Parameters of the OAM Agents
Hi Experts,I'm new to OAM11g.
While browsing the OAM Product Documentation, I came through the configuration of OAM Agents setting. I'm a bit confused between the two parameters.
1 Max connections
2 list of server principal & list of secondary servers: maximum connections
If I configure the values of Max Number of connections in
Primary list of servers: Max Number of connections: 5
List of secondary servers: Max number of connections: 8
then "" Max Connections"" value should be greater than 13 or 13. Correct me if I'm wrong. Please give a few examples to better understand.
Thanks in advance
Hi Sandy,
Maximum connections is the maximum number of connections on all servers OAM the WebGate is opened at any time; and Server List primary & secondary Server List: Max Number of Connections is the maximum number of connections that the WebGate will open to each such OAM server specified in the list.
In your example:
Primary list of servers: Max Number of connections: 5
List of secondary servers: Max number of connections: 8
You must "Max Connections" the value 8, because the WebGate is connected either to primary or secondary, not both at the same time. If you had defined 3 primary OAM servers each with 5 connections and 3 secondary servers with 8 connect, "Max Connections" should be set to 24 so that the WebGate to the benefit of the full contingent of connections to the secondary servers.
You can control the number of connections using netstat - you may notice one or two additional connections that the WebGate creates for the position of Director, the numbers specified in the oamconsole check to request the conversion of connections.
Kind regards
Colin
Tags: Fusion Middleware
Similar Questions
-
The NAC Agent autoUpgrade ISE possible?
Hi all
I have this:
802.1 x-window with the NacAgent version (say 1) <---->802. 1 x switch active (RADIUS aaa OK) <------>ISE and AD on the same LAN
ISE is configured for client provisioning with hardware (NacAgent version 2) downloaded from Cisco's Web site (as described in the documentation)
I have a basic plan of authentication and authorization that allow me to well but I expect the NACAgent to be upgraded.
No profiling is configured at the moment.
Is that someone can help?
Best regards?
Hello
In the ISE settings provisioning client, activate you the option where the NAC upgrade agent is required. However, it is to you to run updates perioidic and map the most recent agent in the configuration of the parameters of the client.
Thank you
Tarik Admani
------>---->
* Please note the useful messages *. -
ODI scenario failure during the passage of variables as parameters in the scenarios of the child
I have defined a script in such a way that the variables in this scenario will pull data from other tables of configuration and pass those values as parameters to another this scenario in the first scenario of parent. I tested in DEV and DEV, test environments that are shared with the same topology with repositories different works. It has worked well. But when I moved the code to the QA environment, then I get the following error message. While attemption to run the scenario with the following command,
Execution code:
OdiStartScen '-SCEN_NAME = XXXXX ""-SCEN_VERSION =-1 ""-LOG_LEVEL = 5 ""-PROJECT_NAME. "" "" PASS = # PROJECT NAME. V_PASS""-PROJECT_NAME.» DB_URL = #PROJECT_NAME. V_DB_URL""-PROJECT_NAME.» DB_SCHEMA = #PROJECT_NAME. V_DB_SCHEMA""-PROJECT_NAME.» DB_LINK = # PROJECT NAME. V_DB_LINK""-PROJECT_NAME.» DB_USER = # PROJECT NAME. V_DB_USER ".
Error message:
oracle.odi.oditools.OdiToolInvalidParameterException: error when setting the parameters on the tool
at com.sunopsis.dwg.function.SnpsFunctionBase.getCoreOdiTool(SnpsFunctionBase.java:618)
at com.sunopsis.dwg.function.SnpsFunctionBase.getSunopsisApi(SnpsFunctionBase.java:494)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.executeOdiCommand(SnpSessTaskSql.java:1431)
at oracle.odi.runtime.agent.execution.cmd.OdiCommandExecutor.execute(OdiCommandExecutor.java:44)
at oracle.odi.runtime.agent.execution.cmd.OdiCommandExecutor.execute(OdiCommandExecutor.java:1)
at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2913)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2625)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:558)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:464)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2093)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1889)
to oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor$ 2.doAction(StartScenRequestProcessor.java:580)
at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)
at oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor.doProcessStartScenTask(StartScenRequestProcessor.java:513)
to oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor$ StartScenTask.doExecute (StartScenRequestProcessor.java:1066)
at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)
to oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$ 2.run(DefaultAgentTaskExecutor.java:82)
at java.lang.Thread.run(Thread.java:662)
Caused by: java.lang.Exception: disagreement quote...!
at com.sunopsis.core.SnpsObject.extractParametersLine(SnpsObject.java:174)
at com.sunopsis.dwg.function.SnpsFunctionBase.getCoreOdiTool(SnpsFunctionBase.java:580)
... 18 more
The variable values for this new environment a probably double-quotes ("") or a special character which is to 'break' the command line. Use this trick ODI to understand all the variables values used in this step and use the values of the test in a procedure separate with just values, not variables:
http://devepm.com/2014/02/28/execution-variables-trick-for-old-versions-of-ODI/
It will be useful.
-
Error when setting the parameters on the tool
Hi experts,
I want to use ODIsqlunload, but it still gives the error. My win7 OS
error:
oracle.odi.oditools.OdiToolInvalidParameterException: error when setting the parameters on the tool
at com.sunopsis.dwg.function.SnpsFunctionBase.getCoreOdiTool(SnpsFunctionBase.java:620)
at com.sunopsis.dwg.function.SnpsFunctionBase.getSunopsisApi(SnpsFunctionBase.java:494)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.executeOdiCommand(SnpSessTaskSql.java:1415)
at oracle.odi.runtime.agent.execution.cmd.OdiCommandExecutor.execute(OdiCommandExecutor.java:32)
at oracle.odi.runtime.agent.execution.cmd.OdiCommandExecutor.execute(OdiCommandExecutor.java:1)
at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2906)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2609)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:540)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:453)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1740)
to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ 2.doAction(StartSessRequestProcessor.java:338)
at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:214)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:272)
to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$ 0 (StartSessRequestProcessor.java:263)
to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ StartSessTask.doExecute (StartSessRequestProcessor.java:822)
at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:123)
to oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$ 2.run(DefaultAgentTaskExecutor.java:83)
at java.lang.Thread.run(Thread.java:662)
Caused by: java.lang.Exception: ODI-30044: invalid parameter:-file
at com.sunopsis.dwg.function.SnpsFunctionBase.actionSetParameters(SnpsFunctionBase.java:251)
at com.sunopsis.dwg.function.SnpsFunctionBase.setParameters(SnpsFunctionBase.java:799)
at com.sunopsis.dwg.function.SnpsFunctionBase.getCoreOdiTool(SnpsFunctionBase.java:616)
... 18 more
and the code is:
"SnpsSqlUnload «-file=F:\temp/data_6001_1001.dat" "-driver oracle.jdbc.OracleDriver =" «-URL=jdbc:oracle:thin:@musty-Pc:1521:XE "-user = system-pass = < @= snpRef.getInfo ("SRC_ENCODED_PASS") @ > - file_format variable = - charset_encoding = UTF8 '-row_sep = \n" "-date_format = YYYY-MM-DD '-fetch_size = 1000 '-field_sep = #
Select / * + * /.
columns...
table...
where (1 = 1)
I have try this - settings file:
F:\data_6001_1001.dat
F:\test.txt
C:\Test\test.txt
C:/data_6001_1001.dat
C:\test/data_6001_1001.txt
c:/test/data_6001_1001.txt
C:\test/data_6001_1001.dat
all of them same result :(
Please help me experts :(Hi experts, I have solved my problem :))
my code like this:
"SnpsSqlUnload «-file=F:\temp/data_6001_1001.dat" "-driver oracle.jdbc.OracleDriver =" «-URL=jdbc:oracle:thin:@musty-Pc:1521:XE "- user = system-pass =<@=snpRef.getInfo("SRC_ENCODED_PASS") @=""> - file_format variable = - charset_encoding = UTF - 8 '-row_sep = \n" "-date_format = YYYY-MM-DD '-fetch_size = 1000 '-field_sep = #
Select / * + * /.But it's really strange! I change only the file--> FILE and driver---> DRIVER and row_sep--> ROW_SEP and etc...
I don't know why, but they should be higher. I did on linux OS 64 bit and no mistake.
But win7 it gave me error.I thik it's a bug...
@=snpRef.getInfo("SRC_ENCODED_PASS")> -
Don't know if I'm missing something, but should this API show the content type (application/x-www-url-formencoded) when there are values for the p_parm_name and p_parm_value parameters.
The example in the docs is a Yahoo API. I'm not sure that an individual (see: http://docs.oracle.com/cd/E23903_01/doc/doc.41/e21676/apex_web_service.htm#BABEDJHJ), and I think that it requires an appid (yahoo account), so I went with the example here:
http://developer.Yahoo.com/YQL/guide/YQL-code-examples.html#yql_php
If I run the following from a file html on my desktop, it works:
In other words, it returns a JSON result.<form method="POST" action="http://query.yahooapis.com/v1/public/yql"> <input type="hidden" name="q" value="select * from upcoming.events where location='San Francisco' and search_text='dance'"></input> <input type="hidden" name="format" value="json"></input> <input type="submit"></input> </form>
The raw data of HTTP are as follows:
POST http://query.yahooapis.com/v1/public/yql HTTP/1.1
Host: query.yahooapis.com
Connection: keep-alive
Content-Length: 110
Cache-Control: max - age = 0
Origin: null
User-Agent: Mozilla/5.0 (X 11; Linux x86_64) AppleWebKit/536.11 (KHTML, like Gecko) Ubuntu/12.04 Chromium/20.0.1132.47 Chrome/20.0.1132.47 Safari/536.11
Content-Type: application/x-www-formulaires-urlencoded
Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8
Accept-Encoding: gzip, deflate, sdch
Accept-Language: en-, FR; q = 0.8, fr; q = 0.6
Accept-Charset: ISO-8859-1, utf-8; q = 0.7, *; q = 0.3
q = select +upcoming.events+where+location%3D%27San+Francisco%27+and+search_text%3D%27dance%27 & format = json >
However, running the following returns nothing: (nothing, nothing of which depends on the parameters passed in)
Raw data from HTTP:set serveroutput on declare l_c CLOB; begin l_c := apex_web_service.make_rest_request( p_url => 'http://query.yahooapis.com/v1/public/yql', p_http_method => 'POST', p_parm_name => apex_util.string_to_table('q:format'), p_parm_value => apex_util.string_to_table('select * from upcoming.events where location=''San Francisco'' and search_text=''dance'':json'), p_proxy_override => 'http://192.168.1.3:8888'); dbms_output.put_line(substr(l_c, 1, 4000)); end;
POST http://query.yahooapis.com/v1/public/yql HTTP/1.1
Host: query.yahooapis.com
Connection: Keep-Alive
Content-Length: 106
Connection: close
q = 2 Select + % + of + coming % 2Eevents + where + % 3D 'San + Francisco' + and + % 3D search_text 'dance' & format = json >
I note that one key difference is that content type is not defined in the web service API.
It was just to test a public service. I note that the foregoing has slighty different encoding request (percentage of tanks). However, I experienced the same behavior on a procedure that I wrote (I can also give this example of test cases if you wish), which is where I first noticed the issue.
Using utl_http and affecting the type of application/x-www-url-formencoded content, does not solve the problem. However, just thought I'd see the possibility of using the service API Web that is made available.
The example is in the valid docs, or am I missing something obvious?
It's Dev days on ApEx 4.1 on the virtual machine in the RTO.
Thoughts?I had a similar problem:
apex_web_service.make_rest_request packaging missing header parmsI endedup an SR for Oracle to open. I discovered that the headers (content-type) are defined in global variables before calling apex_web_service.make_rest_request.
See http://docs.oracle.com/cd/E17556_01/doc/apirefs.40/e15519/apex_web_service.htm#autoId4 for a description of headers and cookies.
I endedup have to add the following to my code before apex_web_service.make_rest_request:
apex_web_service.g_request_headers (1) .name: = "Content-Type";
apex_web_service.g_request_headers (1) .value: = ' application/xml ';Once I did, my service works. Odd. Not sure why they did it this way because their internal packages use parameters of the header, but the wrappers do this way, I guess.
I hope this works for you!
Jennifer
-
Hello world
Im getting 404 error when accessing the url http:// < host_name > im content: 14100/oamconsole.
If I have access to http:// < host_name >: 14100/oam im getting the login of the OAM page but I'm system error. Please try your action again. If you continue to receive this error, contact administrator. in the browser.
In the log file I'm getting the following error...
< 9 April 2012 14:26:25 IST > < error > < HTTP > < BEA-101017 > < [ServletContext@458296091[app:oam_server module: oam path: / oam spec-version: 2.5], request: [weblogic.servlet.internal.ServletRequestImpl@1baf0b54
GET /oam/index.jsp HTTP/1.1
Accept: * / *.
Accept-Language: en - us
User-Agent: Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.1; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729 .NET CLR 3.0.30729; Media Center PC 6.0; MS - RTC LM 8; InfoPath.3)
Accept-Encoding: gzip, deflate
Connection: Keep-Alive
Root cause]] of ServletException.
weblogic.servlet.jsp.CompilationException: could not compile JSP index.jsp
index.jsp:2:4: no tag library could be found with this URI. Possible cause could be that the URI is incorrect, or there are errors during the analysis of the .tld file.
< uri prefix = "http://beehive.apache.org/netui/tags-html-1.0" %@taglib = "netui" % >
^----^
index.jsp:2:4: no tag library could be found with this URI. Possible cause could be that the URI is incorrect, or there are errors during the analysis of the .tld file.
< uri prefix = "http://beehive.apache.org/netui/tags-html-1.0" %@taglib = "netui" % >
^----^
index.jsp:3:4: no tag library could be found with this URI. Possible cause could be that the URI is incorrect, or there are errors during the analysis of the .tld file.
< uri prefix = "http://beehive.apache.org/netui/tags-databinding-1.0" %@taglib = 'netui - data' % >
^----^
index.jsp:3:4: no tag library could be found with this URI. Possible cause could be that the URI is incorrect, or there are errors during the analysis of the .tld file.
< uri prefix = "http://beehive.apache.org/netui/tags-databinding-1.0" %@taglib = 'netui - data' % >
^----^
index.jsp:4:4: no tag library could be found with this URI. Possible cause could be that the URI is incorrect, or there are errors during the analysis of the .tld file.
< %@taglib uri prefix = "http://beehive.apache.org/netui/tags-template-1.0" = "netui-template" % >
^----^
index.jsp:4:4: no tag library could be found with this URI. Possible cause could be that the URI is incorrect, or there are errors during the analysis of the .tld file.
< %@taglib uri prefix = "http://beehive.apache.org/netui/tags-template-1.0" = "netui-template" % >
^----^
at weblogic.servlet.jsp.JavelinxJSPStub.reportCompilationErrorIfNeccessary(JavelinxJSPStub.java:226)
at weblogic.servlet.jsp.JavelinxJSPStub.compilePage(JavelinxJSPStub.java:162)
at weblogic.servlet.jsp.JspStub.prepareServlet(JspStub.java:256)
at weblogic.servlet.jsp.JspStub.prepareServlet(JspStub.java:216)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:243)
Truncated. check the log file full stacktrace
>
I also tried http:// < host_name >: 7001/oamconsole but in browser im get internet cannot display the page *. [Admin even break and oamserver is in operating mode] * what url I have to use to get the OAM login page?
If I gave correct url I have to solve?
Please advice me?
Kind regards
KnaniHello
Here are the troubleshooting steps:
1. check if there was a refreshment which took place.
2 go and manually check if all policies configuration were relocated properly.
3. After all, the update of the measures conducted were restarted servers if not go and restart the server.Kind regards
Olivier B. -
Siri App Suggestions independently displays parameters in the iOS 10
Hello
I was wondering if anyone has seen this before and he knows a work-around?
I am unable to turn off Siri App Suggestions, I did the classic general > Spotlight search > Suggestions of Siri which I turned on or off times shared with restarts, but it still shows.
I even went as far as everything off in Spotlight search including all applications which has been laborious, but it still shows, guess it's bug, but I was wondering if someone else he met and may know a work around.
Hello John H0.
Thank you for using communities of Apple Support.If I understand your message that you want to disable the Suggestions of Siri. You started with a few great troubleshooting by enabling / disabling the on/off function again, restart and turn off everything in the Spotlight search parameters. The next step, I would recommend would be to reset all the settings. First of all, if you already create a backup file. Reset all settings returns settings to their default settings. A backup will allow you to return your old settings of your device. Once you have reset all the settings to disable Siri Suggestions again.
Reset iPhone settings
Without deleting your content, you can return the iPhone to their default settings. If you want to save the settings, save them in iCloud or save them using iTunes before you reset them.
To return the settings to their default values. Go to settings > general > reset, and then choose an option:
WARNING: If you choose the erase all content and SETTINGS, all your content is removed. See Erase iPhone.
Reset all settings: All settings are reset.
Best regards
-
I can't access iCloud parameters. The icon is there, but when I click on it nothing happens. I went into general settings to ensure that no restrictions were on. Also recently noticed that the personal hotspot service is no longer available on my phone. How something like that just disappears?
For Personal Hotspot, you must ask your cellular provider.
What setting iCloud does not work?
-
Upgrade to the latest version of Firefox, but the user agent remained at 3.6.
Mint Isadora 64-bit. Finally, I upgraded to the latest stable version 3.6 in the Launchpad repo. I can't install any addons now because addons.mozilla.com said I use 3.6. Troubleshooting information, it seems that my user agent still said 3.6. Subject: firefox said I use 6.0.1. How can I fix the user agent?
https://support.Mozilla.com/en-us/KB/websites+or+add-ons+incorrectly+report+incompatible+browser
-
I have 2 gmail accounts. 1 works fine, the other does not - but I can use very well with Safari. All parameters are the same. What should I do?
URL of affected sites
Try to clear your cache and cookies.
- Open the Tools menu, then select clear recent history...
- In the time range to clear: drop-down menu, select all.
- Click the arrow next to Details to display the list of items that can be cleared.
- Select Cookies and Cache.
- Click clear now.
-
I have to change some settings in my bios so that I can start my CD of restoration but whenever I click on the parameters of the UEFI firmware and select restart it never brings the Bios screen.
When the computer begins to boot, start to type the F10 key continuously. This should access the BIOS.
Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.
-
Cannot change the HARD disk parameters in the Bios on Satellite A200
I can't change the hard disk parameters in the bios for my satellite A200-1The
This bios does not support changing the parameters of the hard disk for example SATA to IDE?
BIOS version is: 5.6AFAIK in BOS advanced settings you can change mode SATA controller only. You can use the AHCI mode or compatibility.
I put t understand why do you think you can use IDE mode. What you want to do exactly?
-
documentation for the sequence file report does not display the parameters of the step
The parameters of the step is missing in this report. Is it possible to add this just as you have included the sequence settings. Thank you.
Sequence: MainSequence
Type: Normal
Disable the results for all stages: false
Goto cleanup in case of failure: use the Station Option
Number of installation steps: 2
Number of steps: 10
Number of steps of cleaning: 2
Parameters:
PartNumber String (by reference)-Stage: Installation Instruction
StepType, adapter: Message Popup.
Description: NameOf (Step)
Module loading and unloading Options: preload the beginning of execution, discharge the closure of movie file
Record results: disabled
Flow properties: Post Action:
If)
GoTo
Record result: disabledI agree that it's frustrating. I had the same problem recently.
You should post it in the forums of idea: http://forums.ni.com/t5/NI-TestStand-Idea-Exchange/idb-p/teststandideas
Or you can change the sequence that generates these and include parameters. The source so that it is in:
\Components\Tools\DocGen Hope this helps,
-
Pass the parameters to the callback SequenceFilePostStep
I have to call a sous-suite with several parameters in case of RunTimeError one of my steps in the main sequence. I would replace the SequenceFilePostStepRuntimeError callback for this.
The recall starts ok but no parameter not passed. I don't see a way to explicitly set the parameters of the callback call (as we have for calls to subsequence) so I just created parameters of the same name, in the MainSequence and the SequenceFilePostStepRuntimeError.
I saw this post , but it does not describe how to pass parameters to a callback.
Please see attached the sequence. The SequenceFilePostStep callback is used for demonstration purposes.
Hello
One way that you can try.
Instead of having Parameters.Message use a local variable. Replace your Parameters.Message Locals.Message in two clips (MainSequence and SequenceFilePostStep).
In the SequenceFilePostStep the Locals.Message a "Allow the spread of the appellant" (select right mouse click and variable of Locals.Message, you should see two options)
In the MainSequence put the Locals.Message to "spread of subsequence.
Make sure that change you the MessagePopup to use local variables > message and Locals.Message with your message in your approach to expression.
Now when you run your MainSequence you should see your message in the dialog box.
I hope this helps.
Concerning
Ray Farmer
-
How to change the HARD drive internal with the boot agent intel
HP Pavilion DV 6135nr
Windows XP media center edition
Replaced the drive HARD internal and have error with boot agent intel.
How to disable a intel boot agent.
Helllo machadoas,
You want to disable the Intel boot agent.
You should be able to load in the BIOS at startup by pressing F10, go to boot order and move boot agent under the HARD drive.
Here is a link that talks a little more about the boot agent.
Let me know if it helps.
Maybe you are looking for
-
Terminal to disable startup chime
I want to stop the startup chime and the normal terminal script, (sudo nvram SystemAudioVolume = 80%) "does not work because of a password problem. After you enter the script Terminal asks for my password. I provide the password and terminal says "co
-
is this official mail of hotmail ac id
E-mail address is removed from the privacy * is this official mail id from Hotmail ca, because I get mail tht I update what I use it by link from hotmail AC, so I do not know is this true or false id, by pirates
-
open ports 5198. 5199 for Echolink
open ports to enable echolink work fully.
-
No sound on my videos? Help, please!
I'm trying to get a video I got from a mobile phone to friends to play after that I downloaded from my email. He plays, but there is no audio data. I downloaded VLC media player and there is audio but I need of me able to put it into the program of V
-
I was warned of an HP update last night. After the update is complete, Itunes/MS media player/You-Tube...applications are unable to play. Check installed programs and the only update listed was one of IDT drivers. How can I go back to the previous