NIVXD128 Soft Front Panel for DIO - 128

Similar Questions

• Usability is NOR-SCOPE Soft Front Panel for the PXI-5154?

  I am plans to use the PXI-5154 with his NO-SCOPE Soft Front Panel in a product to test instrumentation. Our past experience, our users need an on-board scope that is easy to use which does not load the CPU. In most cases the scope will be used to check a transitional type of pulses. So, the amplitudes and rise times are essential to ensure compliance with ISO standards. The ability to capture, store and recall traces of reports is important, as well as the ability to perform simple and reproducible follow-up measures. We don't expect our users to have to program the scope; "give me the waveform.

  Does anyone have any comments on the usability of the NOR-SCOPE Soft Front Panel? How to compare with other soft scopes?

  Hello!

  The scope Soft Front Panel is very user friendly and able to load/save waveforms, Load/Save settings and make the scalar measures.  I've attached a screenshot of what the front soft worn looks as well as a link to a help document on the high speed digitizer HELP.  Information on the scope Soft Front Panel lies in this document and can be found under the tab content in the configuration tree (NI - Scope Soft Front Panel help).

  Help of digitizer OR high speed

  http://digital.NI.com/manuals.nsf/WebSearch/2123F564C6DE7B27862574DE006915DE

   

• OR scope Soft Front Panel fails to load

  Hello

  I use the scope Soft Front Panel OR with my USB NI 5132 for some time successfully. However, recently it has stopped working completely - seems to load a bit then fails before you even open the screen. The same thing happens in MAX I did all the updates critical, uninstalled then reinstalled NI Scope, uninstalled Labview (the only thing I had changed after the last time, I know that it worked successfully) and checked the nitaglv.dll library was in the right place according to this post: http://digital.ni.com/public.nsf/allkb/63739991438EC593862579C6007301EC

  So far nothing's worked. I NI SCOPE 4.0 and NI-VISA 5.3.0 installed, and the computer could see successfully the digitizer USB 5132 Max after the relocation OR scope, well that the flexible façade does not always load and making the Panel test Max also does not.

  I have attached a picture of the screen to load before it disappears so that could provide clues.

  Suggestions?

  
  

• OR DC Soft Front Panel, minorbug, small bug with the PXI-4110

  Hello

  The NI DC Soft Front Panel V14.0, with the PXI-4110, scrolling to negative tension, works as expected to-10V, but then returns to 0. If we change from - 1V procedure, it goes...-8-9,-10, -1, -2... instead of-8-9,-10, -11, -12...

  Everything about her, a simple thing that I miss is a switch for all three voltages.

  (Also, IMO, it would be logical for negative tensions with the arrow pointing down, not more).

  My 2 c

  Hello Janaf,

  I completely agree with two of your statements, I tabled a report of corrective measures that you can monitor in the next versions of DCPower to see if this is fixed with the FPS. CAR number: 512257

  I've added notes that only manual insertion of numbers - less than 10 works and that it was not logical to use arrow increment or upward arrow to reduce the output voltage.

• OR SWITCH Soft Front Panel

  Hello

  I have a few questions in the following way:

  1. After installing the Switch Executive 3.6 (evaluation software), I have very large window for OR Soft Front Panel SWITCH to cover all 4 monitors. It is difficult to see. Do I have to uninstall 3.6 Executive switch (software evaluation)? We don't need that much. Is it safe to uninstall?

  Could you give me the solutuion to configure on the previous setting the Soft Front Panel, released only to a single monitor.

  2. what the Panel "pxi-2720" test should be at MAX? If I click on the test Panel, 'Switch Panel Soft' appears with the topology - '2720-independent? It looks like swich instead of test programmable resistance. Is - this Panel good criterion for pxi-2720?

  3. for NI PXI 2571, I SH200LFH-4xDB50F-C cable to connect to the terminals and tested the switches. I found the NO0 (P1 pin2) - COM0 (P1 pin1) connection is not working while others work. That is reserved by something else? I have test by exchanging terminal blocks, but the result was the same.

  I'm waiting for your answers.

  Thank you

  Insuk

  Thank you!!

• Switch Soft Front Panel, active device classified

  I have a with PXI chassis modules, two switches PXI-2350.  Using the Soft Front Panel switch, it seems that the names assigned to the list of active device (both 2350's in this case) are backward, what to expect.  Is there a way to reassociate those names to the 2350's physics?

  Thank you

  Confustus,

  It's an interesting question that I've never seen before, your devices in a Soft Front Panel should be linked to features like labels in MAX. I was wondering, when you say "we can select using MAX, a road that connects the power supply to the digital multimeter using"Switch 1"(for example), and we can see the voltage reading show on the Soft Front Panel 4071 as planned", what you mean exactly? If you had to choose your hardware device, and then click test panels, the NI Soft Front Panel load switch. Are you saying that when you choose test panels and loading Switch Soft Front Panel of max works as expected, however the application outside opening MAX does not work?

  Or are you talking about the Test panels you open in NI Switch Executive? The test for NI Switch Executive panels refer on behalf of virtual device NI Switch Executive, not the DAQmx device name. If you had named the name of the NI Switch Executive virtual device in the same way, that could be part of the confusion of the problems that you see. See the images below:

  

  NEITHER DAQmx Test selection panel that leads upward.

  

  Test NI Switch Executive Panel allows this. If these names are similar, I can see how that might be confusing.

• OR-SCOPE Soft Front Panel errors

  I can't capture a square wave 10 kHz using NOR-SCOPE FPS.  The error that I get for the manual config and auto-setup is-200580 requested is not a valid Vertical offset.

  Max test panel can capture the signal without errors.

  My setup is PXI-5154 Slot3, chassis PXI-1031DC, Windows Vista, LabVIEW 2009, MAX 4.6.0f1.  Entry test square wave 10 kHz, 4Vp - p connected to Ch0 BNC 5154.

  Hi bmann,.

  What is the descriptor of the resource able & Automation Explorer (MAX) for this device?  Is it the same as other devices that were previously on your system?

  The 5154 can't stand the vertical offset, but other devices (for example the 5152) support vertical offset.  The NO-SCOPE Soft Front Panel (SFP) will use the resources descriptor to identify devices.  If no configuration is not found for a device with a particular resource descriptor, then the FPS will run an automatic configuration on the device.  However, if the FPS is a previous corresponding configuration with the same resource descriptor, it will attempt to use this same configuration.  This is where I believe you can receive the error.

  If you have a 5152, you can check the "vertical offset" parameter in the "Device setup" window - looks like this is the setting that attempts to commit to the 5154 the SFP and the NOR-SCOPE driver is throwing this error.  For a 5152, this parameter should appear, but the 5154 this setting should not appear.

  

  Could you try to re - appoint the device in your system for something unique?

  Let me know if it helps.  If not, it could be another question - let me know what version of the driver NOR-SCOPE you have installed if this is the case.

  -Andrew

• LabVIEW version of the source code of the NOR-DCPower Soft Front Panel

  I work with an SMU NI PXI-4130. There is a front panel soft exe called the "NOR-DCPower Soft Front Panel" that can be used to control the instrument. I was wondering if there is a version of LabVIEW source code for this driver?

  Jim,

  as much as I know there is no LV source code provided for the Soft Front Panel. But there are a few examples of LV, which will be close to the characteristics of the SFP. So I suggest to you to dig in the examples you find in the Finder of the example.

  Input and output hardware > Modular Instruments > NI-DCPower.

  hope this helps,

  Norbert

• OR-SCOPE Soft Front Panel

  Hey!

  How can I include the "impedance" and "Probe atténuation" options at the front view of NOR-SCOPE?

  Now, this option run "Edit-online Device Configuration"!

  Thank you

  Patrick

  Hi Patrick,

  the soft front panels are demo applications for our various modular instrument drivers. We do not distribute their code, nor can you change their GUI.

  If you are programming with LabVIEW I would recommend that you build your own version of a scope to start with an example of our example search tool (help-> find examples). A good starting point would be the Acquisition of niScope configured EX example which also gives you a good overview of how to use the scope pilot.

  If you have more specific questions do not hesitate to ask!

  Best regards

  Peter

• Can I link an LED on front panel for a specific element in an array of Booleans?

  In LabVIEW 2010, I have a string of LED. I and array of boolean values that contain the values that the LEDs have to indicate.

  What is the best way to connect the LEDs to elements in the array of Booleans?

  Can I link an LED on front panel for a specific element in an array of Booleans?

  How this is done?

  Can someone show the code example?

  
  

• What is the pinout of connectors on front panel for my p7-1154 Pavilion?

  Hi, I would like to know this as the pinout of the connector on the front panel on Pavilion p7-1154. I would like to know it is that I'm moving my system in another case with more space, better cooling ability and space for managing cables. I strongly modified this computer.

  I intend to put my system in a Fractal Design Mini ARC. I need to know if the front panel pinout is the same or if I need to make some changes. So, the HP Pavilion p7-1154 pinout are compatible with a standard spare case? Is there a schematic pinout for arrangement of the motherboard connector, this façade?

  My computer model number is: p7-1154

  My computer product number is: QP773AA #ABA

  The motherboard is a HP Hibiscus AAHD3 HB made by Pegatron

  Here are the specs.

  * Card mother HP AAHD3 - HB (Hibiscus)

  The BIOS of the motherboard doesn't support overclocking or Dual AMD graphics card

  * AMD 3850 APU (stock 2.9 GHz OC'd to 3.6 GHz using AMD OverDrive)

  * GPU HD Radeon 6770

  * Block modular POWER of Silverstone 500w 80Plus Bronze

  * 16 GB of RAM DDR3 Corsair 1600

  * 2 x Crucial M4 265 GB SSDS in band (RAID 0)

  * 1 WD Velociraptor 600 GB 10 000 rpm HARD drive

  Thanks for any help on this matter,

  Mike

  Mike,

  Please see the diagram below for your card mother pinout;

  

  Please send Bravo

• Outsourcing of the controls on the front panel for a panel floating Subvi

  Hello!

  I already found a few similar topics, but I still don't know which is the best way to solve my problem. I will try to describe my problem in detail first: I have a main VI that acquires data from a device and displays these data in a large waveform graph. I have also a few controls on the front panel to control my device. First, I placed all of these device controls (digital, sliders, etc.) as well as the chart inside the front of my main VI. However, due to limited screen space now I would like to make the largest possible graph and so decided to "outsource" some controls out of the main façade of VI to several panels front-end Subvi.

  I would then press a button in my main VI and it would open the Panel before the floating of the Sub - VI corresponding with outsourced controls when required. However, everything must be absolutely transparent. It is important that floating panels to run in parallel with my main VI, that is the main VI must continue to operate. That way I'll have my data constantly updated in the chart in my main VI while I can change some settings of the device through the controls placed in my SubVIs. These changes will be immediately applied (for example as soon as the main VI calls this slot - VI in its main loop).

  It is important to the visibility of the outsourced optional control panel, i.e. If the Subvi front panel opens with the user that it will pop up and the user will be able to change the paramers device using the. But then the user should be able to close the front panel (hide) the Subvi to see the entire chart again without the Panel floating in front of her (of course control values must be maintained when the Subvi front is not visible). Then the new button is pressed in the main VI that opens the dialog box not modal Subvi containing controls and it can redefine new values of device.

  Advice how to do this are welcome. I don't know if I need something complex like VI server or asynchronous screws or I can solve my problem by changing some settings simple Subvi? Thank you in advance for your help!

  Best regards

  Anguel

  AStankov wrote:

  How about using a global variable for the VI at VI communication instead of a queue?

  A global variable will, also.  Write you in one place and read the value frequently to somewhere else (in the election). So you can see easily to any value change.  However, mark will waste a lot of time processor.  This is why I have proposed to use a queue or a notification utility.

  AStankov wrote:

  Would be the last option that you mentioned, i.e. finish the Subvi at each change of value, I would keep the Subvi front open as needed until things from the user to hide? Or would there be inevitable flickering Panel or any other drawbacks?

  Yes, the Subvi can keep the façade open until the user closes. And there should be no flickering.  The biggest drawback I see right now is that when you expect an event in the Subvi, the mainVI cannot stop without talking to the Subvi to stop.  So you'll need another channel of communication (again a global, a queue, a declarant or an event) to tell the Subvi that she must stop.

• Palette of symbols front panel for industrial process equipment

  Is it range of graphic symbols of front for the equipment of industrial process for LabView, including symbols for motors, heat exchangers, pumps, valves, tanks, etc., similar to that which was available with BridgeView?

  If you Datalogging and Supervisory Control (DSC) Module you'll have these controls and indicators.  The DSC module is what has replaced BridgeVIEW.

• Panel close? Event causes the front panel for not responding

  I am trying to create a simple program. Some time ago loop that generates random numbers, just so that I can see it is running. An "Exit" button is connected to an output of the while loop Terminal. The event structure is also in this loop, which intercepts "Close panel?" and don't know, then said of faithful son in the while loop output terminal. To be more precise, the output terminal takes an OR statement that takes the button leave and this Structure of Boolean event as inputs. When I run the program, the release button does not respond, however, with the highlight the part of structure of the program event execution seems to work. Sorry if I'm bad at explaining, any help is appreciated.

  I guess my real question is, how do correctly implement you that a button exit stops the loop and clicking on the red x or File: Close is ignored and rather does the same thing as your Exit button.

  The problem is that you don't have a case of timeout in the structure of your event, so he's sitting there, waiting for any registered event (in your case, the only recorded event is the closing of Panel event).  He reads your button to quit once, you should see if you run with execution highlighting.  The while loop can not continue until all that it ends and the structure of the event may not finish until an event occurs.

  A better solution than adding a timeout event is to add an event to change the value of the button exit.  Put the Quit terminal inside the case of the event and the wire which, in the same tunnel connected to stop the while loop.  If you do this there not need timer loop as the structure of the event will be sitting there waiting until the Quit button or Panel is closed.  However, if you want to add more code inside the while loop that will run continuously, then you will need a time-out event (that can take the place of waiting since the timeout will regulate the timing of the loop).

• What is the connections on the front panel for an E9180T, other responses does not apply?

  I have an E9180T Pavalion, which I placed it in a box more grand for better cool (Diabilotek), but cancel it, HDD LED, Power LED, Reset Switch and power switch does not seem to match others listed so far. When hung using these pages the button restart gives me just a blank black screen. using the power to the bottom/Power switch that causes the system to boot normally.

  This forum can now be cancelled, problem is resolved, these problems were caused by wires in the harness front of Diablotek. HDD LED wires are wired to the switch led Reset, the reset switch is connected to the power LED and the power led is connected to a Molex connector. It's a question that I will take with tem. Thanks for all your answers