Similar Questions

• Parameters of the assistance service Console, need to change the console

  Hello

  While attempting to rework is nic mappings for port includes all my NIC where put in a vSwitch and I lost the status of the connection to the esx server. How you edit the network settings on the console to change the network settings.

  After the link I have given, you should be able to correctly move things.  You will however need to be standing in front of the console or have some sort of connection available as remote ILO or DRAC console.

  When you are finished, you must restart pass

  service mgmt-vmware restart

• Install the ear of Console - cannot run the application.

  JDeveloper 12 c 32bits.

  I'm checking my ear is produced correctly by deploying the console of weblogic (which is really just the integrated environment).

  The installation says it works great... but I can't launch the web page by using the same URL I used the deployment of Jdeveloper.

  I was capable of that test applications with little (with security). But the Application that I just spent a month of work on is a failure!

  Some features:

  The ADF security is on.  I have an application role, two users, and set up a same business role.

  users are granted to the role of the company.

  The role of the App is given to the role of the company

  Each workflow task and web pages are granted to the role of an application.

  WebLogic is configured with users and the role (which both correspond to users and the enterpise role in the security of the adf).

  The screen 'set up the Security deployment.

  Checked the weblogic application update. XML with the following parameters

  Application enabled policies

  Uncehcked credentials

  Groups and users not controlled

  Unchecked Auto generate and synchronize Weblogic JDBC descriptors during deployment

  Can I deploy on Jdeveloper to Weblogic Server the Integrated and it works.

  Connect the output: I get this when deploying Jdeveloper (it works) and when I install the ear to Weblogic (installation works, but I can not run the application).

  < 25 November 2015 14:54:52 this > < WARNING > < Application customer > < BEA-2162200 > < no hand-class defined in the Java Module manifest file: empty.jar. This module will be treated as a utility JAR and subsequent initialization steps will be skipped. >

  < 25 November 2015 14:54:55 this > < WARNING > < oracle.jps.credstore > < JPS-01033 > < cannot set credentials. The oracle.security.jps.service.credstore.CredentialAlreadyExistsException pattern: JPS-01007: identification with the card AISMainMenu-4131 and anonymous #ERPD key information already existing... >

  < 25 November 2015 14:54:55 this > < WARNING > < oracle.jps.upgrade > < JPS-06003 > < cannot migrate the information to key/identification of the AISMainMenu-4131/anonymous file #ERPD. The oracle.security.jps.service.credstore.CredentialAlreadyExistsException pattern: JPS-01007: identification with the card AISMainMenu-4131 and anonymous #ERPD key information already existing... >

  < 25 November 2015 14:54:57 this > < WARNING > < HTTP > < BEA-101384 > < WLServlet annotation is deprecated, use instead servlet 3.0 annotation. App:AISMainMenu@AISMenu, Class: oracle.adfinternal.view.faces.activedata.AdsServlet >

  I can deploy from Jdeveloper, but if I have a deployment on the built-in console (an ear file) of weblogic server, I can not run the application.

  I get the wrong URL?  It should be the same as the deployment of Jdeveloper on the integrated server.

  Thank you

  Stuart

  This is the error

  Error 404 - not found

  Of RFC 2068 Hypertext Transfer Protocol - HTTP/1.1: 10.4.5 404 not found Server not found anything matching the request URI. No indication is given whether the condition is temporary or permanent.

  If the server does not wish to make this information available to the client, the status code 403 (refused) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through a configurable mechanism, that an old resource is permanently unavailable and has no forwarding address

  Timo, Dario,

  I finally got to work.  I fiddled around so much with her, I don't know exactly what fixed - or a combination of two settings.

  Thank you very much for your help!

  Stuart

• Siri App Suggestions independently displays parameters in the iOS 10

  Hello

  I was wondering if anyone has seen this before and he knows a work-around?

  I am unable to turn off Siri App Suggestions, I did the classic general > Spotlight search > Suggestions of Siri which I turned on or off times shared with restarts, but it still shows.

  I even went as far as everything off in Spotlight search including all applications which has been laborious, but it still shows, guess it's bug, but I was wondering if someone else he met and may know a work around.

  Hello John H0.
  Thank you for using communities of Apple Support.

  If I understand your message that you want to disable the Suggestions of Siri. You started with a few great troubleshooting by enabling / disabling the on/off function again, restart and turn off everything in the Spotlight search parameters. The next step, I would recommend would be to reset all the settings. First of all, if you already create a backup file. Reset all settings returns settings to their default settings. A backup will allow you to return your old settings of your device. Once you have reset all the settings to disable Siri Suggestions again.

  Reset iPhone settings

  Reset iPhone settings

  Without deleting your content, you can return the iPhone to their default settings. If you want to save the settings, save them in iCloud or save them using iTunes before you reset them.

  To return the settings to their default values. Go to settings > general > reset, and then choose an option:

  WARNING: If you choose the erase all content and SETTINGS, all your content is removed. See Erase iPhone.

  • Reset all settings: All settings are reset.

  Best regards

• I'm unable to access iCloud parameters, that the icon is there, but when I click it, it does nothing. Also recently I noticed that my personal hotspot option is no longer available. Nobody knows what can happen?

  I can't access iCloud parameters. The icon is there, but when I click on it nothing happens. I went into general settings to ensure that no restrictions were on. Also recently noticed that the personal hotspot service is no longer available on my phone. How something like that just disappears?

  For Personal Hotspot, you must ask your cellular provider.

  What setting iCloud does not work?

• How to install the Microsoft Management Console?

  Hello

  I have a Satellite (S1800-412) with Win XP.
  Now I need to install the Microsoft Management Console on, but I have not possibility, because I have only Toshiba CD-ROM product recovery.

  to install the Microsoft Management Console, I should have the XP installation CD, but I did not.
  So my question is:
  What can I do with Toshiba CD-ROM product recovery to install on my satellite Microsoft Management Console?

  I'm trying to understand the policy of Microsoft and Toshiba, but it doesn't look good when I spend much for the XP system and I don't have the cd it wit.

  How can I solve my problem?

  I need to get an answer as soon as POSSIBLE!

  Concerning

  Stan

  Haha! It's easy:

  1. click on run.
  2. type in mmc.exe
  3. press enter
  4. There you are

  :)

  Where is my reward? (:)

• I have 2 gmail accounts. It will work correctly will not. All parameters are the same. What do do?

  I have 2 gmail accounts. 1 works fine, the other does not - but I can use very well with Safari. All parameters are the same. What should I do?

  URL of affected sites

  http://https://www.google.com/accounts/ServiceLogin?service=mail & passive = true & rm = false & continue=https%3A%2F%2Fmail.google.com%2Fmail%2F%3Fui%3Dhtml%26zy%3Dl & ASB = 1eic6yu9oa4y3 & ss = 1 & = 1 CSC < mpl = default < mplcache = 2 & hl = in

  Try to clear your cache and cookies.

  1. Open the Tools menu, then select clear recent history...
  2. In the time range to clear: drop-down menu, select all.
  3. Click the arrow next to Details to display the list of items that can be cleared.
  4. Select Cookies and Cache.
  5. Click clear now.

• Pavilion 20 all in one pc: my UEFI Bios does not appear when I click on the parameters of the UEFI firmware

  I have to change some settings in my bios so that I can start my CD of restoration but whenever I click on the parameters of the UEFI firmware and select restart it never brings the Bios screen.

  When the computer begins to boot, start to type the F10 key continuously.  This should access the BIOS.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Cannot change the HARD disk parameters in the Bios on Satellite A200

  I can't change the hard disk parameters in the bios for my satellite A200-1The
  This bios does not support changing the parameters of the hard disk for example SATA to IDE?
  BIOS version is: 5.6

  AFAIK in BOS advanced settings you can change mode SATA controller only. You can use the AHCI mode or compatibility.

  I put t understand why do you think you can use IDE mode. What you want to do exactly?

• Re: How to access the Windows Recovery Console?

  How can I access the Windows Recovery Console. The State of KBs Microsoft it may be accessessed to start with the DVD of the OS. However, you provide OS DVD only Toshiba recovery disks. When I boot them it gives only the option to erase all data and restore the original state.

  I have a Toshiba Qosmio F10 running Windows 7 32 bit.

  The reason why I need the recovery console is due to a breakdown of chkdsk which results now it running whenever I start up and hanging each time. Other Articals MS say I can get out of this infinite loop by using the Windows Recovery Console.

  > I have a Toshiba Qosmio F10 Windows 7 32 bit.
  Are you sure you have Qosmio F10?

• documentation for the sequence file report does not display the parameters of the step

  The parameters of the step is missing in this report. Is it possible to add this just as you have included the sequence settings. Thank you.

  Sequence: MainSequence
  Type: Normal
  Disable the results for all stages: false
  Goto cleanup in case of failure: use the Station Option
  Number of installation steps: 2
  Number of steps: 10
  Number of steps of cleaning: 2
  Parameters:
  PartNumber String (by reference)

  -Stage: Installation Instruction
  StepType, adapter: Message Popup. 
  Description: NameOf (Step)
  Module loading and unloading Options: preload the beginning of execution, discharge the closure of movie file
  Record results: disabled
  Flow properties: Post Action:
  If)
  GoTo
  Record result: disabled

  I agree that it's frustrating.  I had the same problem recently.

  You should post it in the forums of idea: http://forums.ni.com/t5/NI-TestStand-Idea-Exchange/idb-p/teststandideas

  Or you can change the sequence that generates these and include parameters.  The source so that it is in: \Components\Tools\DocGen

  Hope this helps,

• Pass the parameters to the callback SequenceFilePostStep

  I have to call a sous-suite with several parameters in case of RunTimeError one of my steps in the main sequence. I would replace the SequenceFilePostStepRuntimeError callback for this.

  The recall starts ok but no parameter not passed. I don't see a way to explicitly set the parameters of the callback call (as we have for calls to subsequence) so I just created parameters of the same name, in the MainSequence and the SequenceFilePostStepRuntimeError.

  I saw this post , but it does not describe how to pass parameters to a callback.

  Please see attached the sequence. The SequenceFilePostStep callback is used for demonstration purposes.

  Hello

  One way that you can try.

  Instead of having Parameters.Message use a local variable. Replace your Parameters.Message Locals.Message in two clips (MainSequence and SequenceFilePostStep).

  In the SequenceFilePostStep the Locals.Message a "Allow the spread of the appellant" (select right mouse click and variable of Locals.Message, you should see two options)

  In the MainSequence put the Locals.Message to "spread of subsequence.

  Make sure that change you the MessagePopup to use local variables > message and Locals.Message with your message in your approach to expression.

  Now when you run your MainSequence you should see your message in the dialog box.

  I hope this helps.

  Concerning

  Ray Farmer

• How to run and pass parameters to the exe file in the txt file.

  Hello

  I am facing problem with passing parameters in the .exe file, which is run by labview.firstly that I have script .txt with the settings that I have to go to the .exe file. This .exe file is also a software, and this script is written for her. And now I have to create program in labview which should satisfy the following points.

  1. I have to use a button named "Run script". If I pressed the button, it should open the browser where I can choose the script .txt file.

  2 .exe application is expected open(Path already chossen).

  3. After passing the .exe application settings should be closed.

  4 and labview should now update its parameter

  I just open using Exce.vi .exe file, but I didn't get any idea to do more than this.can someone please help me?

  Thanks norbert. CAN I love it? What should I change now? VI attached below...

• Need urgent help! In my Vision Application, how to extract the parameters of the geometric model specified curve was generated by the template editor OR?

  I have an application of machine vision, in which the geometric pattern match technique was used to find the target in the images of type variant.

  as we know, we do a geometric model by model OR editor in the editor we can adjust the parameters of the curve specified settings to get the desired curves and we derive the custom box to ignore during the match. then we save the use of the same model in our application of vision.

  Now my question is coming. When I program my request for the geometric game. I have specified the parameters of the curve for the entrance of the IMAQ Advanced Setup learn ringtone 2, of course, I have to adjust this identical to the model, but I don't know how we extract the geometric model. I tried all the methods, for example, I can read data custom, IMAQ get characteristics of the geometric model(it's just for the basic functionality? so is there even a VI based edge?), even at anasys PNG file formats! But I can't read the info of the geometric model by myself!

  It is also illogical to adjust the CURVE SETTINGS manually again for the " IMAQ Advanced Setup Learn Pattern 2" after that I already have in the template editor OR!

  Hello

  Why do you need to specify the curve settings once again, if you have already built a model using the template editor? You don't need to use "IMAQ Advanced Setup learn geometric model 2 VI" to find games (see the attached example).

  You can wire the 'curve settings' control to 'IMAQ configuration geometrical game model 2 VI', but the values are not used if wire you a Boolean true to the node "use learning curve settings" (it's like that by default). To prove it, I enclose a small program with pre-created model (using the template editor) for a geometrical alignment. The model and the test of three images are also included.

  Try changing the settings of the curve with the 'use know curve settings' enabled, and you will see the corresponding score remains the same. Disable the Boolean control, then try to change the curve settings.

  Also take a look at the detailed help for "IMAQ configuration geometrical game model 2 VI", specifically the "learning curve parameters of use."

  I hope this helps.

  Best regards

  K

• Problem using the Overdrive Media Console software program

  When I try to download audio files using the Overdrive Media Console program (used by the public library in my area) I get the error message "error) xC)) D2781: problem occurred in the identification of rights management digital retriving.»   What is the reference for this?

  Hello

  • What is the format of audio file you were trying to play?
  • What version of Windows are you using?

  You can follow below link that can help you to solve your problem:

  http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=11.0.5721.5145&ID=C00D11E2&ContextId=71&OriginalID=C00D2781