Parallel printing of XP, Win 7 64 host guest

Similar Questions

• LaserJet P1505n printer: How can I change the host name to NPI1BDC68 to meaninful something more?

  My network, a HP LaserJet P1505n printer, host name is set to NPI1BDC68. Is this cable or is there a way for me to change? Trying to solve: manuals were reviewed, Forum questions were searched, google General search conducted. I am running Win XP and a Mac Pro with OS X 10.6.8.

  Well, which took me 10 minutes to solve.  I found the answer on a HP site based in France. (I kinda changed my google query and tried again.)  The site asks on first access, if you wish to continue in English, thankfully.  http://support.HP.com/us-en/document/c01175001

  In short, use Internet Explorer or Safari, go to the IP address of your network printer.  For Win XP users, you can determine the IP address using, start/printers and faxes /(select printer)/properties/ports tab / select new/Configure button/second field printer port to down the IP address shown.

  Once connected to the network printer subsystem, select the Networking tab.  The host name is the first field which can be changed. Enter a new name from 1 to 15 characters.  Tip: He doesn't like spaces. Underscores work well and the new name can be mixed case. Press the button apply at the bottom of the screen when done.  Warning appears that access to the printer may need to be changed if the IP address has been changed.  Acknowledge the warning. Printer goes offline for a few seconds. The page automatically refreshes and the new host name can be confirmed by inspection.

• Cannot print using the Win xp partition

  I've implemented the system to dual-boot. I am unable to print using the Win xp partition. Can I print using the partition in Win 7 64 bit.

  Hello

  · You receive an error message or error code when you try to print?

  Run the troubleshooter from the link and if it helps: printer in Windows problems: http://windows.microsoft.com/en-us/windows/help/printer-problems-in-windows

• Win 32 generic host error

  Hello all dear friends
  I have windows xp sp2 and here I am facing a problem
  as generic Win 32 error host
  After this error, my programs are unstable
  After that someone suggested that to move to XP SP3. So I downloaded and update to SP3. He stays here even... someone can tell me good solution to do.
  After this error. My two PC stop.
  We have a connection of 1 MB connection dsl.
  and other is running on dial connection.

  Please help me on the right. Thanks in advance.
  both have xp sp3

  lOOfER,

  http://www.Microsoft.com/windowsxp/expertzone/newsgroups/reader.mspx?DG=Microsoft.public.WindowsXP.General

  Above is a link to the XP newsgroups.

  They are those who must ask questions on your XP related problems.

  http://support.Microsoft.com/kb/894391

  See if the instructions above MS helps you foer the generic host error...

  Here is the Vista Forums.

  See you soon. Mick Murphy - Microsoft partner

• IEEE 1284 parallel printer cable

  I want to find a printer cable replace still allows the parallel port in my HP printer and the other end to a USB connector on my pc.    HP offers this configuration OR can I take my existing double parallel printer cable and buy a kind of connector that converts the parallel port of the pc to a USB port?

  What printer model?  What operating system?  (Some printers such as the Deskjet 900 series printers have a USB port that is usually not visible...)

  USB-parallel converters are available from many sources for <$20 us.=""  make="" sure="" the="" cable="" you="" purchase="" is="" supported="" by="" your="" operating="" system.=""> the models listed here have been confirmed by users to work in Windows 7.

• Printer HP CP1525nw Color Laser Jet not print wireless with Win 7.

  My HP CP1525nw Color Laser Jet printer will not print wireless with Win 7. It is not recognized as a wireless device when by Win7 'add a device '. It has worked very well in the past, but now I have to connect the printer with a cable to be able to print.

  Thank you in advance for your help!

  Sakii305

  Hi Sakii305,

  Thanks for posting your query in Microsoft Communities. The problem description, I understand that you are not able to print wireless. Provide the following information:

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         You use a third-party security software?

  Follow these methods.

  Method 1: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Follow the steps in the article.

  Solve printer problems

  You can read this article for more information:

  Why can I not print?

  I hope this helps. Let us know if you need more assistance.

  Thank you.

• vSphere hosts/guests 5 managed by vCenter 4?

  Quick question (I searched but not found the obvious answer, sorry...) and v5 hosts/guests can be managed by vCenter v4?  Or is it only that it's backward compatible (i.e. the vCenter v5 can handle low level guests/clients)?

  TIA!

  Hello.

  You will need vcenter Server 5 manage ESXi 5 and/or guests earlier.

  Good luck!

• Connect Legacy parallel printer on computer laptop w/USB Port

  Anyone with a printer HP legacy parallel port and a newer PC will have a challenge connecting the printer to the PC. The question is: can it be done and, if so, how?

  I have an old, OfficeJet - a R40xi relaiable. She has just a single interface - a parallel cable. Now, I have two PCs with no parallel port - an HP laptop and a desktop HP. Both running XP Home OS.

  Question is - is there hope using a parallel cable series on the laptop or a parallel to USB cable either?

  I suspect that Windowz XP and the driver of HP will not 'see' the printer on the serial or USB ports. Before that I go out and buy cables and pass the TIME, trying to get the system to work, I thought I would ask the advice of EXPERTS. Everyone out there knows?

  One option that I still have is to install a parallel card in the desktop PC. I don't know if there is a parallel PCI card for the laptop, but I can watch using GMBMG.com.

  TIA.

  Ko

  here ya go to start. Google may be a spy, but sometimes he is your friend

• for win 32 generic host process services

  How can I fix this error... there two my PC freezes at the point of having to unplug the computer.

  Hi tapperjo,

  ·        When exactly do you get this error message?

  ·        What is the full error message that you receive?

  ·        You did it of any material changes or software on the machine prior to this problem?

  ·        How long you have been facing this problem?

  This problem may occur if you use an old HP printer driver or an old HP scanner driver.

  If you are using an HP printer, you can follow this link.

  Generic host process error message and a flashlight icon appear

  To improve the performance of the computer, you can follow this link & check if it helps.

  Restore the performance of your computer with Windows XP

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Printer 6540 on win 7

  I have a printer 6540 - better and more reliable I've ever had.  Just got a Windows 7 to replace my XP.  The printer says Win 7' is not supported. "(98, 2000, ME and XP are included on the installation disc.)   Is that what I can do to use the printer?

  Hello

  You will find windows 7 drivers for your printer here.

• Windows 7 connection parallel printer laptop USB - someone at - it managed?

  I want to connect my printer Deskjet 722C for my new laptop Windows 7 USB port parallel port.    Has anyone linked successfully an old HP parallel port printer to a Windows 7 computer.  If so, what cable did you use and what have you got to do to make this work?  The others don't seem to be for Windows 7 and also seem to indicate problems in general.  Apparently, it is not as simple as a connecting cable.

  There are two possible problems here.  First of all, if you are using the 64 bit version of Windows 7, you need to apply the patch here.  There is a bug in the supplied driver that causes the spooler crash in x 64 versions of Vista or Windows 7, the patch corrects this problem.

  Second, as mentioned above the USB-parallel cables, converters can be problematic.  Make sure that the model you have is supported in Windows 7.  The links here have jobs where people are models of converters used successfully with Windows 7.

• How to set up a parallel printer to a USB port?

  Hi people... I'm putting in place our old faithful Laserjet 5 p with our new G70 using a USB to parallel cable, but nothing is. Any ideas on how to configure this odd couple so that they can live and work in harmony? My wife would ruin me rather than having to give up his printer.

  Eureka! The TRENDnet TU-P1284 Converter is a plug and play printer inherited to new computer of mating. As a reminder, I have a laptop HP G70 running Vista Home Basic and a HP LaserJet 5 p printer and when I wired everything up, the computer recognizes the printer, install the correct driver, and I was off and running. The adapter is less than $20.00 per Amazon.

• How to get the driver to a parallel printer using windows update without a parallel port on my laptop?

  I have an asus WL500g and I use it as a print server. On my big pc on windows 7. I managed to install the driver on the printer directly on the pc connection an update of windows to get the driver of the Sina. After installing the driver I passed it to the port by using the ip address of my router. It works, but my laptop doesn't have a parallel port, so it is not possible to obtain the driver. What can I do?

  You do not want drivers for parallel port on the laptop anyway given that the laptop is not connect via the parallel port, but rather on the network. You would most likely want to install drivers on the laptop Asus print server, and then print to a network printer drivers. Download the Asus former and latter printer mftr. MS - MVP - Elephant Boy computers - don't panic!

• Dell 2230 Laser Printer sometimes I get this message: host driver printer for 32 bit applications has stopped working.

  Recently, I started using a new computer - a Dell Precision M6700 with Windows 7. Previously, I used a Dell with Windows XP and had no problems with my printer. Now, I have intermittent problems with get this printer to work. Sometimes it works fine, but sometimes, I get this message:

  Host driver printer for 32 bit applications has stopped working. I clicked so he could find a solution online, and it is never able to find one. I just get another message that says:

  An unknown error occurred while printing.

  Problem event name: APPCRASH
  Application name: splwow64.exe
  Application version: 6.1.760.1.17777

  Do you recognize this problem and is there a solution?

  Hello

  I suggest to go through the steps from the link provided and check.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 2:

  If the problem persists, you can also run a full scan using the Microsoft Safety Scanner and check.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: there is a risk of data loss if all the files are infected and which can be removed in the cleaning process.

  You can also contact Dell to:

  Product support

  http://www.Dell.com/support/troubleshooting/us/en/04/troubleshooting/ProductSelector

  Hope this helps and keep us posted.

• Vista printer driver error Digital Imaging Monitor host process

  Computer: HP Pavilion S3300F

  OS: Vista Edition Home Premium

  Printer: HP Photosmart 2610

  I often get the following error window:

  "Host process for Windows Services stopped working and was closed: a problem caused the application to stop functioning properly." Windows will notify you if a solution is available. »

  After clicking on [close] the following is displayed on the bottom right bar:

  "Host process for Windows Services has been closed: to help protect your computer, Data Execution Prevention has closed host process for Windows Services." Click to learn more»

  After clicking, a window of "Windows Help and Support" appears with "what is Data Execution Prevention"?

  Today the "HP Digital Imaging Monitor" has been closed as well.

  Turn off DEP in Vista and run the Setup again:

  1. click on start
  2. click on all programs
  3. click on accessories
  4. right click on command prompt
  5. click on run as administrator
  6. click on the button allow if application you for leave
  7. type or copy and paste this into the command prompt window:

  bcdedit.exe /set {current} nx AlwaysOff
  

  8. press enter and you should see the confirmation: operation completed successfully
  9. reboot and DEP should be turned off.