"Parental control cannot connect to the Internet from this computer. There might be a problem with you, Internet connection...

Similar Questions

• When I start my computer I get the message "Windows Live Mesh, there might be a problem with your internet connection make sure computer connection and try again, I run Windows Vista"

  I run Windows Vista.   Recently on commissioning the first thing that appears on my screen is a 'Windows Live Mesh' message, "there could be a problem with your internet connection.

  connection.   Ensure that the computer is connected to the internet and try again".

  My computer is connected to the internet, and it works very well.   How can I get rid of this annoying message.

  I tried all means to find this file on my computer, but it does not appear to be

  Can you help me please

  Mike Gray

  Hello

  
  Were there any changes (hardware or software) to the computer before the show?
  
  Perform the check and the boot if the problem persists.
  
  To help resolve the error and other messages, you can start Windows XP, Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
  
  Note: Follow step 7 to reset the computer to start as usual after the boot process.
  
  http://support.Microsoft.com/kb/929135 
  
  Hope that helps.

• Windows store error "we could not connect to the Bank. This can occur because of a problem with the server or the connection may have expired. Please wait a few minutes and try again. »

  Original title: Windows 8 store does not.

  Whenever I try to open the windows store, I get the message: "we could not connect to the Bank. This can occur because of a problem with the server or the connection may have expired. Please wait a few minutes and try again. »

  This happens constantly, and because of that I have not been able to upgrade to Windows 8.1.

  Hello

  This behavior can occur if the antivirus application blocking the app Store or changes due to some recent on the computer.

  I would suggest trying the following steps and check if it helps.

  Method 1:

  Make sure that your PC is up to date

  Make sure that updates are installed on your PC and that your antivirus program does not prevent the application from running. For more information about installing updates for your PC, see Windows Update: frequently asked questions.

  Method 2:

  Run 'Windows Apps Store' convenience store

  You must be logged in as an administrator in order to run the "Windows Store Apps" troubleshooter. This tool can automatically find and fix some issues with applications. It is available in English only, but will work in all languages. You can let automatically try to fix any problems found, or select what you want made repairs.

  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

  Method 3:

  I suggest you delete the Windows Store cache and check how it works.

  1. Press Windows + R logo
  2. Type wsreset.exe in the run window, and then press ENTER.

  Method 4:

  Define the Apps approved in third program Antivirus- If you have a third party AV program installed, check its settings to make sure that the app Store works is not changed to be approved. If the AV program has the app as unreliable, it will block and prevent opening the app.

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• Hello. I'm just a beginner and I downloaded the itunes 12.3.3 update and now when I right click on a work of art albums all disappear from the track of this album. I also have problems with my get info tab. All of my info from the album crashes.

  Hello. I'm just a beginner and I downloaded the itunes 12.3.3 update and now when I right click on a work of art albums all disappear from the track of this album. I also have problems with my get info tab. All of my info from the album crashes.

  This can help (from turingtest2):

  Fix iTunes for Windows security permissions

• How can I add an ID related when I get this message (there is a temporary problem with the service. Please try again. If you continue to receive this message, try again later.) ?

  How can I add an ID related when I get this message (there is a temporary problem with the service. Please try again. If you continue to receive this message, try again later.) ?

  Hello

  an answer your other thread

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/why-do-i-keep-getting-your-Windows-Live-ID-cant-be/268ff99c-E459-E011-8dfc-68b599b31bf5?page=1&TM=1301396733390#footer

• There might be a problem with the configuration of your DOMAIN NAME SERVER

  Last week one, I noticed some problems with my internet connection. I have a BSNL broadband connection. I am connected to the internet, and after some time all of a sudden, I'm not able to connect. My modem lights are all on and on my laptop, I see the symbol of 2 computers with a note on it, which means that I'm connected. But still the pages not displayed. When I run Network Diagnostics (I Windown Vista) I get the error message saying: "there could be a problem with the configuration of your DOMAIN NAME server. I turned off the computer and the modem and switch it on after a long time... He would return but loses the connection with the same error message again. What can I do? I tried to reset the modem, also tried the system restore. What can I do? Please help me. I have laptop Dell Insipiron with Windows Vista and I connect wireless.

  We do not know how your system should be set up - including the DNS configuration and settings.  I recommend you contact your ISP's technical support group and get help from them in the configuration of your computer (and test lines and modem - the problem could be the modem and not on the computer or it could even be the service provider itself).  It can be something as simple as a typo or a box checked or not checked - I do not know because I do not know their settings (different for each access provider).  Give them a call.  I do so often when I have connection problems, and they are almost always useful, or schedule a service call if they cannot help.  I think it's your best chance to solve this problem.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I can't findhow to correct parental control for content on the internet

  don't know how to find the parental controls to change the settings for content on the internet.

  Hello

  What version of Internet Explorer is installed on the computer?

  If there are specific Web sites that you want to block or to allow explicitly, follow these steps. This setting overrides the sides that maybe having the site.

  1. open Internet Explorer by clicking the Start button. In the search box, type Internet Explorer, and then in the list of results, click Internet Explorer.

  2. click on tools and then click Internet Options.

  3. click on the content tab and then, under Content Advisor, click settings.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  4. in the Supervisor Password Required dialog box, type your password, and then click OK.

  5. click on the approved Sites tab.

  6. under allow this Web site, type the URL of the site you want to allow or block, and then select always or never to allow or block the Web site.

  7. click on apply to save the settings and then click OK.

  Refer to the section on Windows XP to set parental controls in Windows XP

  How to use parental controls in Windows

  http://www.Microsoft.com/athome/video/parentalwin.aspx#fBid=ED4nv6QnuBS

  Using Content Advisor to block inappropriate web content

  http://Windows.Microsoft.com/en-us/Windows7/using-Content-Advisor-to-help-block-inappropriate-Web-content

  Hope the information is helpful and let us know if you need more assistance.

• Problem with password reset link - "there is a temporary problem with the service. Please try again. If you continue to receive this message, try again later. »

  Hello, account Windows Live from my wife was hacked a week ago and has been used to send many spam emails. As a result, his account has been disabled or closed (we are not sure). Whenever she asks to reset a password and a link sent to a different e-mail account, when she clicked it gets this message 'there is a temporary problem with the service. Please try again. If you continue to receive this message, try again later. "She is tried repeatedly, but get the same message. Someone knows how to go beyond that, so she can recover her account? Thank you.

  Hello BBB34,

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

• Windows XP cannot see that the internet can only see LAN

  We have a small network in my house. My router was set to WEP security (I know its too old, but my windows xp laptop computer does not work with WPA or newer). And I also added mac filtering for more security addresses. This network has worked well for 2 years.

  Meanwhile in a cell phone (that has windows XP sp3) so its wireless network broke, and we couldn't get living, then we just plugged on the router via a cable.

  Recently I had to reset my router because I forgot a password and I could add anything to the mac filter list.

  After that, I put at 'the original' for example WEP + mac filtering (only the passwords have been changed).

  Now everything is working fine, 2 laptops (both Windows 7 a), 2 readers, network all our phones smart etc can connect again, the only laptop (with Windows XP) problem.

  The XP laptop can see LAN (two disks) and router only (ping works), but in any browser (firefox, chrome, iexplorer) give me a Web site cannot loaded in the background: error 105, Err_name_not_resolved.

  I tried names ping (google.com) and different ip addresses (for example my ISP dns server address) but I get no answer 100% packet loss. I tried a lot of things that they did not help

  (1) has tried to change my XP for some fix + fix dns ip (I found these adressis in my router configuration/network configuration)
  (2) then I put back to dynamic ip once again in the line of cmd ipconfig release, ipconfig/reset, etc., I checked all addresses was going well everywhere (I mean gateway, DHCP server, dns server, looked well with dynamic ip too)
  
  (3) then I found similar position
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-Networking/cannot-ping-outside-my-local-network/de73a1f9-ef4b-E011-8dfc-68b599b31bf5
  so I tried also what is in the post
  "netsh winsock reset" "netsh int ip reset" then "ipconfig/flushdns" then restart computer

  Nothing helped so I registered here, maybe I answer.

  you might need this information:

  the laptop has Windows XP service pack 3 language _german_
  Cisco EPC2425 router is
  The two networks wdstorage discs + mybookworld... I think they are the two Western Digital stuff. I'm not sure, I can look after if its important (I don't think)
  So, I got two disks still attached. (so 3 connection of the UTP in the router is used, two for disks for the windows XP laptop)

  If something is not clear, ask me please

  
  Thank you for your answer
  Robert

  Hi Robert,.

  Thank you for updating us the status of the case.

  I suggest that temporarily disable you the firewall.

  I recommend you to test name resolution

  A DNS server provides host name resolution. If you cannot connect to a server on the Internet by using its FQDN, there could be a problem with the DNS configuration of your dial-up connection to your ISP or DNS server of your ISP.

  To determine if there is a problem with the DNS configuration of your dial-up to your ISP connection, follow these steps:

  a. at a command prompt, type ipconfig/all, and then press ENTER to display the IP address of your DNS server. If the IP address of your DNS server does not appear, contact your ISP for the IP address of your DNS server.

  (b) to verify that your computer can communicate with your DNS server, ping IP address of your DNS server. The response looks like this:

  Rattling #. ###. ###. # with 32 bytes of data:

  Response to #. ###. ###. #: bytes = 32 time = 77ms TTL = 28
  Response to #. ###. ###. #: bytes = 32 time = 80ms TTL = 28
  Response to #. ###. ###. #: bytes = 32 time = 78ms TTL = 28
  Response to #. ###. ###. #: bytes = 32 time = 79ms TTL = 28

  The series of digital signs (#. #. #. #) represents the IP address of the DNS server.

  If you can't ping the IP address of the DNS server successfully, contact your ISP to verify that you are using the IP address and the DNS server is working properly.
   
  When you have verified the correct IP address of your DNS server, update the settings of your connection to your ISP's dial-up TCP/IP. To change or add a valid IP address for your DNS server for a dial-up Networking phonebook entry, follow these steps:

  a. in Control Panel, double-click network connections.

  b. right click on your Internet connection, click Properties and then click the network tab.

  c. click the Internet Protocol adapter, and then click Properties.

  d. click use the following DNS server address, and then type the correct IP address in the preferred DNS server box.

  e. click OK, and then click OK again.

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• Windows XP Office cannot receive all the files from my Windows 7 laptop.

  I have a desktop running WMP 11 on XP and a laptop computer under WMP 12 on Windows 7. Both are connected to the desktop computer even router-, mobile - wireless ethernet.
  Problem is my laptop can receive files that are shared in my office... but my office cannot receive all the files from my laptop, all two media sharing enabled and have all two disabled firewall.

  BTW, I've noticed that my office does not appear on my local network or all networks under "media streaming options" on my laptop...

  original title: the windows media player 12 does not share with WMP 11 (completely)

  Hello

  1 have had modifications made to your computer before the problem occurred?

  2. did you install or uninstall all the programs on your computer until the problem occurred?

  3. do you get an error message or error code when you access or file sharing on the network?

  4. what security (Antivirus & Firewall) program is installed on your computer?

  5. were you able to access shared files and folders on your laptop from your desktop earlier?

  I suggest you to follow a few troubleshooting steps and check if that help in the issue of the attachment on your computer.

  Method:

  Sharing files in Windows 7 and XP

  Sharing folders between two Windows 7 machines with the new homegroup feature is an easy process, but the homegroup feature is not compatible with Vista or XP.

  First of all, make sure that both computers are members of the same workgroup which by default is named Workgroup.

  a. on the Windows 7 machine go into control panel-all items in the control panel-network and sharing Center then click on change sharing settings, advanced.

  b. you want to check the following settings under Advanced for home or work and Public profile sharing settings.

  ·         Turn on network discovery.

  ·         Printer sharing and file.

  ·         Turn on sharing so anyone with network access can read write files in public folders.

   

  c. If you want any user to access public actions disable password protection.  It is located in the sharing settings advanced to the bottom of the list (protected by password sharing).

  ·         Turn off password protected sharing.

   

  d. If you want to keep it enabled, make sure that there is a newspaper account that the other XP machine and they have a password.

  e. over on your XP machine open my network places to search for the shared folder of Windows 7.

  f. double-click the shared folder to find a list of shared folders in the folder Public of Windows 7.  If you have password protection enabled you will have to type the user name and password of the user account on the windows 7 machine first.

  Check out the links below and check if this is useful:

  Networking of computers running different versions of Windows
  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

  Sharing files and printers with different versions of Windows
  http://Windows.Microsoft.com/en-us/Windows7/help/sharing-files-and-printers-with-different-versions-of-Windows

  Hope this information helps you.

• Error message "unable to make changes to parental controls settings. If the problem persists, see your system administrator"when you set parental controls for a user account

  Original title: user account with an effort of parental control

  After logging in to my admin account, I created two user accounts for my children, set up parental controls for both that I created, when I tried to set up the third account that he would allow me to activate parental control. It seems that he is trying to load the screen to give me the parental control options then the window disappers and another small window appears saying "cannot make changes to parental controls settings. If the problem persists, see your system administrator. I close the window, and then open the parental controls for other accounts, and they work very well, allows me the chance to change. I deleted the third account several times, making sure to create on behalf of others, just like I did the first two. Still no luck. Can I have only 3 total accounts? My administrator account and standard users 2.

  How can I get a standard user account third with parental controls?

  Hello

  Create a new user account and check if the problem persists, the problem does not persist in the new user account, then fix the damaged user account.

  Create a user account (Windows Vista)

  Screw a damaged profile (Windows Vista)

  Check out the link below to check if the parental control is correctly defined

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-parental-controls

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-parental-controls-activity-reports

  Hope this information helps.

• I installed AVG 9.0 and now I get the following MSN Explorer pop up of message.__You are unable to connect to your e-mail server. There may be a problem with your Internet connection, or a problem with the mail server. Pleas try again.

  I installed AVG 9.0 and now I get the MSN Explorer pop next message.
  You can not connect to your mail server. There may be a problem with your Internet connection, or a problem with the mail server. Pleas try again.

  Sure.  Analysis of your e-mail anti-virus program:

  • Can slow to receive and send messages, or even fail.
  • Can damage files of storage for messages that you've already sent and received, making it inaccessible messages.
  • Is not necessary.  If you receive an infected attachment and try to open it, the protective device in real time of your antivirus program will block the infection.

  Here are a few web pages accurately:

  Why you don't need your anti-virus program to scan your e-mail
  The other threat email: the Corruption of files in Outlook Express
  Why some antivirus software can change the settings in e-mail programs
  Email scanning - advantages and disadvantages

• my pc will not connect to wireless internet... It is said there could be a problem with the driver for the wireless network connection card

  connection network card

  my pc will not connect to wireless internet... It is said there could be a problem with the driver for the wireless network connection card... I'm not sure how to solve the problem of the dat

  Hello

  Did you change your computer?

  I suggest you to follow the links and check out them.

  The problems of Internet connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Solve problems, find wireless networks

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Tips for solving common driver problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems

• Parental controls does not: Impossible to make changes to parental controls settings. If the problem persists, see your system administrator.

  Original title: Parental control does not

  Try to set up Parental controls for my son's account. I have an account manager, go to control panel / user accounts / parental control - click on windows expects to obtain two error message with the same message: "unable to make changes to parental controls settings. If the problem persists, see your system administrator. "I'm a sysadmin, so what's the problem?

  On a side note, I have two children on this computer. Had to remove my son because he downloaded a virus. So before the two children had parental control. But when we were going to change their times permit, he would give this error message but weather changes would take place. Now that I am setting up a new account for him, can't get parental controls to work.

  Hello

  Step 1: turn off UAC (User Account Control) and check the result

  See how can I change the behavior of user account control by using the slider? :http://windows.microsoft.com/en-US/windows7/How-do-I-change-the-behavior-of-User-Account-Control-by-using-the-slider

  Note: You must restart your computer when you enable or disable UAC. Change levels of notification does not require that you restart your computer.

  Step 2: I suggest to create a new administrator account and log later in the new administrator account, try to set parental controls and check if it works.

  Create a user account

  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  Check out the link below to check if the parental control is correctly defined

  http://Windows.Microsoft.com/en-us/Windows7/set-up-parental-controls

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I have managed to remove the LR5 from my computer and cannot find a way to recharge.  I have set up (24 issues)

  Hello

  I managed to remove the LR5 from my computer, im not sure how I can recharge it.  I have the code number 24.  Hopethat someone can point me in the right direction.  Thanks Richard

  Lightroom - all versions

  Windows

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Windows

  Mac

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh