Palette of symbols front panel for industrial process equipment

Similar Questions

• Can I link an LED on front panel for a specific element in an array of Booleans?

  In LabVIEW 2010, I have a string of LED. I and array of boolean values that contain the values that the LEDs have to indicate.

  What is the best way to connect the LEDs to elements in the array of Booleans?

  Can I link an LED on front panel for a specific element in an array of Booleans?

  How this is done?

  Can someone show the code example?

  
  

• What is the pinout of connectors on front panel for my p7-1154 Pavilion?

  Hi, I would like to know this as the pinout of the connector on the front panel on Pavilion p7-1154. I would like to know it is that I'm moving my system in another case with more space, better cooling ability and space for managing cables. I strongly modified this computer.

  I intend to put my system in a Fractal Design Mini ARC. I need to know if the front panel pinout is the same or if I need to make some changes. So, the HP Pavilion p7-1154 pinout are compatible with a standard spare case? Is there a schematic pinout for arrangement of the motherboard connector, this façade?

  My computer model number is: p7-1154

  My computer product number is: QP773AA #ABA

  The motherboard is a HP Hibiscus AAHD3 HB made by Pegatron

  Here are the specs.

  * Card mother HP AAHD3 - HB (Hibiscus)

  The BIOS of the motherboard doesn't support overclocking or Dual AMD graphics card

  * AMD 3850 APU (stock 2.9 GHz OC'd to 3.6 GHz using AMD OverDrive)

  * GPU HD Radeon 6770

  * Block modular POWER of Silverstone 500w 80Plus Bronze

  * 16 GB of RAM DDR3 Corsair 1600

  * 2 x Crucial M4 265 GB SSDS in band (RAID 0)

  * 1 WD Velociraptor 600 GB 10 000 rpm HARD drive

  Thanks for any help on this matter,

  Mike

  Mike,

  Please see the diagram below for your card mother pinout;

  

  Please send Bravo

• Outsourcing of the controls on the front panel for a panel floating Subvi

  Hello!

  I already found a few similar topics, but I still don't know which is the best way to solve my problem. I will try to describe my problem in detail first: I have a main VI that acquires data from a device and displays these data in a large waveform graph. I have also a few controls on the front panel to control my device. First, I placed all of these device controls (digital, sliders, etc.) as well as the chart inside the front of my main VI. However, due to limited screen space now I would like to make the largest possible graph and so decided to "outsource" some controls out of the main façade of VI to several panels front-end Subvi.

  I would then press a button in my main VI and it would open the Panel before the floating of the Sub - VI corresponding with outsourced controls when required. However, everything must be absolutely transparent. It is important that floating panels to run in parallel with my main VI, that is the main VI must continue to operate. That way I'll have my data constantly updated in the chart in my main VI while I can change some settings of the device through the controls placed in my SubVIs. These changes will be immediately applied (for example as soon as the main VI calls this slot - VI in its main loop).

  It is important to the visibility of the outsourced optional control panel, i.e. If the Subvi front panel opens with the user that it will pop up and the user will be able to change the paramers device using the. But then the user should be able to close the front panel (hide) the Subvi to see the entire chart again without the Panel floating in front of her (of course control values must be maintained when the Subvi front is not visible). Then the new button is pressed in the main VI that opens the dialog box not modal Subvi containing controls and it can redefine new values of device.

  Advice how to do this are welcome. I don't know if I need something complex like VI server or asynchronous screws or I can solve my problem by changing some settings simple Subvi? Thank you in advance for your help!

  Best regards

  Anguel

  AStankov wrote:

  How about using a global variable for the VI at VI communication instead of a queue?

  A global variable will, also.  Write you in one place and read the value frequently to somewhere else (in the election). So you can see easily to any value change.  However, mark will waste a lot of time processor.  This is why I have proposed to use a queue or a notification utility.

  AStankov wrote:

  Would be the last option that you mentioned, i.e. finish the Subvi at each change of value, I would keep the Subvi front open as needed until things from the user to hide? Or would there be inevitable flickering Panel or any other drawbacks?

  Yes, the Subvi can keep the façade open until the user closes. And there should be no flickering.  The biggest drawback I see right now is that when you expect an event in the Subvi, the mainVI cannot stop without talking to the Subvi to stop.  So you'll need another channel of communication (again a global, a queue, a declarant or an event) to tell the Subvi that she must stop.

• Usability is NOR-SCOPE Soft Front Panel for the PXI-5154?

  I am plans to use the PXI-5154 with his NO-SCOPE Soft Front Panel in a product to test instrumentation. Our past experience, our users need an on-board scope that is easy to use which does not load the CPU. In most cases the scope will be used to check a transitional type of pulses. So, the amplitudes and rise times are essential to ensure compliance with ISO standards. The ability to capture, store and recall traces of reports is important, as well as the ability to perform simple and reproducible follow-up measures. We don't expect our users to have to program the scope; "give me the waveform.

  Does anyone have any comments on the usability of the NOR-SCOPE Soft Front Panel? How to compare with other soft scopes?

  Hello!

  The scope Soft Front Panel is very user friendly and able to load/save waveforms, Load/Save settings and make the scalar measures.  I've attached a screenshot of what the front soft worn looks as well as a link to a help document on the high speed digitizer HELP.  Information on the scope Soft Front Panel lies in this document and can be found under the tab content in the configuration tree (NI - Scope Soft Front Panel help).

  Help of digitizer OR high speed

  http://digital.NI.com/manuals.nsf/WebSearch/2123F564C6DE7B27862574DE006915DE

   

• NIVXD128 Soft Front Panel for DIO - 128

  Dear all

  Where can I find an Installationsfile for the NIVXD128 of Panel or how should I configure the DIO-128 with the NOR-DAQ Configurator for use with façade?

  Thank you

  Hi Blias,

  I m not very good if you asked the attachment, but maybe it's what you need!

  BR

  Alex

  PS: as it is not allowed to join .exe, just remove the '.txt '!

• Panel close? Event causes the front panel for not responding

  I am trying to create a simple program. Some time ago loop that generates random numbers, just so that I can see it is running. An "Exit" button is connected to an output of the while loop Terminal. The event structure is also in this loop, which intercepts "Close panel?" and don't know, then said of faithful son in the while loop output terminal. To be more precise, the output terminal takes an OR statement that takes the button leave and this Structure of Boolean event as inputs. When I run the program, the release button does not respond, however, with the highlight the part of structure of the program event execution seems to work. Sorry if I'm bad at explaining, any help is appreciated.

  I guess my real question is, how do correctly implement you that a button exit stops the loop and clicking on the red x or File: Close is ignored and rather does the same thing as your Exit button.

  The problem is that you don't have a case of timeout in the structure of your event, so he's sitting there, waiting for any registered event (in your case, the only recorded event is the closing of Panel event).  He reads your button to quit once, you should see if you run with execution highlighting.  The while loop can not continue until all that it ends and the structure of the event may not finish until an event occurs.

  A better solution than adding a timeout event is to add an event to change the value of the button exit.  Put the Quit terminal inside the case of the event and the wire which, in the same tunnel connected to stop the while loop.  If you do this there not need timer loop as the structure of the event will be sitting there waiting until the Quit button or Panel is closed.  However, if you want to add more code inside the while loop that will run continuously, then you will need a time-out event (that can take the place of waiting since the timeout will regulate the timing of the loop).

• What is the connections on the front panel for an E9180T, other responses does not apply?

  I have an E9180T Pavalion, which I placed it in a box more grand for better cool (Diabilotek), but cancel it, HDD LED, Power LED, Reset Switch and power switch does not seem to match others listed so far. When hung using these pages the button restart gives me just a blank black screen. using the power to the bottom/Power switch that causes the system to boot normally.

  This forum can now be cancelled, problem is resolved, these problems were caused by wires in the harness front of Diablotek. HDD LED wires are wired to the switch led Reset, the reset switch is connected to the power LED and the power led is connected to a Molex connector. It's a question that I will take with tem. Thanks for all your answers

• The scale of the objects in front panel for different screen sizes

  Hello

  Can someone help me Vi design for different screen sizes. I designed a VI to a small monitor and a lower resolution, but when I open the Vi even on another monitor, objects are not aligned correctly. The properties that I have changed are

  Appearance of window-> by default

  Size of the window-> screen size 0.0 & Tick marked options to keep proportions for monitors different and all the objects on the scale

  Position of the window Run Time-> Maximum

  Concerning

  Imran

  Yep, the minimum size of the value, and then drag the window to be the smallest size allowed, then turn off "allows the user to resize the window.

• HP EliteDesk 800 G2 Small Form: The front panel audio connector - this only made type to use for headphones and microphone

  Hello

  I am trying to determine what type of audio 3.5 mm plug to put into the connector on the front panel for the use of a headset to make video communications.

  could be - sleeve, ring and end cap (mono audio and microphone)

  or

  could be - sleeve, ring, ring and tip (stereo sound and microphone)

  Having read through the manuals and nothing is said on the type to use.

  Hello world

  Just plugged the connector 4 poles on my headset combination for my mobile phone (cellular) and the box of pop - up asked me to select headset or microphone - no selection for both.

  Looks like the right sleeve is for headphones only, and the left one is for headphones or micro - selectable by the user and not the two on a single sheet.

  Everything explained by the practice - but not the paperwork in the manuals.

  #5 for microphone or headset - menu popup is displayed after you insert a 3.5 mm plug to select that one but not both at the same time.  (So I can't use my headset to phone)

  Thank you

  Son

• Reminders does not work in the executable LabVIEW front panel

  I have a couple of reminders in the process template that trigger an event in the event structure to update of the lights on the front panel for the user. Everything works fine until I have create an executable file. This can also be an indication of the other points, I have not discovered yet.

  Any ideas?

  Thanks for all the help.

  Found!

  Not unlike most of LabVIEW developers, I have a range of utility screws that I use over and over again. Such vi is vi uses a property node to find out what environment the application is running in, i.e. .llb, exe, development, publishing student, etc.. This vi is used because SEO screws in an executable file have a way different than when their listing in the development environment. Using this vi allows your code to reference the screws properly when developing and when the executable is built. The code still works because it automatically adjusts the referenced path of the vi. See attachment 'Path Finder.vi environment'.

  Now for the fun part! For some reason, perhaps because of the friendly character of NOR and the relationship it is with its developers :-), AND decided to change the path of the executables in LabVIEW 2009. After hours of troubleshooting and countless rebuilt, I came to the conclusion that the ' paths of the band of "work magically stopped working. It was at this time one of my friends happened to walk and ask why I had everything in my monitor across the room (figuratively speaking of course, I'm sure we've all been there). I explained what could be the only conclusion, band paths do not work!

  My friend immediately began laughing, having recently had the same problem. He explained that in LabVIEW 2009 executable paths are different and our 'find the path vi' would not work. He added that NOR, after finding this funny, however gave the developers a way to solve this problem with a check box within the app Builder. The box is called "Layout using LabVIEW 8.x file." See attached photo named "App Builder."

  The only thing I could say to my friend was, ' silly me, I should have know what that.»

  Laughing out loud

  Thank you for trying to help, it launched my butt.

• Front panel locked, but not due to the structure of the event

  Hi it LV community.

  I did a staemachine program that executes an oscilloscope (screenshot of a provided below... the State of the problem). I ran my program yesterday and it worked very well. Then, like a model, a dialog box opens and I just clicked on it in a hurry. now my front hangs as soon as I move the above-mentioned State "the Oscilloscope settings.

  As indicated, I have go a repeat loop that collects successive impulses of my oscilloscope and displays on the front panel (it works fine). In parallel, I have a structure of the event that makes the tail for the real-time feedback of changes to parameters that I placed on the façade (exodus of state change).

  Here's the problem: as soon as I State 'Oscilloscope Settings' using a Boolean button on the front panel for get me there, the front hangs... No event triggered by this point, and even if it did, I already deselected the "Lock panel until the end of the matter for this event" checkbox in the case where the structure menu.

  So WHY is my front lock now? Thoughts anyone?

  Read the detailed help for event structures.

  He urged that a single event structure serve in a VI. There are moments where more can be used effectively, but caution and a thorough understanding of the structure are needed.

  The problem is that you have several structures of the event in the various cases of the state machine and they are set to respond to the same events.

  When the button Set Oscilloscope, the structures of the event in the purchase Menu and home screen States receive the event. The two lock the screen, but only one of these cases may work. It can transfer control to the State of the Oscilloscope settings, but the other event responding to this same event structure maintains the locked Panel.

  The solution is not not to release any of the event. The default value is usually the best setting. The best solution is to spend on an architecture of producer/consumer (events). Who uses two parallel loops. The producer has the one and the only structure of the event and passes orders to consumer loop through a queue.

  Probalby want as the mechanical action on the buttons to lock when you press. Put kiosks inside the respective case of event changed value and local variables becomes unnecessary.

  Lynn

• Requirements Gateway - objects on the front panel

  Hello

  I'm about to start using the gateway requirements and I have a few questions to help me go...

  1. If I create a vi on a machine without RG installed and then move it to a machine with the Receiver General installed, will be always recognized tags?

  2 - RG recognize the syntax [covers XX] if it's on a façade and not the block diagram?

  Thanks for your help.

  Darren.

  I know a little RG.

  1. Yes.

  2 RG will scan the three areas of a VI for references: VI Description, control/indicator Description and diagram commentary (free labels). That's why he won't see a reference on the front panel (for example data text or text of the label or a caption).

• Using the 'current default values do' as a control on the front panel

  Hello

  I'm building a VI that uses a lot of digital controls. I want to use "do current default values" as a control Boolean on the front panel for the user.

  Is it possible to implement when the program is running? What would be an alternative, if this was not possible?

  Thank you

  Mhaque

  
  

• How custumize the front panel?

  Hello

  I would like to know how I can custumize my front panel, for example to put my name on it and so on

  Thank you

  François

  Go to FILE > properties VI > category > windowAppearence.Then, you can customize the appearance of the window.

  I don't understand where you want to write your name? And what is the purpose? If you want to write anything in the doubleclick just of frontage on the façade.