Parallelism with RMAN multiplexing
Hi all
On top of topics, this means,
Equivalence of parallelism to allocate no.. wire to allocated channel whereas maxfilesopen means no. reading by time of input file and fileperset means no. writing by time of tapes/discs.
May I know what are the relationships between the parallelism and maxfilesopen + filepreset.
Do mean allocate no.. of threads allocated for read write the process in general?
Thank you
StarterAman
Speaking of RMAN it is confusing to use the term parallelism and threads.
On the contrary, the correct terms are:
channel is a pipe to a physical output device. If you have several physical output devices, so you can have several channels simultaneously running. Each channel is associated with a session.
maxfilesopen (IE multiplex) corresponds to the maximum number of simultaneous files that can be read simultaneously for a channel. No matter how many files by channel multiplexing - there is still only 1 session / channel. By default the multiplex = 8 files per channel.
filesperset is simply the maximum number of files that can be written in a backupset. Unsaved files are written in an another backupset. Default = 64 files per set.
Tags: Database
Similar Questions
-
The benefits of using "CONFIGURE DEVICE TYPE DISK PARALLELISM" with Rman?
Hello Peeps, DBA, ect...
I'm doing backups to run faster in general.
I would like to know if I put this setting within rman, it would increase the speed backupset all the?
If not, then what is the point?
Thank you
Xevv.
Can someone give me some of their "Own" experiences an example then they increased this setting and noticed gains just did...
Is there no need to re - write my post, that your "sarcasm Saracens subtle, but open" is not appreciated.
You do not have control or taint this thread, next time, If you want to be a jerk-WAD of control do not respond...
-
Two questions relating to the archive redo logs with RMAN backup
DB version: 11g
I am new to RMAN.
My database is in ARCHIVELOG mode. I intend to make a weekly backup for my db (02:00 every Monday). There will be all the incremental backups between these windows(Monday-to-Monday) of backup that I have would function for retrieving archived redo logs.
Question1.
I want to save the archived logs every day (for example at 23:00). How can I configure that?
These are the configuration setting, that I intend to implement. I don't know how to set up the archive log backup
Question2.configure default device type to disk; configure retention policy to redundancy; configure device type disk parallelism 1; configure channel 1 device type disk clear; configure channel 2 device type disk clear; configure channel 1 device type disk format '/u05/rman1/datafiles/rmnabackup1_%U'; configure channel 2 device type disk format '/u05/rman2/datafiles/rmnabackup2_%U'; configure controlfile autobackup on; configure controlfile autobackup format for device type disk to '/u05/rman1/control_files/rmnabackup1_%U';
After that a new full backup is taken at 02:00 on Mondays, the archived redo logs accumulated since the last 7 days become unnecessary. How can I automate the removal of the archive redo logs with RMAN?Archive the log delete them all input command will take the destination of the log archiving log backup archive and delete this destination.
In the log archive destination he has archived log in the sequence 1 to 100 then will he take the backup and delete any of the destination (Monday 23:00).
In the log archive destination he has archived sequence journal 101 to 150 then will he take the backup and remove those in the destination (Tuesday 23:00).
In the log archive destination he has archived log in the sequence from 151 to 180 so will he take the backup and delete any of the destination (Wednesday 10:00).
It will continue like that.
Concerning
Asif Kabir-If you help brand the response as correct/useful.
-
When will come out parallel with a new update to work with Apple OS Mountain Lion
When will come out parallel with a new update to work with Apple OS Mountain Lion
Since it is an Apple product, contact Apple.
-
Is it possible backup 11g r1 DB and Recover to12c r1 with RMAN?
I'm trying to save the old server to the new.
Is it compatible to migrate Database 11.1.0.6 to 12.1.0.2 with RMAN?
RMAN restore and recover a previous version of backups. See the compatibility matrix RMAN to https://docs.oracle.com/database/121/RCMRF/compat.htm#RCMRF1949
All output data base Oracle can restore backup sets and copies created by any prior release of Oracle Database.
However, in order to open a database, the data must match the version of the Oracle binaries. If you restore and recover a previous version of the database, you will need to update database permission to open it.
RMAN cannot upgrade and migrate a database, but you can use the wizard for DBUA do. I suggest that you only consider this document showing your upgrade options:
http://www.Oracle.com/technetwork/database/upgrade/upgrading-Oracle-database-WP-12C-1896123.PDF
Unfortunately, there is no way to upgrade direct 11.1.0.6 12.1 and you must upgrade the database to 11.1.0.7 first before restoring it. Other options, see the link above.
-
Hi experts. I know about backup of backup without rman example sets but I want to know is there a way to backup with rman backup sets.
Perhaps it works for your condition.
RMAN > backupset backup is complete before ' sysdate-1';
Kind regards
Shivananda
-
Is it possible backup backupset with rman sbt on disk
Hello
We backup data base of sbt with rman and nmda library (networker).
We want to copy the disk sbt backupset. Is this possible?
Kind regards
William
I remember that this is not possible. It was perhaps possible to redraw the rman backup and restore concepts, but there is probably no real business applications. Remember that a band or an sbt (series tape backup) is a streaming device. You can read from tape or write about a band, but you can't read and write in the same band at the same time. What syntax would you choose to perform an rman backup from tape to disk or tape to tape? Rman backup you can specify a peripheral channel of exit and entry for the use of the restore command. As far as I know, the rman backup source is the database control file and it reads no Ribbon.
-
Refresh the production database to test the database with RMAN
Hi experts,
I want to refresh the production database to test the database with RMAN. You can help me please how to do this.
I saw a lot of blog on the internet but not got a satisfactory answer.
Reg,
Thomas verrma
Thomas
Follow these steps
1. on the server target
a. Add entry in oratab
b. create init.ora for target db copy of source
c. If you use catalog
connect to the RMAN catalog, you can use the double option to clone run below
one.
RMAN > Connect target sys /
@trgt RMAN > Connect Catalog rman /
@catalog b. check that the backup connects to the source and to collect information on the elements of backup that contains the backup controlfile
c. restore the controlfile
RMAN > set DBID = xxxxxxxx (DBID of the source db)
RMAN > run
{
allocate channels ch1 type parms 'SBT_TAPE' = 'ENV = (NB_ORA_CLIENT =
-
ORA-25408: can not read the appeal during a duplicate backup with rman catalog database safely
Hello
I did a database duplicate backup with rman catalog connection and got the ORA-25408: cannot read error call safely.
The catalog database is running in a Data Guard environment.
During the double process database failover occurred because of a server restart.
The restore of the data files was successful:
RMAN-08023: channel t1: restored the backup part 1
RMAN-08180: channel t1: restoration complete, duration: 00:01:15
RMAN-03091: finished the restoration at 27.08.2014 09:27:10
During execution of script memory:
RMAN-08161: content of the Script from memory:
{
switch from clone datafile;
}
RMAN-08162: execution of Script memory
I got this error:
RMAN-08162: execution of Script memory
RMAN-08031: output channel: t1
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-03002: failure of Db in dual at 27/08/2014 09:27:10
RMAN-05501: abandonment of duplicate target database
RMAN-03015: an error has occurred in the script stored memory Script
RMAN-06004: ORACLE recovery catalog database error: ORA-25408: cannot read safely call
Dual boot time: 16:00
Failover time: 18:00
Error time: 09:00 the next day
DB version: 11.2.0.4.0, not the RAC environment, single instances
That's happened? My My db catalog rman session did not survive? Why the error happened at 09:00 (and not 17:00)? Why the session called the catalog rman during switching of the data files?
Can someone explain it to me?
Thank you!
Hello
The connection of the RMAN catalog remains inactive during the backup/restore process, once rman completes the task and try to activate the connection it gets error.
What is expected as you said the rebooted server. If this happens because of the expiration time, we went with the parameter net expire_time to maintain the connection.
Thank you
Bigot
-
blockrecovery with RMAN in 11 GR 2 does not work
11 GR 2,
ANY, 5, 64 bit, 2 RAC nodes. We assist to block in our database, but we are unable to recover with RMAN,
{code}
SQL > select * from v$ database_block_corruption by 1,2,3,4
2;
FOLDER # BLOCK # BLOCKS CORRUPTION_CHANGE # CORRUPTIO
----- --------- ------ ------------------ ---------
455 1509009 1 0 CORRUPT
455 1509013 1 0 CORRUPT
455 1509015 4 0 CORRUPT
455 1509021 1 0 CORRUPT
455 1509023 1 0 CORRUPT
455 1509086 2 0 CORRUPT
455 1509090 1 0 CORRUPT
455 1509092 4 0 CORRUPT
455 1509097 2 0 CORRUPT
9 selected lines.
{code}
RMAN > BLOCKRECOVER DATAFILE 455 BLOCK 1509086,1509090,1509092,1509097;
From pick up to May 1, 14
using channel ORA_DISK_1
starting media recovery
media recovery complete, duration: 00:00:00
Finished recover at May 1, 14
RMAN > exit
{code}
RMAN is not able to recover the corrupt blocks, I don't know about that. We do not use RMAN to our backups (using snap backup). I just connected to the RMAN prompt and tried recovery. I may be wrong on
that we do not have previous backups of the database. Do we need previous backups to recover blocks? Clarify pls,
Thank you
Hari
block recovery is like data file recovery and data recovery - all of them are based on database backups and archivelogs.
Hemant K Collette
-
How to make a backup of the database with RMAN Oracle Single Instance
People,
Hello. I use the server of Oracle 11 GR 1 material with operating system Oracle Linux 5.10 database.
I understand how to back up the database instance in SQL Server with Windows. But do not really understand how to back up the database instance in Oracle on Linux.
I did it cold and hot backup for the database HRCS90 instance, but both receive the same error message.
Cold backup is below:SQL > startup
ORACLE instance started.Total System Global Area 538677248 bytes
Bytes of size 2146024 fixed
528482584 variable size bytes
4194304 buffers of data bytes
Redo buffers 3854336 bytes
Mounted database.
Open database.
SQL > shutdown immediate
The database is closed.
The database is dismounted.
ORACLE instance stops.
RMAN > backup database;From backup 25 November 13
using the control file of the target instead of recovery catalog database
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-03002: failure of the backup command to the 25/11/2013 14:26:52
RMAN-06171: not connected to the target database
RMAN > backup HRCS90RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-00558: error occurred during parsing of order entry
RMAN-01009: syntax error: found 'distinctive sign': expected an of: ' archivelog, auxiliary, as, backup backupset, blocks, channel, check, copy, copies, controlfilecopy, cumulative, current, basic data, datafile, datafilecopy, device, diskratio, db_recovery_file_dest, db_file_name_convert, duration, filesperset, for, format, from, full, strength, file, incremental, keep, (, maxsetsize nochecksum, noexclude, nokeep, not, proxy, pool, re-use, recovery, section, skip). ', spfile, skip readonly, setsize, tablespace, tag to validate.
RMAN-01008: the identifier of the AfDB was: HRCS90
RMAN-01007: line 1 column 8 file: entry standard
RMAN > backup database HRCS90RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-00558: error occurred during parsing of order entry
RMAN-01009: syntax error: found 'distinctive sign': expected an of: ' archivelog, auxiliary, backupset channel, copy, controlfilecopy, backup, common, base data, data file, datafilecopy, remove, diskratio, db_recovery_file_dest, filesperset, format, force, file, include, keep, (, maxsetsize, noexclude, nokeep, not, pool, more reuse, recovery, section, skip, spfile, pass readonly, setsize, tablespace, tag, to).
RMAN-01008: the identifier of the AfDB was: HRCS90
RMAN-01007: line 1 column 17 file: entry standardWhile the instance of database HRCS90 is starting, I do hot backup by using the same commands and get the same error message with above cold backup.
My question is:
Can any folk tell me specific steps (order by order) to back up a single instance of the database in Oracle with RMAN?
Thank you.Yes, you can restore and recover the backup, but not at the moment. You will only be able to restore and recover at the time of your backup.
For example.
If you take backup (mount point with no mode of journal archive) at 06:00 and your grave database crashes at 21:00, you will be able to restore and recover until 06:00. You will find all the changes made to the database between 06:00 and 21:00.
If you want your database to recover until 9 PM or until a point in time, then you must put your database in log mode archive, and then save the archives.
-
We use the Oracle 10 g R2 on Linux.
We have a database of development which is mode without archival value. Can clone us this database without stopping it with RMAN.
No, you can't take any form of online backup without in archivelog mode. BackupSets would be blurred as data files are backed up to the different SNA.
-
Problem creating physical standby with RMAN
Hi guru
Perhaps this impact that all face you when creating physical standby DB. I'm trying to create a physical standby database Using RMAN double order a server
(pri machine) machine on standby.
Here are the steps I followed to create the above:
Step 1:-activate forced logging
SQL > ALTER DATABASE FORCE LOGGING;
Step 2:-set up a standby Redo Log
SQL > ALTER DATABASE ADD STANDBY LOGFILE GROUP 10
2 > ('/ oracle/dbs/log1c.rdo','/oracle/dbs/log2c.rdo') SIZE 500 M;
Step 3:-set the parameters of primary database initialization
SQL > create pfile='?/dbs/pfileorcl.ora' of spfile;
Edit the pfile to add the sleep settings, shown here:
db_unique_name = "orcl".
LOG_ARCHIVE_CONFIG = 'DG_CONFIG = (ORCL, orcldr)'
LOG_ARCHIVE_DEST_2 = "SERVICE = orcldr LGWR ASYNC VALID_FOR =(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME = orcldr'"
* .fal_server = orcldr
* .fal_client = orcl
* .standby_file_management = auto
Step 4:-activate archiving
SQL > SHUTDOWN IMMEDIATE;
SQL > STARTUP MOUNT;
SQL > ALTER DATABASE ARCHIVELOG;
SQL > ALTER DATABASE OPEN;
Step 5:-tnsnames for eve of the configuration database
This should be done on the primary database to edit tnsnames.ora or using the command NetCA and create by the name orcldr
orcldr =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP) (HOST = Eve-svr)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcldr)
)
)
Step 6:-backup of database and copy it to standby mode
This backup script must be run on primary and copied to sleep on the same mount point, run these scripts with RMAN, all files in /rman_backup need to be copied in /rman_backup on the standby server.
$rman target.
RMAN > run
{
allocate channel c1 type disk;
allocate channel c2 type disk;
backup of database format ' / rman_backup/%U';
ARCHIVELOG backup all the format ' / rman_backup %U ';
backup current controlfile to Eve format ' / rman_backup/%U';
}
Step 7:-availability of measures database
Installation of Oracle software
This should be the same version and patch group with exactly same ORACLE_HOME mount point.
Commissioning of the listener
Create and start a listener on the database of sleep by using NetCA, or create listener.ora in $ORACLE_HOME/network/admin
LISTENER =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP) (HOST = Eve-svr)(PORT = 1521))
)
Step 8:-set of backup database initialization parameters
Copy the pfile file created in the database primary it renames in initorcldr.ora and change these settings:
db_unique_name = "orcldr".
LOG_ARCHIVE_CONFIG = 'DG_CONFIG = (orcldr, ORCL)'
LOG_ARCHIVE_DEST_2 = "SERVICE = orcl LGWR ASYNC VALID_FOR =(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME = orcl'"
* .fal_server = orcl
* .fal_client = orcldr
*. LOG_ARCHIVE_DEST_STATE_2 = 'ENABLE '.
Step 9:-installation tnsnames for the primary database
This should be done on the pending change tnsnames.ora or using the command NetCA database and create it in the name orcl
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP) (HOST = primary-svr)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
)
)
Step 10:-copy a password file
A password file must be created on the primary and copied to the standby site. The sys password must be the same on both sites. Copy orapworcl in $ORACLE_HOME/dbs and rename the file in orapworcldr
Step 11:-create for Oracle mount points
Mount point must be created on the standby server with the same convention used in primary education, which includes the location for controlfiles, redo logs, data files, destination of the newspaper Archives and alert logs.
$ mkdir Pei/u01/app/oracle/oradata/orcl /.
$ mkdir Pei/u01/app/oracle/flash_recovery_area /.
$ mkdir Pei/u01/app/oracle/admin/orcl/adump
$ mkdir Pei/u01/app/oracle/admin/orcl/bdump
$ mkdir Pei/u01/app/oracle/admin/orcl/cdump
$ mkdir Pei/u01/app/oracle/admin/orcl/udump
Step 12:-use RMAN to restore the backup and standby configuration
Connecting to RMAN and run the following command to create the database pending, this must be performed on the standby server after the backup copy and the tnsnames parameter.
$ export ORACLE_SID = orcldr
$ rman target sys/tiger@orcl auxiliary sys/tiger@orcldr
RMAN > target double standby database dorecover;
Here, I'm getting problem such as:
While he was trying to connect to databases traget and auxiliary, I noticed that when RMAN is connected across the two databases it shows
ORCL (DBID xyz)
ORCL (unmounted)
Here, in my opinion the second database must be the name of the standby database or auxiiary db name is Eve db which is orcldr in my case
After this issue, I am faced with the second issues such as:
in command
target double standby database dorecover;
After you change the command to
RMAN > duplicate target database "sleep."
RMAN-05520 database name mismatch
Can u please let me know where I can be wrong
Finally I have the problem after all this googling and thinking the same thing.
Thanks to you all
-
Hello
We currently use RMAN scripts to back up our 11 GR 2 as Linux RAC databases to ASM. My company is thinking using Netbackup for data backup.
How does the netbackup with rman? One way I can think is RMAN will backup of database in ASM and netbackup will recover backups from the box of ASM and passes it to a remote site (I don't know if netbackup can read ASM).
Are there other ways I can use netbackup with or without RMAN?
Thank you in advance.
No. I say that rreads RMAN frfom of ASM data files and sends them to NetBackup. NetBackup disseminates the incoming bytes on tape.
Hemant K Collette
-
Cloning of Oracle database with RMAN
Hello dear colleagues,
I intend to clone my PROD database to create a database of emergency with RMAN, the situation in the present case, it is that I want to use the same db_name so create spfile scp to the target server, run a level 0 backup dB, create the same file structure as well, but I'm confused because when I connect to RMAN to perform cloning as you can see...
RMAN> connect auxiliary / connected to auxiliary database: prod1 (not mounted) RMAN> connect target sys/passprod1@prod1_ORI connected to target database: PROD1 (DBID=somenumber)
RMAN> run { allocate auxiliary channel c1 device type disk; allocate channel c2 device type disk; duplicate target database to 'prod1'; }
-Is it possible that crushes my source PROD1 database
-C' is ok, if I run the clone with the database of the source open with few users working? Even he will operate a backup, this will obviously have a performance impact but also the integrity of the data? I'm not sure what other files of this procedure will be used in clonning.
-Should I enter into channel c2 backup full path to the source server?
I enjoy any help and thanks in advance.
Documentation:
http://docs.Oracle.com/CD/E11882_01/backup.112/e10642/rcmdupdb.htm#i1008564
Backup the basic replication does not require the same password (file)
If duplication to a host remote and demanding that the same file names and paths created, then integrate the NOFILENAMECHECK.
Hemant K Collette
Maybe you are looking for
-
iOS 10 zoom causing the shift &; blocking problem
Hello I have several devices running iOS 10 ranging from a 5 iPad iPhone mini 4, to iPhone and iPad Air 2. I noticed that when the zoom toggle in the settings is enabled (whether zoomed or not), I feel an enormous amount of lag, tactile and inaccura
-
Re: How to restore to factory on my Satellite L40 - 18Z?
I'm trying to restore my laptop to factory settings; It's a Toshiba Satellite L40 - 18z. I tried the F8 procedure it did not work, also was in backup and Food Center, but it leaves me only the backup files. I guess I m going to need a disc, I'm OK, a
-
Strange devices satellite U300-15 after the new installation of 64 bit Vista
I just got my Toshiba Satellite U300-159 (model No. PSU30E-07901NN5) It was a display model used in the store where I bought, so I wanted to do a clean install.Using the recovery cd did not work. (Something about some files than couln can't be read).
-
Windows XP and using the Xbox 360! How can I configure xbox 360 on windows XP, all instructions are for Media Center which I did not and asks the key code. I don't have media player. I received a key to the xbox code, BUT Media Player do not ask for
-
HP pavilion HPE-H8-1212: power upgrade graphics card is it useful?
I currently have a HP pavilion HPE-H8-1212 with an AMD Radeon HD 7450 card with the standard power supply provided with the computer. From now run many games on this machine with what graphics settings be better then adverage is a sad screen. I don