Parameters for a big screen project

Similar Questions

• How can Firefox default to a different zoom for a big screen setting?

  I use Firefox as my default browser on my IMac 27 ", and it works well. I need the default value for a more zoomed in parameter. I know that I can zoom in using the "command +", but I am obliged to do after each screen. How can I change the default setting for a bigger screen of Firefox every time, compatible with thin and thick pixeled to 2560 x 1440 display?

  I use Firefox 7.0 Mac OSX 10.7.1, on a mid-2010 27 "IMac with a cpu I7 and 16 GB of RAM.

  Thank you!

  Try:

  • Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/

• Questions of parameters for the added control - project version

  Hello

  My fellow designer and FINALLY got version control/robosource 3.1 put in place on our Robohelp project. What a difference! Now, I have a few questions about the settings. We all have two connection to the Robohelp file shared on a server database. We would now have our a copy of the project on our local machines or not we keep a case on a shared server/player? I ask because our version control is originally Robohelp at startup and perform updates very, very slowly (20 minutes to start).

  I also, parameters marked to allow a user to check out a file at the same time (we are unwilling do a lot of fusion, as there's only two of us working on over 1,000 topics). When I try and import or create a new file, I get an error that the "* / root.fpj ' is in use and cannot have multiple extractions. What can I do about it?

  Thanks for your help!

  Hi, Mollyid

  Rick and Amebr have made some excellent points. It happens that I've worked on a few demos of Adobe Captivate, illustrating the basic techniques for the getting started with RoboSource Control.

  Each is approximately two to three minutes long.

  It shows how a new project is added to RoboSource Control for the first time:

  http://www.showmethedemo.com/tutorials/RSC-Add1stTime/

  This one shows how Open a project that is already at the source control in your working on your local hard drive folder.

  http://www.showmethedemo.com/tutorials/RSC-OpenProj1stTime/

  I will be tweaking these demos in the coming days, but I think that they lay down the basic ideas.

  Suggestions for improvement are welcome as I refine these demos.

  John

  John Daigle
  Adobe Certified RoboHelp and Captivate instructor
  Evergreen, Colorado
  http://www.showmethedemo.com

• I can't sync my phone I have with my I - pad for FaceTime... How can I use the I - pad for the big screen? Thank you!

  I can't sync my I-phone (I - phone 5) with my I - Pad Mini for Face Time... of ideas? Thank you!

  I'm confused... you need not so much to do something

  http://help.Apple.com/iPad/9/#/iPad6b71e29e < make and receive calls FaceTime

• How can I stop iMovie 10.1.1 from my clips big screen media cultures when I move them to the component of the project (window)?

  I am currently creating a short reel demo/culmination of a feature-length independent full length on my iMac.  The format of independent film is on the big screen and it appears this way in the media window/pane.  But when I take leave of this wide screen support and move clips / add them to the window/pane project and strengthen so the demo highlights reel, clips no longer appear on the big screen - looks like the clips (proportions?) have been cut.

  How can I stop this from happening?

  Thank you!

  If you set 'Placement of Photo' in iMovie preferences to 'Fit' rather than 'Fill' (which I think may be the default) then all your video content will be visible, but you will have bars on it and if the aspect ratio is wider than 16:9.

  

  For clips already in a timeline, you can change the setting to 'Fit' with the crop tool:

  

  Geoff.

• AVI won't get on the big screen

  I have a Nikon D300S camera that shoots 720 p 24 video in AVI HD widescreen.  When I import into Pre9, it is widescreen.  But when I export to my computer, no matter what I try, it does not have as wide-screen.  I selected NTSC widescreen in outsettings, also changed advanced setting to render at maximum depth.  Changing the settings for importing DSLR 720 p 24 AVCHD 720 p 24.  Nothing works.  Comes to the big screen, not turn off (unless I use mi/gal on).

  Can anyone help?

  YPP

  Thank you for this confirmation.

  OK, just to make sure I'm following correctly, you work in a HD = 1.0 (square pixels) project and are down-rezzing NTSC DV - AVI screen 16:9 wide BY 1.2 =, but become Standard 4:3 with NORMAL = 0.9. Is this correct?

  Good luck

  Hunt

• Satellite P20 S203 - where can I get the cover external big screen?

  Hi all

  Anyone know where to find an outer cover of the big screen Satellite P20 S203?

  I broke it because I disassembled all the pc some time ago, and as I can see now that I took out the black cover around the screen. I forgot to screw the 2 screws on the hinges that make it able to open and close. It is only broken on one of the screens, hinges, so the pc is still usable, with appropriate caution, I can still open and close, but sooner or later, I think that the other will be too broke, opening and closing of the screen all the time, so I have to replace it
  .
  Hope someone can help me.
  Good bye

  Hello

  I'm not sure what cover you mean exactly, but you can get all the spare parts to an authorized service provider. On the Toshiba page, you can find a list of them.

  You must only contact them by phone, for example. Explain the situation and maybe they can send you a new cover.

  Welcome them

• Portege M200: big screen via the port replicator

  I have a Portege M200 with APR III. I realized that the DVI Jack does not work with it, even if for some reason any, even though they are not supposed to all other ports don't. EACH of them!

  What I'm asking today is how the hell can I get the laptop out on the big screen through the APR? I tried everything, it has the chipset nVidia go 5200 FX (which is able to output DVI according to nVidia)

  I just got a Philips 20 "widescreen TFT and got tired of watching her in the stretched standard resolutions.

  One of my friends has also Tosh lappy, but it's a Tecra 9100, which will be released on the big screen without any questions whatever it is standard, it appears as an option in the Billboard settins. In addition, nVidia say that this chipset is capable of custom resolutions, but I can't find it in the updated anywhere driver.

  Can anyone help?

  Hello

  Well the Tecra9100 is not a Portege M200. Are completely different books.
  The M200 protected does not support these interfaces.
  This is a technical limitation, that the port of mouse PS/2 keyboard PS/2 port, serial port, I Link (Firewire) port and DVI port
  will be not supported on the Advanced Port Replicator III, if a protected M200 is moored.

  The following ports are supported and can be used:
  Line-in Jack, taken Line-out, USB port, port external monitor, parallel port, taken Modem, LAN jack, DC IN 15V, housing for security lock, locking the computer.
  In the documentation for the Advanced Port Replicator III is a 'fact sheet for III Advanced Port Replicator"sheet where this limitation is descripted.

• Iconia w4 820 screen project works on extend no duplicate

  If I get only audio, no video. looked at the answer elsewhere on the community and apparently the answer is to download and install update to-pilots. 2 questions:

  1. in the event that I haveto it when my tab is less than 2 weeks?

  2. I can only download intall, the only options I get after downloading to open or save the downloaded files.

  Feeling frustrated as the only reason why I bought this tab should be able to use widi project to my TV to feel disappointed by this product now. Any help gratefully received.

  TYIA

  Hi Billsey, just thought that I let you know that I managed to stir things - the problem wasn't the difference in resolution between the tab and the TV screen I finally got extended work of the screen and the image is very good - not top quality but perfectly watchable for tv catch-up/movies etc.  Just thought I would come to you as you were kind enough to help me and in case it is of use to anyone else having the problem.  The display settings have been set so that the second screen is the main screen, so as soon as I launched widi my the tablet screen went black - still sensitive to the touch but black so in trying to change the settings I was shooting blind - I could see that the TV screen and trying to control it through a black screen.  Ultimately I disconnected projection so that my screen became visible, optimized my touch settings to make my touch screen more visible on a screen projected, re-connected the second screen, and this time, although my screen was black, I was able (after a long while of the violin with her) to restore the settings to see the tab the main screen.  Unfortunately, each solution has its share of problems but as it is essentially a different problem (extended to not duplicate TV screen and TV is no touchscreen and the mouse pointer is not visible on the large TV screen I'm back to blind shooting again) I started a new discussion.  Thanks again for your help.

• fonts on the big screen - how to change screen font size?

  original title: police of the big screen

  my icons have inlarged, just like my page to the screen.  I can make the inside of the smaller screen, but how do I change everything back to normal size?

  Hello

  try going to your graphic card manufacturers site or computer and are looking for the driver download section

  Search your computer or graphics card model number based on what you have and download and install the latest graphics drivers for vista

  then try to make the screen of solution of problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-resolution

• MOD does not play on the big screen in Windows media player.

  I have a JVC's Everio camcorder and record in the MOD file.  The file was on the big screen but when I copy it to my PC and play in Windows Media Player, it shrink.  How can I solve this problem?  It's good that if I play the file in the software provided with the package.

  Help, please. Thank you.

  Hello Qooqoo81,

  Thank you for visiting the Microsoft answers Site.

  In addition to the response of aziz, you can use your favorite search engine to search for a program that converts the mod file to a file type that supports Windows Media Player.

  In addition, you can view the below link provided by the manufacturer of the device that includes additional information to play the video files on your PC.

  The Everio/Standard definition

  I hope this information is useful.

  Thank you

  Mary
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP pavilion g7: big screen of a computer hp laptop pavilion g7?

  My wife needs a big screen for work with high volumes of spreadsheets. What model of Hp widescreen moniotor can he plug his computer hp laptop pavilion g7.

  Hello

  Big does not mean she can cover a lot of information, you need large and the highest resolution too (more expensive). See the following list:

  http://h20386.www2.HP.com/AustraliaStore/merch/list.aspx?SEL=Mt&CTRL=f&JumpID=ps_vk5wa1znsu&gclid=CLGWl4SPgcYCFVWVvQodDw4A9Q

  Kind regards.

• How to do a zoo tycoon 2 big screen

  I searched the internet trying to find out how to make my 2 fill game zoo tycoon ultimate collection the screen! I tried to change the resolution in the game and via the options of the computer, but nothing works. We thought one of the hotfixes can be manipulated, but my version of the game is 33 something, and the task is apparently already installed (colonel Ultimate I guess)

  I know that we must work in a way such as;
  (A) my friend has the same res screen than I (1366 x 768) and his works perfectly
  (B) it worked when I got the base game and ARE installed (which was well back in 2011)
  I have a laptop Dell studio 1555, res screen of 1366 x 768, windows 7 etc. My PC is in line with all the system requirements.
  I bought ultimate collection I lost my base game and had an expansion pack anyway. It used to be big screen and all over the internet people recommend the installation of the base only game and then fixing the problem, but I can't do that everything is installed at the same time.
  Well, I don't want to have the full screen, but the edge-scrolling does not work with the black bars on the side D:
  Any help? :)

  Hello

  1. have you updated any drivers in the computer?

  Run the following method and check if it helps.

  Method 1:

  You can also try to update the drivers to display the Device Manager and check later if the problem persists.

  Update the display driver card:

  a. click Start.
  b. in start search box, type devmgmt.msc , and then on enter.
  (c) in the Device Manager window, expand display adapter.
  d. right-click on the installed display adapter .
  e. click on Update driver software and select the option to search automatically for updated driver software.
  f. restart the computer after the update and check if the problem is resolved.

  See also:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  Hope this information is useful.

• I want to hang the Tower up to my big screen and instead of using a keyboard, I bind a tablet that I can use as a keyboard and to manipulate objects on the screen in real time

  I am in the middle of do a remodeling and think about a furture upgrade my PC at home, I want to hang the Tower up to my big screen and instead of using a keyboard, I want to connect a tablet that I can use as a keyboard and to manipulate objects on the screen in real time. Is there a way to do this?

  (1) before the PC upgrade, please read the complete technical documents for all devices

  you want to go to upgrade

  (2) it is the first thing to do to make complete lists of materials you want to change.

  Compare specifications detaily, note important diference between many of the same features

  (3) for more information on some devices and materials, see link below

  http://www.Microsoft.com/en-us/Windows/compatibility/WIN8/CompatCenter/home?language=en-us

• big screen iOS 9.0 problem

  big screen iOS 9.0 problem

  [email protected] does not work on iphone6. 320 x 480

  And is there any news update 64-bit?

  When I try to download my application with the "Application Loader" I encountered an error. It is said:

  "ERROR ITMS-90096:" your binary is not optimized for the iPhone 5 - new iPhone apps and updates of application submitted must support 4 inches on the iPhone 5 and include a launch image with the size-568 h modifier immediately following the portion images launch filename. " The launch images must be PNG files and located at the top level of your package or provided with each .lpfoj folder if you locate your images of launch. Learn more about support for the iPhone 5 and app launch images by reviewwing 'iOS Human Interface Guidelines' to 'http://developer.apple.com/library/ios/documentation/UserExperience/Conceptual/MobileHIG/I consImages/IconsImages.html#//apple_ref/doc/uid/TP40006556-CH14-SW5' and the 'iOS App Programming Guide"to"https://developers.apple.com/library/ios/documentation/iPhone/Conceptual/iPhoneOSProgrammi ngGuide/App-RelatedResources/App-RelatedResources.html#//apple_ref/doc/uid/TP40007072-CH6-SW12". »

  I have no idea what could be wrong. The application is running in developer mode good. My info.plist XML file looks like this:

  
          UILaunchImageMinimumOSVersion
          8.0
          UILaunchImageName
          Dependent Files/[email protected]
          UILaunchImageOrientation
          Portrait
          UILaunchImageSize
          {320,568}
      
  

  And the image is really "dependent files /" and it is a PNG file. Little frustrating at the moment. I also tried to hack the PNG file in the root directory by renaming the ipa in zip, opening, sticky png, zip and rename it again. Does not work, the results in another error. Test the application locally with a developer certificate is ok, all right.

  If would be really grateful if anyone can share an example of work or at least say that it is possible to present something in the app store at all. At the moment I spend more time dealing with icons, screens spash, certificates, and provisioning of the files then actually coding.

  The "Application Loader" told me I have to change the MinimumOSVersion to 5.1.1 since he dislikes the 4.3 for some reason any.