymoron, but let's look at what I do here...

  Because I will go I won't have access to my powerful desktop at home what I do most of my editing. However, most of the edits I do during my travels will be video short 3 to 10 minutes for YouTube and my Blog. I have a project on a large scale, I'm working on, but I won't edit and or made until I'm back home.

  Basically, I just need something that is right for the edition of light and can also fit my budget, as the material below I have already cost an arm and a leg.

  It must also be adapted to travel. I intend to travel anywhere in South East Asia with it. This area is tropical and very sunny, when it does not rain... I usually don't like masts screens but it may be better than a brilliant in such an area? I'm not sure.

  I available to capture my images for most to 1080 p at different frames per second using the following devices.

  1 x Sony HDR-PJ260V

  1 x GoPro Hero3 + money

  For Audio I use...

  1 x H4N field recorder

  1 x H1 field recorder

  2 x AT803 Lavs

  1 x OST-801 Lav

  Since I want to get as many film and audio with amble space has a need of mine. I'll be frequently or at least when its an option transfer video to external hard drives to back up to the sending of the return. This way the images for my more great project waiting beside my desk when I return home.

  Other uses for the laptop include games of light (point and click adventure games) nothing too heavy graphics. I think the game more heavy that I played on my old laptop was SWTOR and he knocked along. Internet connection is terrible in Southeast Asia, so I don't think I'll play this one.

  Except that it will be used for Facebook, to write my book and speak with family and friends on Skype.

  The size? I need recommendations here? Yet once again, keep in mind that I will be backpacking around Southeast Asia.

  Will examine the computers used, if I have to, but prefer new and under warranty.

  Use Adobe products for editing. Thank you!

  Cooling could be a problem too, the philippines are very hot!

  I see no difference except the newegg is cheaper.